Bins in the interim storage type

Hi
The client has a requirement where the interim storage type 902 (GR Area External Receipts) needs to be bin managed. i.e. it should be possible to select the bins manually. Std. system has PO no. as dynamic bin. Is this possible? If yes, how??
Thanks in advance
DB

yes, this is possible..
Check the documentation(sap library) on this for details..

Similar Messages

WM-PP : Backflush a material from different bins in the same storage Type

Hi Gurus,
We have a business scenarion where we do manual staging for production , the staging area has different bins within the same storage type for the same material, I am wondering if there is a way to backflush the material from different storage bins upon prod. order confirmation (using a control cycle?)
Thanks
Kris T

Look like it's not possible using the SAP standard.

Why do we need Interim Storage Type ?

Why do we need Interim Storage Type ? If you say it's acting as an intermediatary buffer location... Then why don't we need any Interim Storage for Bin to Bin stock movement??
Any pointers will be appreciated .

You have answered the for your question number 1.
I am going to answer for your question number 2:
We usually have interim storage bins in interim storage types. But these will disappear after the stock moved from interim bins.
This interim storage type/bin concept is created to map the real business process. Let's talk about the examply GR from supplier. Usually,
Warehouse personnel, unload the stock from truck and keep a place called staging area. This is in SAP called Interim storage area.
At this time, transaction is completed for IM side, Ie the material document is created and MM-WM trigger point TR also created. and depends the SAP config settings, this TR may be converted to as a TO and waiting for the confirmation.
Hope it helps.

Interim Storage Type Configuration

Hi All
I want to find out on interim storage type configuration, if it is possible and flexible in that you are able to configure it in such a way that you are able to separate the movements into the storage types according to the diffrent commodities (material types) and within those commodities, you can separate/filter your gains, losses and adjustments. What I am looking at, at the end of the day is to be able to pull through a report of interim storage type where I would be able to see all my losses, gains and adjustments in terms of quantity sitting on the interim storage type.
Regards
Khuselwa

Hi
I am not sure what you want to see as stock in interim st types are not neccessarily gains or losses.
Interim st types are used in SAP to recognise that some stock exists and needs to be moved such as 902 for goods receipt or 921 for stock transfers.
If you have gains or losses which are created by adjustments you can use the 'Reason For Movement' field when you create the gain or loss (this field needs to be congigured) and then you can run a report MBGR to see them.
I hope that this helps

In wms continuous to the automatic storage type and bin in the destination

hi
Thanking for givining the solution ,In continuous to the automatic storage type and bin in the destination your telling that fixed bin should be enter in the wm2 view in the mm01 ,
i am not getting fixed bin means which bin should i enter in the mm01 wm2 view can explain clearly.
thanks

First you create your WM views in MM01 with just entering the warehouse number but no storage type in the organisation pop-up.
Once you have done this and saved the material master, you do again MM01 for the same material number and select the WM 1 and 2 view and enter the warehouse number AND the storage type number in the organisation pop-up.
Now SAP gives you some more fields in WM2 view. AMong them the fields you are looking for.

Putaway quantity does not show in Interim Storage Type 916

Hi all,
It could be a silly quesiton however would need your help with the issue below.
When I create Picking TO from Outbound Delivery, usually I will see the Pick Quantity from Source Storage Bin and Putaway Quantity showed in Interim Storage Type 916. However, for the warehouse I'm working on I could not see the Putaway Quantity showing in Sty 916, only Picking Quantity displayed from source storage bin.
For example, I created picking TO# 17439 to pick stock from storage type 001 to destination storage type 916. Here I only see the 'Pick Quantity' showing in storage type 001. I don't see 'Putaway Quantity' shows in Storage Type 916.
Would appreciate if anyone can provide some advices. Thanks.
Khanh Ngo

Hi Jurgen, I have cancelled the TO above for some other tests. I have created a new delivery, please see the new TO#17442 with LT21:

