BIND Failure due to ACL

Hey;
Ok i realise that it is a DNS issue however everything looks alright in server admin; does any one know what the specific issue is with this error and specific steps to fix?
Server Log below:
May 30 16:09:02 imac named[87612]: starting BIND 9.6.0-APPLE-P2 -f
May 30 16:09:02 imac named[87612]: built with '--prefix=/usr' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-dependency-tracking' '--sysconfdir=/private/etc' '--localstatedir=/private/var' '--enable-atomic=no' 'CFLAGS=-arch x86_64 -arch i386 -arch ppc -g -Os -pipe ' 'LDFLAGS=-arch x86_64 -arch i386 -arch ppc ' 'CXXFLAGS=-arch x86_64 -arch i386 -arch ppc -g -Os -pipe '
May 30 16:09:02 imac named[87612]: /etc/dns/publicView.conf.apple:1: undefined ACL 'mcdivine.com'
May 30 16:09:02 imac named[87612]: loading configuration: failure
May 30 16:09:02 imac named[87612]: exiting (due to fatal error)
May 30 16:09:02 imac com.apple.launchd[1] (org.isc.named[87612]): Exited with exit code: 1
May 30 16:09:02 imac com.apple.launchd[1] (org.isc.named): Throttling respawn: Will start in 10 seconds

Hello Raj,
Thanks once again for the answer.
I have a WebLogic Express 8.1 (A servlet conrainer only).
The webservices that I am developing doesn't use any of the EJB stuff, all they need is a servlet container and SOAP plumbing.
Since the webservices that I am trying to deploy are developed using the workshop 8.1, they have EJB stuff bundled with in them and I can't deploy them on a servlet conrainer.
Is there a way that I can create webservices using the workshop IDE but end up with no EJB dependencies in the application EAR.
I really appreciate your help.
Regards,
Kishore.

Similar Messages

Install failure due to "faulty DVD" problem: only with Family Pack?

After going through a few threads on the subject of installation failure due to tbe pseudo-faulty DVD, I have the impression that many users mention that they were using a Family Pack install DVD or in one case a "drop in". The former is my case. Please post if you have had this problem with Leopard install, and whether you were using a single licence, family pack or drop in. It's just a hunch, but perhaps this problem only affects a specific set of disks.

I believe that they are holding back on sending a new DVD until they know why there were defective ones. I read somewhere that they require a new SKU so that they will actually be a separate batch.
Can you borrow a DVD from anyone to install Leopard? You certainly would be allowed to legally do that. I am surmising that Apple is overloaded with requests for a replacement DVD and really want to make sure it works. You know that old thing about "fool me once..."
Stuff happens - but with Leopard, a lot of stuff sure happened at once. They sold 2 million DVDs. If only 5% have problems, that's a lot of problems to deal with, one at a time.
In time it will sort itself out, but in the meantime the rooms are full of smoke

