Billy Joel Live At Shea Stadium Blu-Ray
Does anyone know about this situation?
Hi ces-worshiper,
I apologize that my post was unhelpful yesterday,
but as I mentioned to you by private message, I was able to dig into this
further and have now found that our stores did actually post a Correction notice
regarding this matter as follows:
“Correction Notice:
On page 9 of the March 6 - March 12 ad
insert we advertised Billy Joel: Live at Shea Stadium The Concert on Blu-Ray
(SKU 2075143) for $17.99.
Due to shipping delays outside of our control some locations will not have the
Blu-Ray version with the Best Buy Exclusive content when it releases on March
8, 2011.
We apologize for any confusion or inconvenience this may have caused.“
However, since that time we were able to get shipments
overnighted to all our stores, and as of March 9th this Best Buy®
exclusive should now be available!
Thanks again,
Sarah|Community Connector | Best Buy® Corporate
Similar Messages
-
Has this been delayed. It appear to be sold out in every Best Buy store in aevery part of the country. When can we expect to see it on shelves?
Hi ces-worshiper,
I apologize that my post was unhelpful yesterday,
but as I mentioned to you by private message, I was able to dig into this
further and have now found that our stores did actually post a Correction notice
regarding this matter as follows:
“Correction Notice:
On page 9 of the March 6 - March 12 ad
insert we advertised Billy Joel: Live at Shea Stadium The Concert on Blu-Ray
(SKU 2075143) for $17.99.
Due to shipping delays outside of our control some locations will not have the
Blu-Ray version with the Best Buy Exclusive content when it releases on March
8, 2011.
We apologize for any confusion or inconvenience this may have caused.“
However, since that time we were able to get shipments
overnighted to all our stores, and as of March 9th this Best Buy®
exclusive should now be available!
Thanks again,
Sarah|Community Connector | Best Buy® Corporate -
I recently bought Vizio blue ray disc player and it has BD live capability. What type of cable do I need to access BD live on my blue ray disc and how do I connect the cable so that I can access the BD live content on my blue ray disc.
We received an Insignia blu-ray player for Christmas. I hooked it up to our Insignia widescreen HDTV and followed the onscreen prompts regarding setup (it's currently in 16:9 widescreen). However, when I play a blu-ray disc, it does not utilize the full screen--it's got vertical bars at the right and left hand sides of the screen. I did not select the "pillar-box" option and really am at a loss as to why the player doesn't utilize the full width of the screen. Any suggestions?
Thanks! -
I am trying to put together a video for my sister (who lives in the UK) of her wedding, that she can watch on her dvd/blu-ray player as a movie with scenes and menus. So, initally, I am using Encore to create menus/scenes and prior to this, used premiere pro to edit sequences and chop up/edit the video. I realise that while i am in premiere pro, I can queue it up and have the option to change the format of my files to AVI, MPEG, H.264 etc to maximise the best quality. I then take that file (or files) and bring them into encore and begin creating my scenes and menus.
Once i am happy with the final result, I then aim to burn this to a disc where i can then send it to her so that she and her newly wed hubby can invite their friends/family around to their place and remember that fabulous day together. Where i am getting stuck is when it comes to burning that file using encore as it only offers to build the project for DVD or Blu-ray. Since i dont have a blu-ray burner, it seems that my only option is to select DVD. Obviously DVD is SD and the resolution for this is 720*480. This doesnt work for me, because once i burn it to dvd, i lose almost half the quality of the original video. I have a few questions here that hopefuly someone can help me with:
1. Whats the point of encoding the timeline in premiere pro to a really high quality file such as H.264 if encore only offers DVD, Blu-ray or Flash? (I mean, why have this if you only have a dvd burner?)
2. Since i dont have a blu-ray burner, is there another way around taking my high res movie and putting it onto a DVD without loss of quality?
3. Is there any other possible way (or settings to use) before burning it to a dvd that i could tweak to avaoid loss of quality?
4. Should i perhaps be using some other way, rather than trying to create an ISO file in encore that will allow me to put this file on a dvd, which will still have a scenes and menu titles? (Meaning, so that it is just not an avi file sitting on a dvd, but rather it actually looks like a movie, with scenes, music in the background etc)?
Feel free to check out the orginial movie i cut up in post production at the link belwo. i did not shoot this vidoe so i am unsure as to what video camera was being used. All i was told, is that it was a fairly modern one (2012 i think). My sister merely sent me all the video and pictures and i just edited it in premiere pro, and now want to send it back to her in a format/way that she can watch it on her television with options to jump to scenes, just like when you watch a dvd movie at home.
Here is the link - https://vimeo.com/71008272
Thanks for your help guys.No, you can't burn a DVD with HD resolution files and have DVD or similar style navigation.
The solution is to buy a bluray burner.
