Binding input and Output node elements

Hi all,
Binding Input and Output nodes of a model node.
Most of the time, we create a object of the input model node and then,
bind that object with wdContext.
Do we need to bind output node objects too in RFC Models?
Regards
Neha Singh

Hi Neha,
There is no need to create/bind the model node. you can execute a bapi using classes.
To execute a bapi, you should do the following things.
1. Import the RFC and create the model.
2. Create an object of the input class of the bapi
e.g. :
Zbapi_Test_Input commision_Input = new Zbapi_Testn_Input();
3. Set the input
commision_Input.setSpart(division);
4. execute the bapi
commision_Input.execute();
5. Disconnect the model
commision_Input.modelInstance().disconnectIfAlive();
6. Get the output. Create an object for output class
Zbapi_Test_Output output = commision_Input.getOutput();
String commission = output.getCommision();
Hope this helps you.

Similar Messages

(Input and) output formats from Photoshop Elements 6 for Mac

I noticed that (until midnight PT, anyway) Amazon has Photoshop Elements for the Mac at a lower price than usual. This brings up a question for me: What output formats can Photoshop Elements 6 produce? In particular, can it produce PNG? Also, can it accept PNG as input?

I think that all the formats like .bmp, camera RAW, EPS,PICT, TIFF, Filmstripn, IFF, JPEG, Photoshop pdf, Photoshop RAW,PNG etc are supported for both input and output.

How do I create an xControl with multiple inputs and outputs?

Hello,
i am trying to write a new Xcontrol Element. In the data model I can create data types using the cluster to create compound types, eg an int and an int array. But how do I create an xcontrol which has multiple data inputs and outputs?
Kind Regards

Limping_Twerp wrote:
Alright: I see: An xcontrol is either an input OR an output. How do I achieve an output? Secondly: So you are saying the only Elements that can have multiple inputs and outputs are VIs?
Can you take a few steps back and explain what you are actually trying to do. SubVIs and Xcontrols have nothing in common and it is not clear why you even try to compare them side by side (e.g. in terms of the number of connectors).
Your questions about input or output tell us that you seems to have some misconceptions about xcontrols. Xcontrols are like regular controls, except they have some built-in intelligence that you can program. Most front panel object can be either controls or indicators and the same is true for Xcontrol. You create an Xcontrol, and after placing it on the front panel you can decide if it should be a control (where the code reads the value) or an indicator (were the code writes values to it). When you define the xcontrol facade, you also need to program how the visuals change if it is changed from control to indicator or vice versa.
As a first step, you should opend the example finder and look at some xcontrol examples.
Again, what are you actually trying to do?
LabVIEW Champion . Do more with less code and in less time .

Input and output on same device, producer/consumer structure

Hello interested people,
I have a question about using the same device for both digital inputs
and outputs. I have written a simple program of one while loop
that continuously polls the device, processes, and requests. I
have addressed the device using two DAQmx Asst. and I have attached
them with their error in/out cluster terminals to provide data flow and
eliminate the chance of addressing the devices at the same time (which
produces an error). Now I want to change this program structure
to a producer/consumer loop foundation with state machine.
In this design, I will have the DI in the producer loop and the DO in
the consumer loop, under one of the states. I can't simply
connect the error in/out ports in this configuration, so my question is
how to avoid the error caused by addressing the same device
simultaneously with two different tasks (input and output)? I
have attached two VI's, the "One Loop" vi is the original configuration
(simplified), and the Producer-Consumer vi is a NONSENSICAL program
that simply represents the desired configuration. (I don't need
any comments on the programming of this vi, it is only an example for
illustration of the problem).
I am thinking about bundling the input data and the error cluster, both
from the PXI 6528 DI, into one cluster, queueing that up, and
unbundling the de-queued elements for some kind of data flow between
the producer loop and the "Request" state of the consumer loop.
Is this the right approach, or am I barking up the wrong tree?
Thanks
Attachments:
One Loop DO DI.vi ‏102 KB
Producer-Consumer DI-DO.vi ‏106 KB

