Biobench 1.2. Keeps stopping whilst in logging mode.

It seems that Biobench v1.2 keeps randomly stopping whilst acquiring data in the logging mode; i.e. the display freezes. I am monitoring skin resistance and heartrate at 50Hz. This did not occur in v1.0. I am using a Daqpad1200 connected to an NT 300MHz PC. Can anybody throw any light on this problem?
ChrisM.

Sarah,
More details as requested:
1.System has WinNT v4.0 SP4, 128MB RAM. Intel Graphics Accelerator with 10MB video RAM. Monitor is CTX 17", 800x600 True colour at 70Hz. System paging size is 300MB.
I am displaying 3 channels, graph speed 20secs, sample rate 50Hz. There are no error messages, the STOP button can still be used i.e. the RUN mode still seems to be invoked. Other programs "in use" are Simeon mail system (v4.1.5) Sophos anti-virus Intercheck Monitor (v2.0). NI MAX configuration utility is v2.1.
The graphs sometimes display with no problem, other times they may stop after 2 minutes or so. This problem has been reported by another user also using a different PC and hardware. Software is again Biobench v1.2 with only Sophos running in the backgro
und.

Similar Messages

  • When I atempt to send a web site via an email from FF, the system keeps opening one new mozalla screen after another. Nothing will stop this but logging off. I have to bookmark everything and then put it in an email. Your help is appreciated.

    If I attempt to send a link to someone from a site I am visiting, ff starts opening one new start window after another. So fast i can't get it stopped. Even going into taskmaster which I sometimes have to try 3 or 4 times, it is impossible to get them all stopped they just keep multiplying. Only logging off or a restart will fix the problem.
    The same think happens if I use a "send picture to". I don't know what else to do. I have run all the diagnostics I have. Checked all the drives, etc. Check all the ff settings. Nothing shows.

    http://support.mozilla.com/en-US/kb/Managing+file+types
    Don't set Firefox for '''mailto'''. <br />
    http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

  • Mail Service Keeps Stopping For No Reason

    Hi There everyone. Over the past few days my Mail Service keeps stopping. Not giving any particular error, the only clue is this log message:-
    Jan 6 13:12:39 server master[371]: exiting on SIGTERM/SIGINT
    Is that helpful? I can start the service again and it seems OK... for a few hours then it stops again.
    I have tried, reconstructing and repairing until I am blue in the face. Any other suggestions please? Thanks in advance.

