Binding with more than one data sources

So i have this table bound to a data source (call it A) and in it i have BID(Books ID) and UID (User ID). I don't want the table to show these numbers, i want it to show the name of the book coresponding to BID (and this name is in another table) and the name of the user coresponding to UID (this is also in another table). So, for this i have modified the SQL statement and added WHERE clauses and it all worked fine. Up to a point at least. After that, whenever i tried to make changes to A and the tables where the book names and user names are, i got a "Number of conflicts while synchronizing:" error. So i was thinking perhaps there is another way to bind the BID and UID to those specific names without the help of an SQL statement. Can anyone help?

Any possibilty of posting your SQL code? And which database are you using?

Similar Messages

Create a logical column with more than one data source

I'm having a problem to create a logical column with more than one data source in Siebel 7.8.
What I want to do is the union of 2 physical tables in one logical table.
For example, I have a "local_clients" table and a "abroad_clients" table. What I want is to have a logical table "clients" with the client data from the 2 tables.
What I've tried is dragging the datasources I need onto the logical column.
However this isn't working because it only retrieves the data from the first data source.

Hi!
I think it is not possible to do this just by dragging the columns to the logical table. A logical table can have more than one source, but I think each column must have just one direct source column.
I'm not sure, but maybe you should do the UNION SQL to get the data of the two tables. In the physical layer, when you create a new physical table, it's possible to set the "table type" as a "SELECT". I didn't try that, but it seems that it's possible to have the union table in the physical layer.
Bye.
Message was edited by:
user578388

Binding a component to more than one data source in Design Studio 1.3

Hi All,
Is it possible to bind more than one data source to a component in Design Studio 1.3?
I have 2 Bex queries- one having the current year data(say 06.2013-05.2014) and the other having the previous year data(say 06.2012-05.2013).
I want to create a column chart with x axis labels as 06,07,08.............01,02,03,04,05.
The 05 will show 2 columns for 05.2014 and 05.2013
The 04 will show 2 columns for 04.2014 and 04.2013
and so on
The 06 will show 2 columns for 06.2013 and 05.2012.
Can this be achieved in Design Studio if only one data source is possible for a column chart?
Thanks in advance for your responses,
Sarah

I don't see where this is possible out of the box as the properties for the chart show only one data source
Is the data coming from one InfoProvider? If so could you create one query that shows current year and with a BEx variable/offset show prior year?

Why won't data merge allow more than one data source at a time?

I need to number tickets, 8 up on a tabloid page, in InDesign (CS5)
I have found out how to use data merge, but it won't allow me to select more than one data source at a time, therefore, making me use 800 sheets of paper instead of 100. That's not acceptable!! Is there a way to merge the pdfs if I make 8 different ones in the places they need to be? Each file that I export will have 100 pages, so is there a way to merge the files to put all eight tickets on each sheet, sequentially? This is driving me nuts!!!!!!!

Past users have solved this frustrating problem. You can find their solutions with a Google search like "InDesign data merge multiple sequential items on one page" without quotes.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices
Frankie at Quad wrote:
I need to number tickets, 8 up on a tabloid page, in InDesign (CS5)
I have found out how to use data merge, but it won't allow me to select more than one data source at a time, therefore, making me use 800 sheets of paper instead of 100. That's not acceptable!! Is there a way to merge the pdfs if I make 8 different ones in the places they need to be? Each file that I export will have 100 pages, so is there a way to merge the files to put all eight tickets on each sheet, sequentially? This is driving me nuts!!!!!!!

Select More than one Data Source in UM Configuration

hi,
We configure our portal EP 6.0 with the CRM Dev system, such that the users created in CRM Dev system reflect in portal as well.
now the problem is in CRM Test system. when we create users, users are going to create in CRM test system.but our portal is configured with CRM Dev system.
is there any way to configure portal with both CRM Dev system users and CRM test system users.
thanks

See Select More than one Data Source in UM Configuration

Can a master data will have loading from more than one data source

Dear gurus,
I have a master data object which has every day loading from one particular data source. Now I got a requirement to load data from another data source. If we load data from more than one data source , will there be any problem with data? Will it accept loading from more than one data source.?
Regards
Rs

