Bin determination in automatic TO creation for posting changes

Hello guys,
could someone provide some information or some links on how the automatic bin determination for posting changes will be processed in SAP WM?
Actually I'm looking for some further information for automated processing during a posting with movement type 309.
What data from the posting change will be taken into account for the automated bin determination?
Or is it 100 % comparable to the standard putaway / stock removal strategies?
Thanks for some hints on that.

Hi,
I would like to add a point here that there is possibility of transmitting a screen widow to hav the value of GR number. You can do the settings in OMLR in the AddlData for the appropriate Mvt (eg 321)
This will cause to have the GR number to the PCN, which is compared with the GR no in the quant existing, while creating the TO wrt PCN.
For eg: Material           Qty              Stk catgry                Bin                      GRno
                 A                  20                    Q                      B001                  5000000102
                 A                  40                    Q                      B003                  5000000140
Now, when transfering the stock category form Quality to unrestricted, for 20 qty, a PCN will be created bforethat a pop-up screen flows in which u'll b giving the GR no as 5000000140.
So u have the PCN for Qty 20, with GR no 5000000140.
When u create a TO wrt PCN, system will pick the stock from the bin B003.
I don't know how far this may light u.
Reg
Prasanna

Similar Messages

How to create automatic Transfer Order for posting change delivery mvt.321?

Hi,
We are using HU with WM functionality; While posting stocks after UD, the system creates a posting change delivery instead of directly posting the stock to unrestricted stock from quality stock.
Now that we have to process the ourbound delivery bu creating a transfer order and confirming it and also do a Post Goods Issue against delivery then only the system posts the stock into unrestricted stock.
Our client doesn't want to go thro' these process steps. They would like the stock to be posted to unrestricted automatically after UD stock posting (movement type 321). Is there a way out to automatically process the posting change delivery in the background including Transfer order creation and confirmation and PGI please?
Thank you,
Regards,
Madhavkrishnaa.

Pls see the customizing.
SPRO: Logistic Excution>Warehouse management>interfaces-->Define Quality management

Automatic TO Creation for 321 movement (WM and QM integration)

Dear experts,
Can anybody guide for how to create auto transfer orders with reference to posting change number for 321 movement document?
Best Regards,
Anand Rao

This has to be done in WM. Activate the automatic TO creation for the releavnt Inventory/warehouse movement . Its under interafces - inventory management in the WM component in config.
Thanks,
Ram

Automatic TO creation for delivery

Dear Experts ,
We are facing a problem with Automatic TO creation for delivery only in some storage types ( not all the types , some types are working fine )
The problem happened after we applied a user exit for a specific picking strategy , but even after we have cancelled that user exit still problem remained.
We have checked the following settings, and everything seems fine:
1-Warehouse management - Activities u2013 transfers u2013 define Mvt type
2-Warehouse management u2013 interfaces- Automatic TO creation
Looking for your help in this issue
Thanks ,
Malik

Hi Malik,
You mentioned that you have previously implemented the picking user-exit and removed it later. Did you enter the correct picking strategy for the effected storage types after removing the user-exit? This could be one reason.
What happens when you try to create the TO manually?
Regards,
Osman

Immediate TO for posting change

Hi,
Is it possible to have immediate TO for posting change?
I have done the following setting in LE-WM Interface to Inventory Management: Assigned the reference movement to WM movement and checked the indicator for Create transfer order immediately -A.
I am able to manually convert the psoting change notice -> TO without any error. The system also works fine in case of Automatic TO. However the system does not create TO's immediately.
I have one more question: During Automatic / Immediate TO creation, how does the system know the affected stock? For ex.
In case of transfer posting using 321, how will the system select the source?
Regards
Deepak

Hi,
I think the following may apply to your issue.
When you post a material document in IM, and movement types both "with" and "without" automatic transfer order creation exist in that document, the system does not start the automatic transfer order creation program.
Check out this link: http://help.sap.com/saphelp_47x200/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm

No quants exist for posting changes. Creating TOu00B4s in LU04.