Hello,
It sounds to me like you really have two modes:
1. user interface actions determine execution
2. user interface is locked, and execution is automated.
I think it would make sense to use the producer consumer for an architecture. Basically you would do the following:
1. program the producer to handle the user interface as you normally would.
2. provide one additional event case in the producer which would be your "automated handling" case. In that case, you could put a state machine which could run until whatever conditions were met to put your program back in "user interface mode".
Keep in mind that you can use custom USER EVENTS to programmatically generate events ie. you can trigger the start of your "automated handling" form anywhere in your code at virtually any time.
I think this would allow you to take advantage of the producer consumer architecture in its intended spirit, while integrating an automated routine.
I hope this helps!
Best Regards,
JLS
Best,
JLS
Sixclear

How to change the input and output schema in BPEL process

hi',
Please tell me how to change the input and output schema in BPEL process after the process is made.
thanks
Yatan

If your intention is just changing the content you are passing to bpel/returning from bpel
Here is another way
just update your default created xsd files with new elements, update wsdl elements in message definition and chnage bpel code to reflect new elements in activities
Regards,
Praveen

How to save input and output in file

hi ni
i have program that has some input and some output
i try to save the input and output in file word office or excel like this
error
extended
ideal
value
wq
wp
value
xq
xp
0.857143
0.7
0.6
2
0.5
1
1
thank in advace
best regards
m.s
lab view 2011
hi ?Q>
Solved!
Go to Solution.
Attachments:
adder in exteded stochastic.vi ‏37 KB

johnsold wrote:
Read from and Write to Spreadsheet File VIs should do what you want.
I did not take the time to try to decipher what your program is doing, but I think you could replace all those feedback nodes and Build Arrays with an integer data type and the Rotate function from the Numeric >> Data Manipulation palette. You will still need one shift regsiter or rfeedback node for each of the four signals.
You have duplicated code: Divide by 65535, multiply by 2, and subtact 1 followed by a > comparison. Make that a subVI and place 4 instances on your block diagram.
Those simple changes will make you diagram understandable, reduce its size to the size of a postcard, and make any future changes easier.
Lynn
thank
hi ?Q>

How can I use a different driver for audio input and output?

I did a search of course, and came up with something about an aggregate. I have no idea what this is, how to do it, or if it would even work for me.
What I am trying to do is:
1) Record into Logic Express using my Tascam US-122.
2) Have playback come out of my computer sound system, not the Tascam.
If I go over to the Audio setup window, I can only record when the driver is set to Tascam US-122. Likewise, I can only listen to sound when my Built-In Audio is selected. It gets rather annoying going between the two.
So, would this aggregate thing solve my problem? If so, how do I do it? Thanks for any help!
-allen

Yes it should do what you want.
Go to "Audio Midi Setup", and go to the Audio menu and click "Open Aggregate Device Editor". The interface is pretty simple but if you do get stuck, just use the help function in Audio Midi Setup, as it has a step by step guide.
Then when you return to logic, go to the Preferences>Audio>Drivers section and select Aggregate Device as the new driver rather than either the built in sound or the tascam. Then the inputs and outputs will apply to BOTH devices.

SSIS: How to use one Variable as Input and Output Parameter in an Execute SQL Task

Hello,
i need your help,I'm working on this issue since yesterday and have no idea how to deal with it.
As I already said in the tilte i want to start a stored procedure via a Execute SQL Task which has around 15 prameters. 10 of these should be used as input AND output value.
As an example:
i have three Variable:
var1    int        2
var2    int     100
var3    int     200
the stroed procedure:
   sp_test
     @var1 int
      @var2 int output
      @var3 int output
   AS
   BEGIN
        SET @var2 = @var2 * @var1
        SET @var3 = @var3 + @var1
   END
So in the Execute SQL Task i call the Stored Procedure as follwos:
    Exec sp_test  @var1 = ?, @var2 = ? output, @var3 = ? output
(I use an OLE DB Connection)
The parameter mapping is as follows:
User::Var1        input                   numeric              0                 -1
User::Var2        input/output         numeric              1                 -1
User::Var3        input/output         numeric              2                 -1
Now my problem. If i set  Var2 and Var3 as Input parameter the values are still the same after running the package. If i set them to a output value the are both Null because the procedure doesnt get any values.
I already tried to list them a second time - like
    User::Var2        input                  numeric              1                 -1
    User::Var2        output                 numeric              1                 -1
or i use a new variable
    User::Var2                  input                  numeric              1                 -1
    User::Var2Return        output                 numeric              1                 -1
but i alwas get the error
"Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done."
Has anybody an idea how I can solve this problem?
Thanks a lot.
Kind Regards,
Alice

