Billing doc creation date in order changing when cancelled

Hi All,
In Order, if 'Future Cancelled date' is given, Billing document creation date is being changed automatically to cancellation date (if cancellation date is less than billing date). Is there any way to restrict this?
Thanks,
Regards,
Rajesh.

Hi Leo,
When any invoice is cancelled it will automatically pick the original invoice date.
If you want other date on which the cancelled invoice has to be created can give the date in the billing date field, so that it wil creat cancelled invoice on date you entered when cancelling
T.code VF11.
kindly reward points if usefull.
Regards
RVK

Similar Messages

Invoice cancellation doc picking up billing doc creation date

hi,
i am cancelling an invoice document which was created and posted last month(july- mm period closed,fi still open) but the cancelled accounting document is picking up the invoice creation date rather today's date. help would be appreciated.
regards
leo

Hi Leo,
When any invoice is cancelled it will automatically pick the original invoice date.
If you want other date on which the cancelled invoice has to be created can give the date in the billing date field, so that it wil creat cancelled invoice on date you entered when cancelling
T.code VF11.
kindly reward points if usefull.
Regards
RVK

Form tab order changes when data is emailed as .xml

.xml data is in a different tab order on the pdf. form Why is the data order changing, when user uses the submit by email button?

Hello Paul,
I tried tried and tried ..But I found no solutions for it . Could you please help me a bit ??
Thanks.
Bibhu.

How do I keep the original creation date showing? The date seems to change when I edit.

I don't know if there is a setting somewhere to maintain the original creation date when a document is edited. What is happening is that when I edit a document, even if it was created months ago, the creation date is often changed (though strangely not always). I know most settings are document specific, so perhaps I have unwittingly unchecked a setting on the ones that changed. I should note that previous version are being maintained through my back up and do show up in the list when I select Revert to from the File menu. But the creation date shows the date of the most recent edit on those files.
I use a MacBook Pro and an iPad to create and edit documents and am using the most recent version on both.
Thanks, in advance.
Shel

"actual original creation date must have been changed. I don't believe there is anything to fix it"
You can change the creation date using Terminal application:
touch -t YYYYmmDDhhSS /path/to/file
IE:
touch -t 200001010101 ~/Untitled\ 2013-10-11\ at\ 8.15.04\ PM.png
This produces (from the screenshot I just took):
To change the modification date only, it would be touch -mt ....etc
As to why this is occuring, what is the creation date showing....//1969?

'creation date of the change document' in me23n or me22n

hi experts,
i want a help from you to find out where ( in which ) table the 'date' field is getting stored.if u go to me23n and give a po number and go to menu bar environment --> header changes, then we can find 'creation date of the change document', i need to capture that date when status is 9. can any one tell me where that date is stored

Hi Kiran,
You can search for table CDHDR & CDPOS for the change documents.
where CDHER-OBJECTCLAS = EINKBELEG
OBJECTID
Regards,
Anbalagan

Why does the Date Created metadata change when images are exported?How do I stop it from changing?

why does the Date Created metadata change when images are exported? How do I stop it from changing? I must have a prefernce set up wrong.

I don't know what OS you are using, or what application you are using to view the data about your exported files, but on Windows and using Windows Explorer the "Date Created" field relates only to the date that the exported file was created, i.e. if viewed immediately after export it will show the date created as being the same date. In order to view "Capture Date" in something like Explorer, you first have to ensure you have included the Metadata as Conrad outlined above, then you have to adjust the display properties of Explorer to show the "Date Taken" field. Here is an example, part of a folder I exported back on March 3rd, note the difference between that last two dates:

Stop the Billing Doc creation for error confirmation

Hello Experts,
This is regarding the Billing issue.
Our Service Process: We create the Service Process and also create the followup confirmations.
For ex: I have created one SP and also created one followup two confirmations.
The second Confirmation contained an error and it has generated Billing Document
Actually The bill should not be generated until all confirmation contain no error and only one billing document should be generated per Service Call.
Could you help to stop ,the Billing Doc creation for Error Confirmations?
Regards
Madhu

Check the following thread: KEPM valuation K/(834) No standard cost estimate could be found for mat.
Shail

Date ordered changing when certain parameters are updated.

