Binding dropped error messages in the log, UNABLE TO USE BT

Hey,
So I have an extreme n, and bit torrent will not connect to peers seeding. They will connect for 2 seconds then disconnect. i have ports configured correctly 9090 forwarded in the extreme too
but
the log is filled with
Binding dropped from ip xx.xxx.x.xx to (my ip)

Do you get similar errors when running a ColumnList query without providing a Table name (with the Group parameter)?
/XMII/Illuminator?Server=XXXXX&Mode=ColumnList
/XMII/Illuminator?Server=XXXXX&Mode=ColumnList&Group=TABLENAME
Just a guess, but perhaps the WB is trying to fill the lower left listbox of available columns without the benefit of a table name being selected from the upper left listbox of available tables.
Regards,
Jeremy

Similar Messages

ISA550 After upgrade 1.2.17 many error messages in the log

Hi,
After upgrade> 1.2.17 many error messages in the log
Hello,
after upgrading from 1.2.15> 1.2.17 have infinitely many errors in the log:
Err - System: sdsd: msgq_open: Error: mq_open () failed on msg queue / sdsd, errno = 2
Err - System: sdsd: open_control_msgq: Failed to open sdsd control message queue, errno = 2 (No such file or directory)
These errors occur repeatedly (300 times per minute). So I went back to the FW 1.2.15.
Does anyone have an idea?
Thanks and regards
Claus

Hi John,
Has this issue been resolved yet ?
I'm facing the same issue after upgrading to 1.2.18
11/11/2013 10:42    Error    System    sdsd: msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
11/10/2013 12:42    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 12:42    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/10/2013 12:42    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/10/2013 0:22    Error    System    sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 0:22    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
11/10/2013 0:22    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/9/2013 18:43    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/9/2013 18:43    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/9/2013 18:43    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
Please let me know how to make this go away.
What are these errors about anyway ?? What causing it ??
Thanks
Lutfi
2013-11-11 10:42:29
Error
System
sdsd: msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
2013-11-10 12:42:59
Error
System
sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
2013-11-10 12:42:59
Error
System
sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
2013-11-10 12:42:58
Error
System
sdsd: tcp_connect: Couldn't connect socket, errno = 110
2013-11-10 00:22:57
Error
System
sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
2013-11-10 00:22:57
Error
System
sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
2013-11-10 00:22:56
Error
System
sdsd: tcp_connect: Couldn't connect socket, errno = 110
2013-11-09 18:43:17
Error
System
sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
2013-11-09 18:43:16
Error
System
sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
2013-11-09 18:43:16
Error
System
sdsd: tcp_connect: Couldn't connect socket, errno = 11011/11/2013 10:42    Error    System    sdsd: msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
11/10/2013 12:42    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 12:42    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/10/2013 12:42    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/10/2013 0:22    Error    System    sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 0:22    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
11/10/2013 0:22    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/9/2013 18:43    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/9/2013 18:43    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/9/2013 18:43    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 1

After updating to iTunes 5, I got an error message said the iPhone cannot be used because the Apple Moble Device service is not started. Any idea why and how to fix this? Thanks!

After updating to iTunes 5, I got an error message said the iPhone cannot be used because the Apple Moble Device service is not started. Any idea why and how to fix this? Thanks!

Please follow this article:
http://support.apple.com/kb/TS1567
it should help
let me know

Error Messages in NW Log: Unable to run query / Enter table name

Hi all,
I am always wondering about the tons of error messages in the NW log.
Today I opened the workbench and a query (SQL-Query, Mode Fixed Query) and viewed the Fixed Query Details. Then I looked into the NW Log (SAP Logs), and it contained the following errors from my query opening inside the workbench:
com.sap.xmii.Illuminator.logging.LHException:
com.sap.xmii.Illuminator.logging.LHException:
com.sap.xmii.Illuminator.logging.LHException:
Enter a table name
Unable to run the query
All in all 15 error entries have been generated. Unfortunately no more details are contained in the log.
Has anyone an idea why this happens when only opening a query inside the workbench without starting it?
Michael