Hi Alain,
thx for your answer.
I have around 15 procedures called one after the other to calculated and modify my values. Each procedure is responsible for an other but overlapping set of variables. So i thought it would be a good idea to call them one after the other with the needed variables via a execute sql task.
So if i use a result set, how i get my stored procedure to return 10 values? I would have to use a Function instead of a procedure, wouldn't i?
As if i have 15 procedures this would be a lot of work.
But thanks a lot for the idea. I think an other idea would be to create one function which calls all stored procedures and returns all the calculated values as a result set, wouldn't it?.
Kind Regards.
Alice

How can I make Apple Earphones be the Input and Output for Audio

I have some older headphones and they aren't compatible with a Mid 2010 (Intel Core i3) 21.5 Inch iMac
Is there some way to make Apple Earphones be the Input and Output for Audio in the iMac
This is a problem for me personally as when I am talking to someone on Skype the iMac picks up the In-built Microphone audio, and yes the headphones I'm using do work straight from the iMac as audio output
Any help is appreciated

you can connect the headset to something like this
http://www.ebay.com/itm/NEW-MaelineA-3-5mm-Female-to-2-Male-Gold-Plated-Headphon e-Mic-Audio-Y-Splitter-/381100440348
and then connect the mic to the input and the headset to the headset port

How to use a bluetooth cellphone for audio input and output

Hello, I was wondering how to set-up my Mac Book so that I can use my bluetooth cellphone for audio in and audio out. Ideally, I would like to use my handset for talking on iChat and Skype. Has anyone had any luck doing this? When I bond my cellphone these optiosn do not appear. I know that this is easy to do on a Windows machine but I am not sure about how to do it on my Mac Book.
Thanks!

Yes it should do what you want.
Go to "Audio Midi Setup", and go to the Audio menu and click "Open Aggregate Device Editor". The interface is pretty simple but if you do get stuck, just use the help function in Audio Midi Setup, as it has a step by step guide.
Then when you return to logic, go to the Preferences>Audio>Drivers section and select Aggregate Device as the new driver rather than either the built in sound or the tascam. Then the inputs and outputs will apply to BOTH devices.

FINALLY INPUTTING and OUTPUTTING Annotations!

