Bio seting on KT4v help me!!!

Ok y have Athlon xp 17oo+. at Advansed Bios features the internal cache option is write-back and disable not disable and enable. What is write-back? si the same as enable option?

discovery listener is called in d program....so modify the code

Similar Messages

Virus 'flagged' file in Windows 7 Bios Update...HELP !!

I just finished updating some Windows 7 Bios files....one of the files: C:\PROGRAM FILES\LENOVO\SYSTEM UPDATE\UNCSERVER.EXE" was flagged as Malware by my AVG Virus program and I put it in the Virus Vault.
Then the installation of that update showed it couldn't find that flagged file and so cancelled that update.
I continued on with the other updates and installed them, BUT I wonder if that file is really Malware and whether to restore it and try that update again.
I don't want to infect my computer with a virus, but I wonder if a Windows Update would contain a contaminated file...
HELP !!!

Hello,
You did not say what version of the signature database is being used by your antivirus software, or the name of the threat it detected, so it is difficult to tell for certain, but I uploaded the UNCSERVER.EXE file from my ThinkPad W510 to VirusTotal, a multi-engine virus scanning service, and it reported the file as being clean. Report here.
I suspect it is a false positive alarm, but you should check with your antivirus vendor's own technical support department to confirm.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Satellite Pro L300-EZ1004X - TouchPad stopped working, BIOS update does not help

I have a Satellite Pro L300-EZ1004X laptop. Few days ago TouchPad stopped working. This is not a Fn + F9 issue.
In Device Manager it looks like hidden device and has (!) on it. Re-installing Synaptics drivers, updating them, removing the device in Safe Mode - nothing works. (TouchPad did not work in Safe Mode). One of the forums mentioned BIOS update. For some strange reason the latest BIOS for this specific laptop is from 2008 (ver. 1.5). Other L300 laptops have option to update BIOS to ver. 2.20 (2010) but not mine! I tried to load it (ver. 2.20)from Windows and from boot disk without success. I installed BIOS ver. 1.5. After reboot - keyboard stop working! And TouchPad ... still dead and still appears as hidden device. Using external mouse I restarted the laptop and get into the BIOS settings. In Advanced Settings disabled TouchPad completely. KEYBOARD START WORKING IN WINDOWS!!!
Any suggestions on how to make this TouchPad to work? Or how to get newer BIOS for this Laptop?
Thank you in advance!

Sounds like it has died, you can purchase a new one from a parts supplier and pay someone to install it or if you are any good with such things you can try to do it yourself. I suggest just sticking with the external mouse.
Welcome to the Toshiba user forums.
For those of you who do not know what a user forum is, it is a community of users who volunteer time to help other users. Anyone can participate. It's 100% voluntary.
Being super active is never a requirement

Bios update? overclock help?

hey guys! i need some help with and if its posible to overclock my intel CPU and card.First some system info: Windows 8.1 64Bitsintel Core i7- 3632QM 2,2 Ghz(gets to 3,2Ghz in turbo boost)8GB DDR3 memory 789Ghz3GB SDHC Readyboost CardHP 1842 U3E1 Motherboard2 GB intel HD grafics 4000 650Ghz Core speed 800Ghz memory speed1GB ATI AMD Radeon HD 7600M Core speed 830Ghz 1010Ghz Memory speed698GB hitach Harddisk(gona be replaced by an ssd)Bios insyde F.14 20-09-2012Extended Batterypack 83981 Mwh7,9 A AdapterALL drivers are up to date(except Bios)not a bad cooling system for a laptop. removed the dust gueards for more airflow.cleanded it out, and its standing on a platform with 5 fans. i have already overclocked one of the grafics cards.this is the AMD Radeon 7600m series core speed was 600Ghz memory 900Ghz.ist now set at 830Ghz and 1010Ghz its can go a lot higher but the grafics card crashes, i know it is a unstable overclock if it chrases but can i somehow get the clocks higher without crashing the drivers? so my questions are: -can i update my bios and how(never did this before)-can i increase the processor speed? i can increase the voltage going to the turbo boost mode with intel extreme tuning utility-can i overclock the intel grafic card?-how do i stop amd grafic card chraches? core speed goes all the way up to 900Ghz only thing is the card driver crashes. but no wreid things are displeyed on the screen.-can i increase the voltage to the cards?-can i increase the ram Ghz thanks for the time already and i hope u guys can help me!

