Binary output at the digital output pin as 1111 1111 1111

Hi
I am using DAQ 6009 and i need a output as 1111 1111 1111 at the digital output(12pin )of the DAQ.Please give an idea or a vi to do so
Thanks in advance...
Solved!
Go to Solution.

DKLabView wrote:
I am using DAQ 6009 and i need a output as 1111 1111 1111 at the digital output(12pin )of the DAQ.
It seems that you want to generate static value(s) on 12 pins of USB-6009. Find attached example and let me know if it helps.
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.
Attachments:
Example - Write Digital [LV 2009].vi ‏10 KB

Similar Messages

Can I connect the digital output of flat screen to digital stereo output?

can I connect the digital output of flat screen to digital stereo output?

Hello JRefugio,
Welcome to the Sony Community.
Are you referring to a Sony flat screen TV? What is the model number of the device to which you wish to connect the digital output from the flat screen? It is required to know the exact model number of the Sony product so that the appropriate information can be provided.
Thank you for your post.

Actually i use the mini-jack to cinch connection to stream music to my stereo. is there a possibility to use the digital output? my sterea amply does not have a digital imput.

actually i use the mini-jack to cinch connection to stream music to my stereo. is there a possibility to use the digital output? my stereo amp does not have a digital imput. are there good converters available?

By default, your AirPort Express is using an internal DAC to convert the digital audio stream to analog when you connect an analog audio cable to it audio output port. You can; however, connect an external DAC to the same port using a optical digital cable and let the external DAC do the conversion for your stereo.

How to read back the output state for digital output or anlog output ?

I use NI-pci 6221(68PIN) Accquistion card to do measurmet,after i do digital output ,or anlog output ,I find that the output will be maitained by the card.even after i exit my accquistion program.But if i reset the card ,the ouptut also will be reset.
Now if i don't reset the card ,how can i read back the output state,?

Hi Mike,
There is no way for you to internally route an analog output to an analog input. The only solution is to physically connect the two lines together with a wire.
I came to this conclusion through the following steps:
1- Start MAX and select the DAQmx device under "Devices and Interfaces>>NI-DAQmx Devices" that you want to internally route signals through.
2- Click on the "Device Routes" tab on the bottom of the right hand window (It defaults to the "Attributes" tab)
3- Line up the Source with the Destination to see if the connection can be internally routed (either direct or indirect)
I came to the above conclusion by following these steps for a PCI-6251 DAQ device (the analog output & input do not exist in the "Device Routes" tab therefore they do not support internal routing), but you should verify this for your specific hardware. Let me know if you have any other questions/concerns.
Cheers,
Jonah Paul
Applications Engineer
National Instruments
Jonah Paul
Marketing Manager, Embedded Software
Evaluate the LabVIEW RIO Platform! - ni.com/rioeval

Can I do a surround mix in Logic or Soundtrack using the digital output?

I'm wondering if I can make use of my home theater system to do surround mixing, or if I need an interface with discrete outputs.
I'm doing surround composition, so it would work great if I could do my initial stereo mix on my monitors, and then get a good surround mix preview using my home theater setup.
Does Logic or Soundtrack recognize the digital optical out as a 5.1 (or 6) channel output?

Thanks, Rick.
That is actually what I did - create folders and move topics into them. I also created a TOC - for a more streamlined navigation through the online help. (Otherwise, the folder names appear in the navigation, which is 'clunky'.) I suppose the TOC is also used for the creation of PDF output, although I am not sure. Anyway... it works... and I have a topic hierarchy - in my Project 'pod' and TOC.
Much appreciated,
Mary
P.S. Too bad there isn't an easier method of making a topic hierarchy in the Project. This can be accomplished in Flare without the need for extra folders. Oh well...

A question about the digital outputs on my sound card

I have a Sound Blaster PCI Express XiFi Extreme Audio soundcard (the blue colored one) and I'm wondering whether it's digital output is a coaxial or optical connector?

Okay, I have determined that it is an optical output. What I want to know now is how I can convert that to a stereo output.

Supplying 26 Analog Outputs and 104 Digital Outputs

I am a graduate student in CWRU and trying to control 26 brushless DC motors independently that requires 26 analog and 104 digital outputs. I couldn't find any card that is capable of this task. Can you please suggest some solution to my application?