Do you get similar errors when running a ColumnList query without providing a Table name (with the Group parameter)?
/XMII/Illuminator?Server=XXXXX&Mode=ColumnList
/XMII/Illuminator?Server=XXXXX&Mode=ColumnList&Group=TABLENAME
Just a guess, but perhaps the WB is trying to fill the lower left listbox of available columns without the benefit of a table name being selected from the upper left listbox of available tables.
Regards,
Jeremy

Error message in the log file

Hi,
I'm running CF 7.0.2. The app is using Flash forms.
I have this onError function in my Application.cfc.
<cffunction name="onError">
<cfargument name="Except" required="yes">
<cfargument name="EventName" type="string"
required="yes">
<cflog file="#This.Name#" type="error" text="Event Name:
#EventName#" time="yes">
<cflog file="#This.Name#" type="error" text="Messsage:
#except.message#" time="yes">
<cflocation url="errorPage.cfm" addtoken="no">
<cfabort>
</cffunction>
The app is working fine but my log file is full of errors:
Event Name: onRequestStart
Messsage: Event Handler Exception
Any idea what's wrong?
Is there any way to get more specific error message?
Thanks,
b.

I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

Frequent postfix "master exit time has arrived" error messages in the log

I'm seeing this in my mail.log every minute:
Dec 1 12:27:46 Executor postfix/master[6394]: master exit time has arrived
Dec 1 12:27:46 Executor postfix/master[6399]: daemon started -- version 2.5.5, configuration /etc/postfix
Dec 1 12:28:46 Executor postfix/master[6399]: master exit time has arrived
Dec 1 12:28:46 Executor postfix/master[6406]: daemon started -- version 2.5.5, configuration /etc/postfix
Dec 1 12:29:46 Executor postfix/master[6406]: master exit time has arrived
Dec 1 12:29:46 Executor postfix/master[6409]: daemon started -- version 2.5.5, configuration /etc/postfix
This does not seem to be normal behavior. Is something misconfigured here? How can I fix this?

just experienced this and found your thread while looking for an answer.
do you have any thing in /var/spool/postfix/maildrop ? if there is something there, then launchd will keep launching postfix.
(ls /var/spool/postfix/maildrop)
i had a file there, and the permissions were wrong for it to process. so it kept launching, but never was able to clear the folder.
i did a chmod 775 on that document ( something like: sudo chmod 755 /var/spool/postfix/maildrop/* ), and that has fixed it after years of issues.
i'm not sure it's the best answer, but worked for me.
Message was edited by: neuralstatic
btw, i had tried to disable the launchd entry for it, but that was no help.

Error Message on the Log in screen

Hi
Why the following message appears as soon as I enter the username and password for login in to SAP B1.
The message is :
"Module<Software Development Kit - Development Version> expired on <20080325>"
How to get rid of this message?
Thanks
SV Reddy

Hi,
Your Software Development kit - Development Version validation date may got expired.
Normally, We will get license for SAP B1. Along with SAP B1 Licenses (Professional User license) we will get license for SAP Addons, Compatibility License for Addons, Software Development Kit - Development Version or Implementation version and SDK Tools Licenses.
Goto Administration --> License --> License Administration --> Components Tab.
You can view the License details with their Expiration date particulars. In this you click the Software Development Kit - Development Version in list. You will view the related informations on right side.
To solve this problem, Renew the License of SAP with the help of your Implementation partner. They will download the license and upgrade your SAP License. Atpresent SAP has provided the license validation till 31.12.2099.
I hope this could help you.
Raja.S

How to display the error message during the web dynpro application runtime

hi,
    I'm a java developer,During i 'deploy and run ' a web dynpro application on server-1,if the application have some runtime errors. there are displayed many infomation about the runtime error,such as exception track,etc.
    But when i do the same on server-2,there just show something like:
            500   Internal Server Error
                                SAP NetWeaver Application Server 7.00/Java AS 7.00
            Failed to process request. Please contact your system administrator.
but the server-1 will stop the j2ee engine.
how can do i make server-2 show detail error message as server-1. when i debug web dynpro application need these infomation.
Appreciate your inputs...
(Note:server-1 and server-2 have same software version)
Edited by: BingLin Zhong on Feb 18, 2008 2:13 AM