ETL Failure Due to Failure of a Task

Hi All,
I am getting ETL failure due to failure of a task, sporadically. Also, when i re-run the ETL, the ETL completed successfully.
I have copied the informatica session log file.
DIRECTOR> VAR_27027 Use default value [0] for user-defined workflow/worklet variable:[$$passInStatus].
DIRECTOR> VAR_27028 Use override value [DataWarehouse] for session parameter:[$DBConnection_OLAP].
DIRECTOR> VAR_27028 Use override value [SEBL_80] for session parameter:[$DBConnection_OLTP].
DIRECTOR> VAR_27028 Use override value [1] for mapping parameter:[$$DATASOURCE_NUM_ID].
DIRECTOR> VAR_27028 Use override value [] for mapping parameter:[$$Hint1].
DIRECTOR> VAR_27028 Use override value [] for mapping parameter:[$$Hint2].
DIRECTOR> TM_6014 Initializing session [VisibilityActivityParty_Full] at [Wed Aug 17 00:31:31 2011]
DIRECTOR> TM_6683 Repository Name: [Oracle_BI_DW_Base]
DIRECTOR> TM_6684 Server Name: [Oracle_BI_DW_Base_Integration_Service]
DIRECTOR> TM_6686 Folder: [SDE_SBL_80_Adaptor]
DIRECTOR> TM_6685 Workflow: [VisibilityActivityParty_Full]
DIRECTOR> TM_6101 Mapping name: VisibilityActivityParty [version 1]
DIRECTOR> TM_6827 [D:\Informatica\PowerCenter8.1.1\server\infa_shared\Storage] will be used as storage directory for session [VisibilityActivityParty_Full].
DIRECTOR> CMN_1802 Session recovery cache initialization is complete.
DIRECTOR> TM_6703 Session [VisibilityActivityParty_Full] is run by 32-bit Integration Service [node01_sb8anaprd], version [8.1.1 SP5], build [0822].
MANAGER> PETL_24058 Running Partition Group [1].
MANAGER> PETL_24000 Parallel Pipeline Engine initializing.
MANAGER> PETL_24001 Parallel Pipeline Engine running.
MANAGER> PETL_24003 Initializing session run.
MAPPING> CMN_1569 Server Mode: [ASCII]
MAPPING> CMN_1570 Server Code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
MAPPING> TM_6151 Session Sort Order: [Binary]
MAPPING> TM_6156 Using LOW precision decimal arithmetic
MAPPING> TM_6180 Deadlock retry logic will not be implemented.
MAPPING> TM_6307 DTM Error Log Disabled.
MAPPING> TE_7022 TShmWriter: Initialized
MAPPING> DBG_21075 Connecting to database [obieeprd], user [OLAP]
MAPPING> DBG_21474 Warning: Update Strategy transform [UPDTRANS] is disabled. Set session type to [Data Driven] to enable it.
MAPPING> TM_6007 DTM initialized successfully for session [VisibilityActivityParty_Full]
DIRECTOR> PETL_24033 All DTM Connection Info: [<NONE>].
MANAGER> PETL_24004 Starting pre-session tasks. : (Wed Aug 17 00:31:31 2011)
MANAGER> PETL_24027 Pre-session task completed successfully. : (Wed Aug 17 00:31:31 2011)
DIRECTOR> PETL_24006 Starting data movement.
MAPPING> TM_6660 Total Buffer Pool size is 36000000 bytes and Block size is 65536 bytes.
READER_1_1_1> DBG_21438 Reader: Source is [SB8PRD], user [SIEBEL]
READER_1_1_1> BLKR_16003 Initialization completed successfully.
WRITER_1_*_1> WRT_8146 Writer: Target is database [obieeprd], user [OLAP], bulk mode [ON]
WRITER_1_*_1> WRT_8106 Warning! Bulk Mode session - recovery is not guaranteed.
WRITER_1_*_1> WRT_8397 Appending output data to file [D:\Informatica\PowerCenter8.1.1\server\infa_shared\BadFiles\w_act_party.bad] (initial size [717]).
WRITER_1_*_1> WRT_8124 Target Table W_ACT_PARTY :SQL INSERT statement:
INSERT INTO W_ACT_PARTY(INTEGRATION_ID,DATASOURCE_NUM_ID,ETL_PROC_WID,TABLE_WID,ACTIVITY_ID,PARTY_ID) VALUES ( ?, ?, ?, ?, ?, ?)
WRITER_1_*_1> WRT_8124 Target Table W_ACT_PARTY :SQL UPDATE statement:
UPDATE W_ACT_PARTY SET ETL_PROC_WID = ?, ACTIVITY_ID = ?, PARTY_ID = ? WHERE INTEGRATION_ID = ? AND DATASOURCE_NUM_ID = ? AND TABLE_WID = ?
WRITER_1_*_1> WRT_8124 Target Table W_ACT_PARTY :SQL DELETE statement:
DELETE FROM W_ACT_PARTY WHERE INTEGRATION_ID = ? AND DATASOURCE_NUM_ID = ? AND TABLE_WID = ?
WRITER_1_*_1> WRT_8270 Target connection group #1 consists of target(s) [W_ACT_PARTY]
WRITER_1_*_1> WRT_8003 Writer initialization complete.
READER_1_1_1> BLKR_16007 Reader run started.
READER_1_1_1> RR_4029 SQ Instance [SQ_S_ACT_EMP] User specified SQL Query [SELECT
     AEMP.ROW_ID,
     AEMP.ACTIVITY_ID,
     U.PAR_ROW_ID
FROM
     V_ACT_EMP AEMP,
     S_USER U
WHERE
     AEMP.EMP_ID = U.ROW_ID]
READER_1_1_1> RR_4049 SQL Query issued to database : (Wed Aug 17 00:31:32 2011)
