Billing request appearing multiple times in document flow
Hi,
After upgrading from 4.6c to ECC6, for contracts the billing request(same document number, same items) is appearing multiple times in the document flow. Please help me in resolving this issue.
Thanks,
Ramesh
Note 1049482 is valid for the following releases:
Release Package name
500 SAPKH50018
600 SAPKH60011
602 SAPKH60201
You can check your support pack level from transaction SPAM or by clicking on:
System -> Status. From here there is a button called "component information" in the SAP System data section. This will show you the different support pack levels. If your support pack is less than SAPKH60011 (for example SAPKH60008) then the note is applicable. "
thanks
G. Lakshmipathi
Similar Messages
-
Inconsistency in document flow, same DMR appearing multiple times
experts,
While running transaction VA43 for document flow same resource related dmr appearing multiple times.
Please help why this same dmr is getting displayed multiple times.
Edited by: ronny1984 on Jun 30, 2009 2:40 PMNote 1049482 is valid for the following releases:
Release Package name
500 SAPKH50018
600 SAPKH60011
602 SAPKH60201
You can check your support pack level from transaction SPAM or by clicking on:
System -> Status. From here there is a button called "component information" in the SAP System data section. This will show you the different support pack levels. If your support pack is less than SAPKH60011 (for example SAPKH60008) then the note is applicable. "
thanks
G. Lakshmipathi -
One user appearing multiple time in Users on System report
Hi,
While checking the logging report I found one user is appearing multiple times. Is this the normal behaviour of Hyperion of Is there any setting in Hyperion to display one user only once.
Also can we control the users the from loging into systme multiple time at a time.
Thanks,
Ajaya KumarIf multiple people know the username and password they can definitely be shared. This is a violation of your licensiing and is a major reason why most SOX departments require Active Directory linking. For testing purposes I have created native IDs to be shared among people so that I know they are identical.
-
Bought over the lat year a number of book titles but lately the book titles appear multiple time in the collection. It makes the collection UN accessible if you have to scroll down pages of the same title. I have tried to remove them from the collection but that doesn't work, they keep on re-appearing after the title is deleted. Is there a solution to this?
Oh, well that was a whole other kettle of fish:
Oh the G4 I attempted to install iLife '08 before Lepoard was available. About the only thing that installed cleanly was iPhoto. I ended up reinstalling everything back to iLife '06, and then upgrading back to the current stable version of the iLife '06 version. I didn't attempt a reinstall until after I upgraded to Leopard.
When I did reinstall, I made a iLife '06 folder, copied all iLife apps into it, and upgraded. Seemed to work, except for the part where iMovie gets left behind and iDVD is only mostly functional.
When I installed on the other 2 machines, it was after installing Leopard and all upgrades. On those 2 machines, I didn't bother with the copy, I just moved everything to the iLife '06 folder I created, and did a fresh install.
I didn't have to do anything with the iPhoto Libraries, that I can recall.
I always do an upgrade, never an archive and install. I've never had a problem with this back to 10.1 or 10.2. -
Same UD code is appearing multiple times at qa32?
Hi all,
Same UD (yb02) code is appearing multiple times (around 7 times) in qa32, kindly suggest me how that can be decreased to only one
regards,
SanjanaDear same issue was raised by you recently and closed when you resolved so please check the link.
multiple ud code appearing for single purpose?
if your any requirement changes please do let us know.
Cheers
KK -
Artists appearing multiple times
In the artists list on my 5th Gen 80gb iPod, several artists appear multiple times. The thing is, they aren't just different songs which has slight variations in the spelling of the artist, whichever copy of the artist you choose, they all lead to the same songs. And no, there aren't multiple copies of the songs on my iPod and the same thing does not happen in iTunes.
I made a video to demonstrate the problem which you can view here:
http://blip.tv/file/203227
Any help would be greatly appreciatedIn the artists list on my 5th Gen 80gb iPod, several
artists appear multiple times. The thing is, they
aren't just different songs which has slight
variations in the spelling of the artist, whichever
copy of the artist you choose, they all lead to the
same songs. And no, there aren't multiple copies of
the songs on my iPod and the same thing does not
happen in iTunes.
I made a video to demonstrate the problem which you
can view here:
http://blip.tv/file/203227
Any help would be greatly appreciated
I have the same problem! Black 30 GB 5th gen iPod, OS X. I've updated all the software, restored it etc. Again, they all lead to the same song. Same problem as described above. Please help! -
All my TV shows in iCloud on my iTunes appear multiple times and with wrong art, why?
