Billing system password?

Nevermind how ridiculous it is just to get a new phone if you aren't an authorized user or if you don't have your account password (even though they have your name, ID, and phone number), but now I'm trying to activate said phone and it requires my billing status password, which I used correctly to procure a replacement phone when mine broke. Now when I enter it when prompted it's incorrect, both online and when I use the automated activation service on the phone. Why would it be wrong when it was right two days ago and how do I bypass Verizon's sadistic password policy to activate my new phone? I'd REALLY prefer not to go to the store because I've dealt with them twice already in one day and they are no absolutely no use.
FYI, my original phone's charging port was broken and wouldn't charge but has now suddenly revived itself. Maybe there wasn't enough charge in the battery to turn it on at the onset of charging? But the guy at the store determined that it was not the battery or charger and therefore had to be the charge port. I really would just rather send the new phone back and keep the old one as mine has no SIM card anyway and I don't want to go to the store and have them transfer all my contacts over to the new phone, and I don't want to do it manually either. It sure would save a lot more hassle than trying to get my billing system password resolved.

Hello unicornhearts,
I'm so glad to see that your original phone is working. Thank you for sharing this discovery. I know how much of a hassle it can be to switch phones. The last thing we want is a simple security measure to be a frustrating process for you. If you haven't already activated your original device yet then please allow me to be the one to assist in getting this taken care of. May I ask what make and model device do you have? If it's a 4G device then the equipment can be activated by doing a super easy device change on My Verizon and a sim card transfer. If it is a 3G device then simply send me a private message with your full name, mobile number, and a brief summary of the issue. I can get this taken care of for you. I'm looking forward to your next reply.
Thank you...
ArnettH_VZW
VZWSupport
Follow us on Twitter @VZWSupport

Similar Messages

Cannot find Billing System Password to register for My Verizon account

I'm trying to register for a My Verizon account with my new business phone line, in hopes that I can see when my next bill will be due, or if it has already been sent, but I've not yet received it.
When I click to register for a My Verizon account, I am asked for my billing system password. I have never heard of this, though a search through these forums suggested that it might be the last four digits of my SSN. I tried inputting the last four digits of my SSN, the last four digits of my Tax ID number (as this is a business account), and even my Voicemail password. Nothing has been successful, and I am now alerted by the registration page that my account has been locked and I should contact Customer Service at 1-800-922-0204 to access my online account. Ironically, when I called this number, a voice-automated answering service asked for my billing system password again. After repeating the same entry attempts as I tried online (knowing they wouldn't work, but not having any other ideas), I was finally prompted that if I'd forgotten my billing system password, I should press 0 to speak with a representative. Pressing 0 brought forth another automated message, simply stating something along the lines of "Thank you for calling Verizon Wireless," and I was then promptly disconnected without the phone even ringing for a representative.
How do I go about finding my billing system password so that I can create a My Verizon account for this phone line?

If this is a business line (part of a business account) you may have to get the billing pw from your employer. The billing pw is normally the last 4 of the account owner's SSN, which would be your employer, or the company's EIN #. Depending on how the account is set up, you may not be able to have an account for your number, but I'm not sure on that point.

I need to re set my billing system password

Please someone from the customer service department get in touch with me.

You would get this done sooner if you contact CS via phone or go into a store.

Callmanager 6.0 and billing System with CDR

Please, I need help in this case.
The customer need to use a third party billing system for the CDR of Callmanger 6.0.
The problem that the database of the Callmanager not SQL like the previous versions.
The engineer that will install the billing system asked me for two ways to help to collect the data from CDR:
first: to know the path of the database so he can go through it and collect the data by himself using the billing system
OR
Second: the CDR sent a report with all details every 1 min. to the server of the billing system and he will deal with it.
please I tried many steps but it is failed.
So if any know how to do this??
thanks so much

Hi Walid,
I found the solution of this case.
Just you will need a program to let your PC as a server and choose SFTP, not FTP.
You have to put in the program user name and password that you will use in the callmanager.
You will choose the path in the program any where you need.
Then turn on the SFTP server (the program) and stop any firewall that will close this port (SFTP port is 22)
Now we'll come to the important step, in the callmanager ,when you 'll add the the server billing system, it asks u to add the username and password ,add the same username and password u added in the sftp server .
In the path just put "\"
like that:
Directory path: \
that's it , and press add to see ...if it accept your add this means that it will work well
good luck

How to recover my macbook pro system password

how to recover my macbook pro system password??