Quote from: steffen.agermann1989 on 23-January-15, 08:40:53
Hi soo i have a GT702 PE gtx880m and a 4810mq an currently im stuck on bios 50v and i want to update to 717 but i tried everything and its not working either way
i can flash from 50v to 517 that goes but i cant go any further if i try the laptop only turns on and off alot then boot back into windows logon screen
what am i doing wrong?? hope anyone got a clue i have plans for updating to the latest gtx980m and i realy need that bios update fast :/
If i can get a update order or an explanation how to do it it woud be awesome
man dont do anything with that 717 because your system non raid.am i right?

Windows7 64 bit BSOD on windows after disabling Bios APS? Please Help.

Thermaltake Soprano New 2013 design
XFX 850 XXX modular PSU
MSI 990FXA GD80 Mainboard
AMD FX X6 6300 Stock cooler Temps with smart fan control idle around 18% to 42% Load
8Gb Corsair Dominator 1333 DDR3
MSI Radeon 6890 Hawk
Creative Xfi Fatality Champion
1x Maxtor 320gb hdd Win7 32bit
1x Samsung 1tb hdd
2x Samsung 2tb hdd Win7 64bit
1x Seagate 3tb hdd
1x Sony Optiarc 24x optical drive
The problem I am having is regarding making adjustments in the UEFI bios and finding that often on reboot I end up with a BSOD that continues until I reset to last good configuration when everything seems to work normally again. most recently this evening I disabled APS on my CPU and on my ram as I felt it was slowing my computer down after using it. I rebooted and there it was the BSOD again. I have my drives set on IDE and the on-board sound disabled as I am using my own soundcard. Other than that I am running everything by default.
I hate the instability of using the bios on this board. I was previously running with the 79fx-GD70 and never had these issues in the same way, having said that I have only recently moved over to 64bit Windows 7 and was a consistent 32bit user of the OS instead.
Any help on this matter would be greatly appreciated.
Many Thanks

Thermaltake Soprano New 2013 design
XFX 850 XXX modular PSU
MSI 990FXA GD80 Mainboard
AMD FX X6 6300 Stock cooler Temps with smart fan control idle around 18% to 42% Load
8Gb Corsair Dominator 1333 DDR3 + Airflow Cooler
MSI Radeon 6890 Hawk
Creative Xfi Fatality Champion
1x Maxtor 320gb hdd Win7 32bit
1x Samsung 1tb hdd
2x Samsung 2tb hdd Win7 64bit
1x Seagate 3tb hdd
1x Sony Optiarc 24x optical drive
Hi,
I've now discovered the reason for the BSOD issues. When I built this computer up a couple or so weeks ago, I transferred my Windows 7 drives from my old 790fx GD80 system. They transferred smoothly, but every time I tried to use AHCI & AHCI in the bios and reboot the BSOD would occur. I now know that if Windows 7 drives are installed without doing a clean install they "Do Not" automatically set AHCI, this has to be set in the registry first then set in the bios. I have now sorted this out and I no longer get BSOD with AHCI & APS and it is solved without any further issues.
Many thanks for all suggestions,

Change bios seting in dv6

hi
how can i change bios setin in dv6 6070?
i want install windows server 2008 r2 64 bit in vmware , but has on eror "enable bios vt option".
what is it and where is it ?
tnx

Hi ofr, welcome to the HP Forums. The 'vt' from your error message, is the Intel Virtualization Technology. Simply put, it is technology that improves performance over software based virtualization, and a requirement for Windows Server 2008 R2. Here is a more elaborate description from the source: Hardware-Assisted Virtualization Technology
To see if the option is available, you will need to enter your BIOS. Turn on or restart the computer.
While the display is blank, press the f10 key to enter the BIOS settings menu.
Here is an article that will show you what it MIGHT look like: How to Enable Intel Virtualization Technology (vt-x)
I hope this helps.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

I have a laptop notebook hp compaq 6735b bios passwort administrator help me

he has a problem in the BIOS administrator password and I pray you to tell how the leaves, but not just from the cd let the jet only boot that can formatting pc or qi is possible to give me a list of how len passwortat company for laptop hp administrator passworts. please help me

HI there
Only way to remove BIOS password in those notebooks is to exchange mainboard.
This is business laptop, sorry.
Click on KUDOS icon if helped

W520 won't boot. Can't even get to the BIOS .... help!

I have a 2 months old W520 factory settings. It has been acting up lately when powering up but after holding down the power button for 10 sec or so it would always start. However, that is not even working today.
I took out the battery and plugged it in AC and tried to no avail. I also tried powering it up with battery alone and neither seems to work. So I can't turn on the **bleep** machine now to even see what version the bios is or anything for that matter. Please help .... thanks!
Solved!
Go to Solution.

