Binu 3.0

Will biNu 3.0 work with verizon new feature phones.

I am not familiar with this application. I don't see that we have it available in the GIN market. You can view available apps here.

Similar Messages

  • Is it possible to manually setup a Folder Redirection Policy on SBS 2008 for one user? Also are you able to set up folder redirection on a different server than you have SBS 2008 on?

    I have a SBS 2008 DC I would like to be able to change the Folder Redirection to a different server.  I also would like to be able to test with one user.  I read on the forums that it is best to use the wizards for SBS2008.  The only problem
    I have with using the wizards is that I am unable to test and I am also unable to use a network share for my redirection location.  

    Hi,
    I am sure you would get some help from :
    http://blogs.technet.com/b/sbs/archive/2010/10/08/folder-redirection-in-small-business-server-2008.aspx
    https://social.technet.microsoft.com/Forums/en-US/448583ca-471e-4a0c-9d26-aa9181e73962/folder-redirection-changing-location?forum=smallbusinessserver
    User setting can be found:
    Windows SBS Console > Shared Folders and Web Sites > Shared Folders - in Tasks panel click on Redirect folders for user accounts to the server.
    Under Folder Names Select folder(s) you want to redirect (e.g. Documents).
    Under User Accounts select accounts you want to have folders redirected.
    Click OK
    Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd - Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Problem in BEx analyzer output in BI dev and BI Quality

    Hi All
    I am facing a problem in BEx analyzer output in BI Dev and BI Quality server where the query is make on BI infoset.
    When i am executing the query in BI dev server then it is giving the output result but when i tried to executing the BI query in BI quality server the i got 'No available data found result'.
    I have also checked the same selection input result in infoprovider for infoset and output is getting for the same.
    Please suggest for regarding solution.
    thanks & regards,
    Gourav Sekhri

    Hi,
    check whether you have loaded data in to quality server if no, please load data for all the target involved in info set.  If data loaded check all the target 'request for reporting available 'or not.
    Also check whether data is showing in infoset or not.. if data availble there change your selection critiria accordingly.
    Thanks
    BVR
    Edited by: binu v. rajan on Aug 20, 2011 4:23 PM

  • Display data vertically using sap script

    Hi Developers,
    Is there any way to display data vertically in a form using sap script?
    thanx in advance,
    binu

    Hi Binu,
    It is not possible to rotate text in SAPscript.  The usual work-around, provided this is static text and not from a variable, is to scan an image of the text and include it as a graphic.
    Regards,
    Nick

  • Cisco Jabber for Blackberry

    Hi Jabber Experts,
    I was trying with Cisco Jabber IM for Blackberry(9700) , i had manually loaded the application on the device and chose the CUPS(On-Premise) mode installation. I was able succesfully login with my CUPC login credentials. I could see all my contacts, presence info and chat. But Iam not able to place a call. I tried to search one of the contact profile and see no  information there, though my desktop(cupc) application all the contact profiles populated with required informations(work phone, cell,email)
    We have a LDAP integration on CUPS.
    Please advice how can i place a call from my Cisco Jabber Application?
    Regards
    John

    Hi Binu,
    Cisco Jabber for Blackberry probably has similar causes for failure to register as the Android version.   You may wish to check out the "Cisco Jabber Registration Fails" section at the following URL for ideas:
    http://www.cisco.com/en/US/docs/voice_ip_comm/cumc/cisco_jabber/Android/86/Cisco_Jabber_Android_8.6.x_Admin_Guide.html#wp170272
    Kind regards,
    Craig

  • Help need to build a report query

    Hi all
    I am using reports 6i and 10 g db.
    I am asked to generate letter format report. The content of letter format will be from employee_deschange_details.edcd_desc field .
    The parameter i have to pass is emp_code and dsm_code. Based on it the content should be displayed.
    In employee_deschange_detail.edcd_desc field has letter content in a particular way as follows
    for example
    It is my pleasure to inform you that you have been promoted to the position %DESIGNATION effective from %EFFECTIVE_DATE.The %DESIGNATION and %EFFECTIVE_DATE are identifier which should get replaced by actual value.
    The identifiers and its actual value is stored in employee_deschange_detail.edcd_title_name and employee_deschange_detail.edcd_param_value respectively.
    the value are stored like |%DESIGNATION|%EFFECTIVE_DATE| in edcd_title_name and in
    edcd_param_value the data stores like |GM-FIN|21-JUN-2010|
    The user can add extra letter content through a form ,so that the content's may get vary.
    Thanks,
    Rincy

