Billing error, billing error

Dears,
After buy the Mountain Lion SW, when reaching to billing window and fill all required bill info, there was an error occured that says " Forr assistance contact iTuns support at www.apple/support/iTunes.

So why don't you do as the error message told you.
This is a user to user forum and we can't do anything with bills here.
Allan

Similar Messages

  • Excise Invoice creation error -Billing document does not exists

    Dear Experts,
    I have created supplementary sales order, billing with refernece through sales order by VF01.
    Now I want to create Excise Invoice but system gives error Billing Document does not exists
    I have checked billing document in VBRK table & it is showing in table.
    My item categroy is L2N -and set it to C
    I have assigned Billing type under Outgoing excise invoice ->Assign billing type to delivery type still my excise invoice is not generating.
    Pl. guide me.
    Thanks
    Trupti

    Resolved my problem.
    Actually in Billing item categroy if you put SD Doc. Catg. as M you can do excise invoice even if you have not created the
    outbound delivery.
    So cycle will be Supplementary Sales Order->VF01 with ref. to SO->J1IIN -Excise invoice creation.
    Thanks to all.
    Trupti.

  • Billing Document cancellation error

    Hi Expert,
    Good morning.
    Due to the wrong posting CST figure 3% instead of 2%,
    I wanted to cancel billing document.
    When I am trying VF11 to cancel billing document, System is throwing error " Billing date should be current date always"
    can you please let me know where what changes require?
    pts will be awarded...
    Worm Regards
    Manoj

    Dear Manoj,
    Please enter current date in Billing Date i.e today's date  field in transaction VF11 then execute.
    I hope this will help you,
    Regards,
    Murali.

  • Third party billing '' Account determination error  ''

    hi,
    i got problem in third party billing, i got error '' document 90035145 saved (error in account determinatiom), even i have maintained account determination using T Code VKOA.
    V   KOFI   INT  1200   01  01  ERL   800000
    V   KOFI   INT  1200   01  01  ERS   889000
    PLEASE HELP
    thanks

    Hi,
    This error is because of not maintaining the G/L account in VKOA .
    Goto VKOA.Select the condition table Customer group/material group/account key.
    Maintain the G/L account against your customer account group and material account group and Account key as ERL.ensure that all these are maintained correctly in master data

  • TS3297 I Cannot update or purchase from itunes because of this error " We were unable to authorize your payment card for this purchase please update your billing info " this error is beacuse my brother tried to purchase some game worth 38$ which i dont ne

    I Cannot update or purchase from itunes because of this error " We were unable to authorize your payment card for this purchase please update your billing info " this error is beacuse my brother tried to purchase some game worth 38$ which i dont need it and i want to report a problem for this issue and able to get update my apps

    Welcome to the Apple Community.
    Apple's policy on sales of digital content is that all sales are final. If however you wish to appeal to Apple, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History.

  • Need help with CRM billing due list error!

    Hi Experts,
    I created a sales order which got split into 3 deliveries and upon pgi looks like 2 of the deliveries when to the incomplete billing due list with an error "Billing due list item for transaction ****** is blocked by user R3USER" . I see only delivery made it to the billing due list. Has anyone seen this error before if yes can you get me some incite on this pelase.
    Appreciate your response. Thanks in advance!
    Regards,
    Div.

    Hi Divya,
    first thing you can go to SM13 to see the reason for the update terminate. If you think the info provided there is something technical then you resort for an abapers help. Before that if you want analyse in another way why its happening take that invoice number which throws update terminate. Go to VF01 and try to do the invoice individually. Please check if it gives any error log and you may get more info.
    regards
    sadhu kishore

  • [svn:bz-4.0.0_fixes] 20451: backporting bug fix BLZ-570/ BLZ-620 Double linked list with lot of objects result in BlazeDS Error deserializing error  : StackOverflowError  We put hard limit to the max object nest level to prevent StackOverFlowError .

