Bin to BIN transfer storage unit

Dear All,
I am moving the stock from open bin to actual bins but system is creating a new storage unit number.  But when I transfer from normal bin to normal bin system keep the same SU number. My requirement is to keep the same SU number when moving from open bin to normal bin.  Could you please advise how can I do this.
Regards
Sakkir

when you transfer partial quantity from a source storage unit to another bin it creates a new Storage unit number and when you transfer full quantity of a source storage unit to another bin then system retain the same storage unit number.
In your case it seems when you are transferring the stock from open to actual bin then the quantity is partial hence system is creating a new storage unit number and when you are doing actual bin to bin then you are transferring the full quantity hence system is retaining the same storage unit number

Similar Messages

  • RF transaction for Bin to Bin in Storage Unit

    hi ALL,
    I am very new to ABAP. I have got this development where I have to develop three RF screens for transferring \Stock from one bin to another in the same SU. Can you please help me in writing the program for the same.

    when you transfer partial quantity from a source storage unit to another bin it creates a new Storage unit number and when you transfer full quantity of a source storage unit to another bin then system retain the same storage unit number.
    In your case it seems when you are transferring the stock from open to actual bin then the quantity is partial hence system is creating a new storage unit number and when you are doing actual bin to bin then you are transferring the full quantity hence system is retaining the same storage unit number

  • Storage Unit & Storage Bin

    Dear All,
    How to make that one storage bin can have serveral storage unit?
    Such as we want one storage bin can contain three pallets.
    regards
    Gang

    Hi,
    There is no restriction on using any no. of storage unit types for a storage bin. Storage unit types are defined at warehouse level. The path is Logistics Execution -> Warehouse Management -> Master Data -> Material -> Define Storage unit types.
    You can define any no. of SUT for a warehouse. Now these SUTs are assigned to materials in material master WM view 2. And materials are linked to bins. SO, whatever materails you have for a bin the SUTs for those materials are all valid for that bin...
    Hope this is of some help for you..
    Regards,
    Noopur

  • Storage unit types and storage bin types  - Need

    Hi,
    i want to know what is the use of the storage unit type and storage bin type.
    thanks,
    Maxx

    Dear Maxx,
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/c6/f844694afa11d182b90000e829fbfe/frameset.htm
    Storage Bin:
    A storage type generally contains several storage spaces or slots. These are called storage bins in Warehouse Management (WM). The storage bin is the smallest available unit of space in a warehouse. The storage bin therefore describes the position in the warehouse where the goods are or can be stored.
    Since the address of a storage bin is frequently derived from a coordinate system, a storage bin is often referred to as a coordinate. The coordinate 01-02-03 for example, can refer to a storage bin in row 1, stack 2, and level 3.
    You assign each storage bin to a specific warehouse number and storage type according to its location. You must also assign each storage bin to a storage section.
    You can also define the following additional characteristics of a storage bin:
    Maximum weight
    Total capacity
    Fire containment section
    Storage bin type (for example, for small or large pallets)
    With certain stock placement strategies, the storage bin type plays a significant role in optimizing the automatic search for a storage bin in connection with the pallet type. For example, you can define the WM putaway strategy to place large industrial pallets into a specific large bin type and smaller pallets into small bins.
    Storage Unit:
    In the system, a storage unit record consists of a header and at least one material data record (quant data record).
    The header contains information which is relevant for the entire storage unit and includes the:
    Storage unit number
    Storage unit type (SUT) of the storage unit
    Storage bin in which the storage unit is currently located
    Status, which provides current information about the storage unit
    Specific information about the stock contained in a storage unit is found in the material data record. The material record is already familiar to you in the existing system as a quant data record. For SU management, this information can be managed at the storage unit level.
    The following graphics illustrate how WM handles storage bins with and without the use of storage unit management. For these examples, storage bins are displayed in which 200 boxes of red pencils and 50 boxes of blue pencils are stored. The stock is distributed on two pallets.
    Hope this will help.
    Regards,
    Naveen.