    Hi Arif
    If have planned to create PLSQL query as follows but it give message in compilation
    Error 0 at line,column 0
    REP-0737: Should be a function with return type 'ref cursor'
    I havent used plSql query yet, not able to proceed. Please go through and please suggest a best way .
    function QR_1RefCurDS return cur_ref_type
    is
    cursor cur_edcd is
    select edcd_code,decode(instr(edcd_desc,'%TABLE1'),0,edcd_desc,substr(edcd_desc,1,instr(edcd_desc,'%TABLE1')-1)) part1,
    decode (instr(edcd_desc,'%TABLE1'),0,null,substr(edcd_desc,instr(edcd_desc,'%TABLE1')+length('%TABLE1'),length(edcd_desc))) part2,edcd_serial
    from employee_deschange_details
    where edcd_orgn=:p_orgn
    and (edcd_ctry=:p_ctry or :p_ctry is null)
    and (edcd_loc=:p_loc or :p_loc ia null)
    and (edcd_oru=:p_oru or :p_oru is null)
    and (edcd_code=:deschange_code or :deschange_code is null)
    and (edcd_emp_code=:employee_code or :employee_code is null)
    order by edcd_emp_code,edcd_serial desc;
    v_srl number;
    v_part1 varchar2(4000);
    v_part2 varchar2(4000);
         Cursor cur_param_value
         is
         select
    substr(edcd_title_name,
      instr (edcd_title_name, '|', 1, level)+1,
      instr (edcd_title_name, '|', 1, level+1) - instr (edcd_title_name, '|', 1, level) -1) res,
    substr(edcd_param_value,
      instr (edcd_param_value, '|', 1, level)+1,
      instr (edcd_param_value, '|', 1, level+1) - instr (edcd_param_value, '|', 1, level) -1) result
    from   (select edcd_title_name,edcd_param_value from employee_deschange_details where edcd_emp_code =:employee_code
       and edcd_code=:deschange_code and edcd_serial=v_srl)
    connect by level < length(edcd_title_name)-length(replace(edcd_title_name,'|',''))
    Order by length(substr(edcd_title_name,
      instr (edcd_title_name, '|', 1, level)+1,
      instr (edcd_title_name, '|', 1, level+1) - instr (edcd_title_name, '|', 1, level) -1));
    TYpe cur_ref_type is ref cursor;
    cur_ref cur_ref_type;
    begin
      open cur_edcd ;
      loop
      fetch cur_edcd into v_part1,v_part2,v_srl;
      if cur_edcd%found then
            open cur_param_value;
            loop
            fetch cur_param_value into v_title,v_title_value;
            if cur_param_value%found then
                      V_part1=replace(v_part1,v_title,v_title_value);
                      V_part2=replace(v_part2,v_title,v_title_value);
            end if;
            exit when cur_param_value%notfound;
            end loop;
      end if;     
      exit when cur_edcd%notfound;
      end loop;
      close cur_param_value;
      close cur_edcd;
      open cur_ref for (select v_part1,v_part2 from dual);
      return(cur_ref);
    end;Thanks,
    Rincy
    Edited by: Rincy Binu on Jul 4, 2010 1:00 PM
    Edited by: Rincy Binu on Jul 4, 2010 1:01 PM

  • Attempt to access external website keeps getting grabbed by SBS 2003

    Hi folks,
    I have an old SBS 2003 server that recently switched their external web hosts. They are configured with the same FQDN for both their active directory domain and their public domain (westsidebaby.org). I went into DNS on the SBS server to simply update the
    WWW record and the Windows DNS equivalent of the domain @ record. Now when any internal network user tries to access the website, they get the Welcome to Small Business Server 2003 page on the local IIS. External users can get to the website no problem.
    There is also an A record for partners.westsidebaby.org in the internal DNS that points to their old web server and that resolves just FINE. NSLOOKUP from both the server and internal clients to the local DNS server give me the correct external address.
    Pinging www.westsidebaby.org from the local subnet resolves correctly as well. I have done ipconfig /flushdns on the server, as well as the clients I am testing, flushed/deleted/cleared the caches and browsing histories from the various browsers (IE, Chrome
    and Firefox), all in very logical, intentional order before attempting to type the addy.
    If I change a client's DNS server to an external source, I can resolve to the new website just fine. Just can't access AD or server shares any more. Ugh.
    No matter what I seem to do, barring resolving through an outside DNS server, typing www.westsidebaby.org from inside still gives me the dang SBS page. I have also setup a HOSTS file to no avail. OMG, I am FIT TO SPIT. Any ideas?