Hello All,
I came across an Issue where DATE ORDERED is changing when certain parameters are updated, such as agreement. Any help is appreciated.
Thanks in advance.
Regards,
Veronica.

Hello Veronica,
Negotiation Phase is only for Quotes - it does not apply to Sales orders. You need to create a Defaulting Condition template similar to that called 'In Fulfilment Phase' for Sales orders.
Here are the details:
(1) Navigate to Setup >> Rules >> Search for Application='Order Management' and Entity = 'Order Header' >> Once the rules appear click on 'Defaulting Condition template' >> Under 'In Negotiation Phase' create another Validaton template named 'In Fulfillment Phase' >> Enter any Group# >>Under Validation Rules, Select Attribute as 'Transaction Phase' >> Mark it '=' 'Fulfillment' >> Save
(2) Click Tools (top menu option) >> Generate Defaulting Handler package (you can also run the conc program)
(3) Go to the Ordered Date defaulting rule and do as I had mentioned below.
Please let me know if that helped.
Dipanjan

Bugget billing plan-billing doc creation

Hi experts,
For a resential customer that is monthy charged for 50$(BBP) a billing doc. is created with different billing lines.
The tarrif contains differents components: Fixed amount, distirbution cost, transaport cost, energy cost, rental cost, etc..
I see in the billing lines that the 50$ is split between those differents components.
How SAP billing engine breaks this amount into differents small amounts corresponding to those components ?
Can anyone explain how I can debug this when creating the BBP with t-code EA61, in order to follow the creation process ?
Thank in advance,
Tierno

Hi,
Here is the Documentation on BBP amount, it may be somewhat helpful too.
The basis for amounts is extrapolation - billing simulation. Try setting breakpoint in Function Module ISU_BUDGET_BILLING_EXTRAPOLATE - it returns the simulated billing document per contract. That should give an initial breakdown of amounts, which then gets distributed over open due dates and rounded. Look into ISU_BBP_EABPS_CREATE - it turns the billing document lines into "internal BBP positions". The entry point to the whole BBP Create, Change, Display Logic is ISU_O_BUDBILPLAN_OPEN.
Have fun and good luck - the logic is much more complex and *err, how shall I put it..?* convoluted than simple sounding 1) simulate bill, 2) split the result and 3) round it
cheers,
Janis

In Billing doc Base price should not change where as in SO system allow

Hi
I have one requirenment the Base price (ZPR0) should pick automatically from condition records and system should allow to change ZPR0 in Sales Order item level , where as it should be Grey mode in billing document item level.
1. In the condition type ZPR0 i had maintainted as NO LIMITATION and in copy controls of VTFL the pricing type as" D"
so system is allowing to change the base price at both Sales order & billing doc level.
my requirement is System should allow to change the price manually in Sales order and at billing document it should be in grey mode, so that no user cannot change the price at billing level.
Regards,
Satya

Hi ,
Create transaction varient for vf01 and vf02 in SHD0 and assign it to Users.
Regards,
Suresh

Enhancement point in billing doc creation at invoice number generation

I need to find an enhancement during billing document creation.
This is my requirement.      Within function module RV_INVOICE_DOCUMENT_ADD, standard SAP determines the invoice number using Function Module NUMBER_GET_NEXT. now, there is an enhancement point available immediately after the standard SAP invoice number has been determined.
I need to find that enhancement point.
Please advice what enhancement points are available at this point.
Any advice is appreciated. Thanks in advance..

