Bin to bin transfer from SU managed storage type to NON SU storage type

Hi Experts ,
Kindly guide as how i can  perform  Bin to bin transfer from SU managed storage type to NON SU storage type
Thanks
Jinoy

There is no particular technique for this. You can use single or collective method (LT01 or LT10).
Provide the source SU and destination storage type and bin and save the TO. Your transfer will be complete.
The SU number will be lost because you have moved the stock to a non SU storage type.
Regards,
Aroop

Similar Messages

  • Manual staging from IM managed Storage location

    Hello all,
    I have a client process where i want to do a manual staging from a IM based storage location to production.
    Is it possible to do a manual staging to production from an IM based storage location and if there are any process pl. let me know. post the t-code and the process and any documents/links related to it.
    Thanks,
    Maxx

    Can i use the Transfer posting for manual material staging to move the stock from IM based storage location to production.
    Is it possible as i am not sure whether production has a separate storage location.
    Please define your question... How can you expect an answer w/o knowing yourself what are you asking???
    You asked about material staging from storage location to production. You can use MF60 (or MF60+MF65) for this purpose.
    If there's no production storage location you can post only GI (mvt 261) e.g in CO27, MIGO, MB1A, etc.
    Edited by: Csaba Szommer on Jan 17, 2010 8:37 PM

  • Document transfer from Solution Manager into ARIS

    We have sucessfully transfer projects content from Solman into ARIS. Unfortunatelly links to documents cannot be found. To my knowledge links from General documentation answell as from Project documentation should be able to find in ARIS after the transfer. Has anybody any ideas about this.
    Kind regads

    Hi,
    Yes, either link to both "Gen. Documentation" and "Project Documentation" should be accessible. Or else, atleast either one of them should be accessible.
    Some configuration is missing in ARIS side, which allows you to access this link from ARIS diagram.
    best regds,
    Alagammai.

  • The Question about stock transfer between HU-Management and WM-Management

    Hi,
    There is a scenario about stock transfer between HU-Management and WM-Management storage location. I use transaction MB1B , movement type 313 , 315. After Good issue from WM-management storage location, outbound delivery will genarated, then Pack, Create/Confirm TO, at last post goods issue for the outboud delivery. But when i do movement type 315, there is a warning message "Data of preceding document was not transmitted", and from the F1 help i find this system reponse "You can maintain an indicator that makes information about preceding documents in this delivery available under delivery type in Customizing. For some characteristics of this indicator, the type of preceding document and the related document and item numbers must be transmitted to delivery creation. At least one of these parameters is missing.".
    So, My questions are:
    1. Generallily, Outbound delivery is created by SO, inbound delivery is created referenc PO, but how the stock transfer for 2 steps generate the outbould delivery and inbound delivery? Could you pls tell me the where i can config this in the IMG?
    2. What's "Data of preceding document was not transmitted" mean ? how to fix this issue ?
    Best Regards
    Boxer Du
    I am the SAP fans, focus on MM and WM. I am interesting TRM Yard Management and Cross Docking now.Very Gladly to talk you about these areas. I want to exchange the knowledge with you, and want to be a good friend of you. Pls contact me. You can find My MSN in the profile. Thanks.

    Hi,
    Sure, The inbound delivery type is set up in the IMG->Logistics General -> HU management -> Basics ->Delivery type -> Delivery type determination.
    For Inbound delivery type 'HID' is maintained in this view.
    Best Regards.
    Some One want to discuss the details , can contact me. Thanks.

  • HT4847 i have done a factory restore on  my ipad. i backed everything up but some of my apps are not up. i did however find them in the manage storage under my device. is there a way to restore the app back to my main screen?

    I am trying to get a certain app back on my main screen from the manage storage section of my ipad. Does anyone know how to do that?

    Solve my own problem!!!!!!!!!!!!!

  • Stock transfer from 998 storage type to Physical bins

    Dear Experts,
    As part of data conversion,After loading huge stock into SAP 998 st type into INITIAL bin,I want to move the stock into physical bins.I have SU management activated.
    1)During the initial upload to 998 , I have taken Material slip field as storage bin coordinate in the external system, How would I move the stock into respective bins in SAP?
    2) How would I map SAP bins with stock locations (counter part for storage bins in external system) ? So that I want to make sure , stock will be placed into the right bins.
    3)What will be my approach for moving the stock into physical bins? Can it be through LSMW - LT01 with 999 movement type? Or is there any other method i can use?
    4)Is there any tamplete to use for the above process? Do I need to develop any conversion program?
    4) I want to print the storage units simultaneously during this process. How can I do this?
    I really appreciate your help.
    Thanks