Hi Ram,
We can load the data to target morethan one datasource.Thats advantage in BI compare to BW. It will accept loading from more than one datasource.but you have to take care about characteristic and attributes are the same in both datasources like that.
Regards,
SVS

Can BO universe design tool read from more than one data source

Hi Experts
can I add personal data (from excel or Text) on a designer that is connected to relational Database
can we combine more than one universe from different data sources to do so
Please advise
thanks all

Thanks for reply
I tried the linked universe concept but it is not working when I read in this topic in the universe design tool guide it indicated that
both universes should have the same database I cote from this book
("The core universe and derived universe use the same data account, or database, and the same
RDBMS.")
I also checked in the designer help it says the same condition
If you have idea how to do so please send me the steps
thanks

Building report from more than one data model

Hi Experts,
I have a requirement to build a report in BI Publisher.
The report has three section each having their own data source.
When i try to create report in BI Publisher it allows me to associate one data model per report.
is it feasible to have more than one data source for a single report.
Cheers,
Andy

Hi Andy,
Not sure If this meets your requirement, please do have a look at the following links:
http://www.rittmanmead.com/2008/04/24/bi-publisher-reports-with-multiple-data-sources/
http://blogs.oracle.com/xmlpublisher/2008/07/multiple_datasources_i.html
http://blogs.oracle.com/xmlpublisher/2008/07/multiple_datasources_ii.html
Thanks.

Get the data with more than one of the desired value

Hi,
I need to pull the records with more than one value of 'Other' on the delivery days fields.
The delivery fields are mon,tue,wed,thu,fri and sat that tells the where the item will be delivered. The value can be Home, Work, or Other.
Here is the Sample data:
cust_id: 123
item: newspaper
mon: Home
tue:Work
wed: Other
thu: Home
fri: Other
sat: Other
And here is my query so far.
select
cust_id,
item,
mon,
tue,
wed,
thu,
fri,
sat,
sum(case when (del_mon = 'O' or del_tue ='O' or del_wed ='O' or del_thu ='O' or del_fri ='O' or del_sat='O') then 1
else 0 end) as day_ctr
from customer
Could you please help me with the right formula I need to get this?
Thank you in advance..

First
DESC customer
Second
Can you explain what you are trying with
sum(case when (del_mon = 'O' or del_tue ='O' or del_wed ='O' or del_thu ='O' or del_fri ='O' or del_sat='O') then 1 else 0 end) as day_ctr
Third
Usually it's helpful a example of the result you want...
Perhaps you want this
select DECODE(mon,1,(select distinct mon from customer), 'OTHER') mon,
        DECODE(tue,1,(select distinct tue from customer), 'OTHER') tue,
        DECODE(wed,1,(select distinct wed from customer), 'OTHER') wed,
        DECODE(thu,1,(select distinct thu from customer), 'OTHER') thu,
        DECODE(fri,1,(select distinct fri from customer), 'OTHER') fri,
        DECODE(sat,1,(select distinct sat from customer), 'OTHER') sat from
select
COUNT(DISTINCT mon) mon,
COUNT(DISTINCT tue) tue,
COUNT(DISTINCT wed) wed,
COUNT(DISTINCT thu) thu,
COUNT(DISTINCT fri) fri,
COUNT(DISTINCT sat ) sat
from customer
)