    Revision: 20451
    Revision: 20451
    Author:   [email protected]
    Date:     2011-02-24 08:33:31 -0800 (Thu, 24 Feb 2011)
    Log Message:
    backporting bug fix BLZ-570/BLZ-620 Double linked list with lot of objects result in BlazeDS Error deserializing error : StackOverflowError  We put hard limit to the max object nest level to prevent StackOverFlowError. the default max object nest level is 1024 and it can be configured in the endpoint/serialziation section in service-config.xml. This needs documentation.  Checkintests pass
    Ticket Links:
        http://bugs.adobe.com/jira/browse/BLZ-570
        http://bugs.adobe.com/jira/browse/BLZ-620
    Modified Paths:
        blazeds/branches/4.0.0_fixes/modules/common/src/flex/messaging/errors.properties
        blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/endpoints/AbstractEndpoint.j ava
        blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/io/SerializationContext.java
        blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/io/amf/Amf0Input.java
        blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/io/amf/Amf3Input.java
        blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/io/amf/AmfIO.java

    Dear Pallavi,
    Very useful post!
    I am looking for similar accelerators for
    Software Inventory Accelerator
    Hardware Inventory Accelerator
    Interfaces Inventory
    Customization Assessment Accelerator
    Sizing Tool
    Which helps us to come up with the relevant Bill of Matetials for every area mentioned above, and the ones which I dont know...
    Request help on such accelerators... Any clues?
    Any reply, help is highly appreciated.
    Regards
    Manish Madhav

  • Error: Automation Error while creating a new app

    Hello Experts,
    Have installed FDM on one of our servers and trying to create a new application.
    Getting the following Error:
    Error: Automation Error. The System cannot find the file specified.
    We are using Oracle OLE DB Provider.
    Kindly Advise.
    Edited by: user7313376 on Apr 16, 2009 12:23 PM

    Check the path of the application and if its installed on server,pl check whether you have access to that path.
    If not get full access.

  • When sharing iMovie11 project  with iDVD inmediately message 'the project could not be prepared for publishing because an error occurred (Error in user parameter list).  Finalize issue?

    When sharing my 60 minutes iMovie project with iDVD inmediately message 'The project could not be prepared for publishing because an error  occurred (Error in user parameter list)' appears. Could not find the user parameter list, so I've no more info about this error.
    Option File - Finalize Project gives inmediately the same errormessage.
    Also option Share - Media Browser - Large/Medium/Mobile give the same errormessage.
    Please advise, thank you!

    Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
    Please advise, alko80

  • Error 8062 when I try to copy or move files on my macbook: "This operation could not be completed because an unexpected error occurred (error code -8062)". Can even not install new software now!!

    Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
    I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
    I tried those solutions for my trash and that helped after some trying.
    However, I still have the problem with copying and moving files.
    I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
    Who can help me??
    Cannot seem to find any info on it on the support-forums or elsewhere.
    My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
    Any help would be greatly appreciated...
    Otto

    Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
    - make sure you have at least 10% of your harddisk in free space (I had only 5%).
    - do a PRAM-reset (http://support.apple.com/kb/ht1379)
    - perform a hardware test (http://support.apple.com/kb/HT1509)
    - make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
    - after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
    So far I only cleared up some space on my HD, and already the problem occurs less.
    Still, I will go through the other tips too.
    (will post progress)

  • In Google Scholar, the "Import to EndNote" now gives an error: "Download Error ... an unknown error occurred."

    In Google Scholar, the "Import to EndNote" link now generates an error
    =========
    Download Error
    <<Filepath>> could not be opened, because an unknown error occurred.
    Try saving to disk first and then opening the file.
    =========
    Screenshot here - www.imgur.com/K8kqd.jpg
    MAC OSX Version 10.7.5
    FireFox Version 17.0.1
    EndNote Version X6
    Google Chrome does not have any issues and Safari at least downloads the file to be manually opened.
    Any ideas?