The workaround is to create an HD version of the files in Premiere, but for the future. In the meantime, export MPEG2-DVD from Premiere, and use those in Encore for this project. During the export from Premiere is where you downrez and lose quality. Your sister should play this back on a player that supports upscaling. -
I am English Speaking My wife is Dutch my Children speak 3 Languages. We love AppleTV BUT we can only get films (in general) in Version Originale (French Only) and this makes no sense...
We can go to the local supermarket and buy DVDs and Blu-ray Discs that allow us to watch the up-to-date movies in a range of languages so why not on this AppleTV OTT service?
It makes no sense.
Just because we live in France does not mean we want to watch Hollywood Movies in French?
So much for What you Want-When you want-Wherever you are...It really does have to do with content permissions. The studios that release the Bluray and DVD versions might not always be the rights bearer to the film, they just bear rights to distribute it on physical media. Most films are made by different companies, then released by Sony, Paramount, and other distribution channels. But in the online realm, different disributors own the rights (and Apple doesn't participate with them or is unable to in some countries). Perhaps Sony distributed films will sell in your local store or be played by a Sony owned TV station locally. But perhaps online Sony doesn't hold that distribution rights to distribute the film online, Warner Brothers or somebody else does. Therefor, they don't allow it online in that market. The licensing is in limbo.
Most American films I buy in China on DVD from Wal Mart, are distributed by a Chinese company and not the original American film studio. Also in USA, the price for a new DVD is about $20 USD, in China it is only $2 USD. So to limit everyone in USA from buying Chinese DVDs at a cheaper price to watch American movies, they put content restrictions on the media (ie. the DVD region codes) so the DVD won't play in an American player.
The same goes for online rights. Your local government, copyright offices and local content license holders do not distribute the movie you want online. They distribute it on physical media or TV broadcast. But they have not secured permission or agreed on what price to sell the movies for online in your market. Apple has no say in this. In fast, the only store Apple controls in the US store. All other local iTunes stores are really virtual stores in place for locals to buy from local distributors.
The Chinese people are in no hurry to download from the US iTunes store because it cost too much. But if the Americans could download from the Chinese iTunes store, they could buy any movie they like for less than $1 and all the money goes to China, and not the US. Hence the restriction.
So copyright holders are just fighting over prices and rights and don't want to or legally can't release it online in your local store. -
Blue screen of death when building blu-ray in Encore CS6
I recently purchased a new laptop and installed Adobe Master Collection CS6. I purchased the laptop for video capture and editing, as well as for blu-ray authoring.
Unfortunately, although the computer and software works fine for video capture and editing, I am unable to author a blu-ray. For authoring, I am using Adobe’s Encore CS6. After checking and previewing my creation, I attempt to build to disc using Encore. About 2 seconds after clicking the build disc in Encore, I get the “blue screen of death” (BSOD). This happens every time I try to build to blu-ray (only blu-ray has this issue; I am able to build to a DVD). I am using an external blu-ray drive on USB 3.0.
I am using Encore version 6.0.0.492
Here are the blu-ray drive specs:
Logitec USB 2.0/3.0 Bus powered portable bluray drive unit, LBD-PME6U3VBK
PIONEER BD-RW BDR-TD05 USB Device
Driver: 6.1.7601.17514
C:\windows\system32\DRIVERS\cdrom.sys
\windows\system32\Drivers\PXHlpa64.sys
\windows\system32\DRIVERS\tdcmdpst.sys
\windows\SysWOW64\drivers\Afc.sys
Renesas USB 3.0 driver also installed
The computer specs are as follows:
§ Manufacturer: Toshiba
§ Manufacturer Part Number: PSAY1U-05U027
§ Product Line: Satellite
§ Product Series: P755
§ Product Model: P755-S5375
§ Product Name: Satellite P755-S5375 Notebook
§ Product Type: Notebook
§ Processor Manufacturer: Intel
