Billing Custom Variant Help

Hello Experts!
I've been assign with a new requirement for a utility company where I have to create a custom billing variant to determine if there is an active contract (division) on the customer account if so, the customer will be charge with a $1.50 processing fee and add this custom variant to the rate steps, this is my first assignment in billing and don't have much experience so I will really appreciate if someone point me in the right direction or give me some help with this, thanks in advance.
Regards
Norman Vargas

I had to google Halma to see what you were talking about...yes it is very similar. I need a layout sorta like that.

Similar Messages

Custom search help for characteristic based variant

Dear Experts,
I have characteristic based variant report, my requirement is, in any Article(matnr) related transaction( Ex: MM43, VA01..) I required custom search help based on these characteristics and i will populate article/variant. Attached report selection screen snap. This screen will come in my custom search help.
Regards,
Abbas.

I have found own for my problem. I am using MAT1 standard search help and with database view.
Regards,
Abbas.

Based on Characteristics, populate variants/article through custom search help

Dear Experts,
In IS-Retail, MM43 transaction, based on characteristics how to display variant number/s(matnr) through custom search help.
Regards,
Abbas.

Hi Syed,
This is possible, if you set the field attributes of the screen as given below.
Program Attirbutes:
Check the checkbox for 'Output Field'
Check the checkbox for 'Output Only'
Display Attributes:
Check the checkbox 'As label on right'
Regards
Gangadhar

Need Help Billing - IF05 Variant

Hi,
The IF05 variant does not consider proration. It is used as a condition variant to check if the parameter is set. It considers only the latest value for the parameter.
Eg: For the billing period, 01/01/2009 - 01/30/2009, if the flag is set for 01/01/2009 - 01/15/2009 and is reset for the rest of the billing period, then the variant will take the value as reset for the entire billing period - 01/01/2009 - 01/30/2009.
My requirement is to create the custom variant to include the proration. I am not sure if it is possible, as the changing paramenter has only two fiedls EXECUTE and ELSE.
Also, the value set for this table, is used only to identify if to execute the IF block or the ELSE block.
My requirement is to consider the flag as set for 01/01/2009 - 01/15/2009 (execute IF block) and for the remaining period as reset. (for the above eg). So, based on the time slice, the IF and the ELSE block should get executed.
I am not sure, as we cannot have both IF and the ELSE block executed within the billing period. So, is there any way we can achieve the proration.
Or is there any way we can achive the DO ENDDO sort of logic.
Please share your views on the same!!
Regards,
Rajesh Popat

Hi,
Variants.JPG:
- delete the entry "JDK1.6 (ALL)"
- set the following for the "default (ALL)": com.sap.jdk.home_path_key --> JDK1.6.0_HOME
- resave the track.
Best Regards,
Ervin

Custom Search help in Record Working Time

Hi,
We have a requirement to add a custom field on RECORD Working Time ( ESS). This field has been added and custom search help is assigned to the data element of the field. The values in the F4 help should vary based on employees department.
The related code for this requirement is written in the serach help exit. The F4 help is working as expected from backend ( ECC) but not in Portal (ESS).
I have added the custom field in TCATS_SHLP_ITS. After maintaining this table all the values in F4 help are displaying , whereas it should only display the values under employees department in Record Working time.
I understand the class cl_xss_cat_value_help_general is responsible for the search help in ESS is there any user exit or enhancement available for this class in order to control the serach values on ESS.
Thanks in advance.
regards,
Pradeep

note that search help of CAT2 and record working time are different!
these are teh steps
please modify the following in the table TCATS_SHLP_ITS as follows:
1. Execute the T-Code SM31
2. Enter the table name TCATS_SHLP_ITS.
or check the class
CL_XSS_CAT_VALUE_HELP_GENERAL
or check
CL_XSS_CAT_VALUE_HELP*
take an example from Sap note 914125

Default multiple values in custom search help

Hi All,
I created a custom search help for the vendor. The fields in the search help are LIFNR (Vendor) and KTOKK (Account Group).
I would like to be able to set three default values for the account group. That is, when the user clicks on the dropdown to display the search help, I would like to have three values populated in the KTOKK field. Is this possible?
Any help would be appreciated.
Thanks!

Hi,
I am not sure abt default values, but if you are using this search help in any report than you can set hot keys in your search help and using hot keys, you can set some default filter values in you report's parameter.
you can set variant in your report where parameter is having values like :: =,<hotkey>,<sel1>,<sel2>
here <hotkey> : wht you have assingned in search help.
<sel1> : one of those default values you want to display.
<sel2> : one of those default values you want to display for the second field.
hope it helps,
Regards,
Sagar

What is the billing customer service phone number?

what is the billing customer service phone number?

Hi drums60,
Please Contact Adobe Support and they will help you.
Please Dial in : 1-800-833-6687
Or
you are also welcome to contact our support team at http://adobe.ly/yxj0t6

Custom F4 help in a BSP application working in Mozilla but not in IE

Hi,
I have created a custom F4 help in a BSP application.
It is working in Mozilla but not in IE. I tried enabling javascript as well but still it is not working.
Can someone please suggest a possible solution for this?