Ok, before everyone thinks that this is a very bad solution, I have to tell that I`m no programmer and my knowledge of PostgreSQL, Ruby or any other language is very poor.
With useful help from Jamie Hodge, fbm and Nicholas Stokes (mainly)
I could manage to write a command for inputting and outputting from Final Cut Server Annotations.
So lets go to the fun part:
INPUTTING:
1- Create a Response called "Annotations IN" (or whatever you want):
a - Reponse Action: "Run an external script or command"
b - Run Script > *Commnad Path: /Library/Application Support/Final Cut Server/Final Cut Server.bundle/Contents/Resources/sbin/fcsvr_run
Command Parameters: psql px pxdb -c "COPY pxtcmdvalue FROM '/FCSRV/annotation-in.txt' USING DELIMITERS '|';"
2 - Create a poll Watcher with name: "Watch for Annotations IN"
a - Enable: true
b - Monitor Address: Chooses a Device (create a new one or use a tmp one) and path to where you`ll going to put a txt file with the annotations.
c - Response List: Choose the Response you created "Annotations IN" in my case.
d - Event Type Filter: Created, Modified
e - Poll Watcher > Listing Frequency: 2 (or any number of seconds you feel like it).
Listing multiple: 2
Wildcard include Filter: *.txt (or any custom extensions you want)
3 - Create a txt file and use this as a template:
{ASSET_ENTITYID}|1527|{TCIN}/(30000,1001)|{TCOUT}/(30000,1001)|{Annotation}|{USE RID}|{DATE}
Where:
{ASSET_ENTITYID} = Is the entityid of your asset. You can find what number it is by issuing:
/Library/Application\ Support/Final\ Cut\ Server/Final\ Cut\ Server.bundle/Contents/Resources/sbin/fcsvr_run psql px pxdb -c "SELECT pxmdvalue.entityid, pxmdvalue.value AS asset_name FROM pxmdvalue INNER JOIN pxentity ON pxentity.entityid = pxmdvalue.entityid WHERE pxmdvalue.fieldid='1543' AND pxentity.address LIKE '/asset/%';"
This will output ALL your assets, so if you know the name or want to parse the name you can use:
/Library/Application\ Support/Final\ Cut\ Server/Final\ Cut\ Server.bundle/Contents/Resources/sbin/fcsvr_run psql px pxdb -c "SELECT pxmdvalue.entityid, pxmdvalue.value AS asset_name FROM pxmdvalue INNER JOIN pxentity ON pxentity.entityid = pxmdvalue.entityid WHERE pxmdvalue.fieldid='1543' AND pxmdvalue.value='ASSETNAME' AND pxentity.address LIKE '/asset/%';"
Where in ASSETNAME you`ll have to put your Asset Name without extension.
{TCIN} and {TCOUT} is, of course, the TC`s points. In the form of: HH:MM:SS;FF
{Annotation} is the commentary.
{USERID} (in my case was 1)
{DATE}: This one is tricky. My example is 2009-03-15 19:31:15.839795-03
So is in the form YYYY-MM-DD HH:MM:SS.????? I really don`t know the rest. Could be milliseconds?
Of course one can write a script to translate everything from a txt file like:
ASSETNAME | TCIN | TCOUT | ANNOTATIONS | USER
But as I`ve said I`m no programmer
Ok.. now the time for the OUTPUT:
The command-line is:
/Library/Application\ Support/Final\ Cut\ Server/Final\ Cut\ Server.bundle/Contents/Resources/sbin/fcsvr_run psql px pxdb -c "SELECT pxmdvalue.value AS Asset_NAME, pxtcmdvalue.value, pxtcmdvalue.begintc, pxtcmdvalue.endtc FROM pxmdvalue INNER JOIN pxtcmdvalue ON pxmdvalue.entityid = pxtcmdvalue.entityid WHERE pxmdvalue.value='ASSETNAME';"
Where ASSETNAME is the Asset name without the extension.
Or issuing the following to OUTPUT ANNOTATIONS from ALL assets:
/Library/Application\ Support/Final\ Cut\ Server/Final\ Cut\ Server.bundle/Contents/Resources/sbin/fcsvr_run psql px pxdb -c "select * from pxtcmdvalue;"
Adding "> /PATHTO_WHERE_IN_WANT/ANNOTATIONSOUTPUT.TXT" at the end will put all output into a txt file.
It`s possible (in theory) to:
1- Create a boolean md field in FCSRV called "EXPORT Annotations" (don`t choose lookup)
2- add or create a md group called "Export Annotations" and add the above md field to it (don`t choose lookup)
3- Add "Export Annotations" md field to Asset Filter md group
4- Make a Response for Running external command. Command path: /Library/Application Support/Final Cut Server/Final Cut Server.bundle/Contents/Resources/sbin/fcsvr_run
Command Parameters: psql px pxdb -c 'SELECT pxmdvalue.value AS Asset_NAME, pxtcmdvalue.value, pxtcmdvalue.begintc, pxtcmdvalue.endtc FROM pxmdvalue INNER JOIN pxtcmdvalue ON pxmdvalue.entityid = pxtcmdvalue.entityid WHERE pxmdvalue.value=[FileName];' > ~/Desktop/ann-out.txt
(I`m having problem with this, it doesn`t work).
5- Make a Subscription that if Export Annotations modified = true, trigger if changed and trigger the Response above.
6- Add exporting annotations md group to Media md set.
In theory it`s possible to modify the FinalCutServerIntegrationSample get and input annotations instead of adding another "comment" field to md group list.
Few!
Ok so please help beautify this out!
This will be very useful for a lot of people.... We know that it`s only a matter of time to FCSVR have this function built-in... but this "time" could be years.
So let`s start ourselves!
Thank you very much!!
Regards!

AlphaBlue wrote:
jverd wrote:
What were you hoping for? Someone reading your mind for what exactly you need, and handing you a giftwrapped answer, without you doing any work or clearly communicating a specific problem? This site doesn't really work that way.Fair enough. I'm asking for insight into how to input from and output to a StarOffice Spreadsheet into/from a Java program. (Think java.io except with spreadsheet files instead of .txt files.) I already answered that question.
I need to accomplish this without the use of a community-created library.That's a bizarre requriement. Why?
>
Okay, [here you go|http://lmgtfy.com/?q=communication+between+StarOffice+Spreadsheets+and+Java].
If you don't have any knowledge or experience, on the matter, please refrain from directing me to a google search. I assure you, I have already performed such a task.How would I know that.
But okay, let's say I know that. Let's say you bothered to point out that you've already done that. Further, let's say I do have knowledge of the subject at hand. Maybe I'm an expert. Maybe I wrote Star Office and an open source library (which wheel for some reason you must reinvent). You are assuming that I also have psychic powers, so that I can read your mind and know exactly what you've read so far and exactly what parts of your very broad and vague question said reading did not answer.
In short, you have received answers commensurate with your questions.