    Hi,
    This is happening because of DNS misconfiguration. Try and stop Default Website as a test and browse the site. Also check if there is a host header on Default website pointing to westsidebaby.org
    Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd - Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Cant join PC to domain and not able to send emails

    Hi
    I'm having a few issues with a SBS 2011 Standard server. To give you a setup overview
    Server x1 (SBS 2011)
    Workstations x6 (4 running Windows 7 Pro and 2 running Windows 8.1 Pro)
    The server is used as domain controller and exchange. It doesn't host the web domain - emails are directed via a pop3 connector to exchange accounts
    Main use for server is file sharing, domain control and exchange
    The server and workstations connect into 8 way Ethernet switch
    This switch is then connected in BT 2wire business hub
    The LAN ran from 192.168.0.69 (server) to .70, .71 etc while BT hub was 192.168.0.253
    OK now the problem.
    Everything was setup and working fine until BT decided to block the IP from web.  BT said to factory restart the hub which we did. This fixed the internet to hub but screwed up the LAN. The new hub IP was 192.168.1.254 so the LAN was moved from 192.168.0.x
    to 192.168.1.x
    The first issue I am having is that I cant join a new pc that was rebuilt to the network. I have tried joining via right clicking my computer and changing domain, but when I enter in the domain and admin password it says it cant find the domain?
    I then tried the http://connect but that just loaded a blank page. I'm struggling as to how to connect this pc now. I tried to change the DNS on pc to the server LAN address but that didnt work either. I'm not sure if the domain controller is working or
    if its another issue?ow.
    Also on the pcs that are still connected, every time they login the mapped drives to the server dont open. the user has to try to open the drive and then enter in their username and password to open the drive. The drives are all shared correctly and this
    is only happening now.
    The 2nd issue I have is unclear as if its still a BT issue or not, but when a user tries to send an email the get an instant bounce back saying
    COL004-MC1F51.hotmail.com gave this error: OU-002 (COL004-MC1F51) Unfortunately, messages from 86.XXX.92.XX weren't sent. Please contact your Internet service provider since
    part of their network is on our block list.
    This happens on a number of emails not just hotmail
    When I checked that IP on the spam networks it had no record of it being blocked.the server has internet access ok and can receive emails fine, just not send them.
    I dont know it both issues or connected or not.
    would anyone have any ideas on what to try? first issue is getting this pc on the network. have been told that it needs all sorting for Monday morn, so any quick advice would be great.
    thanks for any input

    Hi,
    Could you please share the IP Address of the server ?
    Make sure the server is set to Static IP Address. With one NIC card enabled. DNS IP should be pointing to the server IP itself.
    On Client machine assign an IP address and make sure the DNS is set to Servers IP Address.
    Once that is done , Try to ping the server.
    Also ping connect from the client machine , Connect should show servers ip address.
    Keep me posted.
    Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd

  • How to Change the data type of infoobject from NUMC to CHAR

    Hi Experts,
    I have created an infoobject with data type as NUMC, i used in DSO as a key figure and i have loaded data up to PSA.
    Now i want to change the data type of this Info Object from NUMC to CHAR.
    Can anyone suggest me the solution for this issue.
    Regards,
    Venu Gopal.K

    Hi pavan/binu,
    I have not loaded data into DSO i just added IO in Key fields and i started editing this IO then im facing error like
    1.Master Data Table /BIC/PZCUSTOMER contains data: Characteristic ZCUSTOMER cannot be activated     
    2.SID Table /BIC/SZCUSTOMER contains data: Characteristic ZCUSTOMER cannot be activated
    Im also unable to edit the P & S tables in SE14.
    NOTE:I have data only in PSA and when im trying to load data to DSO Im facing these issues.