Hi, J,
    I feel your pain.
     It may be your system board is blooey, but we can try a few things before going to your local authorized Lenovo service center - or you may want to head over there right now:
Lenovo Warranty Service Locally
    I had a minor warranty issue recently and a local provider turned my machine around in two hours (after the parts came in).
If you want to mess around:
    Are you sure your power supply is ok? Is your battery charged?
    Have you tried unplugging everything from your machine (except for the AC adapter), including removing the disk drive, any usb devices etc.?
    Is your laptop screen completely dead? If so, you might try plugging in an external monitor, just to check.
    After that, you may also want to remove the keyboard, take out the backup battery, main battery etc and disconnect the AC overnight.
    Let me know how you fare.
                                                                           ZZ

BIOS V1.6 Overclocking help pls!

Hi guys
I have a 875P Neo-FIS2R and since I upgraded my bios to V1.6 I have found the FSB of my P4 has been overclocked to 203Mhz from the standard 200Mhz. :(
I have also found that my graphics card has been overclocked. (A Geforce4 ti 4400 and the core is overclocked close to a Geforce4 ti 4600).
I can fix the FSB with core cell back to 200Mhz but this only lasts until the next restart. I have not found a way to fix the GPU ocing.
Btw I set the bios voltage of the AGP at 1.55V but on core cell it is always set to 1.6V when I reboot.
Has anyone else experienced this problem and does anyone know how to fix this problem or do we have to wait till the next bios is out (V1.7?)
Thanks for you help. :D

Hi ppl )
I no this is an old post but I know a few of us still have the problem of our GCs overclocked as well as our FSBs overclocked to 203Mhz by the new bios V1.6.
I have since e-mailed MSI technical support with this letter:
"Hello
I have recently purchased a 3Ghz 800Mhz FSB Pentium 4 and a MSI Neo2-FIS2R 875P motherboard. I noticed that when using core cell the FSB was automatically overclocked to 203MHz each time I loaded up. As I do not wish to overclock at the moment I turned the FSB down using the "-" button then pressed OK and then saved. Core cell would then read the correct 3Ghz (no overclocking).
However I found the P4 overclocked again after I restarted the next time. So I did the exact same with corecell and lowered the FSB to 200Mhz exactly so that it wasnt overclocked. I was sure I saved this setting with corecell and then I uninstalled core cell so it could no longer change this FSB setting.
However when I rebooted and checked the speed with the "Intel frequency ID Utility" the FSB was said to be 811Mhz so it was in fact 203Mhz again. I checked the CPU BUS CLOCK in the bios and it is set to 200Mhz. I then tried the default setting of 201Mhz with corecell with the same result after rebooting.
So basically how can I prevent this overclocking happening automatically. I have a MSI Neo2-FIS2R with a 875P chipset and bios version 1.6? I dont want to overclock because I want to keep the Intel P4 warrenty.
Another question: Does that MAT function that is available in V1.6 affect the Processor at all or only the RAM and will it void the warrenty of the P4 if run? It is currently set to SLOW."
soz for the long read but had to get everything in.
Now for the interesting part 8)
THIS IS MSI TECH SUPPORTS REPLY!!!!!:
"Dear Sir/Madam,
Thank you for contacting MSI Technical Support.
There will be tolerance difference when the softwares detect the clock.
It's normal. It won't cause reliability nor stability problem.
Please feel free to let us know if you still have any further problem.
Best regards,
MSI Technical Support"
8o 8o 8o
Is anyone else shocked 8o by this response because MSI seems to be overclocking "cheating" and are happy to say that is only a tolerance in the clock meanwhile so many other users have experienced this as well so it definately isnt a tolerance difference.
Thanks would like your views on the matter
SAspaz

I7 920 American Megatrends Bios XPS 730x OVERCLOCK HELP please

I am a first time overclocker, I have spent countless hours online reading about how to do it, still cant find American Megatrends Bios as an example. Can anyone help me to overclock my system to a safe stable speed 3.6 or 3.8 maybe?
Any help here is appreciated, respectfully Offsmack
I have an XPS 730x
i7 920 266 ghz
vista home premium
memory 6gb 1066 MHZ DDR3 3DIMM
hard drive 640gb
video crossfire ATI Radeon 4800 x2
not sure of my motherboard Dell 'thought' it was Tylersburg ATX ?
my email is [email protected]
Brian Leupold www.leupold.com we make SCOPES!

Hi offsmack. As the forum is for users of MSI products, I don't see any specific MSI hardware in your post. The moderators will probably lock this thread.

Bios reset 1151nr NEED HELP BEGGING YOU!