Document/literal style wsdl with more than one port

Recently I have changed wsdl style from rpc/encoded to document/literal as BPEL does not handle soapenc:arrayType. The wsdl contains 2 operations and few complex type definitions.
In BPEL Designer I have created a process that invokes all operations defined in the wsdl, but only one of them will have some data in the response message and the other one will have an empty message. On the other hand, when I use stub generation to invoke Web Service everything is working fine.
If I provide separate wsdl for each operation (in BPEL process I would have two partnerLinks instead of one) than it works fine.
Does this mean that BPEL does not handle document/literal style endpoints with more than one port (operation)?
I have tested this with the orabpel_2.0_J1_win32.exe and orabpel_2.0rc9_win32.exe. Web Services, used for this test, are deployed in Jboss 3.2.3 and axis-1_2beta3.
WSDL used as partnerLink:
<?xml version="1.0" encoding="UTF-8" ?>
<wsdl:definitions targetNamespace="http://test" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://test" xmlns:intf="http://test" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<wsdl:types>
<schema elementFormDefault="qualified" targetNamespace="http://test" xmlns="http://www.w3.org/2001/XMLSchema">
<complexType name="CardId">
<sequence>
<element name="cardType" nillable="true" type="xsd:string" />
<element name="number" nillable="true" type="xsd:string" />
</sequence>
</complexType>
<complexType name="CardIdArray">
<sequence>
<element maxOccurs="unbounded" name="item" nillable="true" type="impl:CardId" />
</sequence>
</complexType>
<element name="getCardsReturn" type="impl:CardIdArray" />
<complexType name="CardholderCards">
<sequence>
<element maxOccurs="unbounded" name="cards" nillable="true" type="impl:CardId" />
<element name="serialNumber" nillable="true" type="xsd:string" />
</sequence>
</complexType>
<element name="retrieveChReturn" type="impl:CardholderCards" />
</schema>
</wsdl:types>
<wsdl:message name="retrieveChRequest" />
<wsdl:message name="getCardsRequest" />
<wsdl:message name="retrieveChResponse">
<wsdl:part element="impl:retrieveChReturn" name="retrieveChReturn" />
</wsdl:message>
<wsdl:message name="getCardsResponse">
<wsdl:part element="impl:getCardsReturn" name="getCardsReturn" />
</wsdl:message>
<wsdl:portType name="TestService">
<wsdl:operation name="getCards">
<wsdl:input message="impl:getCardsRequest" name="getCardsRequest" />
<wsdl:output message="impl:getCardsResponse" name="getCardsResponse" />
</wsdl:operation>
<wsdl:operation name="retrieveCh">
<wsdl:input message="impl:retrieveChRequest" name="retrieveChRequest" />
<wsdl:output message="impl:retrieveChResponse" name="retrieveChResponse" />
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="TestServiceSoapBinding" type="impl:TestService">
<wsdlsoap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
<wsdl:operation name="getCards">
<wsdlsoap:operation soapAction="" />
<wsdl:input name="getCardsRequest">
<wsdlsoap:body use="literal" />
</wsdl:input>
<wsdl:output name="getCardsResponse">
<wsdlsoap:body use="literal" />
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="retrieveCh">
<wsdlsoap:operation soapAction="" />
<wsdl:input name="retrieveChRequest">
<wsdlsoap:body use="literal" />
</wsdl:input>
<wsdl:output name="retrieveChResponse">
<wsdlsoap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="TestServiceService">
<wsdl:port binding="impl:TestServiceSoapBinding" name="TestService">
<wsdlsoap:address location="http://localhost:8080/axis/services/TestService" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>

Hi Dragana,
We definitely support the ability to call a web service that exposes two operations (document/literal or not).
Glancing through your WSDL, it looks good.
Could you please try to tunnel the second request and see 1) what data is sent to the service and 2) what data is returned by the service?
Can you please email us a reproduceable case so that we can help troubleshoot in parallel?
Thank you,
Edwin
[email protected]
please rename .zip to .zap

Problem with more than one item in a track

DVDSP 4.0.2 / OSX.4.2 I've built a DVD with several tracks. In each track I've placed several .m2v files, one after another. Finished build plays fine on my Mac and on one of my stand alone DVD players. But on another stand alone (Sony DVP-S360) something very odd happens. DVD begins to play just fine, but whenever it encounters a track with more than one source file, it will play until it gets to the spot in the program where the second source file is in the track and then it hangs and won't do anything. I'm just curious if anyone has any insight into this problem. Is it a DVDSP conflict thing with certain players? Or is this Sony player just not capable of playing a DVD built this way? Thanks.

This page here:
http://www.videohelp.com/dvdplayers.php?DVDnameid=428&Search=Search&
has someone talking about finally getting burned DVDs to work, which suggests they previously had problems. I can't think why the track would not seem like continuous video, as if it had always been that way. Our Sony DVD player at work seems sensitive to higher data rates. What data rate did you use?

Reports 9i Graphs with more than one query..

