Billing Date change to past date.
Hi,
Basically, I want to change the billing dates of few Invoices generated on 4 December 2008 to 29 November 2008 due to some tax changes in business.
Is there any way we can change the billing date of an invoice to a past date?
Dear Christino,
Check with,
T. Code: VF02
Key-in your Invoice Doc. No. and "Enter"
From menu bar,
Go To --> Header --> Header
Under Tab: Accounting Data, there is one Field: Billing Date, which would be in Editable-mode.
Change the Billing Date, as required.
Best Regards,
Amit
Similar Messages
-
Posting a billing doc with a past date
Hi Friends,
I have a requirement to post a billing doc to accoutnts with a past date i.e posting date < system date .
Is that possible ?
Regards
Mahesh.Hi Mahesh,
Posting date in billing document gets copied from the actual goods issue date in the deluvery document.
Ideally your goods issue and billing should be done in the same posting period.
If you are aware of all these and still wants to change then during creation of billing doc, you can goto billing header data and input your date(billing date).
Regards
Karan -
Billing is created on past dates
Dear gurus,
*The sales order is created for 29/09/2011, for this order if i create a billing document on the past, like 02/09/2011 then the system is getting accepted creating a billing document.*
How this is possible? Even the futuristic date like 29/10/2011 are also accepted.
My question is how the system allows to create the billing for the past against the sales order.
regards
kannanHi Kannan ,
As lakshmi said , If it is order related billing, system will consider the field Billing Date from sale order. If it is delivery related, system will consider Actual GI Date from Delivery. But, If you change the Billiing date manually in billing document , Standard system will allow you to put as we can post MIRO for the past date. If you dont want to allow the users not to post the billing document for the past date of sales order , you can achieve this through any user exits which can compare sales order and billing posting date then allow for posting.
With Regards
S.Siva -
Change delivery date on sales order -- change of Billing date on item
Hi,
We are trying to change a delivery date for a sales order's item, if we do so normally the billing date on that item's billing tab will change automatically also.
Now, for a specific sales order the billing date in the billing tab is not changing.
We compared 2 sales orders .. the same statusses - no blocks - ... and with one it works (changing of the billing date) and with the other it does not work..
Please help !
thanks a lot!Hi,
Check the following.
If invoice dates are defined for the customer, the system proposes the billing date from the invoice date calendar. If no invoice dates are agreed, then the actual goods issue date is formed on the basis of delivery related billing. In order related billing, the billing date of the order forms the basis of the billing date.
If you are billing services, the system proposes the date of services rendered. You can change the date manually in the sales document.
If you are using a billing plan to bill a project, the system can propose billing dates for the billing plan on the basis of planned or actual dates in the corresponding milestone.
In a billing plan for a maintenance or rental contract, you can specify rules by which the system determines billing dates on the basis of other dates in the contract.
Regards
Nadarajah Pratheb -
Mass change of pricing date and billing date in credit memo request
Hi,
Can i change the billing date pricing date on credit memo request docs using MASS transaction?
If i enter the regular sales order number it prompts me to change the value but if i enter the credit memo request doc number,the message "No data meets the selection criteria" is displayed.I also checked with IDES ,message is the same
Is there any different way to do mass change for credit memo requests or am i missing something here.
Please Suggest
Thanks
Abhilash NayakHi,
Go to the transaction code MASS and enter the OBJECT TYPE as BUS2032 and enter
It will lead you to the next screen where you can find the Table and Field TABS
Select the SALES ORDER HEADER DATA and choose the fields data and choose the fields PRICING DATE and BILLING DATE and execute
In the subsequent screen you can see the selection screen where you can enter all the Sales documents for which you want to change
Key in all the documents and execute
Now change the date as per your requirement and check the effect
regards,
santosh -
Want to change billing date but computer says no
My billing date for phone and broadband is the 6th of the month, with payment being taken around the 20th, which has been fine up until now. However my employer has now changed my salary payment date and I'd like to change the bolling date so that the payment isn't taken until after the 1st.
Firstly, why is it seemingly impossible to email anyone to ask about this? All the "contact us" links just take you back to a phone number and I'm at work during the non-automated times so it's not easy for me to make a call.
Anyway, make a call I did, spoke to somebody in the call centre, tried explaining the situation, but they only seemed to hear the "change billing date" part and didn't seem the least bit interested in the whys and wherefores, then it was just a case of "computer says no, is there anything else I can help you with"
I can't see why this is such a big problem. It's not like I'm asking not to pay or anything, I know that the first bill after I changed dates would be higher, because it would cover an extra couple of weeks, but I don't see why it's beyond the realms of possibility to put the bill date a couple of weeks.