I have a hp 1151nr mini notebook my friend gave me because it had a broken screen that i didnt do anything about for 2 years. I finally ordered a new screen got it up and running but there's a bios pass i cannot reset nor does he remember, its been so long. can anyone help me reset this?
the hault code is CNU9276JDD
Please i need this reset! Thanks in advance.
This question was solved.
View Solution.

Hi,
Try entering: e9lo7xgwtt ( Note that the 3rd character is a lower case L )
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Bios not booting PLZ HELP

ok my friend brang over his toshiba A100 LE1 laptophe told me it was password locked i assumed it was just an xp password to recover, but it turned out his bios pasword was no longer working so i started reading and thought there would just be a jumper to clear the bios memory and some guy told me i had to pop the memory out and peel back the mylar layer under it and jump the solder connector marked PAD500 so i did that now when i turn on the computer it lights up like its gonna work and then befor you see anything from the bios it shuts off and the just loops like that over and over CRY is just a paper wieght now or can this be fixed????i havnt even told the kid yet what i have done and feel bad I WISH I NEVER DID ANYTHING TO IT SUN OF A GUN
PLZ PLZ PLZ HELP
Solved!
Go to Solution.

well i fixewd it turns out i did every thing correctly eccept the ram dont like to go i his computer all the way so i just wasnt getting the ram in all the way and the computer wouldnt boot haha
[admin edit of pw removal info]
Message Edited by jim on 02-09-2009 12:09 AM

T61 doesn't turn on after BIOS upgrade! PLEASE HELP!

Hi all,
I just reinstalled XP on my 4 months old T61 and installed Lenovo's System Update thing. There was an BIOS update option there, so I selected it. It downloaded it and then done the upgrade - there were no errors, everything was smooth. All was fine. At least it looked that way. I rebooted it. It hanged on the boot screen (at POST). So I tried to reboot it or turn it off - there was no way to do it - the keyboard was not responding, tried pressing the power button for like a minute, but nothing. It was frozen on the bootscreen logo. So I removed the power plug and then the battery to cut the power and turn it off.
I inserted the battery and the power plug back... and... IT DOESN'T TURN ON ANYMORE. Not only it will not respond to me clicking the power button, but also the light on the backside of the lid doesn't light up when I plug in the power supply. What the hell happened? What should I do?
I tried removing the RAM and replacing it, cause I had a spare stick, but, as I thought it didn't do anything.
Is it possible that the power circuit inside T61 was somehow damaged when I removed the battery when the computer was running?
Some more info:
The battery was fully charged when flashing, I was on the AC and the BIOS version was selected automatically via Lenovo System Update.
I know how to flash BIOSes, I did it like a hundred times in my life already, even hex-hacked one on a very old PC. Never had any problems.
This is the BIOS I upgraded to:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67988
My T61's model is: 6465-CTO
OMG I'm so desperate right now.
Please HELP! I don't know what should I do!
And to top it off, I don't know if my warranty is going to be any good in Poland (see thread: http://forum.lenovo.com/lnv/board/message?board.id=Special_Interest_General&thread.id=88 )
Best regards,
NIXin

It is disturbing - Yes.
However, I have lost count of the number of BIOS or ECC updates I have made with System Update and have never ever had something go wrong. Obviously those that experience a problem are going to look for help and post in forums, it would be interesting to know how many have never had a problem?? They have no reason to post.
You wrote; "bricks their Txx about once a week", how many ThinkPads are sold per week? It is guaranteed to be an absolute nightmare for the owner, quite understandably, but if I was paranoid I wouldn't drive my car to work - I might have an accident.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Problems during BIOS upgrade - three beeps - help!

Hi.
Helping on a old neighbour computer. Catastrophe.
HP Pavilion P6122f PC.
The computer could not boot.
Decided to try a BIOS upgrade, from 5.11 to 5.22
Computer freezes during upgrade.
Now can't restart, can't access the BIOS, all i hear are three short beeps.
which means: Unable to start flashing (such as when missing a utility or BIOS image)
I really really need to fix this, my neighbour is not rich by any means. I can i reset the BIOS?

Hi Fred,
Try clearing the CMOS and see if you get lucky.
The motherboard in that PC has a long not so good history.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Bios chip for KT4V, 6712, V1.0

Hello, does anyone know where i can buy a new bios chip for the 6712?? yesterday i killed my bios (did something wrong with flashing i think, but dunno what went wrong).

thank you for the quick reply. i found someone in the Netherlands on that sit who can help me.

Bio seting on KT4v help me!!!

Similar Messages

Maybe you are looking for