  • Storage Unit Stock Transfer

    Dear All,
    I would need some assistance on how to carry out stock transfers between storage units. I have a practical issue, where i want to transfer storage unit quantity from one sales order to another sales order. What is the transaction i have to use & what is the movement corresponding to this.
    Shall await an early reply.
    Thanks & Regard
    Shabeen Buhary

    Dear Csaba,
    Thankyou very much for your prompt response.
    You have understood the scenario to near perfection, ideally this is the scenario.
    Inventory management i grn 200yds of fabric for SO_A /Line item 10 & SO_A /Line item 20. Thus when GRN it would be in the same batch ( Batch A)
    In WM i palletize the stock as below
    SO_A / Line item 10 - Roll 1 (55yds)
    SO_A / Line item 20 -  Roll 1 (45yds)
    SO_A / Line item 10 - Roll 2 (45yds)
    SO_A / Line item 20 -  Roll 2 (55yds)
    All the above Rolls (Storage unit are of the same batch A)
    Since both rolls that is Roll1 & Roll2 are shared across two line items, is there any possibility in the WM system where i could transfer the Roll stocks and ensure the stocks are as below:
    SO_A / Line item 10 - Roll 1 (100yds) * by doing a storage unit transfer between SO/Line items (10&20)
                                                              I am transferring 45yds from Roll 1 from SO_A / Line item 20 
                                                              to Roll 2. 
    SO_A / Line item 10 - Roll 2 (100yds) * by doing a storage unit transfer between SO/Line items (10&20)
                                                             I am transferring 45yds from Roll 2 for SO_A / Line item 10 
                                                             to Roll 1.
    Hope this is clear.
    Please pardon me for asking this question, since i am new to WM. I would want to know, if we have to do this via MB1B & LT06 for movement 413e or can we do it straight way in WM via LT10.
    Thanks once again for your prompt response
    Regards
    Shabeen Buhary

  • Same Storage Unit number for both source & destination storage bin

    Hi, I have a requirement to have same Storage Unit number for both source & destination storage bin in transfer order screen.. can any1 suggest how to do it?
    An early response is very much appreaciated

    Hello,
    You absolutely right.
    I've made necessary cust. settings berofe posting goods receipt with storage units:
    Customizing storage units number ranges:
    And storage units customizing:
    And also in Material Master:
    But i don't see the storage unit type number in storage bin:

  • Re :  No bin types have been assigned to storage unit type WM3

    Hai
             I am doing warehouse configuration. While creating transfer order i am getting the following error
    " No bin types have been assigned to storage unit type WM3 "
    How to solve this.
    Thanks
    Anto

    Hi,
    It seems there is some problem with configuration, check in the given path below for configuration.
    SPRO-IMG-Logistics execution-Warehouse management-Strategies-Activate Storage Bin Type Search,
    here in the first step you have to define storage bin types & in the next step you have assign it to your storage unit type.
    Bin types are when you have bin of different dimensions.
    Regards
    Ravi Shankar.

  • How much storage units can be added in the single bin.

    Hi all,
    Can anybody tell me how much storage units can be added in the single bin.
    Dev

    Hi Dev,
    AS Prashant & Abhijit mentioned above the maximum storage units in a single bin is based on various factors such the putaway strategy & capacity check you have set for your storage type as well as palletization data.
    Now in case of Bulk Storage which you have mentioned above, please go through the below F1 help for the block structure.
    In bulk storage, you need to define for each block (or row) how many
    storage units fit into the block.  For this purpose, you must define
    both the number of columns as well as the maximum stack height.  *The*
    product of these factors usually gives the maximum number of storage
    +units and is determined automatically by the system.  However, it is+
    possible to change the maximum number of storage units to a lower number
    if the storage bin or the material features require this.                                                                               
    Hope it helps.
    Thanks & Regards,

  • Storage bin type and storage unit type.

