Billing Server FTP disconnects

Hello
While i am collecting calling informations from call manager to my billing sever,after a while ( nearly 15 min ) ftp disconnects ( 421 connection time out ) among this time ( 15 min ) i succesfully get data.What is the reason of ftp server disconnection ? I use Filezilla.Thanks...

Have you tried other client?
FreeFTPD?
This way you can find if it's the client or CUCM the one having the problem.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

Similar Messages

Adding a billing server

Hi, i want to add a new billing server to a CUCM 7.1 but im get
ting the following error
HTTP Status 500 - nullI am sorry
type Status report
message nullI am sorry
description The server encountered an internal error (nullI am sorry) that prevented it from fulfilling this request.
Apache Tomcat/5.5.17
I found a related post, whre AV is blocking the FTP port, but its not the case, any idea?
thanks in advance
Cesar

Ok, this is solved now, it was an ftp issue in the other side, but im facing a new problem now,
how can i send to separate folder the CDR and the CMR ?, because i can just manage CDR as far im concerned.
Thanks a lot
Cesar

CCM 5.1: How to re-send the CDR to Billing Server

Dear Sir,
When the SFTP is broken and re-connected, the CDR manager does not re-send the CDR records that generated during the connection broken time. How can I or CCM re-send these records to Billing Server again to keep the Billing Report Coorect?

What type of SFTP software is being used on the destination server?
The following is a list of Cisco tested and supported and tested FTP/SFTP servers for CDRM as billing server:
Unix/Linux:
=========
- FTP:
(1) Unix server
(2) Linux server
- SFTP:
(1) Unix server
(2) Linux server
Windows:
=========
- FTP

FTP disconnects all the time

Hi
Why does BC server connection disconnects so often? in DW and now using Espresso, BC connection will disconnect every few minutes. Really annoying.
Anything I can change in the FTP setup?
Thanks
Micha

Yes,
open the Windows Command Prompt and type ping -t yoursite.com (this should be your site url, without the www or http://)
You can open the command prompt by pressing the Windows key, then typing cmd.exe (if you're using Vista or Windows 7).
After entering ping -t fuxcan.businesscatalyst.com and pressing CTRL+C I got this:
Average ping 147ms and 0% packet loss.
Best regards,
Iulian Radu.

CSS Load Balancing with Billing Server

Hi Gilles
Could I have a CSS load balancing two servers and also have it communicate with a billing server across the network. If yes then how can I do it?
Regards,
Sushil

the CSS does not have the notion of billing server. A separate device - like the CSG - should be used if you need to collect billing info.
Gilles.

Third Party Billing Server

Hello All
We have call manager 7.0.1 and a billing server which gets calling informations and shows it in a web format.I have a problem sending informations to that server,from which part of the call manager i force to send information to my billing server ? Or is it a problem abaut my database on call manager.How can i fix that ?
Thank you very much...

You configure CUCM to send the info here:
Configuring CDR Repository Manager
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/7_0_1/admin_master/sacdrm.html
Without knowing how your 3rd party billing works no one can tell you if the problem is with the DB or not.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

DMZ - DNS Server, Mail Server, Web Server, FTP Server

Hi,
I am looking at a router to support around 20-30 people. I have a DNS Server, Mail Server, Web Server, FTP Server (all on one box (PC). I was wondering how everyones experiences with DMZ and port forwarding have been with these protocols with Airport and supporting a group of this size? Do you forsee issues? Will the new Airport handle these requirements better?
Thanks

A record for mail.mydomain.com going for ip 199.99.99.999
MX record for mail.mydomain.com with destionation as mail.mydomain.com
That doesn't quite make sense. There must be an A record for "server.mydomain.com" or you wouldn't be able to reach it at all. You want the MX record to point to that.

"server has disconnected...." and it hasn't. and i can't sign in

i have had no problems with thunderbird, however since yesterday, i am unable to receive emails, save emails, or copy them to the send folder.....i have a mac with version 10.8.5
error message "server has disconnected....."
i can't seem to find help anywhere. my settings in my account r fine, my mail server is working.....
help me help me help me
i don't want to uninstall and then reinstall, but if this will help then i will
k

ok, this is how i solved my problem
go here and follow the directions to back up your profile http://www.maclife.com/article/howtos/how_back_and_restore_mail_thunderbird_6
then, open thunderbird and delete your account, then add the account again.
now this should work.....the profile backup is just in case stuff happens
hopefully this will work for anybody with this problem.....i think the last update screw up my account settings and i could not figure out where
good luck
k

TS2446 I can't buy on hay day game he told me contact iTunes support to complete this transaction after that told me the billing server not respond try again later and the other game same but I can buy games from the AppStore ? Please help me

I can't buy on hay day game he told me contact iTunes support to complete this transaction after that told me the billing server not respond try again later and the other game same but I can buy games from the AppStore ?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Is adding a Billing Server mandatory to view call quality graphs in Prime Collaboration Assurance and Analytics 10.5

Hi,
we are in the process of demostrating Cisco Prime Collaboration 10.5 Assurance and Analytics and somehow are not able to pull Call Quality Graphs. The question is Is it mandatory to add a Billing Server to get the missing graphs.
Thanks in advance
Kunal