  • Adobe AIR 4 Not reading a XML file larger than 10MB

    I have an application where the XML file could be over 10MB in size. I am using XMLHttpRequest to read the file in. However, on Air 4, it results in null when the file is greater than 10MB in size. This was working until I updated to AIR 4. I can go back to a previous version of AIR and the loading of large file works.
    xml = new XMLHttpRequest( );
    xml.onreadystatechange = function( ){
        if( xml.readyState == 4 && xml.status == 200){
      b[language] = xml.responseXML.documentElement; //Results in NULL when file size is greater than 10MB
            var tempTxt = "Loaded Database";
    xml.open( "GET", file.url, false);
    xml.send( null );
    Why AIR limited the file size and any work around for this? The Request processes fine and readyState will become 4. However, xml.responseXML.documentElement will respond with a NULL.
    Thank you
    Binu
    www.verseview.info

    It's difficult to tell what it is, it looks like a binary
    pipe symbol but I can copy it from TextPad for example. Some of the
    characters following it cannot be copied from TextPad which I
    assume is because it's null. I can read the whole file in C#/.Net
    and assign it to a string variable without any problems but perhaps
    Air is somewhat limited to binary content.

  • Error while deploying ear in weblogic 9.1

    im getting the following error while deploying my ear created using ant script in weblogic 9.1.
    pls help me
    <May 2, 2006 8:14:42 PM IST> <Error> <J2EE Deployment SPI> <BEA-260101> <Parameter may not be null.
    java.lang.NullPointerException
         at weblogic.deploy.api.internal.utils.ConfigHelper.checkParam(ConfigHelper.java:142)
         at weblogic.deploy.api.tools.ModuleInfo.createModuleInfo(ModuleInfo.java:82)
         at weblogic.deploy.api.tools.SessionHelper.getModuleInfo(SessionHelper.java:607)
         at com.bea.console.actions.app.install.Flow.appSelected(Flow.java:453)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         Truncated. see log file for complete stacktrace
    >
    **********************

    Hi Binu,
    Was the ear file built using WLS 9.1 ant scripts ?
    Thanks
    Raj

  • Problem connecting to MS Exchange 2007 on SBS 2008

    I am having problems connecting to Exchange via cfexchangeconnection. Our ColdFusion environment is CF9 Enterprise on Win 2008, and the Exchange host is Win SBS 2008 (which uses IIS7).
    After having worked through the documentation and following all procedures outlined at
    http://help.adobe.com/en_US/ColdFusion/9.0/Developing/WSc3ff6d0ea77859461172e0811cbec14f31 -7fed.html
    plus googling intensively, we have the following method to test the connection
    <cfexchangeconnection action="open"
             connection="thisExchangeConnection"
             server="portal.mydomain.com"
             protocol="https"       
             formBasedAuthentication="true"
             formBasedAuthenticationURL="https://portal.mydomain.com/owa/auth/owaauth.dll"
             mailboxname="myMailBox"       
             username="myUsername"
             password="myPassword" />
    <cfdump var="#thisExchangeConnection#">
    <cfexchangeconnection action="close"
             connection="thisExchangeConnection" />
    The IIS7 implementation in SBS 2008 is quite a lot different to Win 2008, so there are some question marks around some steps in the above documentation. However, we have made sure that:-
    1) you can use the credentials above to login via a web browser
    2) WebDav is on in IIS
    3) there is no IWA and forms based authentication is on
    4) certificates are installed correctly on both the CF and Exchange servers
    5) the myUsernameaccount has correct permissions in iis/owa/exchange
    Despite this, the net result is always
    Access to the Exchange server denied. 
    Ensure that the user name and password are correct.
    From research it seems that a lot of people have issues where the underlying problem is actually an Exchange 440 timeout error where the password in the IUSR_<servername> and IWAM_<servername> (IIS/Active Directory) is out of sync.
    I was pinning my hopes on the above being the problem but now I find that in SBS 2008 there is no IWAM_<servername> server account.
    All this leads me to ask is SBS 2008 actually compatible with the cfexchange tags in CF9? There is nothing in the documentation that I can find that syays that it isn't, but given the amount of time we've spent on what should be straightforward I am wondering if we are on a hiding to nothing. Anyone from Adobe care to comment?
    If anyone has managed to get this to work specifically with SBS 2008, or has any advice I'd be grateful to here from you.