    Error 1611: This error may indicate a hardware issue with your device. Follow the steps in this article. Alsoattempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611. To troubleshoot third-party security software, follow these steps.
    Above from:
    http://support.apple.com/kb/TS3694

  • The application, C:\Program Files\Adobe\Adobe Photoshop CS2\Photoshop.exe, generated an application error The error occurred on 10/01/2009 @ 11:31:59.964 The exception generated was c0000005 at address 7C81BD02 (ntdll!ExpInterlockedPopEntrySListFault)

    Hi,
    I get this error randomly when i run my VB 6.0 application which calls Photoshop CS2 actions. I went through many forums, but could not manage to get the right solution for this.
    "The application, C:\Program Files\Adobe\Adobe Photoshop CS2\Photoshop.exe, generated an application error The error occurred on 10/01/2009 @ 11:31:59.964 The exception generated was c0000005 at address 7C81BD02 (ntdll!ExpInterlockedPopEntrySListFault)
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp."
    OS: WIndows Server 2003 SP2
    Photoshop CS2
    ANy help on this will be highly appreciated.
    Thanks in advance,
    Smiley

    I see this sort of error notice in Bridge and Photoshop, preceded by the message " Photoshop (or Bridge) has encountered a problem and must close. Tell MS.
    Yes or No."
    It most frequently happens in PS when running Dfine 2.0. I have no clue what triggers the Bridge closure. It happens randomly.
    CS3, so nobody gives a tinkers dam, I suppose.
    I see this kind of message in software testing on a regular basis. Of course, when the test is under way, the software is generating a detailed log file which we package up as part of a bug report. Then at the bug scrubs, lively discussions ensue as to who has to fix what!
    I can only image what would happen if the Dfine people and the PS people had to sit through one of those!

  • Can't update, get "Photoshop 13.1.2 for Creative Cloud Done with Errors. Error Code: U44M1P6" Help!

    Have tried several times to Update Photoshop Mac CS6, always get "
    Photoshop 13.1.2 for Creative Cloud
    Done with Errors. Error Code: U44M1P6"
    What gives and how can I fix?

    In this case since it is a feature bearing update for Creative Cloud Bpolatty will need to download the update through the Adobe Application Manager/
    Bpolatty I would recommend reviewing the installation log file for the Photoshop 13.1.2 update.  You can find details on how to locate and interpret the log file at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

  • Backup error occured, Error code 3700 "hostfile_error"