WRITER_1_*_1> WRT_8005 Writer run started.
WRITER_1_*_1> WRT_8158
*****START LOAD SESSION*****
Load Start Time: Wed Aug 17 00:31:32 2011
Target tables:
W_ACT_PARTY
READER_1_1_1> RR_4050 First row returned from database to reader : (Wed Aug 17 00:31:32 2011)
LKPDP_1> DBG_21097 Lookup Transformation [LKP_W_ACT_PARTY]: Default sql to create lookup cache: SELECT ETL_PROC_WID,INTEGRATION_ID,TABLE_WID,DATASOURCE_NUM_ID FROM W_ACT_PARTY ORDER BY INTEGRATION_ID,TABLE_WID,DATASOURCE_NUM_ID,ETL_PROC_WID
LKPDP_1> TE_7212 Increasing [Index Cache] size for transformation [LKP_W_ACT_PARTY] from [1048576] to [1050000].
LKPDP_1> TM_6660 Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
LKPDP_1:READER_1_1> DBG_21438 Reader: Source is [obieeprd], user [OLAP]
LKPDP_1:READER_1_1> BLKR_16003 Initialization completed successfully.
LKPDP_1:READER_1_1> BLKR_16007 Reader run started.
LKPDP_1:READER_1_1> RR_4049 SQL Query issued to database : (Wed Aug 17 00:31:32 2011)
LKPDP_1:READER_1_1> BLKR_16019 Read [0] rows, read [0] error rows for source table [LKP_W_ACT_PARTY{{DSQ}}] instance name [LKP_W_ACT_PARTY{{SRC}}]
LKPDP_1:READER_1_1> BLKR_16008 Reader run completed.
LKPDP_1:TRANSF_1_1> DBG_21682 Lookup table row count : 0
LKPDP_1:TRANSF_1_1> DBG_21297 Lookup cache row count : 0
LKPDP_1:TRANSF_1_1> DBG_21294 Lookup cache creation completed : (Wed Aug 17 00:31:32 2011)
LKPDP_1:TRANSF_1_1> CMN_1671 Created new cache files PMLKUP12190_9W32.[dat/idx] in directory D:\Informatica\PowerCenter8.1.1\server\infa_shared\Cache for Lookup [LKP_W_ACT_PARTY].
LKPDP_1:TRANSF_1_1> DBG_21641 LKP_W_ACT_PARTY: Index cache size = [1050000], Data cache size = [2097152]
LKPDP_1:TRANSF_1_1> DBG_21216 Finished transformations for Source Qualifier [LKP_W_ACT_PARTY{{DSQ}}]. Total errors [0]
TRANSF_1_1_1> CMN_1079 WARNING: Lookup table contains no data.
TRANSF_1_1_1> DBG_21524 Transform : LKP_W_ACT_PARTY
TRANSF_1_1_1> DBG_21313 Lookup table : W_ACT_PARTY
TRANSF_1_1_1> DBG_21562 WARNING : Output rows from LKP_W_ACT_PARTY will be the default port value
LKPDP_2> DBG_21097 Lookup Transformation [LKP_ETL_PROC_WID]: Default sql to create lookup cache: SELECT ETL_PROC_WID,ROW_WID FROM W_PARAM_G ORDER BY ROW_WID,ETL_PROC_WID
LKPDP_2> TE_7212 Increasing [Index Cache] size for transformation [LKP_ETL_PROC_WID] from [1048576] to [1050000].
LKPDP_2> TM_6660 Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
LKPDP_2:READER_1_1> DBG_21438 Reader: Source is [obieeprd], user [OLAP]
LKPDP_2:READER_1_1> BLKR_16003 Initialization completed successfully.
LKPDP_2:READER_1_1> BLKR_16007 Reader run started.
LKPDP_2:READER_1_1> RR_4049 SQL Query issued to database : (Wed Aug 17 00:31:32 2011)
LKPDP_2:READER_1_1> BLKR_16019 Read [0] rows, read [0] error rows for source table [LKP_ETL_PROC_WID{{DSQ}}] instance name [LKP_ETL_PROC_WID{{SRC}}]
LKPDP_2:READER_1_1> BLKR_16008 Reader run completed.
LKPDP_2:TRANSF_1_1> DBG_21682 Lookup table row count : 0
LKPDP_2:TRANSF_1_1> DBG_21297 Lookup cache row count : 0
LKPDP_2:TRANSF_1_1> DBG_21294 Lookup cache creation completed : (Wed Aug 17 00:31:32 2011)
LKPDP_2:TRANSF_1_1> CMN_1671 Created new cache files PMLKUP12190_10W32.[dat/idx] in directory D:\Informatica\PowerCenter8.1.1\server\infa_shared\Cache for Lookup [LKP_ETL_PROC_WID].
LKPDP_2:TRANSF_1_1> DBG_21641 LKP_ETL_PROC_WID: Index cache size = [1050000], Data cache size = [2097152]
LKPDP_2:TRANSF_1_1> DBG_21216 Finished transformations for Source Qualifier [LKP_ETL_PROC_WID{{DSQ}}]. Total errors [0]
TRANSF_1_1_1> CMN_1079 WARNING: Lookup table contains no data.
TRANSF_1_1_1> DBG_21524 Transform : LKP_ETL_PROC_WID1
TRANSF_1_1_1> DBG_21313 Lookup table : W_PARAM_G
TRANSF_1_1_1> DBG_21562 WARNING : Output rows from LKP_ETL_PROC_WID1 will be the default port value
WRITER_1_*_1> WRT_8167 Start loading table [W_ACT_PARTY] at: Wed Aug 17 00:31:32 2011
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> WRT_8229 Database errors occurred:
ORA-01400: cannot insert NULL into (ETL_PROC_WID)
Database driver error...
Function Name : Execute Multiple
SQL Stmt : INSERT INTO W_ACT_PARTY(INTEGRATION_ID,DATASOURCE_NUM_ID,ETL_PROC_WID,TABLE_WID,ACTIVITY_ID,PARTY_ID) VALUES ( ?, ?, ?, ?, ?, ?)
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> WRT_8425 ERROR: Writer execution failed.