    Hi,
    As said by Sneff , I would also recommend to enable Logging to get more detailed information. Also follow
    Configuration of POP/IMAP on SBS 2008 Refer to :
    http://blogs.technet.com/b/sbs/archive/2008/09/19/how-to-configure-sbs-2008-to-host-pop3-imap4.aspx
    http://blogs.technet.com/b/sbs/archive/2011/08/31/how-to-configure-outlook-for-pop3-imap-and-smtp-connectivity-in-sbs-2008-2011-standard.aspx
    As per the error code, you need to follow
    http://support.microsoft.com/kb/813514/EN-US
    I would also disable AV on both Client machine and TEST , including the Filters of AV.
    Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd - Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Error while applying leave request though poratl

    Hi All,
    In portal Employee is unable to apply any leave. The system is giving the error message as
    "As per policy, Casual Leave cannot be taken for more than 1 working day consecutively,
    Please utilise Privilege leave for this purpose. In case you do not have Sufficient PL balance, Please apply for LOA."
    But when trying to raise a "Privilege/ Sick" leave , he is still getting  the same message.
    So he is not able to raise any kind of leave.
    So can anyone please suggest a solution.
    Regards,
    Muni.

    Hi Binu,
    It is a Std error which you r getting in the system while maintaining EL on that day. Is 07.03.2012 is a paid holiday ?? Then it will give the same error while applying the leave on that day...
    You need to check the Holiday class for that abs type in the system.
    Regards,
    Prasad Lad

  • VPN no longer working after moving DHCP server to router

    I am preparing my SBS 2008 environment for migration to Server 2012 R2 Essentials.  I moved the DHCP server to the router (a Netgear R7000 with standard firmware).  I am able to access RWW and CompanyWeb via the router from external locations. 
    With the VPN, however, I can only connect but cannot access any network resource (including file shares).  The VPN is supported by the SBS server with RRAS.  I didn't change any of the configuration because I didn't think any of it needed to be changed.  The
    router just needs to get it's reservations from a different DHCP server, right?  Anyway, would appreciate if someone can shed some light on what's going on here.
    JeHarry

    Hello JeHarry,
    I would recommend you to follow the TechNet to migrate SBS 2008 to 2012 R2 Essentials. Don't skip any part.
    https://technet.microsoft.com/en-us/library/jj200141.aspx
    Troubleshooting VPN Issues on 2012
    http://blogs.technet.com/b/sbs/archive/2014/06/11/troubleshooting-common-vpn-issues-on-windows-server-2012-r2-essentials.aspx
    Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd - Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • VPN no longer working

    Upgrading to Lion server has been a bit frustrating to say the least!
    I had VPN working and with the upgrade it has stopped. I hope someone can help with my setup. It has worked before.
    Here is my setup.
    I have an internet router provided by my ISP. The firewall is turned off, but I have Ipsec passthrough enabled.
    Apple Airport extreme in bridge-mode to which my server is connected by ethernet and other clients by wireless.
    Server firewall is turned on with the vpn ports open via Server Admin app
    vpn service activated.
    user is setup for vpn service
    This setup has worked before the upgrade.
    With the firewall on or off, I get the same error message: vpn server did not respond. I am testing this from my iphone's 3G connection which has worked before, so it is not my carrier's problem.
    Somehow I suspect my server has a firewall problem.
    Another problem I have since the upgrade and which may be related to this issue is that I can no longer use airplay to stream music from my server to an airport express with the firewall enabled. When it is turned off, the server streams music without a hitch. I have opened all the ports for airplay to work, have ticked them, unticked them and reticked them, but to no avail.
    This last problem has led me to think that the vpn issue is a firewall issue has the ports seem open, just as the airplay ports seem open, but are apparently not.
    Can any one offer any help with this?
    Thanks for your time.
    jeff

    Hello JeHarry,
    I would recommend you to follow the TechNet to migrate SBS 2008 to 2012 R2 Essentials. Don't skip any part.
    https://technet.microsoft.com/en-us/library/jj200141.aspx
    Troubleshooting VPN Issues on 2012
    http://blogs.technet.com/b/sbs/archive/2014/06/11/troubleshooting-common-vpn-issues-on-windows-server-2012-r2-essentials.aspx
    Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd - Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Maybe you are looking for