§ Processor Type: Core i7
§ Processor Model: i7-2670QM
§ Processor Speed: 2.20 GHz
§ Processor Core: Quad-core (4 Core)
§ Cache: 6 MB
§ Chipset Manufacturer: Intel
§ Chipset Model: HM65 Express
§ Standard Memory: 4 GB
§ Memory Technology: DDR3 SDRAM
§ Memory Standard: DDR3-1333/PC3-10600
§ Number of Total Memory Slots: 2
§ Hard Drive Capacity: 500 GB
§ Screen Size: 15.6"
§ Display Screen Type: Active Matrix TFT Color LCD
§ Aspect Ratio: 16:9
§ Screen Mode: WXGA
§ Backlight Technology: LED
§ Screen Resolution: 1366 x 768
§ Graphics Controller Manufacturer: Intel
§ Graphics Controller Model: HD 3000
§ Graphics Memory Capacity: 1.65 GB
§ Graphics Memory Accessibility: Shared
§ Ethernet Technology: Fast Ethernet
§ Wi-Fi: Yes
§ Wi-Fi Standard: IEEE 802.11b/g/n
§ Webcam: Yes
§ Operating System: Genuine Windows 7 Home Premium with SP1
§ Operating System Architecture: 64-bit
§ Pointing Device Type: TouchPad
§ Number of Cells: 6-cell
§ Battery Chemistry: Lithium Ion (Li-Ion)
§ Width: 15.0"
§ Depth: 9.8"
§ Weight (Approximate): 5.40 lb
§ Package Contents:
§ Satellite P755-S5375 Notebook
§ Lithium Ion Battery
§ AC Adapter
§ Green Compliant: Yes
§ Green Compliance Certificate/Authority: RoHS
Installed programs:
Name Version
Microsoft Application Error Reporting 12.0.6015.5000
Microsoft Office Click-to-Run 2010 14.0.4763.1000
Microsoft Office 2010 14.0.4763.1000
Windows Live Essentials 15.4.3502.0922
Apple Application Support 2.1.7
Windows Live Writer 15.4.3502.0922
Microsoft_VC90_MFCLOC_x86 1.00.0000
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148 9.0.30729.4148
TOSHIBA Web Camera Application 2.0.3.3
Windows Live Messenger 15.4.3538.0513
Microsoft_VC90_CRT_x86 1.00.0000
Google Toolbar for Internet Explorer 1.0.0
Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219 10.0.40219
Microsoft Visual C++ 2005 Redistributable (x64) 8.0.61000
Microsoft SQL Server 2005 Compact Edition [ENU] 3.1.0000
Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219 10.0.40219
Toshiba Online Backup 2.0.0.31
TOSHIBA ReelTime 1.7.21.64
Windows Live Remote Client Resources 15.4.5722.2
Windows Live SOXE Definitions 15.4.3502.0922
Adobe AIR 3.1.0.4880
Windows Live Mesh ActiveX Control for Remote Connections 15.4.5722.2
Windows Live Communications Platform 15.4.3502.0922
Windows Live Movie Maker 15.4.3502.0922
Apple Software Update 2.1.3.127
Windows Live UX Platform Language Pack 15.4.3508.1109
Windows Live Photo Gallery 15.4.3502.0922
bl 1.0.0
Windows Live Mail 15.4.3502.0922
Java(TM) 6 Update 25 6.0.250
MSVCRT_amd64 15.4.2862.0708
TOSHIBA Face Recognition 3.1.17.64
ph 1.0.0
Adobe Widget Browser 2.0.348
Windows Live Writer 15.4.3502.0922
Mesh Runtime 15.4.5722.2
TOSHIBA Supervisor Password 1.63.51.2C
Adobe Acrobat X Pro - English, Fran軋is, Deutsch 10.1.1
Adobe Reader X MUI 10.0.0
TOSHIBA Media Controller Plug-in 1.0.7.5
Windows Live Photo Gallery 15.4.3502.0922
Windows Live Photo Common 15.4.3502.0922
Label@Once 1.0 1.0
PDF Settings CS6 11.0
Toshiba Book Place 2.2.7530
Windows Live PIMT Platform 15.4.3508.1109
TOSHIBA Wireless LAN Indicator 1.0.5
D3DX10 15.4.2368.0902
Utility Common Driver 1.0.52.3C
Junk Mail filter update 15.4.3502.0922
Windows Live Movie Maker 15.4.3502.0922
TOSHIBA HDD/SSD Alert 3.1.64.9
Windows Live Remote Service 15.4.5722.2
Toshiba App Place 1.0.6.3
Windows Live Mesh 15.4.3502.0922
Windows Live Language Selector 15.4.3538.0513
QuickTime 7.72.80.56
Renesas Electronics USB 3.0 Host Controller Driver 2.0.34.0
TOSHIBA Value Added Package 1.6.1.64
Microsoft_VC80_CRT_x86 8.0.50727.4053
Google Update Helper 1.3.21.111
TOSHIBA HDD Protection 2.2.2.15
7-Zip 9.20 (x64 edition) 9.20.00.0
TOSHIBA PC Health Monitor 1.7.9.64
Windows Live Mail 15.4.3502.0922
Adobe Help Manager 4.0.244
MSVCRT 15.4.2862.0708
Windows Live Remote Client 15.4.5722.2
Blackmagic ATEM Switchers 3.0.1.0
Microsoft_VC90_MFC_x86 1.00.0000
Windows Live Photo Common 15.4.3502.0922
Windows Live ID Sign-in Assistant 7.250.4232.0
Microsoft Visual C++ 2005 Redistributable 8.0.61001
Windows Live Messenger 15.4.3538.0513
Windows Live Mesh 15.4.3502.0922
Windows Live Writer 15.4.3502.0922
Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.4148 9.0.30729.4148
Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.17 9.0.30729
TOSHIBA Hardware Setup 1.63.1.37C
Microsoft Silverlight 4.0.50401.0
PlayReady PC Runtime x86 1.3.0
Intel(R) WiDi 2.1.41.0
