Billing output ale

Hello guru's
I have to configure billing output via ale to an email.
Do I need to maintain two condition records?
One for email and one for idoc, please suggest.
Thanks
Aman

Hello raghu,
My requirement is I have to create interface where in billing ouput shud hit vistex system for further processing of rebates and the client wants it through ale.
Now I have confusion whether to create two condition record for email as well as idoc?
And also create the idoc partner profile and port?
If you can please help me in this. <<text removed>>
Thanks
Aman
Edited by: Matt on Sep 30, 2011 4:01 PM

Similar Messages

Billing Output (Customer Hierarchy)

Hello Guru's
I have a requirement to setup output for billing documents via ale. Business needs this only for speciality customers which they have done via customer hierachy (c) in customer master under sales area tab.
I have below mentioned questions on the same.
1) Based on customer hierachy, do I use account group or put the output to billing documents?
2) Do I determine output type and everything first or setup the partner profile for idoc first and then follow with output procedure?
3) Which transmission medium shall I use for the billing output it will be sent via email by day end batch job, I am thinking of using tranmission 6 for edi let me know, if I am correct.
Thanks
Aman
Edited by: amansgh on Oct 10, 2011 12:48 PM

Hi
customer hierachy and node is basically for reporting and statics purposes.
if you divede customers whole salers and retailers in that again if you maintain hierachy node north customer South customers or export customers. based on this if you would have maintan the condition technic and conditin recor d.when generate the report it will give the report based on selection creteria.
for path you see SPRO SD Master Data Busineess partneer - customer -Customer hierachy define hierachy type.
I hope you have understood.
Thanks Regards
.Surya
Edited by: ramakrishna suryanarayanarao on Sep 15, 2008 3:15 PM

Emailing functionality for billing output

Hello SDN's,
As per requirement, business needs to send invoice output to customer email directly and business needs to validate the invoice before sending to customer email .Can you please suggest how do we implement this process in as per business requirement.
I have checked current functionality, as per that business is validating the invoice before sending to customer(not email).
Please suggest.
Thanks in advance
Regards,
KV

Hello Guru's
Based on the discussion, I do have similar business requirement but with little twist, as it can never be same
I need to configure billing output via ale. which they want in email format to be sent to vistex for further processing.
Secondly this output has to be for some special customers, business will run a batch by the end of the day to push this docs for further processing to vistex.
So for this solution do I control it by output routine or maintain access sequence?
And also which transmission medium should I use?
Please suggest on this.
Thanks
Aman

Need info on Billing Outputs

Hello,
I need info abt billing Outputs - The language is maintained in Bill to party (Customer master), Its maintained in Condition record, It can be changed while creating the invoice.
Now my question is, which of the above three cases has got highest priority.
Could some one provide me some info on this?
Regards,
Krishna

By default, we will maintain language in Bill-to-Party & also Condition record. But if required, it can be chaged at Invoicing level while taking output. Priority will be Bill-to-party, followed by Condition Record.
Regards,
Rajesh Banka

EDI billing outputs are capturing credit memos as well as invoices

I am a newcomer to the company I am currently with, and to this forum, and I have 6 years of experience in EDI and SAP SD.
I am working on a project to determine why our EDI billing outputs are capturing credit memos as well as invoices, and attempting to send them by EDI, causing failures in our Seeburger translator. Most customers donu2019t want credit memos by EDI. My goal is to track backwards and determine what portion of the EDI process in SAP is pulling credit memos rather than just invoices. I suspect that someone intentionally made changes in the past to put this in place, but we need to have a message type that includes invoices and credit memos, to be attached to specific partners that want this, and another more standard message type that sends only invoices.
The message control for the example partner specifies Message Type ZURH (customized by this company for some reason), Application V3 (which seems standard), and process code SD09 (which seems standard). Could someone help me to navigate to an area where I may be able to find out what parameters are used to determine what transaction types are pulled to be sent out by EDI for billing? I suspect that the issue may be in Application V3, but I am unable to find any help to view u2018Applicationsu2019, because application is such a widely used word.
How can I display/change Application V3, in order to check itu2019s contents?
Any other ideas why credit memos may be included would be appreciated, and I always appreciate having the transaction codes mentioned as well.
Thank you in advance for your assistance.
Application V3 (what specifies what transaction type this pulls?)
Message Type ZURH,
Process Code SD09.
Access Sequence used is ZSD1 Billing Documents (Access Sequence ZSD1 does not appear in transaction V/48 (?))
Transmission Medium is 6 EDI.
The program is RSNASTED, and the FORM Routine is EDI_PROCESSING.