When creating transfer orders in LU04, we get an error message "No quants exist for posting changes'. We are using batch managed and serialized materials. Using QM interface, so, inspection lots are created at Goods Receipt. When QM team "accepts" batch materials during inspection lot, there is no problem, but when "accepts" serialized materials, the system creates posting changes notices but can not create transfer orders sending the message before described. This is because after receiving the serialized materials, we receive one piece at a time in order to create one inspection lot for every serial number. But when we put away the materials, we put them away in the same bin. so, system assigns one quant and one inspection lot to the bin, updating the last one every time we put away one serial number. When system tries to look for the inspection lot number selected in QA32, is not finding it in the bin at WM level because the bin only contains the last inspection lot that was put it away.
With batch managed numbers there is no problem since SAP divides the bin in different quants with the correspondent batches assigning an inspection lot to each quant.
Is there any alternative to solve the issue with the serialized materials? We are using SAP ECC 6.0.
Thanks for any help.

Hi,
The reason why we put away serialized materials into the same bin is because materials are physically small and they fit more than one in each bin. The warehouse is structured in this way and we plan to use it like that because it wouldn´t be feasible to create one bin for each serialized material. Is there any other way to manage this situation?
Thanks in advance.

Error occurred during WM processing for posting change delivery

Hi Experts,
I am getting the following error when i try to create Outbound delivery aginst PO.
"L9 612 Error occurred during WM processing for posting change delivery"
Diagnosis
    The indicator AUFER from the delivery type contradicts the
    storage location constellation that was determined by the
    WM system.
    TVLK-AUFER = '<VAR2>'
    WM = '<VAR1>'
1.Purchase order is Stock transport order ME21N ( UB)
2.Try to create Outbound using VL10B and i am getting the above error,
Thanks in advance.
Cheers...Gopi

Hi Gopi,
Looking at problem you discribed, I am assuming you are using the delivery type other than "NL".
The reason for this error is the indicator "order required" in delivery type defination set to 'X : sales order required' and you have assigned this delivery type to the purshasing document UB in STO customising. So the requirement of delivery defination of having prior document as sales order is conflicting.. so the error is there.
Resolution:
Please change the assigned delivery type to NL to purchasing document type UB in SPRO> MM> Purchase order>set up for STO>assign delivery type and checking rule.
If you have custome delivery type the go to spro> LE> shipping>deliveries>define delivery type
change the order required from X to "B".
Hope this will help.
Regards,
Sudhir

No quants exist for posting changes

Dear Experts ,
Please help on that error which is coming when i am trying to release the stock from qualtiy to unrestricted "no quants exist for posting changes" in transaction LU04.since the stock is moving successfully from 902 to 922 storage type but while trying to move from 922 to destination bin, these message is coming up .Please help.
Regards

Hi Frenchy,
Thanks for co-operation.Actually , i am running the process as mentioned below , please revise and check,
1- (MIGO) GR for warehous managed stock
2- (LT06)create TO for TR which has been created in MIGO
3- (LT12 ) confirm that TO.
4-(QA32) release the stock from quality to unrestricted
5- (LT05) while I am trying to process the posting change document , that error is coming and when i checked that posting change no.through (LU03) , i found it is still not processed with stauts blank so please guide what is the reason for that error .
Best Rergards

Maintain number range interval 01 for posting change notices

Hi,
I am doing transfer posting using movement type 321 (quality to unrestricted) for one material.While posting i am getting error"Maintain number range interval 01 for posting change notices" Message no. L0015
WM is active for this material and doing this movement for one plant which is newly created in system.Wil you please advice for which document type i had to maintain number range.Please inform SPRO path / Transaction to be used to make required changes.
Thanks & Regards
Atharva

Maintain number range for posting change in tcode OMLW

No Quants exisats for posting changes

Hi,
When I create transfer order for the posting change number, I am getting the error message
"No Quants exisats for posting changes"
It is not allowing to create transfer order.
Thanks and regards
Muruegsan

Please share the screen with posting change notice 3 so that we can know what it did.
As far as I can assume, it is completely processed.
See the field below - Post.Chge Status - share the screen with this status, and share the
screen from LU03 with complete info on PCN...