Hello. I would recommend 7 NI-7344s. Each 7344 has 4 analog outputs to drive servo motors and 32 configurable digital input/output (DIO) lines. However, if you don't need the trajectory control from the 7344 (ie, you're just running your motors with a constant voltage or your feedback loop is slow enough for software), then you could use a few NI 6704 Analog Output boards (each with 16 AO lines) and a few DIO boards (such as the 6503 which has 96 static DIO lines).
If you can give me some more details about your application (what the DIO is used for, what kind of feedback you need, etc), then I should be able to recommend exact products for you.
Cheers,
Kyle V

Customize Output of the PO Output for Communication program R12

I have a requirement to change the output of the seeded PO Output for Communication program, so that it uses a custom RTF template to produce the documents.
To do this, I have registered this template in XML Publisher under the Purchasing application. I then navigated to Purchasing Super User > Setup > Purchasing > Document Types, and from the window opened, selected to update the Purchase Order Standard Type. From here, I updated the document name and the document type layout as my new custom template.
However, once I run the program, it completes with an error. The log file is pages and pages (that I won’t post here unless requested as necessary) but at the bottom is section produced that I think may be useful:
Updated PRINT_COUNT 1
doc Identifier: PO
Document ID:14004
Revision Num0
Document SubTypeSTANDARD
Document TypePO
GenerateDocument::2nd Constructor()
setFileName- m_documentType:PO, m_documentId:14004
setFileName- m_fileName:PO_84_700000049_0_US.pdf
GenerateDocument::Finished 3rd Constructor()
Setting PO template Code
Setting OKC template Code
Before calling genDocTue Jan 22 17:02:01 GMT 2013
Changed GenerateDocument::Inside the gendoc method
Calling the getDocument method
GenerateDocument::getDocument()- Set the Org Context
GenerateDocument::getDocument()
GenerateDocument::getDocument() - Searching in the repository
After Calling the getDocument method
Calling the getPOXsl method
Before setting the bind variables for the default layout in getPOXSL()
Document Template Code :NCC_STD_PO_RTF
Language Code :US
Document XSL Contents Tue Jan 22 17:02:01 GMT 2013
Retrieved the Document XSL Tue Jan 22 17:02:01 GMT 2013
Calling the getPOXml method
GenerateDocument::getPOXml() : l_exists 1
GenerateDocument::getPOXml() : m_whichTables MAIN
GenerateDocument::getPOXml()- Calling the POXMLGEN method Tue Jan 22 17:02:01 GMT 2013
Generated the Document XML Tue Jan 22 17:02:01 GMT 2013
Document XML Contents Tue Jan 22 17:02:01 GMT 2013
Calling the print util method:Tue Jan 22 17:02:01 GMT 2013
Passing Params to getBlobPDF :Tue Jan 22 17:02:01 GMT 2013
m_AppNames :PO
m_TemplateCodes :NCC_STD_PO_RTF
m_Languages :en
m_Territories :US
genDoc() : Exceptionjava.lang.Exception: Error while generating PDF :null
java.lang.Exception: Error while generating PDF :null
rolling back the complete program
As you can see it's definitely picking up my custom template (NCC_STD_PO_RTF), and it appears to error when tryign to generate it as PDF.
I have attempted to attach the seeded xsl template to my template definition - to test if the error is due to the program expecting a certain template format - but, as the seeded template is in that particular format, and my definition is expecting rdf, it will not let me.
I am wondering if anyone has a solution for this requirement. We would like to keep the business process the same as it was in 11i, by using the seeded program, but with a custom template. But I understand that in R12, creating a custom program replicated from the seeded may be the only viable solution.
This is on Oracle Applications version 12.1.3.
Any suggestions would be much appreciated, and if you think that any more information is required, let me know.
Thanks.

Publisher version is 10.1.3.4.2.
It seemed to be a data issue. When a certain test PO with a insufficient amount of data in the XML output was put through the template, and hit these clauses, it failed, and the concurrent program errored.

Is there a difference between the earphone output and the audio output of the docking connector, or is it in fact the same signal ?

Is there a difference between the earphone output and the audiooutput of the docking connector of the iphone 4, or is it in fact the same signal ?

One basic difference is that the LTE frequencies each is able to operate on are different. After that, it is pretty much the same phone. Others might be able to add to this.

The digital output drop to 0

Hi,
i have this circuit to control the direction of brushless dc motor
to remove the brake the brake should connected to Black and this happen after i give D0 and D3 high and this one work fine
to move back same we have to connect brake + back + black then D0+D1+D3+D4should high and this one work fine
when i want to move Forward should BRAKE+BACK +FRW+BLACK then the 6 pins should be high , but in this situation all the pins is low
any suggestion ?
the module i have 9403 and cdaq 9188

How much current do you need for those optocouplers? If any more than 10mA, then this actually makes sense.
The 9403 has an overcurrent protection in it. When you reach a certain total output current (spec claims 64mA), then the OCP kicks in an turns all of the outputs to high impedance. I would recommend finding some digital buffers that can supply more current for you optocouplers. I frequency use the 74ACT245SC.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

?how do i ramp the Digital Output frequency?