I keep all my past TV show seasons on iCloud, but I don't know why now they appear multiple times (even 10 times) and with all the "art" in Shows tab completely wrong in iTunes.
For instance, Glee in the screen attached appears 10 times: 4 of them with Futurama artwork, 5 with Glee artwork, and once with The Good Wife artwork.
If you see all the TV shows with multiple seasons (Glee, Futurama, The Good Wife) in the screenshot look all messed up and multiple times... this happens with every TV show that I have purchased more than one season... all of it is in iCloud, I keep nothing in my local HDD's.
Since I updated to iTunes 11, this happens.... anyone having troubles with this view????add your release date manually if it isn't there.
unfortunatly iTunes won't let you do it. i use a program called "TvTagger". just search google, third result from top, that's the one. you have to enter a release date like this: YYYY-mm-dd . I did it and I think it's worth the hassle. not only are your shows sorted correct, but the ugly "Unknown Release Date" line is replaced by the actual release date -
My apple I'd has been discarded for security reasons. The site asks me to give my email and they would send me the further instruction. But no Emil has arrived so far. Since January. And I did requested help multiple times. :( any ideas where can I solve
Who discarded the Apple ID? Apple? or You?
Did you answer the Security Questions? Is the backup email accurate? Have you tried contacting them? -
Invoice/billing document Number not appearing on sales order document flow
Dear all,
After saving the sales order invoice when i check in va02 sales order document flow invoice number is not generatingReally something is wrong in your configuration. When your delivery status shows Being Processed, I could see subsequent two documents, viz.Confirmation of Service and GD doc reference as complete.
Can you let me know how many line items that delivery contains? The reason for this query is normally, for stock item, we see Material Document reference and for non-stock item, we see Confirmation of service. But in your case, I could see both. From your VBFA table screen shot, I could see two different material document references.
G. Lakshmipathi -
Amount comes multiple times against document number
Hi,
I have a query in my report that where the A/c Document numbers have the multiple line items, it goes in loop..means it print the value multiple times like: -
5500004344...............4500
5500004345...............5000
5500004345...............5100
5500004345...............5200
5500004346...............5100
It is taking the 5500004345 value 5100, in the 5500004346 document number.(saw in debugging time)..
But when it have the single document number, it is showing the correct value...
please check my code:----
REPORT zak_mat_pur_rudrapur_new NO STANDARD PAGE HEADING LINE-SIZE 125 .
TABLES : mseg, ekpo, mkpf, rseg, bkpf, bseg, lfa1.
TYPE-POOLS : slis.
DATA : BEGIN OF itab OCCURS 0,
belnr LIKE bkpf-belnr,
gjahr LIKE bkpf-gjahr,
budat LIKE bkpf-budat,
awkey LIKE bkpf-awkey,
belnr1(10) TYPE c, " LIKE rseg-belnr,
gjahr1 LIKE rseg-gjahr,
ebeln LIKE rseg-ebeln,
ebelp LIKE rseg-ebelp,
wrbtr LIKE rseg-wrbtr,
menge LIKE rseg-menge,
bstme LIKE rseg-bstme,
lfbnr LIKE rseg-lfbnr,
ebeln1 LIKE ekpo-ebeln,
ebelp1 LIKE ekpo-ebelp,
txz01 LIKE ekpo-txz01,
mblnr LIKE mseg-mblnr,
lifnr LIKE mseg-lifnr,
lfbnr1 LIKE mseg-lfbnr,
rate TYPE p DECIMALS 2,
name1(40) TYPE c , " like lfa1-lifnr,
dmbtr LIKE bseg-dmbtr,
dmbtr1 LIKE bseg-dmbtr,
sum TYPE p DECIMALS 2,
sum1 TYPE p DECIMALS 2,
rate1 TYPE p DECIMALS 2,
lfpos LIKE rseg-lfpos,
END OF itab.
DATA : BEGIN OF itab2 OCCURS 0,
belnr LIKE bkpf-belnr,
gjahr LIKE bkpf-gjahr,
budat LIKE bkpf-budat,
awkey LIKE bkpf-awkey,
belnr1(10) TYPE c, " LIKE rseg-belnr,
gjahr1 LIKE rseg-gjahr,
ebeln LIKE rseg-ebeln,
ebelp LIKE rseg-ebelp,
wrbtr LIKE rseg-wrbtr,
menge LIKE rseg-menge,
bstme LIKE rseg-bstme,
lfbnr LIKE rseg-lfbnr,
ebeln1 LIKE ekpo-ebeln,
ebelp1 LIKE ekpo-ebelp,
txz01 LIKE ekpo-txz01,
mblnr LIKE mseg-mblnr,
lifnr LIKE mseg-lifnr,
lfbnr1 LIKE mseg-lfbnr,
rate TYPE p DECIMALS 2,
name1(40) TYPE c , " like lfa1-lifnr,
dmbtr LIKE bseg-dmbtr,
dmbtr1 LIKE bseg-dmbtr,
sum TYPE p DECIMALS 2,
sum1 TYPE p DECIMALS 2,
rate1 TYPE p DECIMALS 2,
lfpos LIKE rseg-lfpos,
END OF itab2.