Storage bin not found (enter storage type) L3398

Hi,
We have an very critical issue. We have gone live on 14th , only one day before. Now our system is showing the message
"Storage bin not found (enter storage type) L3398.""
We have defined Open storage type in our system where , mix storage is allowed. There are 10 bins in this storage type. There is not capacity check for these bins. Now system is not searching bin from Open storage and we have stucked with TO creation. System is not allowing us to created any TO.
KIndly do the help
I will be very thankful if reply fast.
Regards,
Manish I

Hi MANISH,
Though there exists many storage bins , the system is not able to find these bins because proper storage unit type is not defined.
System identifies the destination based on the following criteria :
Activate Storage Type Search
Activate Storage Section Search
Activate Storage Bin Type Search
Go through the below customising for better understanding :
SPROLogistics ExecutionWarehouse Management--Strategies
Maintain the Warehouse Management 2 view of Material master with Palletization data .
Thanks,
Swamy H P

List of standard Interim storage types - WM

What are the standard Interim storage types
In my system people have created few starting with 9 hence not able to diffrentiate which are standard and which are non-standard
Thanks

The Standard Interim storage types starts with 9**.
In the table T331, the below fields will have 'X', which shows everything is allowed.
MISCH - Mixed storage
ZULAG - Addition to stock
NEGAT - Negative stock qty
LENVW - Storage Unit Management (will be empty)
The reason for the Storage Unit Management will not be selected was the HUS can packed and repacked with no restrictions.
I hope you can find the difference based on that.

Are Interim Storage Types HU managed?

Hi, Please let me know if interim storage type can be HU managed? How can I do this?
Any help on this will be greatly appreciated.
Thanks.
with regards,
Muthu Ganapathy.

Hello Muthu,
In the same path as above, you will find the "Define storage type" node.
- Execute that node
- select the storage type for your warehouse.
- on the bottom of screen, you will find "HU picking control"
- Select the appropriate option.
This will give you fair idea about HU in Warehouse.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOHU/LOHU.pdf
Hope this helps
Regards,
Arif Mansuri

Different production good receipt interim storage type by workcenter

Hello,
When a semifinished material is produced and 101 movement is performed, material is located at interim storage type 901.
As each workcenter is responsible of staging material produced on his area, in order to have an accurate control of the materials that are still pending of staging in a workcenter, we want to have a different interim storage type for each workcenter.
How can we achieve that, without using different movements types for each workcenter?
thanks a lot for your help,
Hannover,

Hi
Pls analyse the below mentioned scenario whether its suitable for your business process
In case if you receive a particular material X from work center A and material Y from work center B , that is what i meant to say is if there is a clear demorgation between materials from a particular work center (Material X will be received only from work center A not from any other work center) then you can use the special movement indicator in the material master and in the ref mvt type-WM mvt type linkage you can mention the special mvt indicator for a WM mvt type and assign the relevant storage type in the WM mvt type level config settings
In this case you need to create multiple WM mvt types not ref/IM mvt types and assign different interium storge types to the relevant WM mvt types.
Regards
Amuthan M

Storage Bin for Interim Storage Type 902 for GR

Hi,
We know that the the dynamic storage bin for goods receipt for PO is the PO number. However, when we are posting GR, system creates TR with interim storage bin as material document number.
I looked into the movement type config. However, we can only state that whether interim bin should be cordinates or fixed bin or dynamic bin. It has no way to mention what that dynamic bin would be.
Can you please suggest a way to change the dynamic storage bin as PO number instead of material document number.
Thanks,
Shekhar

Dear Shekhar,
Could you please check in view V_T308 (transaction code OMNF) whether the indicator "Dynamic bin material document" is set for your warehouse number and requirement type B?
Best regards,
Christiane
Edited by: Christiane Schnellenbach on Apr 12, 2010 10:25 PM

Manual (Dynamic) Interim Destination Storage Type instead of 916 for Outbound delivery T.O

HI,
we would like to create transfer order manually for outbound delivery.here both source and destination need to be given manual
i know that the interim storage type 916 given in the interface movement type , while T.O creation for the outbound delivery
we would like to have the destination interim storage type as a manual entry so i kept both destination and source storage type blank,and system permits to do picking (T.O Creation )
Created Transfer Order, with source and destination details and confirmed T.O.
But when i do the goods issue getting error as
Storage bin MT1 does not exist (check your entry)
Message no. L9009
when i checked table LIPS- LGTYP and LGPLA , both fields are empty.
Please let me know how can i make this functionality.
Thanks.