    Hi,
    Can anyone explain what is the differnce between the staorage bin type which is maintaine for storage bins and the storage unit type which is maintained in material master.
    Can any one correct me that My material storage unit type is maintained in TT and the storage bin for put awayis maintained in PC (storage bin type).
    is this the right way to be adapted.
    Sunil

    Hi,
    THe storage unit type is a description of how the material is stroed in the storage bin.
    Some bins may not able to allow a full pallet due to height restrictions,but a half-pallet may fit.so warehouse can define a storage unit type that defines a half-pallet and qty of the material that can fit on that half-pallet.
    Configuration menu path:IMG-logistics Execution-Warehouse Management-master data-material-define storage unit type.
    where as storage bin is the lowest level of storage defined in the warehouse.
    With Regards,
    Jaheer.

  • Bin to bin transfer from SU managed storage type to NON SU storage type

    Hi Experts ,
    Kindly guide as how i can  perform  Bin to bin transfer from SU managed storage type to NON SU storage type
    Thanks
    Jinoy

    There is no particular technique for this. You can use single or collective method (LT01 or LT10).
    Provide the source SU and destination storage type and bin and save the TO. Your transfer will be complete.
    The SU number will be lost because you have moved the stock to a non SU storage type.
    Regards,
    Aroop

  • Assigning storage bin type to storage unit type

    Hello guys,
    I would like to know the purpose of assigning the storage bin type to storage unit type in the storage bin type search table.
    Thanks,
    Maxx

    Hello Maxx,
    First let's understand what is the meaning of "Storage unit type"
      Storage unit type is type of pallet i.e. big pallet, small pallet, industrial pallets etc so all this pallets have standard sizes.
    Now let's understand what is the meaning of "Storage Bin type"
      Storage bin type the classification of storage bin according to their characteristic /size i.e. 1 meter bin, 2 meter bin , 4x2 bin etc
    Now if you have requirement that 1 meter bin should allow only small pallets not big pallet becuase it can not be fit in 1 meter bin so you can restrict this by assigning storage bin type to storage unit type.
    Hope this will help you to understand the concept for assigning Storage bin type to SU type.
    Regards
    Arif Mansuri

  • How to block storage bin transfer

    Dear experts,
    I have an issue. Fo example, a material is already been flagged for deletion. All transfer from plant level up to storage location is already blocked. But I can still do bin transfer using LT01. Can we block LT01 as well?
    Please advise.
    Best Regards,
    Hasniza

    Hi
    In that case if the storage bin is getting blocked then it will affect the postings of other materials , so better to go with material level
    Do one cycle in your development/quality server and ensure that it is working fine as per the clients requirement, take care of other exceptional scenarios also if any.
    Regards
    Amuthan M

  • Storage bin transfer

    Hello
    In a WM managed Storage loc, I did 309 from A to B which have different st bins X & Y resp.But the system did transfer to mat B in st bin X
    But I want to transfer it to Y
    Do I have to do st bin transfer also? How?
    Thanks & regards
    Dinesh

    Hi Dinesh,
    309 Mvt refers to Material to Material Transfer, right. Also, at WM level these transfers (Unrestricted to Blocked, QI to Unrestricted) are managed as Posting Changes (No physical movement of Goods, Goods will be there in the same bin).
    Thanks & Regards,
    Ramkumar

  • Adding more storage units to Bin.

    Hi i was working with some seven storage units of a BIN.
    But i had pressed , some functionality in LM01, now there were only two SU available.
    Now what should i do to increase the number of SU's to original seven storage units..
    pls help...
    Thanks in adv,

    it was due to the functionality of the buttons there.

  • Unable to confirm transfer order due to error message "enter a storage unit

    Hi guys:
    I am unable to confirm transfer order due to error message popping up and saying "enter a storage unit", and I tried to search it in whole thread in the forum,it was suggestion to pick up destination storage unit via ls24, but I did went to ls24 and trying to click that line(transfer order) but unable to find the storage unit, so is there another way to fix it?

    Hi Allen...
    Pls check if your Storage Type is SU Active. If yes, then system will create a storage unit according to the setting done for the storage unit management, perhaps in your case you are confirmin TO for the putaway.
    Pls confirm and revert
    Regards
    Shiva

Maybe you are looking for