Binaries don't run after installation of 8.1.7 on AIX 5.1

I'm new in installations over Unix systems and I'm experiencing an issue that you all should know how to solve this. After the installation procedures, I'm trying to run SVRMGRL or SQLPLUS, but I can't, it keeps giving me this error messages:
exec(): 0509-036 Cannot load program sqlplus because of the following errors:
0509-130 Symbol resolution failed for sqlplus because:
0509-136 Symbol pw_post (number 273) is not exported from
dependent module /unix.
0509-136 Symbol pw_wait (number 274) is not exported from
dependent module /unix.
0509-136 Symbol pw_config (number 275) is not exported from
dependent module /unix.
0509-136 Symbol aix_ora_pw_version3_required (number 276) is not exported from
dependent module /unix.
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
Anyone knows what's happening?
My product is Oracle 8.1.7 32bits, and my AIX is 5.1 64bits, but I've heard that it works anyway!
Thanks.

John, I've runned this script as root. Then executed as oracle the runInstaller script. Today I've also acquired the 64bit version of the 8.1.7. The problem persists the same. So I'm presuming that there's nothing wrong in installing a 32bit oracle product over a 64bit AIX system. Right now I'm stopped at the installation process, waiting for an assistance. I've activated the 64bit mode on AIX 5.1, and started the installation again. I'm having a lot of error messages about some "makefile" at the ins_rdbms.mk script file. Don't know what to do!

Similar Messages

  • InDesign CS4 don't run after installation

    Before installation of InDesign CS4, InDesign CS, InCopy CS3 and Bridge CS3 runs normally.
    After installed, InDesign CS4 don't run, and crashes (during 'Initialising application") with this log:
    AppName: indesign.exe
    AppVer: 6.0.3.557
    ModName: gdiplus.dll
    ModVer: 5.1.3102.5581
    Offset: 0002c72d
    InCopy CS3 no more run and report log:
    AppName: incopy.exe
    AppVer: 5.0.0.458
    ModName: gdiplus.dll
    ModVer: 5.1.3102.5581
    Offset: 0002c72d
    Bridge CS4 and ExtendScript Tookit CS4 don't run too. Here the logs:
    AppName: bridge.exe
    AppVer: 3.0.0.464
    ModName: gdiplus.dll
    ModVer: 5.1.3102.5581
    Offset: 0002c72d
    AppName: extendscript toolkit.exe
    AppVer: 3.0.0.41
    ModName: gdiplus.dll
    ModVer: 5.1.3102.5581
    Offset: 0002c72d
    Adobe support says this is a problem on the OS; Microsoft says the problem is on the application. I paid for Adobe product and cannot use it.
    I tried to update InDesign CS4, but this don't solved the problem.
    Acrobat 9 Pro and Photoshop CS runs normally.
    And I'm desperate. Please help.
    Thanks,
    coelho9

    After months of numerous attempts and frustration, I applied Microsoft KB958869 and... InDesign CS4 now runs fine. And I'm starting a new life after two decades working happily with PageMaker.

  • Forms9i Demos don't run after installation Sun's JDK 1.4.2.

    Hi,
    the Forms 9i Demos had been working very nice before I installed Sun JDK 1.4.2.
    Now the demo website opens and the initialisation process is running without completion and I can see only a gray applet box ..
    I installed the Jinitiator new without success.
    Here the start protocoll of the BI Graph Bean Demo:
    JInitiator: Version 1.3.1.9
    JRE-Version 1.3.1.9 Java HotSpot(TM) Client VM
    Proxy-Cnfiguration:No Proxy
    JAR cache enabled
    Location: C:\Dokumente und Einstellungen\Media Markt\Oracle Jar Cache
    Maximum size: 50 MB
    Compression level: 0
    Loading http://localhost:8888/forms90demo/java/f90all_jinit.jar from JAR cache
    Loading http://localhost:8888/forms90demo/jars/demo90.jar from JAR cache
    Loading http://localhost:8888/forms90demo/jars/FormsGraph.jar from JAR cache
    connectMode=HTTP, native.
    Forms Applet-Version : 90290
    Perspective for Java Version 1.1.
    Copyright(C) 1998-2001 Three D Graphics, Inc.
    Environment: Oracle Corporation
    Operating System: Windows 2000
    Java Version: 1.3.1.9
    Imaging Model: Lightweight
    Locale: de_DE
    Build Number [null].
    Perspective for Java Version 1.1.
    Copyright(C) 1998-2001 Three D Graphics, Inc.
    Environment: Oracle Corporation
    Operating System: Windows 2000
    Java Version: 1.3.1.9
    Imaging Model: Lightweight
    Locale: de_DE
    Build Number [null].
    Please help.
    Thank you
    Friedhold

    Thank you Sandu,
    I can see in the PATH only Oracle's pathes: D:\ iSuite9i\jdk\bin;D:\iSuite9i\jdk\jre\bin;D:\iSuite9i\jlib ...
    Please, any other suggestion ?
    Regards,
    Friedhold

  • "Build Application/settings/Advanced/Run after installation" is not working LV70