Automatic TO Creation for QM Usage Decision

Dear Gurus
We all know WM TO to releasing stock from QI to UU or return goods to vendor can be created automatically,
My question is, when the usage decision is split into two, some material going into stock, and some returned to vendor. for return to vendor, SAP will do automatic transfer, but for material go into stock, SAP is not release Q status in WMS to unrestricted (blank), I have set the movement 321 to create TO automatically and post into same bin.
FYI, if the transaction is separated, SAP perform well (transfer Q to unrestricted done automatically and return to vendor also done automatically)
Is there any solution for this problem?
Thanks and Regards
CJ Lee

Hi,
In case of a usage decision for a partial quantity, it is not possible to create the TO for the generated posting change notice automatically. This is only possible when the full quantity is released. The same happens if you release a partial quantity and post the rest using a different stock posting. The reason is, there needs to be a user decision, which part of the quantity has to be posted, this is necessary for example when the quantity is distributed in the warehouse over many storage bins. But even if the full quantity is on one storage bin, there is no automatic TO creation. You can see this also in the online processing LT05), in case of partial quantities you have to enter the selected quantity in the quant list, for a full posting this is not necessary.
Hope this helps.
Regards,
Sinéad Curran

Daily Automatic delivery creation for Finished Products

Dear All,
As per my client requirement, they need automatic delivery creation when ever the finished products posted(Reached) in to the Finished Products Storage location with out time specification.
Scenario is like this.
1.Scheduling agreement will be created for one month or one year for the specific customer with specific products.
2.After producing the material, from the production line finished products will taken in to the Finished product Storage location with some acknowledgement.
3.When ever the acknowledgement happen(stock get added) automatic delivery need to be created for that acknowledged quantity with reference the scheduling agreement.
4.There is no time specification When ever the finished products stock acknowledgement happen automatic delivery need to be created.
5.There is no quantity specification also what is the quantity at finished products Storage location acknowledged for that quantity automatic delivery need to be created .
6.If there is no production-->There is finished products -->No delivery should trigger.
This will be applicable to specific customer and specific material only.
Please give your valuable inputs as early as possible.
Regards,
Murali.

Dear Rohit,
1) Who creates the acknowledgement..
-->Finished Products Storage location people will run this entry when they recieve the finished product from the production line.
2) How frequently is this acknowledgement created..
-->When ever receives the finished products from the production line,
3) Is this acknowledgement a print out or a documetn type.
-->It is not a print or document type, it is just an Transfer posting entry to add the Finished products qty to the existing stock at that particular storage location.
4) If it is document type does it appear in document flow.
-->No it will not come in the document flow.
I hope it will clear for you,
Regards,
Murali.

Automatic Batch creation for a material.

Hi Friends,
we require automatic batch creation at the time of confirmation of process order for a particular material not for all the materials existing in the same plant and also not for all the materials existing in the same material type.
we have activated batch level at the material level,
Pl give some idea,
Regards
Sadan

Hi,
Batch is created automatically either when an order is created or released. (setting in OPKP)
I hope its not possible during confirmation.

AFAB dynamic variant creation for Posting period.

HI,
Business Requirement :
Business want to run AFAB transaction code every month automatically with schedule job.
system should pick present month period in posting period field.
i checked in variant creation against posting period there is no dynamic " D " in selection variable column.
how can i fix this.

Hi Jani,
Check with abaper if TVARV table can Help you in this case, or create a z program from AFAB. And add date field to it, and schedule job based on that,
I think TVARV table will be a better approach.
Another point to consider here would be that dep should be run once business is ready to do so, and has its own hick ups in business if corrections are required to be made after executing AFAB by job
Regards
Pankaj B.

Automatic TO Creation for Inventory loading

Hi ,
Is there any way to create Transfer Order for a material document with 561 movement type (With and without Handling Units ) ?
I believe system doesn't create any TR for intial inventory upload , is that also correct ?
Regards
Sandeep

Dear Sandeep,
You can configure to create the transfer requirement or transfer order creation for 561 movments also. under
customizing path: SPRO --> Logistics Execution --> Warehouse management --> Interfaces --> Inventory Management --> Define Movement Types
In case you want to do with HU management then there will be delivery gets created instead of material document.
so naturally you can putaway or pick using the delivery document.
Kind regards,
Ramana

Bin determination in automatic TO creation for posting changes

Similar Messages

Maybe you are looking for