DATA : w_container TYPE scrfname VALUE 'CL_GRID',
w_cprog TYPE lvc_s_layo,
g_repid LIKE sy-repid,
w_save TYPE c,
w_exit TYPE c,
cl_grid TYPE REF TO cl_gui_alv_grid,
cl_custom_container TYPE REF TO cl_gui_custom_container,
it_fld_catalog TYPE slis_t_fieldcat_alv,
wa_fld_catalog TYPE slis_t_fieldcat_alv WITH HEADER LINE ,
layout TYPE slis_layout_alv,
col_pos LIKE sy-cucol ,
alvfc TYPE slis_t_fieldcat_alv.
SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : belnr FOR bkpf-belnr.
*SELECT-OPTIONS : gjahr FOR bkpf-gjahr OBLIGATORY.
PARAMETERS : gjahr LIKE bkpf-gjahr OBLIGATORY.
*SELECT-OPTIONS : budat FOR bkpf-budat.
SELECTION-SCREEN : END OF BLOCK b1.
PERFORM fill_catalog1 USING:
'LIFNR' 'ITAB2' 'Vendor',
'NAME1' 'ITAB2' 'Name1',
'BELNR' 'ITAB2' 'MIRO Doc. No.' ,
'BUDAT' 'ITAB2' 'Posting Date',
'GJAHR' 'ITAB2' 'Year',
'BELNR1' 'ITAB2' 'A/c Doc. No.',
'LFBNR' 'ITAB2' 'Ref. Document(103)',
'MBLNR' 'ITAB2' 'Material Doc.(105)',
'EBELN' 'ITAB2' 'PO Number',
'EBELP' 'ITAB2' 'Line Item',
'TXZ01' 'ITAB2' 'Material Text',
'MENGE' 'ITAB2' 'Quantity',
'BSTME' 'ITAB2' 'Unit',
*'RATE' 'ITAB2' 'Rate',
'RATE1' 'ITAB2' 'RATE1',
'WRBTR' 'ITAB2' 'Amount',
'DMBTR' 'ITAB2' 'Variance A',
'DMBTR1' 'ITAB2' 'Variance B',
'SUM' 'ITAB2' 'Total Amt.',
'SUM1' 'ITAB2' 'Total Amt.1'.
SELECT belnr gjahr budat awkey INTO CORRESPONDING FIELDS OF TABLE itab FROM bkpf WHERE belnr IN belnr AND gjahr = gjahr.
IF sy-subrc <> 0.
MESSAGE 'DATA NOT FOUND.' TYPE 'I'(001).
ENDIF.
SORT itab BY belnr.
LOOP AT itab.
SPLIT itab-awkey AT space INTO: itab-belnr1 itab-gjahr1.
SELECT belnr gjahr ebeln ebelp wrbtr menge bstme lfbnr lfpos FROM rseg INTO (itab2-belnr1, itab2-gjahr1, itab2-ebeln,
itab2-ebelp, itab2-wrbtr, itab2-menge, itab2-bstme, itab2-lfbnr, itab2-lfpos) WHERE belnr = itab-belnr1 AND gjahr = itab-gjahr .
itab2-belnr = itab-belnr.
itab2-gjahr = itab-gjahr.
itab2-budat = itab-budat.
itab2-awkey = itab-awkey.
SELECT SINGLE ebeln ebelp txz01 FROM ekpo INTO (itab2-ebeln1, itab2-ebelp1, itab2-txz01) WHERE ebeln = itab2-ebeln AND ebelp = itab2-ebelp.
SELECT SINGLE mblnr lifnr FROM mseg INTO (itab2-mblnr, itab2-lifnr) WHERE lfbnr = itab2-lfbnr AND bwart EQ '105'.
SELECT SINGLE name1 FROM lfa1 INTO itab2-name1 WHERE lifnr = itab2-lifnr .