Windows Live MIME IFilter 15.4.3502.0922
TOSHIBA Flash Cards Support Utility 1.63.0.12C
TOSHIBA eco Utility 1.3.5.64
Windows Live UX Platform 15.4.3502.0922
TOSHIBA Wireless Display Monitor 1.0.1
Debugging Tools for Windows (x64) 6.12.2.633
Windows Live Remote Service Resources 15.4.5722.2
Windows Live Writer Resources 15.4.3502.0922
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.17 9.0.30729
Intel(R) PROSet/Wireless WiFi Software 14.01.1000
Windows Live Installer 15.4.3502.0922
TOSHIBA Disc Creator 2.1.0.11 for x64
PlayReady PC Runtime amd64 1.3.0
Windows Live SOXE 15.4.3502.0922
Java Auto Updater 2.0.4.1
TOSHIBA Bulletin Board 1.6.08.64
Crash details:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1041
Additional information about the problem:
BCCode: d1
BCP1: 0000000000000001
BCP2: 0000000000000002
BCP3: 0000000000000008
BCP4: 0000000000000001
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\090312-28516-01.dmp
C:\Users\xxx\AppData\Local\Temp\WER-62696-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\windows\system32\en-US\erofflps.txt
DMP file details
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`02e04000 PsLoadedModuleList = 0xfffff800`03048670
Debug session time: Mon Sep 3 02:27:16.190 2012 (UTC + 9:00)
System Uptime: 0 days 0:06:50.096
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck D1, {1, 2, 8, 1}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : ntkrnlmp.exe ( nt!KiPageFault+260 )
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000001, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000008, value 0 = read operation, 1 = write operation
Arg4: 0000000000000001, address which referenced memory
Debugging Details:
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800030b2100
0000000000000001
CURRENT_IRQL: 2
FAULTING_IP:
+6130613031313361
00000000`00000001 ?? ???
PROCESS_NAME: System
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xD1
TRAP_FRAME: fffff80000b9c740 -- (.trap 0xfffff80000b9c740)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff80000b9c801 rbx=0000000000000000 rcx=fffffa8004586618
rdx=fffff80000b9c8d8 rsi=0000000000000000 rdi=0000000000000000
rip=0000000000000001 rsp=fffff80000b9c8d0 rbp=0000892fc0ba4327
r8=fffff80000b9c8d0 r9=0000000000000000 r10=0000000004216094
r11=000000005e040600 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na pe nc
00000000`00000001 ?? ???
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80002e82769 to fffff80002e831c0
FAILED_INSTRUCTION_ADDRESS:
+6130613031313361
00000000`00000001 ?? ???
STACK_TEXT:
fffff800`00b9c5f8 fffff800`02e82769 : 00000000`0000000a 00000000`00000001 00000000`00000002 00000000`00000008 : nt!KeBugCheckEx
fffff800`00b9c600 fffff800`02e813e0 : 00000000`00000002 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff800`00b9c740 00000000`00000001 : 00000000`00000000 00000000`5e040600 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x260
fffff800`00b9c8d0 00000000`00000000 : 00000000`5e040600 00000000`00000000 00000000`00000000 00000000`080e8118 : 0x1
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!KiPageFault+260
fffff800`02e813e0 440f20c0 mov rax,cr8
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: nt!KiPageFault+260
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 4fa390f3
FAILURE_BUCKET_ID: X64_0xD1_CODE_AV_BAD_IP_nt!KiPageFault+260
BUCKET_ID: X64_0xD1_CODE_AV_BAD_IP_nt!KiPageFault+260
Followup: MachineOwnerCreate an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)
Imgburn will read the ACTUAL disc brand from the disc, which is not always the same as the box label (Memorex is notorious for buying "anything" and putting it inside a Memorex box)
When you write to disc with Imgburn, use the SLOWEST possible speed setting, so your burner has the best chance to create "good, well formed" laser burn holes... since no player is required to read a burned disc, having a "good" one from a high quality blank will help -
Audio & video don't match on burned blu-ray
Thanks to everyone on this forum, I was able to solve the blue screen of death issue!
Now a new problem: I successfully burned a blue ray. The menus work well and the picture is great, but the audio is about 20 seconds ahead of the video on all tracks. This problem only occurs on the finished blu-ray disc. In preview, the audio and video match perfectly.
I am using Encore version 6.0.1.13
Does anyone have this issue?