The Sap-Notes 962319:
1. Check in the Visual Administrator, "Licensing Adapter" -> "General" -> "SystemType" !
If it is set to "DEVELOPMENT_MODE", verbose error messages are shown.
If it is undefined, proceed with the next step.
If it is set to something else, only exception IDs are shown. In this case the only chance is to search for this exception ID in the default traces.
2. If the system type is undefined, then in the Config Tool "Configurations" -> "webdynpro" -> "sap.com" -> "tcwddispwda" -> "Propertysheet default" -> "DevelopmentMode" is evaluated. If it is "true", verbose error messages are shown.
3. If verbose error messages are required but still the short version is shown, you probably face an error message that is not raised by Web Dynpro but by other components of the NetWeaver. In the Visual Administrator set "Properties" -> "HTTP Provider" -> "DetailedErrorResponse" to "true".
4. In addition to the error page shown in the browser or client, important messages - including error messages and stack traces - are written to the log and trace files, e.g. to the default traces usr\sap\<SID>\<instance>\j2ee\cluster\server<number>\log\defaulttrace.trc.<number>.
a) In some cases, when an exception ID is included in the error message, the detailed error message can easily be retrieved in the log file.
b) When no exception ID is given, you have to search for the detailed error message in the log specifying time stamp and/or user ID.
Always consider restarting the system after making changes on the settings.
It is not recommended to switch the "SystemType" to an inappropriate value just for viewing verbose error messages. The system type potentially affects framework, applications and licensing in an perhaps unintended way.
In the past there was no distinction between different system types regarding error messages. For security reasons this distiction has been introduced. It is not intended to show stack traces in non-development systems in the future. SAP does not provide workarounds or patches to enable such a behaviour again.

Print a custom Error message in the XML bursting program's log file...

Hi,
I having this requirement, where i need to print a custom error message in the xml bursting program's log file.
Actually i am having a report where i create invoices and then those invoices are emailed to the respective customers, now say if a customer has three contacts and there is only two valid email id's so what happens is bursting will be successful for two contacts whereas the third contact dosen't get any emails. when this happens i need to log a message in the bursting programs log file stating a custom message.
Two things i want to know..
1- Whether is it possible to write into the xml bursting programs log file
2- If yes, then how..
note: it ll be greatly appreciated if the answer is elaborated.
thanks,
Ragul

Hi,
I having this requirement, where i need to print a custom error message in the xml bursting program's log file.
Actually i am having a report where i create invoices and then those invoices are emailed to the respective customers, now say if a customer has three contacts and there is only two valid email id's so what happens is bursting will be successful for two contacts whereas the third contact dosen't get any emails. when this happens i need to log a message in the bursting programs log file stating a custom message.
Two things i want to know..
1- Whether is it possible to write into the xml bursting programs log file
2- If yes, then how..
note: it ll be greatly appreciated if the answer is elaborated.
thanks,
Ragul

How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

I am unable to open a project that I have worked on and saved. I get an error message that the file is damaged and cannot be opened.

I am unable to open a project that I have worked on and saved. I get an error message that the file is damaged and cannot be opened.

Leslie Tanaka
Travel and detours have kept me from following up sooner. If the problem that you wrote about still persists.....
Let us go back over that Adobe document regarding troubleshooting damaged projects.
3. Delete the Application Preferences
Where you able to follow that path and delete the Adobe Premiere Elements Prefs file at the end of the path? And, after you did, did the saved/closed programs still refuse to open? If you could not carry out this procedure, what were the limiting factors that kept you from do
7. Test to see if individual media files are causing the problem.
That is an important one. How far did you get into following the instructions given in the document? If you could not complete the test, what was the major block that prevented you from doing so?
I want to make sure that we have gone through everything in that document and ruled all factors there in or out. If it was a matter of you not understanding the instructions, I am hoping that the above will channel you questions to me so that I can clarify anything that you did not understand in the Adobe document instructions.
I do not recall if I asked previously. Even if you cannot open all your saved/closed projects, can you still open a new project and save/close it? Maybe even reopen it?
Please review and consider.
Thank you.
ATR