Satish,
Thanks for the suggestions.
I checked transaction VV33 u201CDisplay Output Condition Records: Billingu201D for Output Type ZURH, Key Combination Sales Org/Payer, and I find the example customer linked to ZURH, as I would expect (5010013645     BEST BUY CANADA Vendor #41448     PY          6     1).
I donu2019t see any data about specific transaction types such as credit memos or invoices, so I may not be looking in the right place. I donu2019t find entries under any other key combination. How would I check if Output Condition records are maintained for credit memos?
In regards to the output type being assigned to the credit memo billing type (ZG2U), Iu2019m afraid I donu2019t know how to check that either.
In NACE, I see that u2018Proceduresu2019 list the CTyp (?), and procedure US0001 is the only one that includes credits and debits. I donu2019t recognize the Ctyps ZDN0 and ZCN0. The billing type is ZG2U, which I don't see in any of the Procedures:
10     1     RD00     Invoice
20     2     ZPRO     Proforma Invoice
30     1     ZCAN     Canadian Cust. Inv
40     1     ZCOM     Commercial Invoice
50     1     ZDN0     Debit Note
60     1     ZCN0     Credit Note
How would I be able tell which u2018Procedureu2019 is being used for Application V3, and how would I change that to another Procedure for testing?

Create Billing Output from VA01

Hi everyone!
I wonder is it possible to create an invoice with billing output immediately?
I usually use create sales order VA01, create billing due list VF04, create billing output VF31;
I'd prefer to be able to key on an invocie and for it to create a billing document in my spool right away without having to wait on the overnight process or manually pushing it using VF04 & VF31.
Any ideas?
Many many thanks!!!
Ciara

Hi,
For this change to appear we have to go for some seetings.They are mentioned below.
1.Goto the T.Code "NACE".
Select the application as "V3(Billing)".
Click on "Output types".
Select your output type.
Click on "Details" or Press "CtrlShiftF2".
Maintain the value as "4(Send Immediately(when saving the application))" for the field "Despatch time".
Check the value for transmission meduim.Ithink it is "1(Print output)".
Save.
2.Goto the T.Code "VV31".
Enter your output type.
Press Enter.Select your valid condition table if multiple tables exists.
Enter.
Maintain the valid values.Select that maintained entry.
Click on "Communication".
Maintain the output device as "LOCL".
And also check the box "Print Immediately".
Save.
If you create the invoice by using VF01,then the out put will be triggered automatically.
Or Goto T.Code VA02/VA01.After entering al the values,Click on "Sales document" in th emenu bar and then click on "Billing".
Even in this case also output will be triggered automatically.
If you want,then you can reprocess this output by using the T.Code "VF01",by selecting the processing mode as "2".
Regards,
Krishna.

Billing, output, invoice consolidation

Hello friends, I am looking for a document on Billing and output .invoice consolidation.....I cant understand from Standard SAP materiel....so if u have made some document for your reference please share it with me...
Please E-mail me the matereriel on [email protected]
Thanks in advance !!
Best regards,
Lata

Sent the required info to the email given..
Please do check and see if it helps..................
edit : : for some reason my email has bounced back..
here's the stuff..do please refer :
Info on billingsap help documents---- http://help.sap.com/saphelp_nw04/helpdata/en/e9/ce268db69b11d2956c00a0c93029cf/frameset.htm
For billing output refer these: Set up output condition for billing document.
Output type determination in Billing document
A good information PDF file on the Billing document consolidation: http://www.saptechsolutions.com/pdf/SDBillingDocumentConsolidationAndSplit.pdf
regards
Poorna
Edited by: Poorna Yalamanchili on Feb 20, 2008 2:57 AM

Billing output by mail changing the subject line

HI,
i am sending the billing output by email, but the subject of the email getting changed regularly. my requirement is i have to set standard subject for all billing output by mail.
Reagrds
Muthuraman.D

Go to Tcode - NACE - Choose V3 - Choose 'output types' on the application toolbar
- select output type - 'double click on mail and texts' at left hand side. See if you can add anything there and checck the mail.

Send the billing output by e-mail for the user

Hi,
Can you tell me if it's possible to send the billing output by e-mail (Medium = 5 - External send) for the user that create the billing document? the e-mail of the user is in SU01D.
Thanks in advance
Dora

Hi Dora,
What you can do is when you want to send a mail to customer after you receive the email for bill is do the following settings.
1) Create a condition record VV31 with the required Key combination where you can give the name of the Employee or end user with the email id.
2) Select the trasmission medium as 7 ( Simple Mail)
3) Once the Billing is done E-Mail will be triggered.
4) Downlaod it or forward it to your client with the additional text in the E-Mail.
Hope this helps.
Thanks and Regards
Rohit Dujari

Triggering billing output for multiple emails

Hi Experts,
We have a scenario wherein a single billing document output gets triggered for multiple emails. The requirement is to send the invoice layout copy to multiple emails where we maintain customer mail ids in customer master record.
When tried ,we found option in customer master record and maintained multiple email ids to send the billing output.The system has considered first email id from customer master record and did not consider next mail ids from CMR. Could you please suggest now how can we suffice this requirement .
Thanks in advance.
KV