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> WRT_8114
Row # [1] in bad file
WRITER_1_*_1> CMN_1053 : Rowdata: ( RowType=0(insert) Src Rowid=1 Targ Rowid=1
INTEGRATION_ID (INTEGRATION_ID:Char.30:): "1-B8THY"
DATASOURCE_NUM_ID (DATASOURCE_NUM_ID:Double:): "1.000000000000000"
ETL_PROC_WID (ETL_PROC_WID:Double:): "(NULL)"
TABLE_WID (TABLE_WID:Double:): "68.00000000000000"
ACTIVITY_ID (ACTIVITY_ID:Char.15:): "1-N8FBX"
PARTY_ID (PARTY_ID:Char.15:): "0-1"
WRITER_1_*_1> WRT_8164 Error loading into target [W_ACT_PARTY] : Bad rows exceeded Session Threshold [1]
WRITER_1_*_1> WRT_8333 Rolling back all the targets due to fatal session error.
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> CMN_1022 Database driver error...
CMN_1022 [
ORA-24795: Illegal ROLLBACK attempt made
Database driver error...
Function Name : Commit
Database driver error...
Function Name : Rollback]
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> WRT_8183 Rollback failed for the target [W_ACT_PARTY]
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> WRT_8080 Writer run terminated. [Error loading data and error threshold reached]
WRITER_1_*_1> WRT_8168 End loading table [W_ACT_PARTY] at: Wed Aug 17 00:31:32 2011
WRITER_1_*_1> WRT_8035 Load complete time: Wed Aug 17 00:31:32 2011
LOAD SUMMARY
============
WRT_8036 Target: W_ACT_PARTY (Instance Name: [W_ACT_PARTY])
WRT_8038 Inserted rows - Requested: 488 Applied: 0 Rejected: 1 Affected: 0
WRITER_1__1> WRT_8043 ****END LOAD SESSION*****
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [W_ACT_PARTY] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [UPDTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [UPDTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [FILTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [FILTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [LKP_ETL_PROC_WID] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [LKP_ETL_PROC_WID] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [EXPTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [EXPTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [SQ_S_ACT_EMP] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [SQ_S_ACT_EMP] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [SQ_S_ACT_EMP] encountered fatal error. Terminating session.
TRANSF_1_1_1> DBG_21511 TE: Fatal Transformation Error.
MANAGER> PETL_24031
***** RUN INFO FOR TGT LOAD ORDER GROUP [1], CONCURRENT SET [1] *****
Thread [READER_1_1_1] created for [the read stage] of partition point [SQ_S_ACT_EMP] has completed: Total Run Time = [0.656254] secs, Total Idle Time = [0.390627] secs, Busy Percentage = [40.476246].
Thread [TRANSF_1_1_1] created for [the transformation stage] of partition point [SQ_S_ACT_EMP] has completed: Total Run Time = [0.562504] secs, Total Idle Time = [0.406252] secs, Busy Percentage = [27.777928].
Thread [WRITER_1_*_1] created for [the write stage] of partition point [W_ACT_PARTY] has completed. The total run time was insufficient for any meaningful statistics.
MANAGER> PETL_24005 Starting post-session tasks. : (Wed Aug 17 00:31:33 2011)
MANAGER> PETL_24029 Post-session task completed successfully. : (Wed Aug 17 00:31:33 2011)
MAPPING> TE_7216 Deleting cache files [PMLKUP12190_9W32] for transformation [LKP_W_ACT_PARTY].
MAPPING> TE_7216 Deleting cache files [PMLKUP12190_10W32] for transformation [LKP_ETL_PROC_WID].
MAPPING> TM_6018 Session [VisibilityActivityParty_Full] run completed with [0] row transformation errors.
MANAGER> PETL_24002 Parallel Pipeline Engine finished.
DIRECTOR> PETL_24013 Session run completed with failure.
DIRECTOR> TM_6022
SESSION LOAD SUMMARY
================================================
DIRECTOR> TM_6252 Source Load Summary.
DIRECTOR> CMN_1740 Table: [SQ_S_ACT_EMP] (Instance Name: [SQ_S_ACT_EMP])
     Output Rows [50592], Affected Rows [50592], Applied Rows [50592], Rejected Rows [0]
DIRECTOR> TM_6253 Target Load Summary.
DIRECTOR> CMN_1740 Table: [W_ACT_PARTY] (Instance Name: [W_ACT_PARTY])
     Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [1]
DIRECTOR> TM_6023
===================================================
DIRECTOR> TM_6020 Session [VisibilityActivityParty_Full] completed at [Wed Aug 17 00:31:33 2011]
Can some one help me to debug the issue please ?
Thanks