XSLT Generation from input and output XML

Is it possible to generate an XSL mapping file in Java if we have input and output XML.
If yes, then how to achieve this when user defined functions are used during mapping?

Hi Prateek,
check the following links for Business connectors and adapter:
http://help.sap.com/saphelp_nw2004s/helpdata/en/92/3bc0401b778031e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/2c/4fb240ac052817e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/6a/3f93404f673028e10000000a1550b0/frameset.htm
Hope these help you.
Regards,
Anuradha.B

How to temporally match/save Input and Output Channels's data?

Hello, I have a voltage-input, voltage-output SISO system, and need to indentify its dynamic response (or transfer function) as a reference to a PID control. Without using the system identification toolbox, my goal is to generate/provide a sine sweep input (ranging 1Hz-5kHz for 10sec) to the system and to save the corresponding output response signal as well as the sweep input signal simultaneously.
I got a sample program online and am trying to modify it as attached, but I really need your advices/comments concerning several problems I am facing with:
1) With the below setting, the number of the acquired Input channel samples obtained is 5461, which is smaller than expected (i.e., 10000). What would I be missing in setting parameters?
- H/W: NI-USB-6341 DAQ
- AO: continuous samples with the waveform timing (1k sampling, 10000 samples => 10 sec, slower sampling just for testing purpose)
- AI: continuous samples, samples to read: 30k, rate: 1k
2) I am using flat sequence structure as a way to making the start point of saving AI and AO data same, but wonders if this is a right method or if there is other better approaches. (I had an idea of using an internal clock with "1-sample mode" for sync, but this may not work at the high speed sine sweep like 5kHz, right?)
3) I just want to provide the sine sweep just once to the system and do not require the "reset" functionality implemented in the original sample program. I failed to remove this "reset" part as I did not fully understand the sample code. If I run the attahed, the generated AO signal is periodically provided to the system. Please give me any advice to modify the program as I want.
Thanks for your help and valualble time.
Attachments:
siso.vi ‏230 KB

Hi J. Kim,
To begin, you say you want to synchronize your analog input and output so that they start at the exact same time, yes? To achieve tight synchronization, you need to use DAQmx VIs instead of the DAQ Assistant. There's a good overview of DAQmx VIs here. There's also a document that deals specifically with synchronization in DAQmx here. Additionally, if you go to Help>>Find Examples in the LabVIEW example finder, you can see many other examples of acquiring data using DAQmx.
As for your configuration, you have your analog input DAQ assistant wired far before your analog output DAQ assistant in your sequence strucutre, so the dataflow of the program will cause the analog input DAQ Assistant to execute before the output. They cannot be in different sequences if they are executing simoultaneously, and I would not use flat sequences here except to start the two tasks in DAQmx. Where did you find this example?
Best,
Dan N
Applications Engineer
National Instruments

I have on;y one audio port can i use it for input and output at the same time?

i have the new macbook pro 13 in and i want to connect aguitar as input and output on an amp but i have only one audio port

You can't use the jack as an input and output simultaneously. The solution is to look for a USB or Firewire interface to get your guitar sound into the computer.

Table name input. and output i need all rows and columns using procedures

hi,
question: table name input. and output i need all rows and columns by using procedures.
thanks,
To All