Dear Kv rekha,
Check whether the following thread helps you.
http://wiki.sdn.sap.com/wiki/display/Snippets/Howtosendmailtoadistributionlistoragroup+ID
Thanks & Regards,
Hegal K Charles

IDOC Posting problem Through Billing Output Type

Dear Friends,
I have strange problem for IDOC posting through Billing Output Type.
We are using same output type for Partial / Final settlements through Billing Output type.
For Final settlements IDOC posted and generated account document is perfect, But for Partial settlement we are always getting message data is missing "No batch input data for screen SAPMF05A 0700 (Message no. 00 344)".
I tried to reprocess same IDOC in foreground then we are getting message "Posting is only possible with a zero balance; correct document"
(Message no. F5 060).
Could you please suggest me
Thanx in Advance.

solved

Billing Output fails as no Communication type from srategy

Dear Experts,
I am trying to process two billing output types on maintaining condition records ( for a debit memo type)for table 916. I can see these output types are defaulted in the debit memo output screen but they are becoming red and the processing log states that no communication type from strategy ANZ could be used.
I have used communication strategy ANZ in the condition record as I found the same maintained in the production.
These out put types are already available for the normal trade billing type and biz needs these output types in the debit memo.
The Output determination is there with Output determination procedure V10000. There requirement type attached is 60.
I need that these output types are processed successfully in the billing document in green
would you please help?
Thanks & regards
Chandra

Hi
My issue is resolved & the outputs in the debit memo got successfully processed now. The issue was I had to maintain Cover page text: TDCOVTITLE in the condition record as MSAS, BP country as carrier information. This is because the program check the ‘Carrier’ presence and check the Email address from LFA1 table ( with MSAS ) and retrieve field ADRNR and see the Email into ADR6 table.
I am closing this thread
Thanks & regards
Chandra

Billing Output Variant

Hi All,
Kindly suggest how to create a variant for the billing output type so that when we run the batch job for the billing docs that automatic printouts is done. What is the T-Code for this. What should I check and where to do the settings. Also where should I need to maintain the time in VF04 if I want the batch job to run at night.
Please suggest.
Thanks
Sumit

Go to T code: VF04
In Organizat data tab :
1) Enter Billing Type : (what ever your billing type is )
2) Sales area
In Documents to be selected tab :
3) Select documents according to your needs or you can select order related , delivery related or no docs with billing block
4) Then on top Go To - variant click on save as a variant ( Do not save without performing step 5-6-7 )
5) Give variant name and meaning you want
6) In screen assignment select all the screens
7) in line 1000 :1 selection d = current date
8) Click on Save as a variant
Now you should have successfully created billing job variant.
In your batch job-processing page add this billing job.
Vishal

Billing output with Header & Item data fields

Hello Friends,
I liked to create new access for Billing output with Sales Orgn/Bill to party(Billing Header data) & Material number (Item data).
I tried but system not recognizing the field Material number from billing item level.
Please guide me how to add Material number for item level with other fields form Header for creating new Output access.
kindly do the needful.
regards,
Nitin M.Pawar

Dear Nithin,
In the output determination for billing documents, click on maintain condition tables,
select 'Field catalog: Messages for billing documents'
new entries and enter MATNR.
However after this you will have to get the help of ABAP i suppose (for making this new field accessible for creating condition table).
Thanks & Regards,
Hegal K Charles

Billing output to IDoc & reprocess the IDoc in same sys. to post FI entry

I have a requirement to send the billing output to IDoc, read the same IDoc to post a FI entry but to another company code. Please suggest how can this be acheived, and is there any other alternative to acheive the above requirement.
Thanks in advance.

Hi Naga,
I have to select the records in JDBC based on different conditions each time. For example I have to select based on company code '1000' and Employee claasification 'E1' and date range. After I post these records in SAP again I want to select other records for some other company code '2000' and different business area and different dates. Basically I want to extract data multiple times based on different conditions.
-->
Such requirements cant be handle through select query of the sender...but you can handle this in the message mapping area.....you can fire a select query in the database to pick up records in a batch of 10K (do not keep any condition on this except for sorting). After the records come into PI you can send the message to your target based on the unique combination of "Company code+ Employee clasification + date range" handling this in the message mapping.
Another question is in the JDBC to IDOC scenario since the sender adapter is JDBC and the sender adapter polls depending on the duration of time ( say 60 secs ) in the adapter once after I extract the data based on a condition how do I control in such a way that the same data is not extracted again.
You can use the N--> C logic
The data records that you pick have a corresponding control table i assume. There should be a field STATUS where the initial status of record should be N.
After you pick the records this status should be made C so that only those records present in the database with status = N are picked up.
Mention the condition Status = N in the select query.
Thanks
Dhwani

Billing output ale

Similar Messages

Maybe you are looking for