Hi Nat,
Thanks a lot for your response.
I am running this ETL task from DAC. This task is a part of Daily Full load ETL. As i mentioned earlier, this task fails sporadically and failing till now. After restarting the ETL, it gets completed.
Please let me know if you have any question.
Thanks,
Neeraj

Logon failure due to an internal error-webi client tool

Hi experts,
I've installed WebI client tool 4.0, when I trying to logon this message appear: Logon failure due to an internal error,
this problem has been addressed before, but could not be resolved [http://forums.sdn.sap.com/thread.jspa?messageID=10751144#10751144|http://forums.sdn.sap.com/thread.jspa?messageID=10751144#10751144]
there is a way to solve this problem?
regards,
Jonathan.

In a Unix environment the version is in the file “AddorRemoveProduct.sh” located in the installation folder of BI4.x
For the updated reference table of the versions / builds and corresponding patch levels, please see KB article # 1602088
BI 4.0 RTM
14.0.0.760
Patch 04
14.0.0.904
Patch 05
14.0.0.918
Patch 06
14.0.0.940
Patch 07
14.0.0.954
Patch 08
14.0.0.970
Patch 09
14.0.0.986
Patch 10
14.0.0.996
Support Pack 1
14.0.1.287
Patch 1.1
14.0.1.313
Patch 1.2
14.0.1.330
Patch 1.3
14.0.1.342
Patch 1.4
14.0.1.360
Patch 1.5
14.0.1.375
Patch 1.6
14.0.1.397
Support Pack 2
14.0.2.364
Patch 2.1
14.0.2.388
Patch 2.2
14.0.2.397
Patch 2.3
14.0.2.416
Patch 2.4
14.0.2.439
Patch 2.5
14.0.2.455
Patch 2.6
14.0.2.481
Patch 2.7
14.0.2.508
Patch 2.8
14.0.2.532
Patch 2.9
14.0.2.556
Patch 2.10
14.0.2.565
Patch 2.11
14.0.2.594
Patch 2.12
14.0.2.619
Patch 2.13
14.0.2.641
Patch 2.14
14.0.2.657
Patch 2.15
14.0.2.682
Patch 2.16
14.0.2.703
Feature Pack 3
14.0.3.613
Patch 3.1
14.0.3.630
Patch 3.2
14.0.3.657
Patch 3.3
14.0.3.678
Patch 3.4
14.0.3.691
Please note that at today FP03 is in RampUp

Logon failure due to an internal error

Hi,
We have installed XI 3.1 SP3 (plus fixpacks) on a server and I am trying to access Web Intelligence on the client machine. I get the error "Logon failure due to an internal error." Any ideas what the problem may be?
I can login into Web Intelligence when on the server directly using remote desktop. I am on SP3 on the client machine but may not be on the same level for fixpacks - will check. Could that be the problem?
I can access the CMC from the client machine.
Thanks