SELECT SINGLE dmbtr FROM bseg INTO itab2-dmbtr WHERE belnr = itab2-belnr AND gjahr = itab2-gjahr AND buzid = 'S' AND ebelp = itab2-ebelp.
itab2-rate = itab2-wrbtr / itab2-menge.
itab2-sum = itab2-wrbtr + itab2-dmbtr + itab2-dmbtr1.
itab2-rate1 = itab2-sum / itab2-menge.
*itab2-sum1 = itab2-wrbtr + itab2-dmbtr1.
APPEND itab2.
ENDSELECT.
ENDLOOP.
DATA : cnt TYPE i value 1.
LOOP AT itab2.
cnt = cnt + 1.
SELECT dmbtr FROM bseg INTO itab2-dmbtr1 WHERE belnr = itab2-belnr AND gjahr = itab2-gjahr AND buzid = 'T' AND mwart = 'V'.
MODIFY itab2 INDEX cnt TRANSPORTING dmbtr1.
cnt = cnt + 1.
ENDSELECT.
ENDLOOP.
layout-zebra = 'X' .
layout-colwidth_optimize(1) = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = 'ZAK_MAT_PUR_RUDRAPUR_NEW'
is_layout = layout
it_fieldcat = it_fld_catalog
i_default = 'X'
i_save = 'A'
TABLES
t_outtab = itab2
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& Form FILL_CATALOG1
text
-->P_FIELDNAME text
-->P_REF_TABLE text
-->P_SCRTEXT text
FORM fill_catalog1 USING p_fieldname TYPE any
p_ref_table TYPE any
p_scrtext TYPE any.
CLEAR : wa_fld_catalog.
wa_fld_catalog-fieldname = p_fieldname.
wa_fld_catalog-tabname = p_ref_table.
wa_fld_catalog-seltext_s = p_scrtext.
wa_fld_catalog-seltext_m = p_scrtext.
wa_fld_catalog-seltext_l = p_scrtext.
wa_fld_catalog-do_sum = 'X'.
wa_fld_catalog-outputlen = 15.
wa_fld_catalog-no_zero = 'X'.
APPEND wa_fld_catalog TO it_fld_catalog.
ENDFORM. " fill_catalog1
please help me....Thanks for reply....
But same problem is still here...
I copied ur code:----
LOOP AT itab.
CLEAR itab2. "INSERT STATEMENT
SPLIT ITAB-AWKEY AT SPACE INTO: ITAB-BELNR1 ITAB-GJAHR1. "DELETE STATEMENT
itab-belnr1 = itab-awkey+0(10). "INSERT STATEMENT
itab-gjahr1 = itab-awkey+10(4). "INSERT STATEMENT
SELECT belnr gjahr ebeln ebelp wrbtr menge bstme lfbnr lfpos
FROM rseg INTO (itab2-belnr1, itab2-gjahr1, itab2-ebeln, itab2-ebelp, itab2-wrbtr, itab2-menge, itab2-bstme, itab2-lfbnr, itab2-lfpos)
WHERE belnr = itab-belnr1
AND gjahr = itab-gjahr .
itab2-belnr = itab-belnr.
itab2-gjahr = itab-gjahr.
itab2-budat = itab-budat.
itab2-awkey = itab-awkey.
SELECT SINGLE ebeln ebelp txz01 FROM ekpo INTO (itab2-ebeln1, itab2-ebelp1, itab2-txz01)WHERE ebeln = itab2-ebeln AND ebelp = itab2-ebelp.
SELECT SINGLE mblnr lifnr FROM mseg INTO (itab2-mblnr, itab2-lifnr)WHERE lfbnr = itab2-lfbnr AND bwart EQ '105'.
SELECT SINGLE name1 FROM lfa1 INTO itab2-name1 WHERE lifnr = itab2-lifnr .
SELECT SINGLE dmbtr FROM bseg INTO itab2-dmbtr WHERE belnr = itab2-belnr AND gjahr = itab2-gjahr AND buzid = 'S' AND ebeln = itab2-ebeln AND ebelp = itab2-ebelp.
itab2-rate = itab2-wrbtr / itab2-menge.
itab2-sum = itab2-wrbtr + itab2-dmbtr + itab2-dmbtr1.
itab2-rate1 = itab2-sum / itab2-menge.
*itab2-sum1 = itab2-wrbtr + itab2-dmbtr1.
APPEND itab2.
CLEAR itab2. "INSERT STATMENT.
ENDSELECT.
ENDLOOP.
Not working....plz suggest... -
How do I stop an album appearing multiple times in album view?