I managed it with my mortgage, which is considerably higher than my BT bill
A quick email to the mortgage company, had a letter back a couple of days later confirming the payment date had been changed and the first payment on the new date would be an extra £xxx to cover the difference, all sorted no problem. Why do BT make things so difficult?
Solved!
Go to Solution.Try as I might, there seemed to be absolutely no option to change "whole bill direct debit" so I can't quite see how you can do it online, the only option I could see was to set up a DD, but I've already got one.
Anyway, all sorted now, thanks to a 5 minute online chat. I'm now swtiched to a MPP, which is for give or take a few pence, exactly the same as my monthly bills have been and instead of my next payment being taken on the 20th of this month, it's now going to be taken on the 2nd of next month and every month thereafter, which is exactly what I wanted to do.
Quite what the difference between whole bill monthly and MPP, I'm not quite sure but it's sorted -
Posting date and billing date changes on release to accounting
Hello,
I wants to change invoive billing date (VBRK-FKDAT) automatically with current system date (SY-UDATE) when release to accounting invoice.
Because always, our posting date (BKPF-BUDAT) on accounting document) must equal to current system date (SY-UDATE).
Our billing type is not blocked for transfer to accounting. We are using manually release to acounting invoice.
I can't find user exit for VF02-Release to accounting document process. (for change VBRK-FKDAT and BKPF-BUDAT)
Can you help me please?
Thank you
Gulay CelikDear Gulay Celik
Go to VTFL, select your item category for the combination of your delivery type and billing type and maintain routine 11 and save.
Now try to create a billing for which PGI has done already on the previous date and post the outcome.
thanks
G. Lakshmipathi -
How to change billing date in S1 - cancellation billing document
Dear Friends,
Could you please tell How to change billing date in S1 - cancellation billing document which is even not released to accounting & in gray mode.
Is it possible?
Thanks in advance.
RanjanDear,
Thanks for asking exact problem.
1. PGI in 2008
2. F2 Billing date in 2003 ( By mistake by the user)
3. S1 Billing date in 2008
4. PGI reverse in 2008 & OBD deleted in 2008
So reduced billing qty is shown in report in 2008 because of S1 Billing date in 2008,
Billing qty is not matching with the actual PGI quantity.
So here if the cancellation billing document S1 could be changed for billing date in 2008, then you could balance it
Now my issue is how to balance it.
hope you find it it very interesting
Awaiting your response.
Ranjan -
Changing Exchange rate as per Billing date
I have got 1 requirement while creating Billing document through VL01 transaction the user change the header data Billing date as per billing date the exchange rate also will be change automatically.
Enhancement : SDVFX008
Exit Name : SAPLV60B_008.
Include : ZXVVF008.
in that the client have 2 marketing place one is india and another is US the if user change the invoice Billing date VBRK-FKDAT as per billing date US$ exchange rate will be change automatically in the field VBRP-KURST. i written code but i did not fetching data in to table in this exchange rate maintained in table TCURR and my code is.
"" Data : ukurs1 type tcurr-ukurs,
date(10 )type c.
if cvbrk-fkdat is not initial .
select singe ukurs into ukirs1 from tcurr
where gdatu = date and
tcurr = 'USD'.
loop at vbrk where vbeln = doc_number.
clear cvbrp-kursk.
cvbrp-kurst = ukurs1.
endloop
endif.""Hai,
"" Data : ukurs1 type tcurr-ukurs,
date(10 )type c.
if cvbrk-fkdat is not initial .
select singe ukurs into ukirs1 from tcurr
where gdatu = date and
tcurr = 'USD'.
loop at vbrk where vbeln = doc_number.
clear cvbrp-kursk.
cvbrp-kurst = ukurs1.
*MODIFY cvbrp.*
endloop
endif.""
Modify the internal table & check it.
Regards,
Sudhakar Rayala
Edited by: SudhakarRayala on Feb 14, 2010 1:28 PM -
Change Billing Date in Billing Document
Hi,
I want to write a program to automate Changing Billing Document.
Currently, I do it manually :
vfx3 -> select the billing doc which needs to be changed -> change billing doc (shift + f8) -> Go To -> Header -> Header -> manually change the billing date here -> save it.
Do we have a function module/ bapi for this?Go to transaction SE37 and type in, for example, BAPIBIL, then click on the drop-down. See the whole bunch of BAPIs? I guess that
BAPI_BILLINGDOC_EDIT might be the right one, don't you think? -
Is it possible to change the billing date?
In my case accounting documents have got generated. out of which excise accounting document are auto cleared and financial accounting document is not cleared.
What is the solution to change the billing date other then cancelling and recreating it?