Hi,
See simmilar discussion in thread /thread/1883519 [original link is broken]
I think this may be helpful for you.
Thanks,
Chandra

Runtime error while trying to execute custom F4 help in OOP ALV grid.

Dear All,
I am trying to add custom search help for one of my column in ALV grid. I'm using OOP ALV, when i click for search help for that column, the system shows runtime error like below.
I am new to OOP concept and tried to follow program BCALV_EDIT_03. But not getting this error occur. Please help me.
With regards.

Hi,
In order to be able to provide a search help for a field in an ALV you must do the following things.
1) The field where F4 help need to be attached needs to be made editable.
2) Create an event handler class to handle the ONF4 event. You can refer the following code:
    CLASS lcl_alv1_handler DEFINITION.
    PUBLIC SECTION.
       "Tohandle F4 helps
       METHODS handle_f4 FOR EVENT onf4 OF cl_gui_alv_grid
               IMPORTING e_fieldname e_fieldvalue es_row_no er_event_data
                         et_bad_cells e_display.
    ENDCLASS.
   CLASS lcl_alv1_handler IMPLEMENTATION.
      METHOD handle_f4.
CASE e_fieldname.
     WHEN 'LIFNR'.               "Set F4 for courier vendor
         SELECT lifnr name1 FROM lfa1 INTO TABLE lt_lifnr.
       IF lt_lifnr IS NOT INITIAL.
         CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
           EXPORTING
             retfield           = 'LIFNR'
             window_title   = 'Vendors'
             value_org       = 'S'
           TABLES
             value_tab       = lt_lifnr
             return_tab      = lt_return
           EXCEPTIONS
             parameter_error = 1
             no_values_found = 2
             OTHERS          = 3.
         IF sy-subrc = 0.
           READ TABLE gt_final INTO wa_final_t INDEX es_row_no-row_id.
           IF sy-subrc = 0.
             READ TABLE lt_return INTO wa_return INDEX 1.
             IF sy-subrc = 0.
               CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
                 EXPORTING
                   input = wa_return-fieldval
                 IMPORTING
                   output = lv_lifnr.
               wa_final_t-lifnr = lv_lifnr.
               MODIFY gt_final FROM wa_final_t INDEX es_row_no-row_id.
             ENDIF.
           ENDIF.
         ENDIF.
       ENDIF.
      ENDCASE.
         CALL METHOD o_alv->refresh_table_display.
      ENDMETHOD.
   ENDCLASS.
    In the above method, GT_FINAL-LIFNR is being overwritten by the LIFNR you had selected       from F4 help. So we will call the refresh_table_display after it to see the result in the ALV.
3) After creating the ALV object, add the fields to which the F4 has to be added. For this you
    need to declare an internal table based on lvc_t_f4. Use the following code. Here O_ALV is    my ALV object.:
   CREATE OBJECT o_container
       EXPORTING
         container_name              = 'CUSTCON'
       EXCEPTIONS
         cntl_error                  = 1
         cntl_system_error           = 2
         create_error                = 3
         lifetime_error              = 4
         lifetime_dynpro_dynpro_link = 5
         OTHERS                      = 6.
     IF sy-subrc <> 0.
*     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
     ENDIF.
     CREATE OBJECT o_alv
       EXPORTING
         i_parent          = o_container
       EXCEPTIONS
         error_cntl_create = 1
         error_cntl_init   = 2
         error_cntl_link   = 3
         error_dp_create   = 4
         OTHERS            = 5.
     IF sy-subrc <> 0.
*     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
     ENDIF.
   CLEAR : gt_f4, wa_f4.
   wa_f4-fieldname   = 'LIFNR'.
   wa_f4-register    = 'X'.
   wa_f4-getbefore   = space.
   wa_f4-chngeafter = space.
   APPEND wa_f4 TO gt_f4.
   Here I am assigning F4 to LIFNR field in the final internal table that is displayed using ALV.
   After this register this field for F4.
    CALL METHOD o_alv->register_f4_for_fields
       EXPORTING
          it_f4 = gt_f4.
   CREATE OBJECT o_alv_handler.
   SET HANDLER : o_alv_handler->handle_f4 FOR o_alv1.
   The object o_alv_handler is created based on the event handler class.
I hope that this will solve your issue. Revert if this is solved.
Rgards,
Abijith

Custom search help with F4IF_INT_TABLE_VALUE_REQUEST to retrieve 2 columns

Hi all,
i have a problem to retrieve selected value from a custom search help. I need to retrieve 2 columns from the selected line. eg. there are A,B,C,D column in the search help. I need to get the B and D. can anyone help? Thanks