As per the following guide you should be able to discover and manage endpoints that are registered to Cisco TMS and Cisco VCS with both PCA Standard and Advanced.
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-5/assurance/standard/guide/Cisco_Prime_Collaboration_Assurance_Guide_Standard_10_5/bk_assurance_standard_chapter_010.html
HTH
Manish

CCM7 and CDR billing server

The cdr records show up on my billing server ever couple of minutes.I read you can tweak this to 1440 minutes. Is it possible to get a flat(1) monthly cdr record from callmanager to a billing server? Rather than getting hundreds if not thousands of files a month? I am looking for 1 record for the full month sent to my billing server. It does not appear the scheduler can handle this?
Thanks,
rw

I have the same problem. i want to push CDR records to an external server every sunday - i've configured the scheduler in the CDR management configuration but i get the data continiously transferred.
Can anyone explain howto manage this?
BR,
Christoph

How to communicate to the billing server?

Hi,
I need to know that how should i communicate to the billing server. I've created one app in which the request will come through the mobile user and i just need to check against his/her balance to the billing server through WSDL/SOAP. I'm bit confused around this. Do i need to configure something on the billing server or something else do i need to do to have a communication between billing server and my server side app.
As i'm new to this wsdl, so kindly help me out in this regard. I don't want to install any billing server on my application side. I just want to send a request to the billing server and billing server should send me the response for my generated request.
in advance thanks a lot....

the differents way are (maybe others exist ?):
-sockets
-posting messages via JMS
-files
-database

HEX 0x8BBB0011 The connection to the server was disconnected

Hi,
I am using a Network shared variable to control a Loop in FPGA in cRIO 9073. For the past 1 month the program was runing without any issue but suddenly the VI stopped thrwoing an error
"HEX 0x8BBB0011 The connection to the server was disconnected
The error or warning occureed while writing the following shared variable
\\NW-cRio\NW Library\NW_Force_cal
\\169.254.106.130\NW Library\NW_Force_cal"
A screen shot of the VI is attached, the NW_Force_cal is highlighted.
After the VI was closed and rerun the VI resumed running without issues. This kind of unpredictable behaviour is very difficult to handle, I lost real time data recording for 12 hours because of this issue.
Please suggest a solution for this issue.
Thanks
Mukunda
Solved!
Go to Solution.
Attachments:
Vi.png ‏120 KB

The error explained the issue. The network had problems that led to the server being disconnected. The way to fix this problem is to understand what is meant by "real-time." This is just another way to describe deterministic computing. That is, the program guarantees everything will happen within a predetermined period. In order for things to be deterministic, they must be controllable. The most obvious way to break determinism is to prompt the user for input. As we clearly cannot guarantee the user will reply within a certain period, we can no longer call the program deterministic. In this case, we have a more subtle break of determinism. Relying solely on a network will break the determinism. There simply isn't a way to guarantee the network won't get hit harder than usual. In this case, the network was down for a period of time long enough to throw an error.
Here's where we can look to fix things. After the error was thrown, what did the code do with it? The error wire isn't used for anything. I would expect it to throw an error and halt the program. This clearly isn't the behavior you want. So, why aren't we using the wire for some error handling? In the case of an error, you can log the data locally. When you regain the network, you can dump the log back to the host PC you typically use for your data collection. This removes the reliance on your network for the code to work. Using more robust code solves the issue with relatively easy error handling. Unfortunately, there is absolutely nothing anyone here can do to ensure your network never loses connectivity.
Jeff B.
Applications Engineer
National Instruments

HT201304 billing server not responding

i want to perchase item in game
but i cannot do it because "connection lost billing server not responding. please try again later."
how i can fix it and can be perchase
ps. im not enable restrictions!

You could try this...
Close All Open Apps... Sign Out of your Account... Perform a Reset and try again.
Reset... No Data or Settings will be lost...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Or...
pupflorist wrote:
... please try again later."

FTP disconnects on MLSD command. Suspect SPI is culprit

I am trying to run an FTP server on one of my computers behind this model/router:
Firmware Version:
40.19.22
Model Name:
MI424WR-GEN3I
Hardware Version:
I
Serial Number:
CSJI2051918460
When I connect (Filezilla client) the login is successful, it enters passive mode and then hangs (afer sending MLSD command) and disconnects due to timeout.
Elsewhere online I've found suggestions that disabling the SPI setting might fix this problem but I'm having trouble figuring out how I might do this with this router. The documentation suggests I mess around with Advanced Filters but this is getting me nowhere.
I've opened up port 21 on the port forwarding menu and because I'm getting a successful ftp login I am confident that this part is working.

davecwright wrote:
I am trying to run an FTP server on one of my computers behind this model/router:
Firmware Version:
40.19.22
Model Name:
MI424WR-GEN3I
Hardware Version:
I
Serial Number:
CSJI2051918460
When I connect (Filezilla client) the login is successful, it enters passive mode and then hangs (afer sending MLSD command) and disconnects due to timeout.
Elsewhere online I've found suggestions that disabling the SPI setting might fix this problem but I'm having trouble figuring out how I might do this with this router. The documentation suggests I mess around with Advanced Filters but this is getting me nowhere.
I've opened up port 21 on the port forwarding menu and because I'm getting a successful ftp login I am confident that this part is working.
try putting the device in the DMZ for a test run.
that should tell U if its the SPI

Billing Server FTP disconnects

Similar Messages

Maybe you are looking for