Hi All,
I'll start by describing the basic logon connections made by all the client tools when connecting to a Business Objects CMS. From this hopefully it will help resolve the kind of issues described here.
------------------Background------------------
The CMS has a port number (6400). This port number is actually the port number of the name server. This name server stores the name, type of server, hostname and port for all the BusinessObjects servers that exist in the cluster. Whenever a program (such as a client tool) needs to know how to connect to a particular server, the name server will reply with the hostname (or IP) and port number to connect to. When each Business Objects server process starts it will register with the name server and tell it what its connection info (hostname and port) are.
In the case of a client logon it will first connect to the name server and then request the information to connect to the CMS service - (note that the name server and the CMS service are two logicial and seperate functions that the CMS process performs). The CMS service actually runs on the request port of the CMS.
------------------Cause of Logon Failures------------------
If you have no explicitly configured it, the hostname returned for connection could be the fully qualified name OR the short hostname of the machine and the port number will be random (and change each time the process is started). The client ALSO needs to be able to connect to the hostname and port returned by the name server to continue processing. If it can't then you will receive a logon error - in designer/desktop intelligence this will appear as a 'Transport Communication Error' in the deatils of the error message.
------------------Example------------------
You initially connect to boeserver.mycomp.com:6400. boeserver.mycomp.com is a DNS name that the client computer can resolve and the port 6400 is open through the firewall. The client connects to the name server (within the CMS process) and requests the connection information for the CMS services but these have not been explicitly set in the CMC->Server->CMS->Properties page.
The response from the nameserver might be to connect to the short name of the host: boeserver on port 54393 (or some other random port number). You will get a logon error if EITHER the hostname boeserver cannot be resolved (which can be quite common when the boeserver machine is in a different subnet) OR there is a firewall blocking the connection port (54393 in this case).
------------------Resolution------------------
Go to the CMC->Server->CMS->Properties page. Here there is a section where you can specify the hostname with with each business objects server will give as the hostname (or IP address) and port (request port) that it can be contacted on. In the example below I have said that it should be contacted on the fullyqualified name and on port 6401. Again 6401 would need to be open through the firewall.
No two servers can have the same request port. As you can see in the screenshot I have specified to connect to the CMS service on 6401 using the fullyqualified hostname boeserver.mycomp.com and finally that the name server port is the default 6400.
As mentioned previously there may be also other BOE servers that similar settings are required for, depending on the actions you are performing - e.g. IDT and designer need access to the input file repository server to input/export universes, WebiRich Client also should have access to the Output File Repository Server. Client tools should also have access to the Adaptive Processing Server that is running the Client Auditing Proxy Service so that any actions are audited.
One extra thing that can cause a block on the port number, other than a regular corporate firewall is the security on the server machine itself (e.g. the Windows firewall on the server can block incoming requests if there is not an expection created.
Regards,
Graham

Exception Reporting failure due to short dump UNCAUGHT_EXCEPTION

Hi everyone,
Exception Reporting called u201CPO Price Deviationu201D failure due to short dump UNCAUGHT_EXCEPTION.
Need your reply on this urgently.
Thank you,
Prasad

Hi Andrew Zhou,
Actually the Exception reporting step failed because there was no applicable data for the selection criteria mentioned in the BEx report. And the data was stuck in the source system. We got it solved my contacting the R/3 cosultant.
I am giving you points for the response. And I would like to know one thing about RSRT if I select "use aggregates" option for a query it is showing aggregates while debuging even though there are no aggregates created on the Cube.
Thank you

I'm getting this warning,but i dont know where is it located.please let me know,where should i rectify this? WRN: Assembly binding logging is turned OFF. To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!Enab

i'm getting this warning,but i dont know where is it located.please let me know,where should i rectify this?
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].