Regards,
HirenHi
you can do this by manually posting billing document to accounts. for this go to t-code VOFA and select your billing document type then go to detail screen, their is one indicator manual posting, mark it.
Regards
Shambhu Sarkar -
Is there a way to change my billing date? Right now my bill is due five days before I get paid, which causes my bill no be paid late, which in turn I get charged a late fee.
Thanks.Hi hgrubbs67! I know that you'd rather not have your bill due date occur before you get paid. Yes, it is possible to change your bill cycle date to reflect a different time of the month. I do want to advise you that to do so may make the first bill appear to be larger than normal. Here's why:
Let's say that your bill cycle date now occurs on the 20th of each month, but you would prefer it to happen on the 10th. So If we were to make that change today (the 25th), you would get a bill that was generated on the 20th and then another bill on the 25th! So please keep that in mind when requesting this change. If you like, I can assist you with this change to provide a more personalized explanation. You need only search for DionM_VZW and request to follow (and I'll send you a Direct Message) or you can contact Customer Care at 800-922-0204.
Dion M.
VZW Support
Follow us on Twitter www.twitter.com/vzwsupport -
No change the BILLING DATE in VF01
I need to block field BILLING DATE (RV60A-FKDAT) in transaction code VF01 that the users don´t can change this field and take automatically the sistem date.
Thanks you.Dear John,
You can use below user exit,
USEREXIT_FILL_VBRK_VBRP
Module Pool:SAPLV60A
Program:RV60AFZC
Regards,
Barathi -
My billing date is currently set it to the 7th of every month and it's annoying since everything else comes out on the 1st. How can I change it? I've looked all over the My Account section and can't find anything that'll change my billing date...
Hi Samwalker22,
Thanks for the post and welcome to the forum. You may be able to change your payment day.
It will depend on what direct debit you chose to pay by. The only direct debit method that will allow you to select the day you would like payment taken out on, is the monthly payment plan, Please see this link for more details How can I pay my bill?
It is not possible to select a specific day if you pay your bill via Whole bill direct debit. The reason for this is that the full amount of your bill will be deducted from your bank account 10 days after your bill is produced. We cannot amend your billing date so have no way to change the actual day the money comes from your account.
Hope this helps
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
Change Scheduled Billing date while Bill Order creation
Hi,
I have requirement where I need to change the scheduled billing date while creating a Bill Order.
I have tried to implement a BADI : ISU_INTERVAL_CHECK for same via transaction code EL01.
There is an issue with the custom BADI created as the changing parameter of this BADI (txy_etrg) does not update the
Scheduled billing date even after modification of scheduled billing date.
Note : I have checked in debugger that changing parameter structure txy_etrg becomes an internal table outside BADI and does not contain the updated scheduled billing date.
Kindly guide how this issue can resolved.
It would be helpful if anyone can help with other BADIs or user exits which I can use to change the scheduled billing date.
Thank you in advance!Hi,
Sorry, I can't really help, but I'm genuinely puzzled, why anyone putting out such a requirement believes:
1) something like that (orders deviating from schedule) should work in the first place, and
2) anybody besides SAP's "IS-U team" itself should be in a position to implement something like this without breaking something in the system.
I may be wrong, but everything I know about IS-U tells me - the 'right' way would be to 'reschedule' billing date via portion/schedule record, prior to creation of orders.
cheers
Janis
Maybe you are looking for
-
Error while Creating form on remote Database
Hi All I m getting error while creating form on remote database thru Database link Line/Column Error 7099/21 PLS-00454: with a returning into clause, the table expression cannot be remote or a subquery 7099/9 PL/SQL: SQL Statement ignored 7749/16 PLS
-
ISP and Apple can't help me...
I'm getting frustrated with my iPod Touch. I can't connect on Internet and set up mail. I have a wireless modem and a router (Linksys WirelessG 2.4) -- the signal comes through at full strength on the Touch, but nothing shows up in the router or DNS
-
Any way to stop facebook exporter from using version names as the caption
I tried the Aperture 3 facebook export and it is using the version names as the caption. If I change the caption on facebook it then changes the version name in my aperture library when it syncs with facebook. Is there anyway to have it use the capti
-
Wired network Late2009 not working
This one has me completely stumped. I can connect the mini to my wireless network without issue. However when I plug into the wired network I recieve an out of range IP address (169.254.130.164). Equipmet: All verified 100% functional cat6 wiring. DI
-
GR reversal when lot is processed
Dear All , We have a case when after GR the lot has been processed (UD given )rejected and the material is in blocked stock . For some reasons the GR for the raw materials have now to be reversed . Please tell me the options for the same . Ram~