Hi
Here is a little program that when you type in the t-code it will give you all the user exits available.
<Code>
*& Report Z_FIND_USER_EXIT *&
REPORT z_find_user_exit NO STANDARD PAGE HEADING.
TABLES : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
TABLES : tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-001.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR' AND object = 'PROG' AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
    SELECT SINGLE * FROM trdir WHERE name = tstc-pgmna.
    IF trdir-subc EQ 'F'.
      SELECT SINGLE * FROM tfdir WHERE pname = tstc-pgmna.
      SELECT SINGLE * FROM enlfdir WHERE funcname = tfdir-funcname.
      SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR'
                      AND object = 'FUGR'
                      AND obj_name EQ enlfdir-area.
      MOVE : tadir-devclass TO v_devclass.
    ENDIF.
ENDIF.
SELECT * FROM tadir INTO TABLE jtab WHERE pgmid = 'R3TR'
                      AND object = 'SMOD'
                      AND devclass = v_devclass.
SELECT SINGLE * FROM tstct WHERE sprsl EQ sy-langu
    AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transactie Code - ', 20(20) p_tcode, 45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
    WRITE:/(95) sy-uline.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 sy-vline, 2 'User exit', 21 sy-vline , 22 'Omschrijving', 95 sy-vline.
    WRITE:/(95) sy-uline.
    LOOP AT jtab.
      SELECT SINGLE * FROM modsapt WHERE sprsl = sy-langu
        AND name = jtab-obj_name.
      FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
      WRITE:/1 sy-vline, 2 jtab-obj_name HOTSPOT ON, 21 sy-vline , 22 modsapt-modtext, 95 sy-vline.
    ENDLOOP.
    WRITE:/(95) sy-uline.
    DESCRIBE TABLE jtab.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'Aantal gevonden user-exits:' , sy-tfill.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'No user-exit Found'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transactie code bestaat'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
<Code>
Hope it helps.
Regards
Vic

Dates get randomly changed when importing folders into Aperture

I am in the process of migrating my iPhoto pictures over to Aperture. Because I have close to 100k pictures and short clips, I can not import my entire 500 GB library at once because I don't have enough hard drive space to support both iPhoto and Aperture libraries at the same time. I also thought it might make sense to not have one gigantic library. Also I would like to have my old photos separated by years, and I don't know if Aperture would do this if I imported the entire iPhoto library (which does only separate them by events) at once. So it appears to me that the only import method that would work (please correct me if this is wrong) would be to open the "Masters" directory of iPhoto in the Finder, and drag and drop each year's directory into the "Projects/Library" panel in Aperture. Note that I do not want any editing information preserved from iPhoto, so using the Masters seems to be the most space efficient thing. So far so good but there appear to be at least two big snags. Firstly the yellow projects folders within each blue years folder in Aperture are not in chronological but in alphabetical order and I can't find out how to fix this. Secondly (and much more problematically) the dates on many old photos have been altered in an apparent random manner during the import into Aperture! Therefore they do appear in the wrong locations in my events library, according to the altered date. There are many too many photos that have been changed to undo this manually (I estimate it would take several weeks to do this).
But how and why could this have happened in the first place?
I also noticed that even when I change the dates of the Aperture masters to the true ones (by comparing to the masters in iPhoto), they still remain in the same wrong location in my Projects/Events library, according to the date originally (and falsely) assigned by Aperture.
There surely has to be a way to import photos into Aperture without ruining their date stamp?
Thanks in advance for your help!