The requirement is , my interim storage areas are real storage areas,for which goods are issued the stock goes to interim storage area and PGI will be made after verification ,but the interim storage area is dependent on the customer , not a fixed one which we will know only when we deliver the goods .
I use that process too, with verification on the final storage area before shipping, but what I do is to use SD in conjunction with WM. I use the gates in the Outbound Delivery, to separate the stock, since WM creates a bin in 916 for each delivery document and I can use that to know in which gate each quant is.
That way, everything goes to 916, but I have a report that tells me which stock is near each gate, so I can run the audit process before shipping.
It's not completely standard, but WM standard is very hard to use without an additional UI layer on top anyway.

Stop IM posting from interim storage bin

Hi,
We have a WM activated where the Transfer order is created and posted automatically when any material movement is posted.
Now when the stock in WM is already allocated to delivery still its possible to post the IM.
For e.g.
1 peice of material 'ABC' is available in IM and also in warehouse. A outbound delivery is created which has trigered a transfer order. Now the stock is lying in 916 interim storage type.
other user does a transfer posting movement (311 movement) of same material. Since the material is not available in the normal storage type, the transfer order is not created automatically.
Now the stock lies in 921 interim storage type.
I want to avoid such scenario. Is it possible to stop any posting in IM if the stock is not available in the normal storage type?
Regards

Hi Frenchy,
Thanks for your valuable input. This was something new for me.
I checked the settings in OMM8, the 'No stringent FIFO setting' is there for all the Interim storage type.
I think this will not help because when the IM posting is done, since there is no stock in normal storage type, system is not creating a transfer order (as per customization which is to created TO automatically). It only creates a open transfer requirement without finding a source storage bin.
However we have found another way to stop the posting. we have set a availability check rule to the transaction and movement type in IM which check the available stock during the posting and sets a waring/error message.
However this is at IM level.
Is it possible to stop the posting at IM via some setting in WM?
Regards

Fixed bins to be defined in a storage type

I have multiple materials in a storage type in which some of the bins need to be assigned as fixed bins and some of them not. Is this possible ? I have a requirement to use the fixed bins to be replenished from High rack.If this is not possible then I need to create so many sections to make sure each material need to be putaway in one assigned bin for that material.
Any ideas?

PutAway and Picking Strategies are determined at Storage Type level.
So you can only have one strategy per Storage Type : either FIXED BINS or another strategy.
One Storage type does not have to be BINs next to one another.....
In the same physical space you can have two storage types where some BINs are Fixed Bins in one Storage Type and some BINs are not fixed Bins in the other Storage Type....that is one possibility.
If that is not possible, then I would look at having a PutAway and Picking Strategies that are so restrictive for each material that they have to go to a specific BIN .
Those are only a few ideas, it really depends on what your constraints are, how many materials are concerned, etc....
And finally, there is the user-exit option.....
Edited by: AGagnon on Aug 11, 2010 11:31 PM

Question about storage type 902

Hello Everybody!
I´m implementing SAP WM and I have a doubt and is the next one:
When I do a material movement, system returns an error if the material is not create in the destiny storage type.
On the other hand, I create a purchase order and when I make the good entrance, the system stocks the material in the storage type 902 even the material is not create in this storage type.
Why is the reason for this? Is not necessary to create the materials in the standar storage type like 902?
Thank you very much for your help!

Hello Javier
You are right when it comes to goods receipt or goods issue. All the 9** series storage types are interim storage types which are fictitious. You only have to create 1 bin for each interim storage types. When you create the material master maintain the WM views only for the warehouse number and the other storage types that you use where all the bins are located. For storage types 902 the PO/inbound delivery number and for 916 outbound delivery number will be displayed as the bin numbers which are dynamic bins that gets deleted automatically once you complete the movements.
Thanks
Anandha

Bins in the interim storage type

Similar Messages

Maybe you are looking for