    HI,
    We are trying to MaxDB database backup to tape and getting below error.
    ===================================================================================================
    ERR
    -24988,ERR_SQL: SQL error
    -104,DBM command impossible at this time
    3,Data backup failed
    Servertask Info: because Error in backup task occured
    Job 1 (Backup / Restore Medium Task) [executing] WaitingT204 Result=3700
    Error in backup task occured, Error code 3700 "hostfile_error"
    Backupmedium #1 (
    .\pipe\backup) I/O Error
    Backup error occured, Error code 3700 "hostfile_error"
    ===================================================================================================
    I went through the previous threads regarding the same error but couldn't find a solution.
    System Info is Win 2008, MaxDB version 7.7.07.14.
    Here is the complete log, please suggest what can be done.
    ===================================================================================================
    DBA Action starts:
    Timestamp: 20110831100408   Function: sda   Object: DATA
    2011-08-31 10:04:08
    Using environment variable 'TEMP' with value 'C:\Windows\TEMP' as directory for temporary files and pipes.
    Using connection to Backint for MaxDB Interface.
    2011-08-31 10:04:09
    Checking existence and configuration of Backint for MaxDB.
        Using environment variable 'BSI_ENV' with value 'G:\sapdb\data\wrk\MXP\bsi.env' as path of the configuration file of Backint
        Reading the Backint for MaxDB configuration file 'G:\sapdb\data\wrk\MXP\bsi.env'.
            Found keyword 'BACKINT' with value 'D:\sapdb\MXP\db\bin\backint.exe'.
            Found keyword 'INPUT' with value 'G:\sapdb\data\wrk\backint\sapdb.in'.
            Found keyword 'OUTPUT' with value 'G:\sapdb\data\wrk\backint\sapdb.out'.
            Found keyword 'ERROROUTPUT' with value 'G:\sapdb\data\wrk\backint\sapdb.err'.
            Found keyword 'PARAMETERFILE' with value 'G:\sapdb\data\wrk\MXP\maxdb_config.par'.
            Found keyword 'ORIGINAL_RUNDIRECTORY' with value 'G:\sapdb\MXP\sapdata'.
        Finished reading of the Backint for MaxDB configuration file.
        Using 'D:\sapdb\MXP\db\bin\backint.exe' as Backint for MaxDB program.
        Using 'G:\sapdb\data\wrk\backint\sapdb.in' as input file for Backint for MaxDB.
        Using 'G:\sapdb\data\wrk\backint\sapdb.out' as output file for Backint for MaxDB.
        Using 'G:\sapdb\data\wrk\backint\sapdb.err' as error output file for Backint for MaxDB.
        Using 'G:\sapdb\data\wrk\MXP\maxdb_config.par' as parameter file for Backint for MaxDB.
        Using '300' seconds as timeout for Backint for MaxDB in the case of success.
        Using '300' seconds as timeout for Backint for MaxDB in the case of failure.
        Using 'G:\sapdb\MXP\sapdata\dbm.knl' as backup history of a database to migrate.
        Using 'G:\sapdb\MXP\sapdata\dbm.ebf' as external backup history of a database to migrate.
        Checking availability of backups using backint's inquire function.
    Check passed successful.
    2011-08-31 10:04:09
    Checking medium.
    Check passed successfully.
    2011-08-31 10:04:09
    Preparing backup.
        Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
        Setting environment variable 'BI_REQUEST' to value 'NEW'.
        Setting environment variable 'BI_BACKUP' to value 'FULL'.
        Constructed Backint for MaxDB call 'D:\sapdb\MXP\db\bin\backint.exe -u MXP -f backup -t file -p G:\sapdb\data\wrk\MXP\maxdb_
        Created temporary file 'G:\sapdb\data\wrk\backint\sapdb.out' as output for Backint for MaxDB.
        Created temporary file 'G:\sapdb\data\wrk\backint\sapdb.err' as error output for Backint for MaxDB.
        Writing '
    .\pipe\backup #PIPE' to the input file.
    Prepare passed successfully.
    2011-08-31 10:04:09
    Starting database action for
         the backup.
        Requesting 'SAVE DATA QUICK TO '
    .\pipe\backup' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'BackupMXP'' from db-kernel.
    The database is working on the request.
    2011-08-31 10:04:09
    Waiting until database has prepared the backup.
        Asking for state of database.
        2011-08-31 10:04:09 Database is still preparing the backup.
        Waiting 1 second ...
        Done.
        Asking for state of database.
        2011-08-31 10:04:10 Database has finished preparation of the backup.
    The database has prepared the backup successfully.
    2011-08-31 10:04:10
    Starting Backint for MaxDB.
        Starting Backint for MaxDB process 'D:\sapdb\MXP\db\bin\backint.exe -u MXP -f backup -t file -p G:\sapdb\data\wrk\MXP\maxdb_
        Process was started successfully.
    Backint for MaxDB has been started successfully.
    2011-08-31 10:04:10
    Waiting for end of the backup operation.
        2011-08-31 10:04:10 The backup tool is running.
        2011-08-31 10:04:10 The database is working on the request.
        2011-08-31 10:04:15 The backup tool is running.
        2011-08-31 10:04:15 The database is working on the request.
        2011-08-31 10:04:25 The backup tool is running.
        2011-08-31 10:04:25 The database is working on the request.
        2011-08-31 10:04:40 The backup tool is running.
        2011-08-31 10:04:40 The database is working on the request.
        2011-08-31 10:05:00 The backup tool is running.
        2011-08-31 10:05:00 The database is working on the request.