Here are my blu-ray drive and system details:
Here are the blu-ray drive specs:
Logitec USB 2.0/3.0 Bus powered portable bluray drive unit, LBD-PME6U3VBK
PIONEER BD-RW BDR-TD05 USB Device
Driver: 6.1.7601.17514
C:\windows\system32\DRIVERS\cdrom.sys
\windows\system32\Drivers\PXHlpa64.sys
\windows\system32\DRIVERS\tdcmdpst.sys
\windows\SysWOW64\drivers\Afc.sys
Renesas USB 3.0 driver also installed
The computer specs are as follows:
Manufacturer: Toshiba
Manufacturer Part Number: PSAY1U-05U027
Product Line: Satellite
Product Series: P755
Product Model: P755-S5375
Product Name: Satellite P755-S5375 Notebook
Product Type: Notebook
Processor Manufacturer: Intel
Processor Type: Core i7
Processor Model: i7-2670QM
Processor Speed: 2.20 GHz
Processor Core: Quad-core (4 Core)
Cache: 6 MB
Chipset Manufacturer: Intel
Chipset Model: HM65 Express
Standard Memory: 4 GB
Memory Technology: DDR3 SDRAM
Memory Standard: DDR3-1333/PC3-10600
Number of Total Memory Slots: 2
Hard Drive Capacity: 500 GB
Screen Size: 15.6"
Display Screen Type: Active Matrix TFT Color LCD
Aspect Ratio: 16:9
Screen Mode: WXGA
Backlight Technology: LED
Screen Resolution: 1366 x 768
Graphics Controller Manufacturer: Intel
Graphics Controller Model: HD 3000
Graphics Memory Capacity: 1.65 GB
Graphics Memory Accessibility: Shared
Ethernet Technology: Fast Ethernet
Wi-Fi: Yes
Wi-Fi Standard: IEEE 802.11b/g/n
Webcam: Yes
Operating System: Genuine Windows 7 Home Premium with SP1
Operating System Architecture: 64-bit
Pointing Device Type: TouchPad
Number of Cells: 6-cell
Battery Chemistry: Lithium Ion (Li-Ion)
Width: 15.0"
Depth: 9.8"
Weight (Approximate): 5.40 lb
Package Contents:
Satellite P755-S5375 Notebook
Lithium Ion Battery
AC Adapter
Green Compliant: Yes
Green Compliance Certificate/Authority: RoHS
Installed programs:
Name Version
Microsoft Application Error Reporting 12.0.6015.5000
Microsoft Office Click-to-Run 2010 14.0.4763.1000
Microsoft Office 2010 14.0.4763.1000
Windows Live Essentials 15.4.3502.0922
Apple Application Support 2.1.7
Windows Live Writer 15.4.3502.0922
Microsoft_VC90_MFCLOC_x86 1.00.0000
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148 9.0.30729.4148
TOSHIBA Web Camera Application 2.0.3.3
Windows Live Messenger 15.4.3538.0513
Microsoft_VC90_CRT_x86 1.00.0000
Google Toolbar for Internet Explorer 1.0.0
Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219 10.0.40219
Microsoft Visual C++ 2005 Redistributable (x64) 8.0.61000
Microsoft SQL Server 2005 Compact Edition [ENU] 3.1.0000
Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219 10.0.40219
Toshiba Online Backup 2.0.0.31
TOSHIBA ReelTime 1.7.21.64
Windows Live Remote Client Resources 15.4.5722.2
Windows Live SOXE Definitions 15.4.3502.0922
Adobe AIR 3.1.0.4880
Windows Live Mesh ActiveX Control for Remote Connections 15.4.5722.2
Windows Live Communications Platform 15.4.3502.0922
Windows Live Movie Maker 15.4.3502.0922
Apple Software Update 2.1.3.127
Windows Live UX Platform Language Pack 15.4.3508.1109
Windows Live Photo Gallery 15.4.3502.0922
bl 1.0.0
Windows Live Mail 15.4.3502.0922
Java(TM) 6 Update 25 6.0.250
MSVCRT_amd64 15.4.2862.0708
TOSHIBA Face Recognition 3.1.17.64
ph 1.0.0
Adobe Widget Browser 2.0.348
Windows Live Writer 15.4.3502.0922
Mesh Runtime 15.4.5722.2
TOSHIBA Supervisor Password 1.63.51.2C
Adobe Acrobat X Pro - English, Fran軋is, Deutsch 10.1.1
Adobe Reader X MUI 10.0.0
TOSHIBA Media Controller Plug-in 1.0.7.5
Windows Live Photo Gallery 15.4.3502.0922
Windows Live Photo Common 15.4.3502.0922
Label@Once 1.0 1.0
PDF Settings CS6 11.0
Toshiba Book Place 2.2.7530
Windows Live PIMT Platform 15.4.3508.1109
TOSHIBA Wireless LAN Indicator 1.0.5
D3DX10 15.4.2368.0902
Utility Common Driver 1.0.52.3C
Junk Mail filter update 15.4.3502.0922
Windows Live Movie Maker 15.4.3502.0922
TOSHIBA HDD/SSD Alert 3.1.64.9
Windows Live Remote Service 15.4.5722.2
Toshiba App Place 1.0.6.3
Windows Live Mesh 15.4.3502.0922
Windows Live Language Selector 15.4.3538.0513
QuickTime 7.72.80.56
Renesas Electronics USB 3.0 Host Controller Driver 2.0.34.0
TOSHIBA Value Added Package 1.6.1.64
Microsoft_VC80_CRT_x86 8.0.50727.4053
Google Update Helper 1.3.21.111
TOSHIBA HDD Protection 2.2.2.15
7-Zip 9.20 (x64 edition) 9.20.00.0