    Answering your questions:
    1)During the initial upload to 998 , I have taken Material slip field as storage bin coordinate in the external system, How would I move the stock into respective bins in SAP?
    Use this info to load the stock into the correct storage bin
    2) How would I map SAP bins with stock locations (counter part for storage bins in external system) ? So that I want to make sure , stock will be placed into the right bins.
    Don't really understand what your doubt is, but if your MM/WM setup is correct, this should go OK
    3)What will be my approach for moving the stock into physical bins? Can it be through LSMW - LT01 with 999 movement type? Or is there any other method i can use?
    LSMW, with 'Standard batch/Direct Input' Object 0220 and Method 0000 (should be assigned to program RLBEST00).
    4)Is there any tamplete to use for the above process? Do I need to develop any conversion program?
    Based on previous answer, no!
    4) I want to print the storage units simultaneously during this process. How can I do this?
    Just assign the correct print code to the 561 movement type...but beware for the fact that a lot of labels will be generated at the same time and you can stuck your printer :s

  • Transfer from specific bin

    How do I transfer from a spedific bin to another storage location using mm.
    I have the same product in multiple bins and don't want fifo to choose.
    Thanks,
    Chris
    Edited by: gmanwizo on May 9, 2011 1:01 PM

    Hi,
    If all the settings are done for the ware house management , while doing transaction at MIGO for stock transfer , system will ask for a source bin and a destination bin for the TR/TO creation.
    Please try posting the transfer posting as per that.
    Please check the settings at sprologistics execution-ware house management ---
    Regards,

  • Storage bin transfer

    Hello
    In a WM managed Storage loc, I did 309 from A to B which have different st bins X & Y resp.But the system did transfer to mat B in st bin X
    But I want to transfer it to Y
    Do I have to do st bin transfer also? How?
    Thanks & regards
    Dinesh

    Hi Dinesh,
    309 Mvt refers to Material to Material Transfer, right. Also, at WM level these transfers (Unrestricted to Blocked, QI to Unrestricted) are managed as Posting Changes (No physical movement of Goods, Goods will be there in the same bin).
    Thanks & Regards,
    Ramkumar

  • Stock transfer from bin to bin

    hi,
    In stock transfer from bin to bin process i need solution for the below requirement...
    a)The system must raise a warning when a material is transferred to another bin, which already contains the same material with a different batch number.
    b)Transferring stock to a single batch location which already contains another material/batch is not allowed.
    In bin to bin stock transfer  process, it is possible by  system   to propose destination bin  automatically ?
    Thanks
    Muthuraman.D

    The requirements that you have may be fulfilled using 'mixed storage' options available in the storage type configuration. However, there are rigid prerequisities to use certain options such as usage of storage unit management and bulk storage strategy. You may look into a custom putaway strategy (MWMTO003) to fulfill your requirements. 
    As for automatic proposal of bin during bin-bin transfer, it is pretty much the same set up that you'd use for any other putaway. This includes, enabling storage type search (sections & bin type, if applicable) along with indicators, defining the relevant putaway strategy, and assignment of indicators in the material masters.

  • Bin to BIN transfer storage unit

    Dear All,
    I am moving the stock from open bin to actual bins but system is creating a new storage unit number.  But when I transfer from normal bin to normal bin system keep the same SU number. My requirement is to keep the same SU number when moving from open bin to normal bin.  Could you please advise how can I do this.
    Regards
    Sakkir

    when you transfer partial quantity from a source storage unit to another bin it creates a new Storage unit number and when you transfer full quantity of a source storage unit to another bin then system retain the same storage unit number.
    In your case it seems when you are transferring the stock from open to actual bin then the quantity is partial hence system is creating a new storage unit number and when you are doing actual bin to bin then you are transferring the full quantity hence system is retaining the same storage unit number

  • How to block storage bin transfer

    Dear experts,
    I have an issue. Fo example, a material is already been flagged for deletion. All transfer from plant level up to storage location is already blocked. But I can still do bin transfer using LT01. Can we block LT01 as well?
    Please advise.
    Best Regards,
    Hasniza

    Hi
    In that case if the storage bin is getting blocked then it will affect the postings of other materials , so better to go with material level
    Do one cycle in your development/quality server and ensure that it is working fine as per the clients requirement, take care of other exceptional scenarios also if any.
    Regards
    Amuthan M

  • **Batch managed and serial number managed partial stock bin 2 bin transfer

    Hi Experts,
    I have my stock which is batch managed and also serial number managed. Now if i want to perform partial stock transfer from one bin to another i use LT01 with movement type 999 i am able to see the batch (suppose i just want to transfer material 1 of batch # 100). This batch # 100 has 10 materials with different serial numbers. But when i use LT01 i can see the batch of the material but not the specific serial number of the material that i am transferring.
    My question----- Is there any specific transaction where i can also see the serial number of that material that i am transfering to another bin or is it some thing that needs to be customized?
    Regards
    Albert