        2011-08-31 10:05:13 The backup tool process has finished work with return code 2.
        2011-08-31 10:05:13 The database has finished work on the request.
        Receiving a reply from the database kernel.
        Got the following reply from db-kernel:
            SQL-Code              :-903
    The backup operation has ended.
    2011-08-31 10:05:13
    Filling reply buffer.
        Have encountered error -24920:
            The backup tool failed with 2 as sum of exit codes. The database request failed with error -903.
        Constructed the following reply:
            ERR
            -24920,ERR_BACKUPOP: backup operation was unsuccessful
            The backup tool failed with 2 as sum of exit codes. The database request failed with error -903.
    Reply buffer filled.
    2011-08-31 10:05:13
    Cleaning up.
        Copying output of Backint for MaxDB to this file.
    Begin of output of Backint for MaxDB (G:\sapdb\data\wrk\backint\sapdb.out)----
            Reading parameter file G:\sapdb\data\wrk\MXP\maxdb_config.par.
            Using staging area D:\TEMP\STAGE1 with a size of 1048576000 bytes.
            Using staging area D:\TEMP\STAGE2 with a size of 1048576000 bytes.
            Using 2 file per Backint for Oracle call.
            Using C:\Program Files\Tivoli\TSM\tdp_r3\ora64\backint.exe as Backint for Oracle.
            Using G:\sapdb\data\wrk\MXP\initMXP.utl as parameterfile of Backint for Oracle.
            Using G:\sapdb\data\wrk\MXP\BackintHistory.txt as history file.
            Using G:\sapdb\data\wrk\backint\backint1.in as input of Backint for Oracle.
            Using G:\sapdb\data\wrk\backint\backint1.out as output of Backint for Oracle.
            Using G:\sapdb\data\wrk\backint\backint1.err as error output of Backint for Oracle.
            Using a maximal delay for a Backint for Oracle call of 3600 seconds.
            Reading input file G:\sapdb\data\wrk\backint\sapdb.in.
            Backing up pipe
    .\pipe\backup.
            Found 1 entry in the input file.
            Starting the backup.
            Starting pipe2file program(s).
            Waiting for creation of temporary files.
            1 temporary file is available for backup.
            Calling Backint for Oracle at 2011-08-31 10:05:12.
            Calling 'C:\Program Files\Tivoli\TSM\tdp_r3\ora64\backint.exe -u MXP -f backup -t file -p G:\sapdb\data\wrk\MXP\initMXP.
            Backint for Oracle ended at 2011-08-31 10:05:13 with return code 2.
            Backint for Oracle output:
            Backint for Oracle output:                          Data Protection for SAP(R)
            Backint for Oracle output:
            Backint for Oracle output:              Interface between BR*Tools and Tivoli Storage Manager
            Backint for Oracle output:              - Version 6, Release 1, Modification 0.0  for Win x64 -
            Backint for Oracle output:                    Build: 358  compiled on Nov  4 2008
            Backint for Oracle output:         (c) Copyright IBM Corporation, 1996, 2008, All Rights Reserved.
            Backint for Oracle output:
            Backint for Oracle output: BKI2027I: Using TSM-API version 6.2.3.1 (compiled with 5.3.2.0).
            Backint for Oracle output: BKI2000I: Successfully connected to ProLE on port tdpr3ora64.
            Backint for Oracle output: BKI0005I: Start of program at: 08/31/11 10:05:12 .
            Backint for Oracle output: BKI1216E: There are no backup management classes available.
            Backint for Oracle output: BKI1215I: Average transmission rate was 0.000 GB/h (0.000 MB/sec).
            Backint for Oracle output: BKI1227I: Average compression factor was 1.000.
            Backint for Oracle output: BKI0020I: End of program at: 08/31/11 10:05:13 .
            Backint for Oracle output: BKI0021I: Elapsed time: 01 sec .
            Backint for Oracle output: BKI0024I: Return code is: 2.
            Backint for Oracle output:
            Backint for Oracle error output:
            Finished the backup unsuccessfully.
            #ERROR
    .\pipe\backup
    End of output of Backint for MaxDB (G:\sapdb\data\wrk\backint\sapdb.out)----
        Removed Backint for MaxDB's temporary output file 'G:\sapdb\data\wrk\backint\sapdb.out'.
        Copying error output of Backint for MaxDB to this file.
    Begin of error output of Backint for MaxDB (G:\sapdb\data\wrk\backint\sapdb.err)----
            Backint for Oracle was unsuccessful.
    End of error output of Backint for MaxDB (G:\sapdb\data\wrk\backint\sapdb.err)----
        Removed Backint for MaxDB's temporary error output file 'G:\sapdb\data\wrk\backint\sapdb.err'.
        Removed the Backint for MaxDB input file 'G:\sapdb\data\wrk\backint\sapdb.in'.
    Have finished clean up successfully.
    SAVE/RESTORE request:
    SAVE DATA CANCEL
    SAVE/RESTORE request accepted:
    OK
    SAVE/RESTORE result:
    ERR
    -24988,ERR_SQL: SQL error
    -104,DBM command impossible at this time
    3,Data backup failed
    Servertask Info: because Error in backup task occured
    Job 1 (Backup / Restore Medium Task) [executing] WaitingT204 Result=3700
    Error in backup task occured, Error code 3700 "hostfile_error"
    Backupmedium #1 (
    .\pipe\backup) I/O Error
    Backup error occured, Error code 3700 "hostfile_error"
    DBA Action ends:
    Timestamp: 20110831100513   State:    Failure
    ===================================================================================================

