Billtracker not working after restore from iCloud
i recently performed a restore from the icloud. Everything worked well except the app BillTracker. when i start it, it tells me its downloading from the icloud and never completes the download. I've even tried deleting the app and restarting it specifying i have data in the icloud. I've verified and i do see the data from the app. I've used the app for several years and would hate to loose the history i've built. Any suggestions?
I'm so happy to hear you are now up and running. Thank you for the feedback.
In my case it wasn't a Lion thing. I had two external Snow Leopard clones and one Lion clone. None would accept my password. My other Mini with identical hardware happily booted the other swapped external Lion and Snow Leopard clones.
To add to the mystery the Mini that threw the password hissy fit booted with no complaining from two external Snow Leopard clones a few months earlier when a dead internal hard drive was replaced.
I don't think the issue is common or we would see many more posts from people having correct passwords rejected when restoring from their Time Machine backups or booting from clones. I reported the password issue I had to AppleCare but I couldn't offer any insight as to what triggered the problem.
Similar Messages
-
Super drive is not working after Restoring from Time Machine
well its pretty much the Subject actually, my imac giving me BlueScreen problem so i searched and posted question and the only Solution i got was to Re-install Leopard and i did that by using Leopard DVD and Restored my imac from Time Machine backup, But i got into new problem and now the TIME after restoring from the "Time Machine" my DVD ejecting EVERY CD,DVD etc. even the Leopard DVD which he reads happily.
I dont think its a hardware fault at all, but i'm not a "Genious". Any suggestion!Issue solved with visit to Genius Bar.
As I understand it here are the steps the Genius did. Attempt to create the account (system preferences->users) with the same information. It will say it already exists. Very carefully read the options. One will say use the existing account. BE CAREFUL because one option will wipe your data.
If you need to do this it might be worth the trip to the Genius Bar as you could wipe your data. One precaution I took was to bring a full copy of that user account onto my desktop (from the backup immediately before the wipe) in addition to the one in the user folder. Once we verified that the account was working I moved the desktop copy to the trash and again verified the account (just to be safe).
Hope this helps someone else. -
Why does my purchased songs not play after restoring from iCloud?
I recently had to exchange my iPhone 4 after having a problem with my lock button. When I restored my purchased items from iCloud none of my purchased songs or movies would work. Any suggestions on how to fix this problem without having to redownload each item?
Does the music appear to be on the iPhone, but won't play?
My iPhone did this after an iCloud backup. If the music is shown but won't play then:
On the iPhone go to settings> general > usage> then delete all of the music. After you've done this sync your iPhone to your iTunes and they should all go back onto the phone and work. ( make sure that all the music is in your iTunes library first) -
IPhone 4s Voice mail notification not working after switching from Verizon to PagePlus.
iPhone 4s Voice mail notification not working after switching from Verizon to PagePlus. How can I get the notifications working?
Contact your carrier - voicemail, and visual voicemail, is a carrier feature.
-
File- Export not working after upgrade from 11i to R12
Hi,
File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
Thanks and Regards,
JagadeeshaEnabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 196613
In Argument 1 - Type: Number Value: 54
Out Argument 0 - Type: String Value: 12
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_MENU_ITEM Built-in:
In Argument 0 - Type: String Value: FILE.EXPORT
Out Argument 0 - Type: Integer Value: 19
Executing GET_MENU_ITEM_PROPERTY Built-in:
In Argument 0 - Type: Integer Value: 19
In Argument 1 - Type: Number Value: 79
Out Argument 0 - Type: String Value: TRUE
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.OUT
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.OUT
Out Argument 0 - Type: String Value: N
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing GET_APPLICATION_PROPERTY Built-in:
In Argument 0 - Type: Number Value: 75
Out Argument 0 - Type: String Value: IHR40P
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
# 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
# 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3 -
I attempted to ask this question, yesterday. However, I am not used to typing with my thumbs, yet, and messed it up some. So, I will give this another try. Auto brightness does not work after upgrade from iOS 5 to iOS 6 on my iPod touch. Is this intended by Apple, or is it a bug?
Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
iOS 6 changed how that feature works. -
Where can I find un-recovered photos after restoring from Icloud
Where can I find un-recovered photos after restoring from Icloud?
They would only be stored in your backup. If they didn't restore properly all you can do is try restoring the backup again.
-
Sql is not working after changing from MsAccess into sql server
Following Sql is not working after changing from MsAccess into sql server.
sum(trn.sales) as sales,
sum(trn.cost) as cost,
sales - cost as profit // Here is not working . can we not use sales a column. Please advise
from trn
Kind Regards
pol
polachanIt will not work if use two different column from the table or column from two different table
Example
sum(trn.sales * trn.rate) as salesAmount,
sum(trn.cost) as cost,
sum(trn.salesAmount)-sum(trn.cost) as profit ----- Here is not working . can we not use sales a column. Please advise
from trn
Regards
polachan -
Why does my ipod continue to load after restoreing from icloud
i have tryed to restore my ipod from iclound and it does not work. why is that?
Without know more see:
iCloud: Troubleshooting restoring an iCloud backup
Since a lot a GB are downloaded via wifi, restoring from iCloud backup can take a while. -
ODI Procedures not working after upgrading from 10G to 11G
Hello Gurus,
We have run into a scenario where the procedures in ODI are not working after we upgraded it from 10G to 11G (11.1.1.6). However we can make it to run if we create the procedure from scratch.