ITunes unable to recognize iPod, error message along the lines if "iTunes has detected an iPod but unable to recognise" I have followed all the trouble shooting tips and am still stuck? I am now being told by a friend I need a link sent to me to fix this

Hi,
I am need of help! I have had this issue for a while now and it's becoming frustrating.
My iTunes installed on my HP Windows 8 Netbook is unable to recognize my iPod, the error message along the lines of "iTunes has detected an iPod but unable to recognise"
I have followed all the trouble shooting tips and am still stuck? I am now being told by a friend I need a link sent to me to fix this??
Someone please help me fix this problem.
Many thanks.
Matt.

Hi
So just close iTunes and re-open iTunes thats it and that worked for you?
When you say reset your settings do you mean to factory settings? As my iPod was swapped at the store for a new one and the problem is still there...
Thanks.

When I attempt to sych with I tunes I get the following Error Message. "Itunes was unable to load data class information from synch services. Reconnect or try again later." How do I fix this? This started happening after I updated to the latest version

When I attmpt to synch my Iphone I get the following error message. "Itunes was unable to load data class informationfrom synch services. Reconnect or try again later. This started after I uddated to the latest version of Itunes. What should I do?

My iPods are working fine...this is just on our iPhone 3GSs....friend said his iPhone 4 was working fine with upgrade.
Tried: the winsock reset, uninstall/re-install of iTunes, shut the firewall down. Even called Apple...and after 2 hours of being told that "I'm savvy and have done everything they'd recommend" still with no fix...
Still: Takes over 2 minutes (not hooked up to phone) to open Edit-Preferences-Device...and can't find any backups?!?! Takes over 2 minutes to even open the phone to change spps, musice, books, etc....but won't let me do anything with contacts...wonder if this is what that error message is about (because I don't actually sync to an email program, I've just kept it all on the phone - mistake).
**banging head on table**

Need to find the way to get the actual error message in the alert log.

Hi,
I have configured OEM 11G and monitoring target versions are from 9i to 11g. Now my problem is i have defined the metrics for monitoring the alert log contents and OEM is sending alert if there is any error in the alert log but it is not showing the actual error message just it is showing as below.
============================
Target Name=IDMPRD
Target type=Database Instance
Host=oidmprd01.ho.abc.com
Occurred At=Dec 21, 2011 12:05:21 AM GMT+03:00
Message=1 distinct types of ORA- errors have been found in the alert log.
Metric=Generic Alert Log Error Status
Metric value=1
Severity=Warning
Acknowledged=No
Notification Rule Name=RULE_4_PROD_DATABASES
Notification Rule Owner=SYSMAN
============================
Is there any way to get the complete error details in the OEM alert itself.
Regards
DBA.

You need to look at the Alert Log error messages, not the "status" messages. See doc http://docs.oracle.com/cd/E11857_01/em.111/e16285/oracle_database.htm#autoId2

IPad with retina is stuck on error message that iPad is unable to back up. When hit ok, the message does not go away. Cannot power down. Don't have computer to sync with iTunes. Now what?

My coworker has a fairly new iPad with retina display. She has an error message that the iPad has not been backed up and needs to back up when locked, on wifi, and connected to a power supply. It has an ok button to acknowledge the message. Every time she hits the ok button, the error message remains. She is unable to power down because the error message stays at the top and disables the ability to use any other touch portions of the screen. She tried using Siri to reboot, but Siri was of no help. She just kept saying that she does not wear boots. Holding the power button down for an extended period also did not help. She does not have access to the computer that has her iTunes on it, so she cannot sync it via cable. She also does not want to do a reset because she has several photos that she does not want to lose. What can she do?

Try holding the Home and Power keys at the same time for approx 10 seconds or until the Apple logo appears, this will 'reset' the device - it won't lose any data doing this, let us know how you get on.
Regards,
Steve

Binding dropped error messages in the log, UNABLE TO USE BT

Similar Messages

Maybe you are looking for