TOSHIBA PC Health Monitor 1.7.9.64
Windows Live Mail 15.4.3502.0922
Adobe Help Manager 4.0.244
MSVCRT 15.4.2862.0708
Windows Live Remote Client 15.4.5722.2
Blackmagic ATEM Switchers 3.0.1.0
Microsoft_VC90_MFC_x86 1.00.0000
Windows Live Photo Common 15.4.3502.0922
Windows Live ID Sign-in Assistant 7.250.4232.0
Microsoft Visual C++ 2005 Redistributable 8.0.61001
Windows Live Messenger 15.4.3538.0513
Windows Live Mesh 15.4.3502.0922
Windows Live Writer 15.4.3502.0922
Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.4148 9.0.30729.4148
Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.17 9.0.30729
TOSHIBA Hardware Setup 1.63.1.37C
Microsoft Silverlight 4.0.50401.0
PlayReady PC Runtime x86 1.3.0
Intel(R) WiDi 2.1.41.0
Windows Live MIME IFilter 15.4.3502.0922
TOSHIBA Flash Cards Support Utility 1.63.0.12C
TOSHIBA eco Utility 1.3.5.64
Windows Live UX Platform 15.4.3502.0922
TOSHIBA Wireless Display Monitor 1.0.1
Debugging Tools for Windows (x64) 6.12.2.633
Windows Live Remote Service Resources 15.4.5722.2
Windows Live Writer Resources 15.4.3502.0922
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.17 9.0.30729
Intel(R) PROSet/Wireless WiFi Software 14.01.1000
Windows Live Installer 15.4.3502.0922
TOSHIBA Disc Creator 2.1.0.11 for x64
PlayReady PC Runtime amd64 1.3.0
Windows Live SOXE 15.4.3502.0922
Java Auto Updater 2.0.4.1
TOSHIBA Bulletin Board 1.6.08.64Well, I am at the limit of being able to help, since I only write to DVD
But, if your video is showing as being untranscoded, I would agree that "something" is going wrong while transcoding
If you click on the 622722 link I provided, you "should" be able to figure out how to export out of Premiere Pro to create a file that Encore does not need to transcode
Otherwise, you'll have to wait for someone who uses assets like yours to create a BluRay to come along and, hopefully, point out what you need to change
These may not help, but they are a couple of links I saved about audio/video sync problems
Fix for audio out of Sync on Export http://forums.adobe.com/thread/955524
-and http://forums.adobe.com/thread/436751?tstart=120 -
ENCORE CS6 gives error message during the burning of Blu-ray Disc
I did it again - upgraded my Production Premium CS5 to CS6.
I will not forget CS4 that never came to work. It was not a workable version, but at best an Alfa or maybe Beta version.
I was therefore naturally afraid to upgrade my reasonably well functioning CS5 version, but did it anyway.
My fears kept unfortunately connectors. Audition CS6 scratchy and crunches a lot when I change Audio Device from MME to ASIO. It should be noted, that none of my other programs have this problem neither my Soundbooth nor Audition 5.5 which I fortunately still have installed. So it is only Audition CS6 that crunches with ASIO4ALL.
Encore CS6 is also a problem child. When I try to burn a Blu-ray Disc I get, in the final phase, following error message: Blu-ray Error: "device error", Code: "CreateStcSequence: Fail to write M2S file"
Fortunately, I can open the project file in my Encore CS5, which do not have the same problem. Encore CS6 cannot be used as a standalone application - I still need to have a previous version installed to complete my projects. It is not fair.
Unfortunately I can see that many others have the same problem. Even worse, however, that Adobe still has not come with an update or fair solution of the problem - after so long.
It annoys me infinitely, I every time have to spend so much time on the Internet in an attempt to find solutions to remedy Adobe problems. These are programs I have paid dearly for - exactly twice as much as others living in the U.S. pay - just because I live in Europe.
If there is a user who has some useful suggestions I would appreciate it very much.
I must complain about my bad English.
Thank you in advance.Hi Jim,
ISO files also works for me, but that's not what I paid for.
So far I use just the previous version CS5, but hope at some point to get CS6 to work. -
What do i need to burn blu-rays?
Hello everyone. I'm new to Final Cut Pro, and Macs in general, so please bare with me. I'm a film student, and recently purchased a Canon XH-A1s and a Mac Pro with Final Cut Pro 6 to jump start my video production business.