For achieving this follow the following 4 steps:
1. While calling F4IF_INT_TABLE_VALUE_REQUEST pass the importing paramter return_tab to make the data selected by the user IN SELECTION screen. Remember that without this the user entry is avaliable only at START OF SELECTION.
2. Use this value to READ TABLE your internal table to get the value of other column.
3. Load an internal table with values you want to assign to selection screen fields.
4. Assign values to the field in selection field using Fn Module: 'DYNP_VALUES_UPDATE'.
Example:
DATA: ......,
    lit_fields     type table of dynpread,
    ls_fields      type dynpread,
    lit_ret_tab    type table of ddshretval,
    ls_ret_tab     type ddshretval.
. call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
      retfield        = 'VARI'
      dynpprog        = sy-cprog
      dynpnr          = sy-dynnr
      dynprofield     = 'P_VARI'
      value_org       = 'S'
    tables
      value_tab       = lit_abc
      return_tab      = lit_ret_tab
    exceptions
      parameter_error = 1
      no_values_found = 2
      others          = 3.
check sy-subrc eq 0.
*-----get the entered value of field vari
read table lit_ret_tab into ls_ret_tab index 1.
lv_vari = ls_ret_tab-fieldval.
check sy-subrc eq 0.
*-----get value of the other column vari_d
read table lit_abc into ls_abc with key vari = lv_vari.
lv_vari_d = ls_abc-vari_d.
*----- Append to an internal table with values you want to assin to selection screen fields.
ls_fields-fieldname = 'P_VARI'.
ls_fields-fieldvalue = lv_vari.
append ls_fields to lit_fields.
ls_fields-fieldname = 'P_VARI_D'.
ls_fields-fieldvalue = lv_vari-d.
append ls_fields to lit_fields.
*---- Assign values to the field in selection field
call function 'DYNP_VALUES_UPDATE'
    exporting
      dyname               = sy-cprog
      dynumb               = sy-dynnr
    tables
      dynpfields           = lit_fields
    exceptions
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      undefind_error       = 7
      others               = 8.

Custom search help in sap field in standard transactions.

I have a requirement that I have to add a custom search help in XREF2 of bseg table either in fb02-f-43.
For FB02.
Display document.
Select a Line Item.
Go to Additional Data tab in menubar,a pop-up will come, where we will get the Reference1 fields .
My requiremnt is to add a custom input help having 3 constant values.
For F-43.
Give account , date etc in first screen.
Go to next screen give the amount.
Go to more data will get the fields in left side-no pop-up will come.
Help needed

hi, Jkuma,
we met the similar situation with you while developing a anpplication form for HR.
our conclustions are:
1. it's not feasible to put all the data into the form, it will make the form too big and slow, so it must be a online interactive form
2. you may put a search field to let the user to input some kind of criteria and do the search on the r3 side and return the hit list on the form , but it's not so easy to develop a table control on the form using javascript to get the selected one.
3. so we built a 'selection screen' , using webdynpro for abap,
it will show up before the form, while can use ddic search help, to make the selection, then put all the selected entries into the adobe form for further processiong.
how this is helpful hint for you.
br.
jun

Custom search help in WD for ABAP

Hi
I have a Text field which does not have any input help. Now I have a custom Search help object in my R/3 store. How do i use this search help object for displaying the values for this Text field. I believe there is some standard method available for this. Kindly help me out.
Regards,
<i><b>Seema</b></i>

Context->Dictionary Search Help.

Standard Search Help in Custom Search Help

I've created a Custom Search Help for Product Hierarchy. But when search help window appears, I want to put a standard search help of Product Hierarchy on Product Hierarchy field which is located on Resctricted section. Is that possible? Let me know if there's a way...
Thank you

hello ibnu,
it is not possible i attach a standard search help mara
no such feature available .

Problem with custom search help for std SD_DEBI

Hi,
I have created a custom zcustom search help and included in std search help SD_DEBI.
In the custom serach help i have added the fields ktokd and sales area fields(sales org, Disb channel, division).
now when i goto va01 transaction and hit F4 for sold to party i was able view the KTOKD and sales area fields in the custom tab
when i select the values from f4 help and hit enter they are not getting displayed in sold to party field.
when i select only sales area fields from f4 and press enter they are getting displayed in sold to party field.
problem is with the ktokd field that i have included.
Any suggestions please let me know

Hi deepti,
I think you have missed parameter assignment from your Z append search help to standard search help.
Select the search help and click on Param Assignment button and assign the refernece parameter(KUNNR) of your
append search help to std collective search help (KUNNR).
Thanks,
Pawan

Custom Search Help for the field Equipment number

Hi,
I have enchanced sales order transaction and included a field Equipment number(EQUI-EQUNR).
Here after pressing F4(Search help) standard search help is display.
I have a requirement wherein, the standard search help should not appear and a customised search where a specific Equipment category type values should appear in the search help.
Ex. Field equipment category (EQTYP).EQUNR(Equipment Number).
Please let me know how to work for the customised search help.

Hi,
You need to create a customized search help.
[Elementary Search Help - Structure|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21ee38446011d189700000e8322d00/content.htm]
[Creating Elementary Search Helps|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21ee5f446011d189700000e8322d00/content.htm]
Then you need to attach the search help to the screen field..
[Assigning Search Helps to Screen Fields|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21ee93446011d189700000e8322d00/content.htm]
[Hierarchy of Search Help Call|http://help.sap.com/saphelp_nw04/helpdata/EN/0b/32e9b798da11d295b800a0c929b3c3/content.htm]
regards
Nitesh

Billing Custom Variant Help

Similar Messages

Maybe you are looking for