I need to apply a linear ramp to the output frequency of my digital TTL
output to accelerate and deaccelerate the speed of a stepper motor - is
there any way to do this such that the ramp is continous?
using: Labview 5.0.1 on a PC with an AT-MIO-16E-1 board
-thanks

You can only decellerate the speed: see CTR Pulse Config.vi (see hierarchy
of Generate Pulse Train.vi).
In cluster 'low level parameters there is a auto-increment count value that
adds to phase 1 of each new period
wrote in message
news:[email protected]..
> I need to apply a linear ramp to the output frequency of my digital TTL
> output to accelerate and deaccelerate the speed of a stepper motor - is
> there any way to do this such that the ramp is continous?
>
> using: Labview 5.0.1 on a PC with an AT-MIO-16E-1 board
>
> -thanks

Colors are mismatched between photo and printed output. The printed output's tones are off.

This is an HP Photosmart Plus B210A printer.
I have almost-new print cartridges installed (correctly).
I have done a print quality test and the test page seems to be very good.
The paper I'm using is high-quality photo print paper.
I'm using quality setting of 'best'.
Thanks in advance for any advice.
This question was solved.
View Solution.

If it is not a hardware issue, then go into the printers folder, right click on your printer, then select properties. Select the color management tab, you can adjust colors from there.
This document below would apply to the hardware end of it:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02142902&cc=us&dlc=en&lc=en&product=4021935&tmp...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Analog Audio Output Jack for Digital Speakers with same jack configuration

I just purchased my first Mac, a Mac Pro. I can't get sound to my speakers using the analog out jack. With my old PC, there was a setting for "digital output" even though the digital speakers were attached via to the same style jack as the Mac's analog out jack. I've tried going to preferences but don't see a like setting for digital output. Is there a setting to do so and if not, is there an adapter to convert the Mac's digital audio out to the analog jack style?

Do you want digital or analog? Your question seems to imply that you have speakers that accept a digital signal but you also say you want analog...??
Anyway, my Mac Pro (2006 model) has separate analog and optical digital outputs on the back. The pictures on the apple website still show the same thing on the Mac Pro so I'm guessing it's the same. I think only the Mac laptops have the analog/optical digital combo jacks...
The optical digital outputs are the little white squarish ports beneath the rear firewire ports.
The MacPro does not have a SPDIF RCA style output. Maybe that is what you are thinking of from the windoze pc...
You should be able to enable the rear analog line output or the digital outputs from the System Preferences > Sound > Output screen. The front headphone outputs kind of act weird in that they disable the rear line output (if I remember correctly, I never use the front port...).

HT5783 My MacBook Pro (Mid-2009) digital output has stopped working. It turns on the red light at the other side of the plug, but fails to connect with my receiver. Output from Airport works fine.

It was working fine until now, and now suddenly, the sound is gone. I've tried PRAM and SMC reset. Nothing works.
Using the same cable with my airport express, through airplay, the sound comes out fine.
It wasn't working when on Mavericks, nor now, on Yosemite.

Hey marcalc,
Thanks for the question. I understand that you are experiencing issues with the digital output of your MacBook Pro. The following resource may provide a solution:
OS X Mavericks: If you can’t hear sound from your speakers
http://support.apple.com/kb/PH13841
If you’re trying to listen through a digital receiver
If you’re using your computer’s digital output port (not available on all computers), choose Apple menu > System Preferences, click Sound, then click Output. Make sure Digital Output is selected.
Make sure your computer is connected to a digital-ready receiver using an optical digital cable, and that your receiver is set up for digital input (see the information that came with your receiver).
Try adjusting the volume on your receiver. You can’t use the computer’s volume controls to adjust the volume while using digital output.
Thanks,
Matt M.

What is the best way to Sync Digital Output(TTL) with Analog Output?

I am trying to generate Analog waveform that synchronize the rising edge of a digital signal(TTL). The ttl will be used as trigger for camera. The board I have is USB-6343X. In my draft, I used a clock as ttl so I can tune frequency easily. Could any one tell me what's the best way to accomplish such task? My draft seems working, but I hope there's more neat way. Thanks in advance for any help!
Kind regards,
Eric

Hi Econg,
You should be able to trigger your TTL output with the analog output by using the ao/StartTrigger as your trigger source on the counter task. You wouldn't have to have the extra Get Full Terminal Name.vi in your analog output task.
Here is an example using your modified code. You will have to change the cDAQ1/ao/StartTigger to *your device*/ao/StartTrigger, but it should then trigger the counter output at the exact time when the analog output starts.

Binary output at the digital output pin as 1111 1111 1111

Similar Messages

Maybe you are looking for