My only problem is that i only have the ability to produce HD video, so when it comes to distribution, DVD is really not an option. I've heard with an upgrade to Final Cut Pro 7 that you can finally burn Blu-Rays without a third party application, just wondering if that was true.
I was planning on upgrading to Final Cut Pro 7, and purchasing an external, USB Blu-Ray read/write drive. Should everything work ok if i go down that route?
Thanks everyone,
-Billy
Message was edited by: blakes2406The Mac does not come with a Blu-ray burner. So you would be burning a Blu-ray compatible file to a standard DVD-5 or DVD-9. Neither of which are ideal for authoring Blu-ray content.
Do an exhaustive search online about Blu-ray authoring and disk creation. This is not something for the hobbyist video creator (and I say hobbyist in the sense that you're not creating thousands of copies for mass distribution, so no one take offense.)
Blu-ray is expensive and requires a lot of planning and prep to do it right. But you can't burn an official Blu-ray disc on a Mac as they stand. And, Compressor doesn't burn discs, it only creates files. DVD Studio Pro would be the app that would burn the Blu-ray disc, and DVDSP has not been upgraded since long before Blu-ray came on the scene. -
I want to burn my HDV 50i movie from Premiere Pro CS4 to Blu-ray disc. I click File > Output > Media, then select HDV etc, MPEG2 Blu-ray, start queue and it does the encoding. When it's finished it doesn't ask me to insert a disc, or where to burn it to, or anything. It just sits there doing nothing. If I look in My Documents\Adobe\PremierePro\4.0 I can find the movie, but if I drag and drop it to the Blu-ray, it says "Some files could not be added because the formats are not supported or the files could not be found." What is wrong? My Blu-ray burner is LG GGW-H20L, my HD is 500GB, 3GB RAM, Intel 2 Quad Q6600 2.4GHz
Do you HAVE to use Encore or not to burn Blu-ray? Some say you do, some say you don't.
I looked at the video "Exporting your project" and everything works fine up to the point where the film is fully rendered in Adobe Media Encoder, except she says it goes into a folder called Exercise Files\Assets - it doesn't - it goes into 4.0 Then she says you can export it to wherever you want but she doesn't tell you how.
The only way I can find the rendered movie is to click File > Export > Media again and click Output Name which brings up the Save As window where the movie is listed, then R click on it and send it to Instant Burn CD, but then it either does nothing, or it says "D:\ is not accessible. Incorrect function", or it says "Windows cannot read from this disc, or you could be using a format that is not compatible with windows."
Then I read the tutorial called "Authoring and burning Blu-ray discs." I did all the right things in Encore, Clicked OK, and it briefly flashed up a window saying it was importing the project or something, then that vanished, and nothing else happened. So nothing works!
Am I very stupid, or is my system totaly crap?
Tim -
Sony Blu Ray Player connect issue
Just added a Sony BDP S350 Blu Ray player to my network via a WGA54G. It appears I can connect to BD Live sites but not Sony's firmware update server. I can connect to that server when I go wired directly through the DSL modem. I have also tried to connect through the router and a cat line but no luck. I use DHCP and WEP 64 bit. Everything else is default....
Any thoughts?mle724,
You need to use the same wireless security encryption on the router and adapter (either WPA2 or WEP, but not both). If you make these changes it should work.
EDIT: Looking at the spec for the WGA54G I see that it only supports WEP, therefore the only option would be for you to change the security on the router to WEP.
You also need to use the same passphrase (or keys) for the router and adapter.
Check page 28 (troubleshooting) of your WGA54G manual and under #1 it will show:
Make sure that the SSID is the same as the SSID of the access point.
On the WEP Encryption screen, make sure that all of the WEP settings are the same as the WEP settings of the access point.
http://www.linksys.com/servlet/Satellite?blobcol=urldata&blobheadername1=Content-Type&blobheadername...
Message Edited by rdodolak on 12-17-2008 11:06 AM -
?? about Sony blue-ray player
I looked at the setup for my player and this is a selection; BD Hybrid Disc Playback Layer with the direction ....Set the playback layer when using a BD hybrid disc. with the choice to select BD or DVD/CD. I am wanting create a slideshow of images in PRE11 no menu just a few transitions; how do I need to burn this ? I have a new computer with a Blue-ray burner. I have already created a slideshow dvd and it plays in the blueray player but I want it to repeat playing. I appreciate any help.
Sony Blu_ray discDVDPlayer BDP-S470Hi Vesta
I am working on a more detailed answer to your DVD-VIDEO on DVD disc looping question. I have threads scattered about here and elsewhere. Several seeming to be success stories. I am just checking to make sure that they still work since it has been a while since I looked at them.
http://forums.adobe.com/message/2518188
What is the duration of your Timeline and how many times did you want the Timeline content to loop in the DVD-VIDEO on DVD disc playback?