    Hi !
    Look at thread
    http://forums.ni.com/ni/board/message?board.id=170&message.id=129269
    Seems like "Run executable after installation" is not workin at all (LV70, W2K).
    I' been try all,
    - run directly *.BAT file
    - i great exe file what' s runn *.BAT file.
    If i run directly "CmdPrompt3.exe" (attachment , source) it's working but not
    with when i run "setup.exe" ?
    What is wrong ?
    What means "wait until done" ?
    BR
    -HeVi-
    Attachments:
    CommandPromt3.vi ‏23 KB

    Hi HeVi,
    I'm not sure that I completely understand what your issue is. Are you
    trying to launch a BAT-file after the installation of an application?
    In that case, I will recommend you to refer to the following
    KnowledgeBase:
    Running a Batch File Automatically After an Installation to Access Installed Files
    If the methods in this KB doesn't work, please let me know.
    Have fun!
    PS: I wish it was only 25 degrees celsius here - it's currently around the 40 degrees celsius in Austin...
    Message Edited by Philip C. on 07-08-2005 02:42 AM
    - Philip Courtois, Thinkbot Solutions

  • Photoshop cs 4 wont run after installation on mac book pro

    I recently brought the adobe design premium package with flash, illustrator, indesign, photoshop etc...
    after installation all other application works but just photoshop, it just wont start at all...
    it will pop up on the deck for a second or two and just disappear. the progra wont run at all. other applications like illustrator, indesign etc... all work just fine but just not photoshop... i dont get it what's wrong. no error or anything. just pop up and then disappear.
    the spec of my macbook pro
    mac osx 10.6.2
    2.53 ghz intel core 2 duo
    4 gb 1067 mhz ddr3

    So have you done the basics?
    Toss the PS folder and run the installer again?
    Run the updater from an app you can open? (this will update all)
    etc...

  • User crontab entries don't run after reboot until crontab is edited

    I'm running 10.3.9 so I can't use launchctl for this.
    I have a user on my system called backup. backup's only purpose is to take and store backups of some critical data on other local systems. I've written scripts that run from cron to take care of this, except it doesn't work after a reboot.
    I've been careful with paths and all that but I'll include my crontab:
    43 18 * * * ${HOME}/bin/backup-mysql
    02 * * * * /usr/bin/printenv > /tmp/cronPrintenv.txt
    When I boot my xserve, neither the printenv nor the backup-mysql command run at their scheduled times. The only cron-related activity in /var/log/system.log are root's jobs periodic daily, weekly and monthly.
    After I notice the problem and edit and save the crontab by su'ing to the backup user and entering "crontab -e" and saving, even though I've made no changes, the backup user's cron jobs start up again, I can find the ouput from the printenv in tmp where I'd expect it, and my backup script runs fine.
    Why don't these user cron jobs run after a reboot?
    Thanks!
    Frank
    XServe dual G5   Mac OS X (10.3.9)  

    Has anyone discovered the answer to this? I'm dealing with a very similar issue here, getting a cron job to execute. In my case, it's actually a @reboot process, so it's fairly important to have it work when the machine restarts.
    Any help would be appreciated.
    Thanks!

  • LV 8.5.1 Installer "run after installation" not executed in silent mode ; Autoupdate

    Hi all,
    I developed a software used "inhouse" by most of my colleagues. This software is changed continuously.
    In the past I had to inform everyone that there's a new release available.
    Thus I developed a "quick and dirty" autoupdate mechanism. (See attachments)
    The application looks for a file located on our server, which contains the version number of the most current release.
    If the version number of the installed software and the version number in this file differ, the Installer for the new release is executed.
    In the Installer settings I run the installed software after installation finished.
    So that the user doesn't notice there was an update and the software starts as allways.
    The installer is started with commandline options to install in silent mode with surpressed License Notification und supressed restart.
    The start of the installed software after installation works if I start setup.exe in "normal" manner (doubleclick setup.exe)
    BUT the software DOES NOT start after installation when installed in silent mode. (Commandline prompt: setup.exe /q /AcceptLicenses yes /r:n )
    (Tested with XP, Vista, 7)
    Does anyone know how to get this working ?
    Thanks in advance, best regards,
    Balze

    Balze wrote:
    Hi Andrey,
    neither /qb nor /qf works
    Well, just checked - it seems to be works as expected in LabVIEW 2010 and doesn't work with 8.5.1 as you have described.
    There are some bugs in installer's builder was fixed between versions 8.5 and 10.0.
    What you can do - upgrade to latest LabVIEW version or try to fix installer manually. I guess trouble present in \bin\dp\install.msi file. You can check what inside of msi with Orcas utility provided by Microsoft.
    Hope it helps,
    with best regards,
    Andrey.
    PS
    Whole family a little bit ill due to relative cold weather...

  • Apps don't work after installation

    I have downloaded Creative Cloud and successfully downloaded Photoshop and InDesign. They work when first downloaded, but if I leave my computer and come back later, they won't open. It keeps saying Error 11 and that installation components are missing. I have uninstalled and re-installed about three times now and the same thing keeps happening. How do I fix this??