Hello,
This seems not related to SQL Server but more related to Fusion or a missing DLL. The following resources may help you:
http://blog.mediawhole.com/2010/08/enable-fusion-assembly-binding-logging.html
http://jamesecampbell.blogspot.com/2011/11/how-to-enable-assembly-binding-logging.html
http://www.codeproject.com/Tips/141281/WRN-Asssembly-binding-logging-is-turned-OFF
http://stackoverflow.com/questions/5986930/assembly-binding-logging-is-turned-off
Please verify if a missing DLL is specified before the "WRN: Assembly binding logging is turned OFF" message.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

LDAP Bind Failure: Can't contact LDAP server in Presentation Server

I have configured LDAP configuration in the RPD and am able to connect to the LDAP from the BI server. Its returning the information i need when i test through the admin tool. But when i try to log in from the PS using the same network id and password, it gives me the below error:
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused. [53003] LDAP bind failure: Can't contact LDAP server. (08004).
I know for sure, the network connectivity is working as i get my results back from the BI Server. Please advise, if i need to change other configurations on the Presentation end. As my network folks have run out of ideas. Thx!

user9125812 wrote:
Yes, i am pinging from OBIEE Server through the RPD and i am successful.Pinging the OBIEE Server through the RPD? Ping is a DOS command, how can oyu "ping through the RPD".
Can you go to the server, open a CMD windows and do "ping nsldap.companyname.com" and see if it works. If it works it could be that the LDAP port is blocked by a firewall or OBIEE is not able to make a connection. Make sure you are using the correct port as well. Install an LDAP client in your OBIEE Server and test that you can connect to your LDAP server from your OBIEE Server, not from the RPD. You can use this:
http://jxplorer.org/

LDAP client binding failure stops TimerTask thread

Hi There,
I try to schedule a TimerTask once ldap binding fails, but the binding failure prevents the TimerTask thread to start. Any idea? or any work around?
Thanks.
try{
ctx = new InitialLdapContext(envs[ctx_idx], null);
}catch(NamingException ne){
START();
public static void start() {
timer = new Timer();
timer.schedule(new TimerTask() {
public void run(){
System.out.println(".... Visit moniter ....");
}, 10, 1000) ;
} // end of start
...

Problem Fixed. Windows XP client did not have WINS server IP address is TCP/IP properties.

LDAP Bind Failure

Hi All,
We are facing the issue "LDAP bind failure:Cant contact LDAP server".
We are facing for now and then....Can you guys tell me the corrective action to correct this?
Our LDAP server is Novel e-directory.
RMD

Try referring http://rnm1978.wordpress.com/2010/12/02/troubleshooting-obiee-ldap-adsi-authentication/
Hope it helps

Write Failure due to packet loss

Hi All,
Is it possible to occur a cache put failure due to packet loss. The below JMX report log (network-health-detail.txt) shows that TX success as 0.9999 for NodeId(8 PROXY node) and RxSuccess shows 0.9999 (node id 9 which is a STORAGE) exactly the same time.
At the same time I have inserted a cache item which went missing in the cache.
Is it possible to correlate the cache loss with the below data.
Please correct me if my understanding is work. Really looking forward for some expert look at this.
Regards
Srinivas
Batch Counter Report Time RefreshTime Node Id Tx Success Rx Success PacketsSent Current Packets Sent PacketsResent Current Packet Resent PacketsRepeated Current Repeated PacketsReceived Current Packets Received
24962 Thu May 05 15:54:37 BST 2011 Thu May 05 15:54:37 BST 2011 8 0.9999806938625789 1.0 116249593 51797.0 20 1.0 179 0.0 479093147 107230.0
24962 Thu May 05 15:54:37 BST 2011 Thu May 05 15:54:37 BST 2011 9 1.0 0.9999898626387551 110148867 169211.0 118 0.0 61.0 55759817 98645.0

It is more likely that you had other issues that caused your data to go "missing". Lost packets would be resent anyway so should get there eventually. The success rates of 0.9999 would be fine, you would be lucky to get a success rate of 1.0 all the time unless your cluster was not doing much.
When you say the data goes "missing" what do you mean. Presumably you do a put to get data into the cache, how to you try to get it back - a get or a query using a Filter.
What classes are you using for the keys - this can be important and can affect whether your cache works as you expect it to.
JK

Software updates (4.1.B.0.431) failure due to WIFI (internet) Disconnection

Software updates failure due to WIFI (internet) Disconnection
After connecting the Phone to PC, tried to update software (4.1.B.0.431) using “Sony Pc companion” software,
during software update process WiFi stopped working and internet connection is lost (due to power went) ,
when internet connection established again ,tried to update software again
error popup appeared please refer images error1 .bmp and error2.bmp
Set up:
Phone: Sony Ericssion Xperi Mini Pro (SK 17)
PC OS: Windows 7 (64 bit)
Internet connectivity: WiFi with speed of 512KBPS

try SUS
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
Don't forget to mark the Correct Answers & Helpful Answers
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

[svn:osmf:] 13558: Fixing element removal failure due to ParallelDisplayObject trait not being able to resolve media element from view trait .