You don't, you set a new one
 Cheat sheet to help diagnose and fix your Mac

While creating Billing, system is very slow..performance issue

Hi,
While creating Billing, system is very slow. How can I debugg and provide the analysis where is the exact problem.
This is showing performance issue.
Waiting for kind response.
Best Regards,
Padhy
Moderator Message : Duplicate post locked.
Edited by: Vinod Kumar on May 12, 2011 10:59 AM

hi,
Chk the links
http://help.sap.com/saphelp_nw04/helpdata/en/4a/e71f39488fee0ce10000000a114084/content.htm
Re: How to create Secondary Index?
How may secondary indices I can create on the ODS?
Deletion of ODS index
Ramesh

An install request for a new helper app appeared, I entered my system password to download the app. Since then safari will not open. It just comes up with a safari quit unexpectedly report. I have tried logging on as a Guest but it does the same.

I have a MacBook Pro with OS X Yosemit. MY safari will not open, it only comes up with a safari quit unexpectedly report. A new helper app appeared requesting my system password to download the helper. Stupidly I input the password, when I log off I can see the download icon for a split second still running asking to abort or continue. How do I sort this?
cheers

Genieo Adware is installed. Removing it will help.
If you have another browser installed, use it.
If not, launch App store and get another browser for temporary use.
Remove it afterwards.
1. Use free AdwareMedic by clicking “Download ” from here
    http://www.adwaremedic.com/index.php
    Install , open, and run it by clicking “Scan for Adware” button   to remove adware.
    Once done, quit AdwareMedic by clicking AdwareMedic in the menu bar and selecting
    “Quit AdwareMedic”.
               or
    Remove the adware manually by following the “HowTo” from Apple.
    http://support.apple.com/en-us/HT203987
2. Safari > Preferences > Extensions
     Turn those off and relaunch Safari to test .
     Turn those on one by one and test.
3. Safari > Preferences > Search > Search Engine :
    Select your preferred   search engine.
4. Safari > Preferences > General > Homepage:
     Set your Homepage.

System Password and Security

We are installing AirParrot to our iMac (it mirrors our computer on our TV), but we are not getting sound. In order to install an audio driver, we are asked to type in our system password. If we do this, will we be compromising our computer security? TY

Ensure that the software came from a trusted source; drivers and anything else which contains system components will require your password to be installed.
(77073)

How to change system password in weblogic 8.1 ?

Hi,
Will you shed some lights on the steps of changing system password ? In weblogic console, I changed the password in Security->User and also in the remote start tab of admin server. When re-starting admin server, got this error : <Jun 17, 2005 1:36:59 PM PDT> <Critical> <Security> <l0065073> <doris811_admin> <main> <<WLS Kernel>> <> <BEA-090052> <Server installed as Windows NT service with incorrect password for user admin; The password may have been changed since the server was installed as a Windows NT Service. Contact the Windows NT system administrator.>. Any help is appreciated.
Jessie

I ran the installservice with the new password and received following errors when starting the service :
Program Error : beasvc.exe has generated errors and will be closed by Windows....
Microsoft Management Console : Could not start the beasvc doris_doris_admin service on local computer, Error 1067: The process terminated unexpectedly
Should I change password in weblogic console
security->user prior to re-install service with the new password ?
Any help is greatly appreciated.
Jessie

How to change system password for 12c ?