An example of using DBMS_SQL package to execute dynamic SQL (in this case to generate CSV data in a file)...
As sys user:
CREATE OR REPLACE DIRECTORY TEST_DIR AS '\tmp\myfiles'
GRANT READ, WRITE ON DIRECTORY TEST_DIR TO myuser
/As myuser:
CREATE OR REPLACE PROCEDURE run_query(p_sql IN VARCHAR2
                                     ,p_dir IN VARCHAR2
                                     ,p_header_file IN VARCHAR2
                                     ,p_data_file IN VARCHAR2 := NULL) IS
v_finaltxt VARCHAR2(4000);
v_v_val     VARCHAR2(4000);
v_n_val     NUMBER;
v_d_val     DATE;
v_ret       NUMBER;
c           NUMBER;
d           NUMBER;
col_cnt     INTEGER;
f           BOOLEAN;
rec_tab     DBMS_SQL.DESC_TAB;
col_num     NUMBER;
v_fh        UTL_FILE.FILE_TYPE;
v_samefile BOOLEAN := (NVL(p_data_file,p_header_file) = p_header_file);
BEGIN
c := DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE(c, p_sql, DBMS_SQL.NATIVE);
d := DBMS_SQL.EXECUTE(c);
DBMS_SQL.DESCRIBE_COLUMNS(c, col_cnt, rec_tab);
FOR j in 1..col_cnt
LOOP
    CASE rec_tab(j).col_type
      WHEN 1 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
      WHEN 2 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_n_val);
      WHEN 12 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_d_val);
    ELSE
      DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
    END CASE;
END LOOP;
-- This part outputs the HEADER
v_fh := UTL_FILE.FOPEN(upper(p_dir),p_header_file,'w',32767);
FOR j in 1..col_cnt
LOOP
    v_finaltxt := ltrim(v_finaltxt||','||lower(rec_tab(j).col_name),',');
END LOOP;
-- DBMS_OUTPUT.PUT_LINE(v_finaltxt);
UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
IF NOT v_samefile THEN
    UTL_FILE.FCLOSE(v_fh);
END IF;
-- This part outputs the DATA
IF NOT v_samefile THEN
    v_fh := UTL_FILE.FOPEN(upper(p_dir),p_data_file,'w',32767);
END IF;
LOOP
    v_ret := DBMS_SQL.FETCH_ROWS(c);
    EXIT WHEN v_ret = 0;
    v_finaltxt := NULL;
    FOR j in 1..col_cnt
    LOOP
      CASE rec_tab(j).col_type
        WHEN 1 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_v_val);
                    v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
        WHEN 2 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_n_val);
                    v_finaltxt := ltrim(v_finaltxt||','||v_n_val,',');
        WHEN 12 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_d_val);
                    v_finaltxt := ltrim(v_finaltxt||','||to_char(v_d_val,'DD/MM/YYYY HH24:MI:SS'),',');
      ELSE
        v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
      END CASE;
    END LOOP;
-- DBMS_OUTPUT.PUT_LINE(v_finaltxt);
    UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
END LOOP;
UTL_FILE.FCLOSE(v_fh);
DBMS_SQL.CLOSE_CURSOR(c);
END;This allows for the header row and the data to be written to seperate files if required.
e.g.
SQL> exec run_query('select * from emp','TEST_DIR','output.txt');
PL/SQL procedure successfully completed.Output.txt file contains:
empno,ename,job,mgr,hiredate,sal,comm,deptno
7369,"SMITH","CLERK",7902,17/12/1980 00:00:00,800,,20
7499,"ALLEN","SALESMAN",7698,20/02/1981 00:00:00,1600,300,30
7521,"WARD","SALESMAN",7698,22/02/1981 00:00:00,1250,500,30
7566,"JONES","MANAGER",7839,02/04/1981 00:00:00,2975,,20
7654,"MARTIN","SALESMAN",7698,28/09/1981 00:00:00,1250,1400,30
7698,"BLAKE","MANAGER",7839,01/05/1981 00:00:00,2850,,30
7782,"CLARK","MANAGER",7839,09/06/1981 00:00:00,2450,,10
7788,"SCOTT","ANALYST",7566,19/04/1987 00:00:00,3000,,20
7839,"KING","PRESIDENT",,17/11/1981 00:00:00,5000,,10
7844,"TURNER","SALESMAN",7698,08/09/1981 00:00:00,1500,0,30
7876,"ADAMS","CLERK",7788,23/05/1987 00:00:00,1100,,20
7900,"JAMES","CLERK",7698,03/12/1981 00:00:00,950,,30
7902,"FORD","ANALYST",7566,03/12/1981 00:00:00,3000,,20
7934,"MILLER","CLERK",7782,23/01/1982 00:00:00,1300,,10The procedure allows for the header and data to go to seperate files if required. Just specifying the "header" filename will put the header and data in the one file.
Adapt to output different datatypes and styles are required.

Binding input and Output node elements

Similar Messages

Maybe you are looking for