Also we are having issues related to packages where in the packages were running before we applied the patch 11.1.1.6.3. And after applying the patches they are not running.
Any help will be appreciated.
ThanksIf you want someone to help you, please be elaborate in the exact errors you are getting.
A general statement would do nothing but guess work.
What is the error that you get while executing the procedure.
What are the exact issues that you get while executing packages ? -
HT201418 After restoring from iCloud to new device - strange Apple ID popup on the phone
I have change my iPhone 6 to 6+. I have done backup of the old iPhone to iCloud. When I started restore process - iOS system gave you a question with Apple ID (is this your Apple ID?) as always with strange one. I guess system is always giving suggestion to the Apple ID account latest backup was done to the nearest server of iCLOUD. Of course I have deleted this stranger Apple ID suggestion for restore and I have applied my own APPLE ID.
Restore took some time and was successful.
ISSUE - many times iOS want to connect to iTunes - pop up window is appearing having again suggestion of the same STRANGE Apple ID. It;s annoying and I do not know how to get rid out from my iOS.
I put my normal Apple ID with credentials into iCloud and iTunes setting on iPhone but still strange one pops-upYou probably needed to update the iOS on the new phone. When it's done, set it up as a new iPhone, then disconnect it from your computer. Then go to Settings>General>Reset, tap Erase All Content and Settings (provide the password if prompted), go through the setup screens on the phone and when given the option, choose Restore from iCloud Backup and follow the prompts. Be sure your phone is connected to wifi and your charger while it is restoring the backup.
-
WiFi Not Working After Restore
The WiFi Is Not Working After I Restored My 1st Gen. iPod Touch
*PLEASE HELP!*luvlabs,
Thanks for attempting to assist in this. Unfortunately the networks around me are not even being seen by my ipod touch. I of course, to answer the dumb question you asked macpolymer, have my wifi settings turned to on. I will attempt the restore/reset again, but I have done that about 3 or 4 times now, can't recall exactly, with exactly the same result.
I need to have this resolved, otherwise I am stuck, as I have lost my receipt for Best Buy. -
HT1414 wifi will not work after restore
wifi will not work after restore
Se emy response to your other post
https://discussions.apple.com/thread/4862098?tstart=0 -
Keyboard not working after restoring windows 7 from windows 10
Last Friday (7/31/15), I upgraded Windows 10 on my Sony laptop from Windows 7 Home Premiums. My Windows 7 worked fine before the upgrade. After upgrading to Windows 10, I had experienced issues with my Outlook mails (send/receive errors) and other apps (iTunes did not run, Google Chromes did not run, etc.) that I had under Windows 7. With Windows 10, I did not see my iPad or iPhone when trying to connect to my laptop, either.
With these issues/problems, I decided to restore back to Windows 7 (8/4/15). Windows 7 was restored on my laptop, and I am able to see my familiar screen, but my keys are frozen! I tried to navigate by clicking my mouse or hitting any key on my laptop, but nothing happens. I tried to reboot my laptop with different ways below, hoping to resolve the frozen keys but still did not work.
Turn off my laptop and open in "safe mode", "safe mode with network", "safe mode with command", and "start windows normally". (tried many times)Remove the laptop battery, let it sit for 1 - 5 minutes, put back the battery, and turn on the laptop. (tried many times) Please help!!!!! I haven't been able to use my laptop since the upgrade to Windows 10 (July 31, 2015) and restore to Windows 7 (August 4, 2015).Sounds like you've done everything right. Delete the prefs again, following the instructions here: Replace Your Preferences
If that doesn't work, take another look at what else is running and turn off stuff that you don't need to see if there's a conflict, and wait to see if Bob pops in.
As a last resort, uninstall again, then run the clean script befor you reinstall: Run the CS4 Clean Script
This was a clean install of Win 7, not an inplace upgrade over Vista, right? The upgrades are known to be iffy, so if that's what you did, think about doing a clean install instead. -
Camera now not working after syncronising with Icloud and sending a photo.
Hello,
I sycronised with Icloud and my Ipod touch 4 th generation was allworking okay, until I took some photographs via emailand sent them to my friend.The camera icon is still present on the screen but when pressed the camera facility does not work. now.
Can anyone advise please.
Thanks,
PaulTry the standard fixes to rule out a software problem:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod
if still problem that indicates a hardware problem and an appointment at the genius Bar of an Apple store is in order.
Maybe you are looking for
-
Facebook no longer works correctly on my iPad. If a post has a video attached, safari automatically brings up the video. I have deleted the app facebook and re-added. Still having the issue.
-
Not able to connect as sysoper in sql*plus
Friends, Why i am not able to connect as sysoper? OS: win 2000 Oracle db: oracle 9i tool is sql*plus SQL> connect / as sysdba Connected. SQL> show user USER is "SYS" SQL> connect / as sysoper ERROR: ORA-01031: insufficient privileges Warning: You are
-
I delete iPhoto from my mac how can i reinstall it?
i cant seem to reinstall iphoto onto my mac help!
-
Please help! I have already tried to use the Combo update, which I downloaded today but it has not help. Itunes then freezes at the point of 'determining gapless playback information,' no idea what to do next, please help!!
-
Hello Experts, I want to know the sizes of some tables (e.g. TCURR). In different threads the transaction db02old and the function module 'DB_GET_TABLE_SIZE' are mentioned for that purpose. I wonder that using these methods two different sizes are Us