Hi,
I encountered error "ORA-65040: operation not allowed from within a pluggable database" when changing password for system.
sqlplus system/password@bpm
SQL*Plus: Release 11.2.0.2.0 Production on Mon Apr 20 17:47:35 2015
Copyright (c) 1982, 2010, Oracle. All rights reserved.
ERROR:
ORA-28001: the password has expired
Changing password for system
New password:
Retype new password:
ERROR:
ORA-65040: operation not allowed from within a pluggable database
Regards,
eg

I encountered error "ORA-65040: operation not allowed from within a pluggable database" when changing password for system.
sqlplus system/password@bpm
SQL*Plus: Release 11.2.0.2.0 Production on Mon Apr 20 17:47:35 2015
Copyright (c) 1982, 2010, Oracle. All rights reserved.
ERROR:
ORA-28001: the password has expired
Changing password for system
New password:
Retype new password:
ERROR:
ORA-65040: operation not allowed from within a pluggable database
The SYSTEM user is a COMMON user.
You need to be connected to the CDB/root to change it
See the Oracle doc for how to connect to the root
https://docs.oracle.com/database/121/NTDBI/startrdb.htm#CHDIIIDB
8.5 Accessing Oracle Database with SQL*Plus
To issue SQL and PL/SQL statements to Oracle Database, you can use SQL*Plus. This tool enables you to perform the same database management operations, and query, insert, update, or delete data directly in the database.
To start SQL*Plus, from the Start menu, select All Programs, then Oracle - HOMENAME, then Application Development, and then SQL Plus.
Alternatively, at the command line, you can enter the following command at a Windows command prompt:
C:\> sqlplus /nolog SQL> CONNECT user_name Enter password: password
For example, to log on as SYSTEM using the password password, you enter:
C:\> sqlplus /nolog SQL> CONNECT SYSTEM Enter password: password
Then change the password. You could also log onto the root as SYS as SYSDBA and then change the SYSTEM password.

How to reset system password

Does anyone know how to reset a system password for a Macbook?

Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart.

Changing the system password after a node is defined in the Maintenance Wiz

The system password has changed since the project started and I do not know the steps to make the change in the tool to the new password. The new password works fine in EBS command line stuff but the tool won't work because of the old password.
Any help would be great!!
Thanks in advanced for you help!!
David B

You'll have to go into the Define Nodes form, and edit the Database Node for your project.
Change the password there, and then Configure Nodes again (using the button).
Doing this will force you to re-run step 1 of the Configuration Category, which should re-propogate that change to everywhere.
-Vikki

Asking for system password

We recently bought 3 new Intel Core Duo running 10.4.8 but we have to downgrade to 10.4.7 since our POS manufacturer informs us that there are some issues with 10.4.8.
The downgrade seems okay but when we try to change the date in the Point of Sale system, it is now asking to enter the system password. I tried entering the admin password but it would not accept it or even worse, would give a date that is far way off (say 2037). I contacted our POS manufacturer and they are insisting that we just simply enter the system password that was used when the operating system was installed. Please help!!
alvic
Intel Core Duo Mac OS X (10.4.7)

You're welcome
All the best,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I cant remember my system password

I just bought a new MacBookPro and cannot remember my system password, what should I do?

Resetting User Password in Lion and Mountain Lion
Boot into your Recovery Partition by holding down the Command and R keys whilst booting.
When the Recovery screen appears, go to the Utilities menu and open Terminal.
In Terminal, type:
resetpassword
...a small app will open and allow you to choose the user for whom you want to change the password. If you are the admin, be certain that you choose your admin user. Type in your new password twice and give yourself a good hint. Click OK (or Done or whatever) and reboot, enjoying the use of your new, hopefully memorable, password.
Good luck,
Clinton

Why do we need system password always while running AD utilies..

Dear All,
I always have a doubt why we need to give system password whil using all the AD utilies..Awaiting for your knowledge sharing..

Hi;
I always have a doubt why we need to give system password whil using all the AD utilies..Awaiting for your knowledge sharing..When you run ad utulity its mention:
AD Administration needs the password for your 'SYSTEM' ORACLE schema in order to determine your installation configuration.
Enter the password for your 'SYSTEM' ORACLE schema:It doesnt clear?
Please see:
http://docs.oracle.com/cd/E18727_01/doc.121/e13676/T530334T530337.htm
Regard
Helios

Billing system password?

Similar Messages

Maybe you are looking for