There are 3rd party software that have been used successfully to take the Premiere Elements DVD burn to folder VIDEO_TS and add commands for the looping. But then you must find a 3rd party software for burning the VIDEO_TS edited for looping to a DVD disc. ImgBurn has been suggested, but I just want to make sure it does first hand. That pgcedit software and infoEdit.
pgcedit: http://www.wireshome.com/Geoff_Pell/Looping_%20DVD_using_PgcEdit.pdf
ifoEdit: http://www.techarp.com/showarticle.aspx?artno=421
If you had a Windows Live Movie Maker/Windows DVD Maker workflow, looping would be available in Windows DVD Maker.
http://lehsys.blogspot.com/2011/06/how-to-loop-video-using-windows-live.html
But, I do not know if that is all that advisable with your present project goals and the video editing advantages of Premiere Elements. Did you say that you have Windows 7 or 8 64 bit? Windows 8 no longer comes with the Windows DVD Maker.
Definitely the easiest way out is through the player controls. I checked out your Sony BDP-5470.
http://store.sony.com/p/BDP-S470/en/p/BDPS470#specifications
Under Function, did you try
"Repeat (All/1 title): Yes (All/1 title/1 chapter/1 track". Not sure what that is all about, but worth a look at.
Did you call Sony sales to see if you could get the definitive answer on looping playback with your Sony player?
More later.
ATR -
Use Express to connect Blu-ray
I just got a Blu-ray player that can do BD-Live. The player needs an internet connection but I do not have one in that room. I would like to run an ethernet cable from the Blu-ray player to an Airport Express (802.11g) to connect the player to my wireless network. Can the Airport Express work this way? Is there a special setup? I am already using the Airport Express to wirelessly connect to the stereo in this room with AirTunes. Can it do both? Only one at a time? Only AirTunes?
Thanks,
-= Ken =-I would like to connect a sony s-550 with bd-live to my airport express which i use to extend my network. I have the airport extreme in another room and all computers are macs...this should be easy but I am a little leary about how I should go about connecting it...can anybody help a 58 yr old woman with this question?
-
I am about to get a mac mini for my home theatre. I have put most of my dvd's on my external HD and plan to steam them to my tv, but I don't know how to put my blu rays on the HD. I have a 2TB drive so I'm not worried about compressing them, but I wondered if I can hook my blu ray player to my mac with the hdmi port and then if there's a good program to rip blu rays. Thanks
Recent changes to MakeMKV and VLC enables Blu-ray movies to be played 'live' on Apple Macs without having to resort to either file conversion or using bootcamp.
Although not super-easy it is well within the capability of the vast majority of Mac users. To Help I have written a how-to tutorial on my blog at www.TheAppleChap.com
A direct link is included below:
http://www.theapplechap.com/TheAppleChap/Blog/Entries/2011/2/11Playing_Blu-ray_discs_on_a_Mac_inOSX.html
For information regarding connecting a Blu-ray player to a Mac and basic Blu-ray file conversion, please see my how-to guide linked to below.
http://www.theapplechap.com/TheAppleChap/Blog/Entries/2010/6/20Getting_the_most_out_of_Blu-ray_on_aMac.html
I can confirm that the movies look and sound fantastic and I encourage you to have a go if you have a Blu-ray drive attached.
TheAppleChap -
Can I upgrade my DVD Rom to Blu Ray drive? If so I can I find a compatible part?
Hi @godlovingman ,
Thank you for visiting the HP Support Forums and Welcome. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link to get the support number for your region. They will be happy to assist you immediately with some part numbers and check your specs.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!
Maybe you are looking for
-
Can you transfer files using Time Machine back-up to a new computer?
I have an early 2006 iMac and would like to get a new one. Would I be able to copy the files that I want moved to the new computer by using my Time Machine back-up? I would only want to transfer a handful of items including my iTunes and iPhoto libra
-
Panorama and Windows 8.1
Why does panorama no longer function with Windows 8.1
-
Smartforms:Can i call a Tcod from Driver Prg 4 its o/p 2 be appended
Hello Smartform Gurus I need 2 call 1 tcode from my Driver prog ,which has report o/p that is 2 be appended in my Smartform o/p as a appended page . Is it possible at all ? plz throw some light on this . thnx Moni
-
Bug in ResultSet#getDate() with ojdbc7-12.1.0.1
As "documented" here java - ResultSet#getDate() semantics - Stack Overflow there seems to be a bug in ResultSet#getDate() with ojdbc7-12.1.0.1. The java.sql.Date condition To conform with the definition of SQL DATE, the millisecond values wrapped by
-
Webservice1 TO RFC TO Webservice2 ----all Synchronous
Hi, I am running a scenario Webservice1(EP)--RFC-Webservice2(client). i am able to send the request to RFC , RFC response is able to send to webservice2 request, and webservice2 response is has to go to webservice1 response(problem is here). the pro