Billing Plan Data not getting copied from Contract to SO

Hi ,
I have a Business requirement in which i ham supposed to create a Contract and then release/sales orders with reference to this contract. Whle creating the SO, the header billing plan dates are not getting copied from COntract to Sales Order.
Please guide me on how can this be done.
Regards,
Madhav

Hi,
plz check your copy controls VTAA from contract to release order ,under the contract item category there is Field-FPLA check what is the routine that is assigned.
you can either use routine-401 or 402

Similar Messages

Workforce planning data not getting copied into the CATs

Dear all,
I am doing the activity confirmation in the project by transferring the data from CATs. However in order to maintain the data in CAT2 we have to copy the data from workforce planning.
currently it is not happening. The data is not getting copied in CAT2.
regards,
sudhir

Hi,
how about with worklist, these are the options required to transfer the data from PS to worklist.
refer to the period which you have planned in CAT2?
Rgds
Sudhir reddy

Scheduling Agreement - Conditions not getting copied from Contracts

Hi All,
Requirement: Global outline agreements with scale prices will be created in SRM which will be into ECC as Contracts. Scheduling agreements will be created referecing the Contracts and the conditions with the scale prices needs to be copied into the scheduling agreement.
Issue: We could create Global outline agreements in SRM and are getting replicated into ECC as contracts successfully. Conditions and the scale prices are not getting copied into the Scheduling agreement from the Contracts.
Please guide.
With regards
Krishna

Hi,
I couldnt reach out a solution for this problem.
SRM Version: SRM 5.0
Yes. We create Scheduling agreements referencing the contracts.
With regards
Krishna

Data not getting fetched from Quotation to Contract

Hi,Myself new to TM. I have a ticket mentioning data not getting fetched from quotation to contract. How to solve it? Please help...
Message was edited by: Michael Appleby

Please add the version of the TM product and which SPs have been installed. Also more information on the quotation and contract.
What do you mean by ticket? It you mean an error message, from where are you reading the message?
Regards, Mike
SAP Customer Experience Group - CEG

Validity end date is not getting copied from inquiry to quotation.

Hi Friends,
While creating quotation the validity end date is not getting copied from inquiry to quotation.
What setting needs to be done, pl suggest.
Regards,
Hari.

Sreehari,
i dont find any logic of having Same validity date for Quotation and Inquiry....
the simple reason is explained by example: Say you have created Inquiry on 1st november and end date is 15th novembr. Customer comes to you on 14th november and asked for Quotation, and if you refer quotation on that day that means its only applicable for one day, which generally wont be the case.
There is no option for copying the validity dates from Inquiry to Quotation as per standard. If you want, create routine, place it in copy control.
Thanks,
raja

Profit Center not getting copied from WBS master data to settlement rule

Hello,
I am facing issues during settlement to G/L. From FI side we have set up some validations that the FI postings shld always carry a Profit Ctr. Now when I am doing settlement to B/S account, the profit ctr from WBS master data gets copied to settlement details and hence on FI posting (Credit line).
However when I am trying to settle to Expenxse/P&L account this is not happening. The profit Ctr is not getting copied from WBS master data to Settlement details and hence the settlement is not going thru. The profit derived is a dummy profit ctr and not the one on WBS master data.
I have posted this query on FI forum too but no satisfactory answers.
Pls let me know, what is the system behaviour....will the prof ctr on WBS master data gets copied on settlement rule details automatically ?
Sarang

Which exit do I use in OPSN? any thts or some exit in FI?
I am on ECC-6.0...
One thing to mention, the prof ctr is getting copied to settlement rules for Balance sheet account but not for P&L.This is more confusing...
Sarang

Partner roles not getting copied from customer.

Hi ,
Partner Roles not getting copied from customer to delivery Document .
we have created one delivery document from a purchase order and when trying to create billing document from that delivery document it is giving log "payer" and ' Bill to party " not maintained.
when checked in partner tab in delivery document these partner roles are not present there . so what can be the probable reason . These partner functions are maintained in customer.
thanks!!!!!!
which customizing seeting to check for this

Hello Payal,
Please go to T.code VOPA i.e. Maintain Partner Determination and select Delivery from the list and then click Partner Procedurers and select the relevant delivery type and double click you will get mandatory Partner Functions like Sold To, ship To, Bill to are ticked or not.
Reward if useful

Additional fields not getting copied from change req to change doc

Hi,
I created some addtional customer fields which I added both in change req and change doc.But the entries given to those fields are not getting copied from change req to the change doc as like standard SAP fields are getting copied.
Please let me know if someone worked on the similar issue.
Regards,
M.R

Hi,
We have done a similar requirement of adding additional fields in Quotation doc type at header and item level .
Also we have got the Reference data of the order being created to flow in to Additional Data B .
This is purely Abaper's Coding .when you add Additional Fields there is screen logic also to be coded for these screens .
to get the Reference order data logic has to be written in PBO of the screen which u have added additional fields .
the reference data will be validated with "VGBEL" field in VBAK table .If VGBEL is not initial then Query the VBAK table for this data in VGBEL into Internal table or work area and update the screen fields in additional data with these fields .
I have done the same and it is Working Wonderful .
Try this and Let me know Further. All the Best.
Thanks,
DevendraP.