    Hi Markus,
    Thanks for quick response. I did checked KNLMSG file and it has XML file kind of information where as dbm.prt has some information and here it is
    =================================================================================================
    2011-08-31 10:18:30 0x00009ecc INF          1 DBMSrvCo A DBM Server client connection was established at 2011-08-31 10:18:29 (client process has process ID 24352 on computer 10.1.47.21).
    2011-08-31 10:18:30 0x00009ecc INF        283 DBMSrv   Command 'auto_extend show' is being executed.
    2011-08-31 10:18:30 0x00009ecc INF        419 DBMSrv   Command 'auto_extend' has ended with return code 0.
    2011-08-31 10:18:30 0x00009ecc INF        283 DBMSrv   Command 'auto_update_statistics show' is being executed.
    2011-08-31 10:18:31 0x00009ecc INF        419 DBMSrv   Command 'auto_update_statistics' has ended with return code 0.
    2011-08-31 10:18:41 0x00009ecc INF        283 DBMSrv   Command 'backup_save "Backup" DATA RECOVERY' is being executed.
    2011-08-31 10:18:42 0x00009ecc INF          1 DBMKnl   Sending an administrative statement to the database
                        0x00009ecc INF          8 DBMKnl   Statement:  SAVE DATA QUICK TO '
    .\pipe\backup' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'Backup'
    2011-08-31 10:19:47 0x00009ecc ERR          3 DBMKnl   Received the result of an administrative statement from the database
                        0x00009ecc ERR          9 DBMKnl   Statement:  SAVE DATA QUICK TO '
    .\pipe\backup' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'Backup'
                        0x00009ecc ERR         10 DBMKnl   Returncode: -903
                        0x00009ecc ERR          5 DBMKnl   Errortext:  Host file I/O error
    2011-08-31 10:19:47 0x00009ecc ERR     -24580 DBMSrv   ERR_COMMAND_FAILED: Command 'backup_save' has ended and failed with return code -24920.
                        0x00009ecc ERR     -24920 DBMSrv   ERR_BACKUPOP: backup operation was unsuccessful
                        0x00009ecc ERR     -24778 DBMSrv   The backup tool failed with 2 as sum of exit codes. The database request failed with error -903.
    2011-08-31 10:19:53 0x00009ecc INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 24352 on computer 10.1.47.21).
    2011-08-31 10:19:53 0x00009ecc INF          1 DBMKnl   Sending an administrative statement to the database
                        0x00009ecc INF          8 DBMKnl   Statement:  SAVE DATA CANCEL
    2011-08-31 10:19:53 0x00009ecc ERR          3 DBMKnl   Received the result of an administrative statement from the database
                        0x00009ecc ERR          9 DBMKnl   Statement:  SAVE DATA CANCEL
                        0x00009ecc ERR         10 DBMKnl   Returncode: -104
                        0x00009ecc ERR          5 DBMKnl   Errortext:  DBM command impossible at this time