    You need to run the installs with sufficient user privileges and make your security tools behave. something is removing/blocking components, which could be due to your user not being allowed to make permanent changes to the system and system restore kicking in or an overzealous virus scanner running amok.
    Mylenium

  • What script to run after installation

    Hi gurus,
    I 'v just installed 11.5.5 "prod". Is there any script to run or i can start my implementation straight off.

    You must complete the following tasks to successfully install Oracle Applications 11.5.5:
    - Check the installation manual to complete the post installation steps
    - Read the Known Product Issues section of these release notes and determine when to take the actions listed there
    - Read the Installation Update Notes for your platform
    - Follow the instructions in Installing Oracle Applications to complete your installation of Oracle Applications Release 11i
    - Use AutoPatch to apply AD mini-pack F
    Note: You may be required to apply AD mini-packs as a part of your Oracle Applications installation, even after you have completed your implementation.
    Oracle Applications databases included in Rapid Install 11.5.5 have invalid objects in both the fresh-install production database and the Vision Demo database. You can safely ignore these errors.
    Note: 155875.1 - Release 11.5.5 Release Notes
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=155875.1

  • ITunes 10.1.1 for Windows (64-bit) Does Not Run After Installation

    I recently upgraded my laptop to Windows 7 and downloaded the 64-bit installer (iTunes64Setup). Although I recieve the notice that it was installed, when I start it up, I receive the "iTunes Library.itl cannot be read..." error message whenever I try to start it.
    I have uninstalled the program, deleted the original setup file (iTunes64Setup), downloaded it again and re-installed it twice with no success.
    Is there something I am doing wrong? Any assistance is greatly appreciated.
    Thanks,
    John

    Finally got it installed and running.

  • Desktop Manager will not run after installation

    I have recently reinstalled Windows XP on my PC, so I am trying to get the Desktop Manager software back on to my computer. I have tried installing several times from the original software disk (version 4.2, I think) and have also tried downloading from the Blackberry website and from cnet, and even from the TMobile website. Each time I try, everything seems to install just fine, but when I try to open the desktop manager it does nothing, it's just a blank window that eventually just closes. When I try to open the Device Manager, I get an error message that says "This application has failed to start because libBBLaunchAgent.dll was not found. Re-installing the application may fix this problem." So I have tried re-installing over and over and every time I get the same result, no matter if I download from the disk or from any website. I have tried to search my computer for the .dll file but there are no results, even in hidden folders. I have done a google search of the .dll file and nothing comes up so I am completely lost and clueless. I have never had trouble installing this software on my PC, it just won't install since I have re-installed Windows. Does anyone have any ideas or suggestions? I'd greatly appreciate it, thanks!

    Try using the Windows Installer Cleanup utility to see if it helps out. Can read up on that and other things to try when Windows Installer gives errors from here: http://support.microsoft.com/kb/555175
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • ITunes 7.6 won't run after installation, then won't reinstall

    Upgraded to 7.6 and when I tried to run it, received message that files were missing and that I should re-download. So I went to downloads, clicked and was immediately thanked for upgrading...nothing else. Have gone through all the suggestions, including removal of all things Apple. Still get the same message when I try to download. Now I don't have iTunes at all.

    If you don't see the download window when you try to download from APple, you security software may be blocking it. You could try turning off popup blocking to see if that helps.
    If you can't get it to work, many people find that downloading from FileHippo works.
    http://filehippo.com/download_itunes/

  • Air wont run after installation

    I am using Vista. I downloaded air and then installed it from the adobe site with no probelms, but everytime i go to open it, it says something like the installation was corrupted. so i tried uninstalling then installing again and even just reinstalling, but i still get this error when i go to run it. Please help me.

    help please?

  • Flash Player doesn't run after installation

    I have recently purchased a new iMac, and have just installed the latest Flash Player. According to the dialog box, the player was successfully installed.
    However, I still cannot view pages requiring Flash Player - for example, http://www.adobe.com/products/premiere/switch.edu.html  - as it says I need to download Flash Player. I have confirmed that Javascript is enabled, yet I still cannot view the page. I tried reinstalling Flash Player but to no avail.

  • How to run executable after installation?

    Hi everyone,
    I created an installer from one labview program with the application builder
    of Labview7.1 for my customer, and this installer will be burned
    on a CD. There are several configuration files which should be always
    modified, so I want to give the customer a possibility that he can
    change them by himself without creation of a new installer , I think the
    "run executable after installation" is the way to do it, but I don't know
    how to implement such an executable command to copy some files from CD to
    the destination directory which the program should be installed, could
    anyone give me some tips? Thans a lot!
    Le

    When you setup your build file, add the files using SourceFile Tab>>add support files, then click on custom destination, here you can add support files during installation. Hope this is what you are looking for.
    Paul
    Paul Falkenstein
    Coleman Technologies Inc.
    CLA, CPI, AIA-Vision
    Labview 4.0- 2013, RT, Vision, FPGA

Maybe you are looking for