Hello,
I am converting my 6i reports to 9i reports. On my graph reports with more than one query, when I invoke the graph wizard it changes the value of the src to the wrong query automatically. When I run my report, I am getting the error REP-0069 Internal Error rwlib-1: REP-6219 Column (Column Name) not in given cursor hierarchy. Although it's a pretty easy fix to go into the graph settings in the property palette and change it back, it is extremely frustrating. Has anyone else ran into this problem and did you find a permanent fix?
Thanks,
Laura

Hi Laura
One workround would be to create a new query in the Data Model that includes desired fields, and then source
chart to the new group.
FYi, bug2527100 was filed on this issue and is already fixed. The fix would be available in 9i Reports 9.0.2.2 patch. Reports 9.0.2.2 patch is scheduled to be released on Mar 05 2003 (tentative date).
Thanks
The Oracle Reports Team

How can I use more than one Data Provider in my web Apps

I am trying to use two different data provider in my web apps to run two different queries from the same table ,the data provider A is working correctly but when I attempt to run data provider B ,It display an error page ,here is the error message : Exception Details :javax.servlet.ServletEx ception
java.lang.RuntimeException: java.sql.SQLException : Cannot connect .Both dataSourceName and url properties are null.

Hi,
You can use more than one data provider in your application. However if you have defined a dataprovider for a particular table already, and wish to bind a component, select the component and use its context menu to Bind to Data...

Error while running spatial queries on a table with more than one geometry.

Hello,
I'm using GeoServer with Oracle Spatial database, and this is a second time I run into some problems because we use tables with more than one geometry.
When GeoServer renders objects with more than one geometry on the map, it creates a query where it asks for objects which one of the two geometries interacts with the query window. This type of query always fails with "End of TNS data channel" error.
We are running Oracle Standard 11.1.0.7.0.
Here is a small script to demonstrate the error. Could anyone confirm that they also have this type of error? Or suggest a fix?
What this script does:
1. Create table object1 with two geometry columns, geom1, geom2.
2. Create metadata (projected coordinate system).
3. Insert a row.
4. Create spacial indices on both columns.
5. Run a SDO_RELATE query on one column. Everything is fine.
6. Run a SDO_RELATE query on both columns. ERROR: "End of TNS data channel"
7. Clean.
CREATE TABLE object1
id NUMBER PRIMARY KEY,
geom1 SDO_GEOMETRY,
geom2 SDO_GEOMETRY
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM1',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM2',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO object1 VALUES(1, SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(550000, 450000, NULL), NULL, NULL));
CREATE INDEX object1_geom1_sidx ON object1(geom1) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
CREATE INDEX object1_geom2_sidx ON object1(geom2) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE' OR
SDO_RELATE("GEOM2", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
DELETE FROM user_sdo_geom_metadata WHERE table_name = 'OBJECT1';
DROP INDEX object1_geom1_sidx;
DROP INDEX object1_geom2_sidx;
DROP TABLE object1;
Thanks for help.

This error appears in GeoServer and SQLPLUS.
I have set up a completly new database installation to test this error and everything works fine. I tried it again on the previous database but I still get the same error. I also tried to restart the database, but with no luck, the error is still there. I geuss something is wrong with the database installation.
Anyone knows what could cause an error like this "End of TNS data channel"?

Send email from SAP with more than one attachment

Hi all,
How can i send email with more than one attachment and different types of document(doc,pdf,etc.) from SAP to external?
Besr regards,
Munur

Hi,
I use :
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
the main problem with different attachemts is to genereate the packing_list.
the packing list is a kind of description of the data table... where ist the start of an image, end, size...
"Creation of the entry for the compressed attachment
        objpack-transf_bin = 'X'.                    " it could be an image
        objpack-head_num = lv_head_num_count . " inital 1 each att add 1
        objpack-head_start = 1.                     " fix
        objpack-body_start = gv_startnum.    " table with attachments 1. line one
        objpack-body_num = tab_lines.          " how many lines are in the table of attachment
        objpack-doc_size = tab_lines * 255.   " size of the attachment...
       objpack-doc_type = lv_typ . " 'JPG'.
        objpack-obj_name = 'ATTACHMENT'.
        objpack-obj_descr = lv_stripped_name " name of the JPG
   APPEND objpack.
   APPEND LINES OF lt_goscontent TO gt_maildata. " data Table...
bestreg
robert

Binding with more than one data sources

Similar Messages

Maybe you are looking for