  • SSO Login page Error : Unexpected errors (WWC-41400)

    Hi,
    I downloaded the zip file ssosdk.zip from download section of OTN for SSO and followed the steps in the Install document. All the process went through without any error. But when i tried to access my login URL, i am getting this error :Unexpected errors (WWC-41400)
    .Even if i try to login using my ORCLADMIN username and its password i am getting the same error and remains in the same page.
    while configuring the partner application i did not encounter any error. Kindly suggest me how to proceed further.
    Vijay

    This also happened to me after I run ssodatan to change the logon_url port.
    Can anyone provide some help with this?!

  • Getting error like "Error in portal_sso_redirect: missing application registration information" while trying to run application using Oracle SSO

    Hi All,
    I am trying to implement SSO authentication for my APEX application. I have registered the application as a SSO partner application.
    I have set the authentication scheme to Oracle Application server Single Sign On.
    When i run the application i am getting the below error.
    Error in portal_sso_redirect: missing application registration information: p_partner_app_name:g_listener_token:HTML_DB:ofss220104.in.oracle.com:5050Please register this application as described in the installation guide.
    Please help me to resolve this.
    Thanks and Regards,
    Suhas

    Suhas,
    After you registered your application as a SSO partner application did you use the information from Oracle SSO (home URL, success URL, Logout URL, app_name etc) and loaded it into the APEX_SSO schema using the regapp.sql script from the ssosdk?
    Step 4 of http://www.oracle.com/technetwork/testcontent/sso-partner-app-100552.html#INSTALL
    Ricker

Maybe you are looking for

  • Full-screen (spacebar) preview quality testing

    [For background story, please read http://forums.adobe.com/thread/1056763 but be warned, it's very l-o-n-g!] In brief: some people have noted that Bridge full-screen (spacebar) previews (FSPs) don't accurately reflect the sharpness of a photograph. S

  • How to supervise Replication Process

    Hello, On Directory Server 5.2. How can i supervise the replication process ? I want to supervise automaticly the process : if it is running or not. The best way (if it's possible), without scan access log. Can you help me

  • Viewing Doc on Touch like stickies

    My wife is trying to put a stickies (or any text doc that is compatible and viewable on her touch) on her touch (32gb) so she can view the info later without needing a internet connection. Basically she is allowed a cheat sheet and would like to writ

  • High resolution photos

    How to transfer high resolution photos from my nokia n8 to iPad 2. more over will there be any difference when we view the iPad optimized one and the direct ones.

  • I used to have a "flag" in my browser that allowed me to identify IP's. It recently disappeared. Did I get it from Mozilla?

    A couple of moths ago I added an "add-on" to my browser window that allowed me to identify and locate IP addresses of sites I was visiting. I think it was called "flag"-something. Recently it has disappeared (probably during a "system restore" sessio