Item Number not getting copied from Delivery to Invoice

Dear Experts
I am having a problem where Item Number in Delivery is 10 and in Invoice it is 11. The item number is not getting copied from Delivery to Invoice. I have checked the copy control option and copy item number is checked.
Please advise

Hi,
In VOFA Item no. increment has already been maintained as "0" but the problem is still there.
Regs

SPED inbound delivery creation, serial num not getting copied from out delv

We enabled SPED to create inbound delivery against outbound delivery
We observed Serial numbers are not getting copied from outbound delivery to inbound deliver
can some one help
Moderator message:
Locked. Reason: duplicate.
The new post: STO GR against outbound delivery/inbound delivery
Edited by: Csaba Szommer on Jan 9, 2012 4:16 PM

Hello Mohammed,
Go through these SAP Help Pages for Delivery Creation from SAP TM. It will help you to check where have you gone wrong is the setup.
Creation of ERP Deliveries from SAP TM:
ERP Logistics Integration - SAP Library
Creation of Delivery Proposals:
Creation of Delivery Proposals - ERP Logistics Integration - SAP Library
Monitoring of Delivery Creation:
Monitoring of Delivery Creation - ERP Logistics Integration - SAP Library
Kindly let me know if it works, or else give me some more detail regarding your steps you are doing and your scenario. It might be helpful to understand and then I can provide you a solution.
Thanks and best regards,
Navin

Contract data not getting copied for service ticket follow up complaint.

Hi Experts,
We are creating a complaint as a follow-up document to service ticket . But the contract data is not getting copied.
We contacted SAP and they told us that its a standard behavior .The reply is basically an SAP note
841830 - Contract data not copied to follow-up transaction
My question is is there a way to change this behavior using CRM_COPY_BADI ?
I tried to look for the method which I can implement to get the contract data in items, But I was not able get it .
Please suggest the way to get it working
Thanks in advance .
Naval

Please not that the contract determination works fine when creating a new complaint ... but when the I am trying to create a complaint from service ticket the item level contract determination is not working fine ...
We have configured that the contract should be determined at the item level only option `F`.
I checked in one of the sap document that this cant be achieved by standard .
http://help.sap.com/saphelp_crm70/helpdata/en/46/5cd7335bbd516fe10000000a114a6b/frameset.htmhttp://help.sap.com/saphelp_crm70/helpdata/en/46/5cd7335bbd516fe10000000a114a6b/frameset.htm
Is there a way we can put this code in the BADI eg; CRM_SERVICE_CONTRACT ?? Please note that there is already an implementation of CRM_SERVICE_CONTRACT which is working fine for new service document creation .

Gross weight and net weight not getting copied from Inquiry to quotation

Hai Gurus
Could anyone tell me why gross weight & net weight for the particular quantity of goods are not getting copied to quotation and order from an inquiry. All other details that I maintain in an inquiry (shipping type, receiving point etc) are getting copied to quotation.
regards
John
Edited by: Gino12 on Nov 11, 2010 12:49 PM

Dear
Did you maintain in MM02-MMR-Sales/Plant view Gross weight and Net wirght ??
System calculates the net weight based on the order quantity for the item and the net weight proposed from the material master record. If the item has more than one schedule line, the system uses the total order quantity of all schedule lines to calculate the net weight. In sales documents where schedule lines are not allowed (contracts, for example), the system calculates the net weight using the target quantity.
Regards
JH

Data not getting transffered from SRM system to BW

Hi All,
We have an issue where in the data is not getting transferred from SRM to BW. If i see in RSA 3 of SRM system, the datasource is pulling around 3000 records and in WE02, the idoc is generated and passed without any errors.
Whereas in BW the idoc is coming with code 8 and no data is getting transferred to BW.
What can be the probable reasons for this mismatch ??
Thanks
Abhi

Hi Abhi,
After an upgrade, i would go for following checks
1. Check the Data Source on CRM side and check if it is Active.
2. With Upgrade, usually DataSources become inactive and also, pls check if any required fields are hidden in the data source before you activate.
3. After unhiding required fields, i would activate the Data Source and Replicate the Data Source on BI Side.
4. Now I would delete the failed request by forcing its status to RED in RSMO and then go for the load.
Let me know if it worked.

Baseline date not getting populated from SRM invoices posted to ECC 6.0

Hi,
We are currently in ECC 6.0. The SRM system is in 4.0. We have this particular problem that the baseline date is not getting populated from the Invoices posted from the SRM. The baseline date is blank and the document is saved.
Did anyone face the same problem??? Can you please refer SAP note 541934 and expand........
Thanks
Aravind
Edited by: Aitipamula Aravind on Aug 10, 2009 5:13 AM

Hello,
Yes, you could check the attached note 541934 and regard the implementation of the field ZFBDT in the invoicing document.
Note 541934 provides a solution how to achieve the MM-customizing for payment baseline dates getting effective for invoices with SRM-origin. This note needs to be applied at your ERP-MM-side in the former plug-in-layer. As described in the note, this is a modification. It's recommended to apply in non-productive system first.
Hope the above infor.are helps for you!
Best Regards,
Gladys xing

Weights are not getting copied from quote to order

Hi All,
While creating sales order items with reference to a Quote the weights are not getting copied (zero shown in weights) even though the material in quote has weight.
Why are the weights not getting properly from quote to order .

hi
goto VTAA and select the target document
click on Magnifying glass symbol
here check whether you have selected complete Reference or not
But if you select this then the system copies the source document completely.
Procedure
If you mark the field, the system copies the source document into the target document completely. The system also copies the complete reference indicator. You cannot change the indicator in the target document.
Regards

Billing Plan Data not getting copied from Contract to SO

Similar Messages

Maybe you are looking for