    Hi ,
    Just check with Tr.Code  : 'IQ09'
    There are many options available.
    Regards
    R

  • Is it possible to Extend the Storage Bin Length from 10 Char to 25 Char

    Dear Experts,
    We have a Requirement for Extending the Storage Bin Length from 10 Character to 25 Character.
    Question 1:
    Is it possible to Extend or Not?
    Question 2:
    Even if we extend what will be Impact on the Current Storage Bin Numbers used now.
    Thanks for your support in Advance.

    No, you can't change length for storage bin field in standard and also it is not suggestable to client. If client forcing on requirement, You can suggest like below.
    create one more field for EXT.storage bin by using enhancement  and do one customized report for show as ,  storage bin number+EXT.storage bin = actual storage bin.
    For only client reference you do this report and in standard reports it will not show like this else tell to client ---> it is not possible, because it is replicating and using at different programmes.

  • Transport the created Storage Bin Automatic from develop to quality LS10

    Hello,
    My customer has created a new entry in LS10 u2013 Create Storage Bin Automatically in the development system with a transport order.
    He forgot to do Environment u2013 Create bins. I did it with my user in the development system and SAP has created the bins automatically (the system creates and launch a batch-input). The system did not ask me for a transport order (I think because this created data is master data).
    The user has transported the transport order from development to quality system but the Storage Bins are not in QAS. I told to the user that the Storage Bin are master data and we has to do Environment u2013 Create bins in each new environment but LS10 transaction has status 'not modifiable' in quality and production system.
    There is a way to transport the created Storage Bin Automatically from development to quality and production? Now the user is asking me to have the Storage Bins in quality and production with access LS10 in status 'not modifiable'.
    Cheers,
    Marta

    I could not transport them but I have created the storage bin directly in QAS with LS05 because LS10 is not available.
    Thank you very much.

  • Replenishment From SU Managed Bulk Storage Type

    Hi Experts,
    We are trying to implement Immediate TO Creation Random Bin Management from a SU Managed Bulk Storage Type.
    Our scenario is the following:
    We have a SU Managed Bulk Stype: Stype 702
    We have a SU Managed Stype with Putaway Strategy "P": Stype 701
    We have material 11000026 and we define the following in WM View 2:
    Max Qt: 6000
    Min Qt: 2000
    Replenishment Qt: 3000 
    Whenever a delivery TO from 701 is confirmed, and the stock level of material 11000026 in SType 701 drops below the Min. Qt, we need the system to immediately generate a replenishment TO: 3000 kg from Source SType 702 to Destination SType 701.
    So far we have done the following:
    Created a WM.Mov.Type 721, for which Manual TO creation is not allowed and with Ref.Stor.type Search 721.
    We defined Replenishment Control for SType 701: with Replenishment Mov.Type 721 and Replenishment Technique 2.
    Created SType Indicator with Operation A and Ref.Stor.type Search 721; in the sequence the first and only SType is Stype 702.
    We assigned the SType Indicator to Material in WM View 1.
    Whenever we actually confirm a delivery TO from 701 and the stock level drops below the min Qt., the system is not generating the immediate TO. What is the correct configuration or how can I achieve our request?
    (The configuration described above works perfectly between STypes that have both the same Putaway Strategy, "P")
    Thank you,
    Leonidas Oyaga

    Hi Mihailo,
    Just tried running Tx. LT0R. I get Error Message No. L3009: "no destination storage bin to be found in storage type 701."
    (Before doing this, I deleted ID Point 711 from SType 701).
    I believe the issue is related to the relationship between SU Managed Bulk SType (702) and SType 701. In 702 stock in a storage bin can be identified based on the SU. However, when creating the TR or OT the system is not able to find a destination storage bin because the quantity taken from a storage bin in 702 is greater than the max quantity allowed in a single storage bin in 701. As if when picking the quantities it is trying to deliver the whole quantity to a single storage bin instead of transfering each SU (1000 KG per SU) to a different storage bin.
    For Instance:
    Material 11000026 Stype 701
    Min Qt: 2000
    Max Qt: 6000
    Replenishment Qt: 4000
    Storage Bin Capacity in 701: 1000
    When stock level drops belowe Min. Qt, and the system tries to do replenishment from 702 by delivering 4000, the system is not able to find a storage bin in storage type 701 because it excedes the storage bin capacity.
    Best Regards,
    Leonidas Oyaga

Maybe you are looking for