Revision: 13558
Revision: 13558
Author:   [email protected]
Date:     2010-01-17 10:18:44 -0800 (Sun, 17 Jan 2010)
Log Message:
Fixing element removal failure due to ParallelDisplayObject trait not being able to resolve media element from view trait. Extended TraitAggregatorEvent to include to media element so resolving is no longer required.
Modified Paths:
    osmf/trunk/framework/MediaFramework/org/osmf/composition/ParallelDisplayObjectTrait.as
    osmf/trunk/framework/MediaFramework/org/osmf/composition/TraitAggregationHelper.as
    osmf/trunk/framework/MediaFramework/org/osmf/composition/TraitAggregator.as
    osmf/trunk/framework/MediaFramework/org/osmf/composition/TraitAggregatorEvent.as

Laptop keeps on rebooting after windows update configuration failure due to low disk space.

Dear all,
My laptop keeps on restarting it self due to it cannot configure the windows update. I had tried all the solutions online including boot into safe mode, however none of this works as it keeps on going back to the windows configuration screen. I had no windows
installation disc, i tried system repair and system restore, both also not working.
I know where my problems is, it is that I had turn on the quota management system in my c drive. Thus, it had limited my disk space. I suspect that the configuration failure is due to not enough disk space.
I am here to ask, anywhere i can start my windows without the update configuration step, or how did i turn off my quota management system without getting into the windows. I tried safe mode, it still goes to the windows configuration screen and reboots
again.
Please help, thanks.

Hi,
You can access Advanced Boot Options by turning on your computer and pressing the F8 key before Windows starts.
Then choose system restore to go back to a previous status if you have a restore point.
Advanced startup options (including safe mode)
http://windows.microsoft.com/en-in/windows/advanced-startup-options-including-safe-mode#1TC=windows-7
Alex Zhao
TechNet Community Support

Backup failure due to Character set problem

Hi,
I am manually running a COLD backup script in Windows NT environment and all the logs has been captured below:
Recovery Manager: Release 8.1.6.0.0 - Production
RMAN-06005: connected to target database: db1 (DBID=754030292)
RMAN-06009: using target database controlfile instead of recovery catalog
RMAN> shutdown immediate;
2> startup mount;
3> RUN {
4> ALLOCATE CHANNEL disk1 TYPE disk;
5> BACKUP DATABASE TAG 'db1_db_full' FORMAT 'e:\backup\db1\db1_backup';
6> copy current controlfile to 'e:\backup\db1\Control_db1.ctl';
7> }
8>
RMAN-06405: database closed
RMAN-06404: database dismounted
RMAN-06402: Oracle instance shut down
RMAN-06193: connected to target database (not started)
RMAN-06196: Oracle instance started
RMAN-06199: database mounted
Total System Global Area 934143244 bytes
Fixed Size 70924 bytes
Variable Size 260554752 bytes
Database Buffers 673439744 bytes
Redo Buffers 77824 bytes
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-08030: allocated channel: disk1
RMAN-08500: channel disk1: sid=13 devtype=DISK
RMAN-03022: compiling command: backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure during compilation of command
RMAN-03013: command type: backup
RMAN-06003: ORACLE error from target database: ORA-06550: line 1, column 166:
PLS-00553: character set name is not recognized
ORA-06550: line 0, column 0:
PL/SQL: Compilation unit analysis terminated
RMAN-06031: could not translate database keyword
Recovery Manager complete.
As the above log shown, I cannot do any backup command in the RUN bracket and it complains that the character set is not recognized.
This set of error happens when I have create six other Oracle databases in my NT box. Before that, I can manually run the backup with no problem and a backupset has been generated.
If you have come across this problem and have solutions of it. That will be great.
Thanks !!
null

kk001 wrote:
Hi ,
The export Backup failing due to character set problem
. . exporting table ravidlx
EXP-00008: ORACLE error 6552 encountered
ORA-06552: PL/SQL: Compilation unit analysis terminated
ORA-06553: PLS-553: character set name is not recognized
P
Please suggest how to set character set
I don't know what you have.
I don't know what you do.
I don't know what you see.
It is really, Really, REALLY difficult to fix a problem that can not be seen.
use COPY & PASTE so we can see what you do & how Oracle responds.
do as below so we can know complete Oracle version & OS name.
Post via COPY & PASTE complete results of
SELECT * from v$version;

BIND Failure due to ACL

Similar Messages

Maybe you are looking for