Hi iScientist,
If I understand you correctly I should not import iPhoto Masters directly, because they have been altered to be in some kind of internal organization scheme. What I'm confused about is that I thought the "Masters" in iPhoto were just untouched camera files?
Yes, I would also be confused. The more I think about it, the less I know why anything wrong. You stated that you don't care about any adjustments you made in Aperture, so why wouldn't be okay to "reach into" iPhoto's internal database and pull out the masters? Good question. The only thing I can come up with: Maybe that folder isn't really what you think it is.
Were you able look at the metadata in Preview after finding one of the problematic masters in the iPhoto library again? That might give a clue.
When you say "regular way", do you mean going to "Import -> iPhoto library"? The problem with this, it seems, is that my entire iPhoto library will be imported that way, however I would like to import it chunks, split in years and on different physical media
Yes, that is what I meant. There have been various topics in this forum concerning how to import parts of the iPhoto library. I cannot seem to find any relevant posts at the moment. Perhaps someone else has better luck searching...
In any case, you may be better off using *referenced masters* instead of multiple libraries. With multiple libraries, your photos will be disjointed by whatever scheme you devise (like years). So, when you're looking at 2011, and you want that Christmas photo from 2010, you will need to close Aperture and restart it with a new library.
With referenced masters, you choose to store a particular set of *masters only* (maybe all of them) in another location. You can put different sets of masters in different places. For instance, you can have one project on one external hard drive, and a different project on a different external drive. Your versions, metadata, previews, thumbnails, all stay in the library. In this way, you can at least view screen-sized versions of last Christmas even if your "2010" external hard drive is not connected.
Looking at manual for references to referenced may be good for you before you delve too deep into this.
What I meant by order being unchanged/the file being in the wrong location is that in the chronologically organized projects overview the projects that were imported with the wrong date, which I changed to the correct date in Metadata, still appear in the wrong location.
Ahh, that is a bug that users discovered a little while ago. It took me a while to re-find the thread, but you can read up on that here. I (among others hopefully) have provided feedback to Apple concerning that bug.
[http://discussions.apple.com/thread.jspa?messageID=12981789&#12981789]
I didn't think about that view because that view is not generally as useful as the list view in the Inspector pane. That view is new to Aperture 3 and in my opinion was built to make the transition for users of iPhoto easier.
nathan

BAPI for billing doc. creation with ref to outbound delivery

Hi,
I'm looking for BAPI to create pro forma invoice billing doc with red. to outbound delivery.
I have tried using BAPI_BILLINGDOC_CREATEMULTIPLE entering the outbound delivery as ref. document and all other required data. Pro forma is create but pricing is not copied since the bapi considers the delivery number as external doc.
It seems that BAPI_BILLINGDOC_CREATEMULTIPLE is designated to billing doc. with ref to sales orders
Would appreciate any suggestions,
Assaf

Hi,
In Function Module initial screen, there is no input parameter. Directly choose execute.
system will give the create billing document screen enter delivery document number and execute.
Why are using BAPI to create billing document with reference to delivery document.
you can create background job for billing through VF06.
Regards,
Chandrasekhar.S

Auto Creation of Delivery with PGI and Billing after creation of Sale Order

Dear Experts,
I am having one Req. like...After creation of sales order ..automatic Delivery and Billing should be done.
Right now i m able to create automatic Delivery but PGI is not happening for that delivery.
Is there any configuration I have to do ... or by any user exit we can get the solution.
Can u please provide me solution for this.
Regards,
Sanket.

Hello,
yes, you can create the PGI Atomatically by BATCH JOB using the program nder the VL23 transaction code.
Goto the Transaction code SM36 to create a job for the program SAPMSSY0 which is the program for the AUTO PGI
create a variant for the Delivery document types and sales organisation combinatioans and add this variant to the bath job created in SM36.
Set the time of the Job to run after every 5 minutes, so once the job exected it will pcik all the Deliveries which are pending for the PGI.
After the PGI done you can run SDBILLDL program to create the Billing for all the document which were cleared and due for Billing.
Hope it is clear for yo, please revert if you need frther clarification .
santosh

COPA : Drive Item Category from billing doc. / without sales order

Dear All ,
I need to drive item category directly from billing document ( billing without sales order - POS inbound doc. )
i tried to drive it from table VBRP but the derivation failed as table VBRP need the billing doc. number & i can't get it from COPA
POS does not create any sales order , the in coming inbound doc. create billing directly ( billing type : FP ).
Edited by: Ahmed Hassan on May 25, 2011 2:28 PM

Hi Jat
This is not the screen I am looking for .Please go to condition tab and look for Analysis .Let me know on what excess you are looking system to find your pricing .
Below are are reference for u.
Regards

Billing doc creation date in order changing when cancelled

Similar Messages

Maybe you are looking for