Whenever I try to look at albums in album view some of them are appearing multiple of times. I have gone through everything I can think of made sure that all the sort fields are the same etc, yet they still appear more than once. Now with the update to iTunes 11, whenever I try and search an album it it is giving the me the multiple versions instead of just the one. This is really infuriating and I have no idea how to change it
Hi,
Its not possible to share an Album between multiple Catalogs. -
My Mac is appearing multiple times in Finder
Since I've upgraded to Yosemite, my Mac is now listed multiple times (8) under Shared in Finder. The main device is listed as XXXX (8). When I used Bonjour Browser, it looks like they are being shared under Apple Remote Desktop XXXX (2), XXXX (3)....XXXX (8). How do I remove all of the multiple appearances and get back to one under Device? When I click on each one, nothing appears. I don't have any remote desktop software that I'm aware of.
I'm also having this issue on my MacBook Air. Started with Yosemite public beta 4. My machine is only listed once in the finder sidebar but with a number in parenthesis next to it. The number seems to slowly increase as the day goes on. I've only gotten the "there is already a machine with that name" dialog once when manually deleting the additional characters. It's not causing any issues but it sure is annoying, I have a bit of OCD where these things are concerned. I've done a few searches on the matter and it appears this also happens on older versions of OS X but I have yet to find a definite solution, or cause.
-
Here is the error message:
[JavaScript Application]
evalInSandbox:Error: Premission denied for
<https://www.facebook.com> to create wrapper for
object of class UnnamedClass
The message pops up multiple times whenever I reload certain pages.
The problem does not happen in Safari or Chrome.
I've restarted Firefox but it does not help.
Let me know if there is anything I can do to make the error stop.
Thanks!hello flabs, this is likely caused by an outdated extension. in case you have the social fixer addon installed, please update it to the latest version that is available at http://socialfixer.com/blog/category/releasenotes/.
-
Artist is appearing multiple times.
I am having an interesting problem with iTunes 10.6.1.7
I have one artist that is appearing three times in my artist list.
I have checked all the fields, and deleted and re-entered all the information manually, but still the artist is continuing to be listed three times.
Any suggestions?I'm also having this issue on my MacBook Air. Started with Yosemite public beta 4. My machine is only listed once in the finder sidebar but with a number in parenthesis next to it. The number seems to slowly increase as the day goes on. I've only gotten the "there is already a machine with that name" dialog once when manually deleting the additional characters. It's not causing any issues but it sure is annoying, I have a bit of OCD where these things are concerned. I've done a few searches on the matter and it appears this also happens on older versions of OS X but I have yet to find a definite solution, or cause.
-
Records appear multiple times in the cube from delta DTP
Hi,
I am running into a problem in where the data records get loaded from the DSO to the cube is triple. The delta DTP is set to delta and change log. We are doing a document count and we only want to load data from current date and no history is needed from the DSO. Can anyone help me to understand how the data get loaded/behaved in the basic cube/DSO/real time cube?
Doc no. 1000000001 Key figure count 1 Request ID 70001
Doc no. 1000000001 Key figure count 2 Request ID 70002
Any idea?
Thanks.Hi Janice,
See below for some infor on Excep agg..
http://help.sap.com/saphelp_nw04/helpdata/en/d2/e0173f5ff48443e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/75/21054da1392649948e5b94e4fc4bce/content.htm
example
http://community.altiusconsulting.com/blogs/richardpaine/archive/2008/06/19/sap-infoobject-exception-aggregation-a-working-example.aspx
Regards
Rao
Maybe you are looking for
-
My external hard drive is not recognized my desktop or time machine
how can i fix this??
-
How to restrict update to a document in state release to the contribution g
How to restrict update to a document in state release to the contribution group. Hi I'm working with UCM 10g and I want to know if it is possible to restrict the update over a document that is on state release for the group of users that made the che
-
My MacBook Pro 2010 won't update from 10.6.8 to 10.9
Recently I tried updating my MacBook Pro 2010 13 inch from osx 10.6.8 to osx 10.9. On the mavericks installer my hard drive is greyed out and when I try to click on it to install mavericks it just says "you cannot install osx to this harddrive". My s
-
Photo thumbnails not shown in Mac Photos
I have started using the new Photos for Mac and have migrated my aperture photo library but have run into problems. When I go to "All Photos" in the side bar, a lot of thumbnails are missing. If I click on one of the missing thumbnails, the photo wil
-
SQL Server 2008 self-signed certificate is 1024bit or 2048bit?
When there is no user defined certificate available, SQL Server will generate a self-signed certificate when service starts, We have a tool scans and finds that in SQL 2005 the self-signed certificate is 1024bit, does someone know the default self-s