    I have just had the same thing happend again today with this in the log file:-
    Jan 12 08:52:53 server imap[1413]: AOD: user options: no lookup required for: paul
    Jan 12 08:52:53 server imap[1413]: login: localhost [::1] paul plaintext user logged in
    Jan 12 08:52:53 server imap[1413]: quota set to "unlimited" for mailbox user.paul
    Jan 12 08:52:53 server imap[1413]: open: user paul opened INBOX
    Jan 12 08:52:53 server imap[1413]: accepted connection
    Jan 12 08:52:53 server imap[1413]: AOD: user options: no lookup required for: paul
    Jan 12 08:52:53 server imap[1413]: login: localhost [::1] paul plaintext user logged in
    Jan 12 08:52:53 server imap[1413]: quota set to "unlimited" for mailbox user.paul
    Jan 12 08:52:53 server imap[1413]: open: user paul opened INBOX
    Jan 12 08:52:53: --- last message repeated 2 times ---
    Jan 12 08:52:53 server imap[1413]: SQUAT failed to open index file
    Jan 12 08:52:53 server imap[1413]: SQUAT failed
    Jan 12 08:53:07 server master[367]: process 1399 exited, status 0
    Jan 12 08:54:21 server master[367]: process 1413 exited, status 0
    Jan 12 09:02:07 server master[51]: getrlimit: max processes limit set to cur=2068 max=2068
    Jan 12 09:02:07 server master[51]: process started
    Jan 12 09:02:08 server master[177]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
    Jan 12 09:02:12 server ctl_cyrusdb[177]: verifying cyrus databases
    Jan 12 09:02:14 server ctl_cyrusdb[177]: skiplist: recovered /var/imap/mailboxes.db (15 records, 2784 bytes) in 2 seconds
    Jan 12 09:02:16 server ctl_cyrusdb[177]: skiplist: recovered /var/imap/annotations.db (0 records, 144 bytes) in 2 seconds
    Jan 12 09:02:28 server master[261]: getrlimit: max processes limit set to cur=2068 max=2068
    Jan 12 09:02:29 server master[261]: process started
    Jan 12 09:02:29 server master[262]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
    Jan 12 09:03:42 server master[335]: process started
    Jan 12 09:03:42 server master[337]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
    Jan 12 09:04:00 server ctl_cyrusdb[337]: DBERROR db4: unable to join the environment
    Jan 12 09:04:15 server ctl_cyrusdb[337]: verifying cyrus databases
    Jan 12 09:04:16 server ctl_cyrusdb[337]: skiplist: recovered /var/imap/mailboxes.db (15 records, 2784 bytes) in 1 second
    Jan 12 09:04:16 server ctl_cyrusdb[337]: skiplist: recovered /var/imap/annotations.db (0 records, 144 bytes) in 0 seconds
    Jan 12 09:04:41 server master[352]: getrlimit: max processes limit set to cur=2068 max=2068
    Jan 12 09:04:41 server master[352]: process started
    Jan 12 09:04:41 server master[354]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
    Jan 12 09:04:51 server ctl_cyrusdb[354]: verifying cyrus databases
    Jan 12 09:04:51 server ctl_cyrusdb[354]: skiplist: recovered /var/imap/mailboxes.db (15 records, 2784 bytes) in 0 seconds
    Jan 12 09:04:52 server ctl_cyrusdb[354]: skiplist: recovered /var/imap/annotations.db (0 records, 144 bytes) in 1 second
    Jan 12 09:05:17 server master[387]: process started
    Jan 12 09:05:27 server master[447]: getrlimit: max processes limit set to cur=2068 max=2068
    Jan 12 09:05:27 server master[447]: process started
    Jan 12 09:05:27 server master[448]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
    Jan 12 09:05:41 server master[451]: getrlimit: max processes limit set to cur=2068 max=2068
    Jan 12 09:05:41 server master[451]: process started
    Jan 12 09:05:41 server master[452]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
    Jan 12 09:05:59 server ctl_cyrusdb[452]: DBERROR db4: unable to join the environment
    Jan 12 09:06:01 server ctl_cyrusdb[452]: verifying cyrus databases
    Jan 12 09:06:01 server ctl_cyrusdb[452]: skiplist: recovered /var/imap/mailboxes.db (15 records, 2784 bytes) in 0 seconds
    Jan 12 09:06:02 server ctl_cyrusdb[452]: skiplist: recovered /var/imap/annotations.db (0 records, 144 bytes) in 1 second
    Jan 12 09:06:21 server master[479]: getrlimit: max processes limit set to cur=2068 max=2068
    Jan 12 09:06:21 server master[479]: process started
    Jan 12 09:06:21 server master[480]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
    Jan 12 09:06:31 server master[481]: getrlimit: max processes limit set to cur=2068 max=2068
    Jan 12 09:06:42 server master[483]: getrlimit: max processes limit set to cur=2068 max=2068
    Jan 12 09:06:43 server master[483]: process started
    Jan 12 09:07:01 server ctl_cyrusdb[485]: DBERROR db4: unable to join the environment
    Jan 12 09:07:02 server ctl_cyrusdb[485]: verifying cyrus databases
    Jan 12 09:07:02 server ctl_cyrusdb[485]: skiplist: recovered /var/imap/mailboxes.db (15 records, 2784 bytes) in 0 seconds
    Jan 12 09:07:02 server ctl_cyrusdb[485]: skiplist: recovered /var/imap/annotations.db (0 records, 144 bytes) in 0 seconds
    Jan 12 09:07:28 server ctl_cyrusdb[485]: done verifying cyrus databases
    Jan 12 09:07:28 server master[497]: about to exec /usr/bin/cyrus/bin/idled
    Jan 12 09:07:29 server master[483]: Cyrus POP/IMAP Server v2.3.8 ready for work
    Jan 12 09:07:29 server master[499]: about to exec /usr/bin/cyrus/bin/ctl_cyrusdb
    Jan 12 09:07:29 server ctl_cyrusdb[499]: checkpointing cyrus databases
    Jan 12 09:07:29 server ctl_cyrusdb[499]: archiving database file: /var/imap/annotations.db
    Jan 12 09:07:29 server ctl_cyrusdb[499]: archiving log file: /var/imap/db/log.0000000001
    Jan 12 09:07:29 server ctl_cyrusdb[499]: archiving database file: /var/imap/mailboxes.db
    Jan 12 09:07:29 server ctl_cyrusdb[499]: archiving log file: /var/imap/db/log.0000000001
    Jan 12 09:07:29: --- last message repeated 1 time ---
    Jan 12 09:07:29 server ctl_cyrusdb[499]: done checkpointing cyrus databases
    Jan 12 09:07:29 server master[483]: process 499 exited, status 0
    Jan 12 09:08:16 server master[512]: about to exec /usr/bin/cyrus/bin/imapd
    Jan 12 09:08:16 server imap[512]: executed
    Jan 12 09:08:16 server imap[512]: accepted connection
    Jan 12 09:08:16 server master[513]: about to exec /usr/bin/cyrus/bin/imapd
    Jan 12 09:08:16 server imap[513]: executed
    Jan 12 09:08:16 server imap[513]: accepted connection
    Jan 12 09:08:17 server imap[512]: login: [172.16.1.99] paul plaintext user logged in
    Jan 12 09:08:17 server imap[512]: quota set to "unlimited" for mailbox user.paul
    Jan 12 09:08:17 server master[514]: about to exec /usr/bin/cyrus/bin/imapd
    Jan 12 09:08:17 server imap[513]: login: [172.16.1.99] florensis CRAM-MD5 User logged in
    Jan 12 09:08:17 server imap[513]: quota set to "unlimited" for mailbox user.florensis
    Jan 12 09:08:17 server master[515]: about to exec /usr/bin/cyrus/bin/imapd
    Jan 12 09:08:17 server imap[515]: executed
    Jan 12 09:08:17 server imap[515]: accepted connection
    Jan 12 09:08:17 server master[516]: about to exec /usr/bin/cyrus/bin/imapd
    Jan 12 09:08:17 server imap[516]: executed
    Jan 12 09:08:17 server imap[516]: accepted connection
    Jan 12 09:08:17 server imap[516]: login: [172.16.1.99] paul plaintext user logged in
    Jan 12 09:08:17 server imap[516]: quota set to "unlimited" for mailbox user.paul
    Jan 12 09:08:17 server imap[515]: login: [172.16.1.99] florensis CRAM-MD5 User logged in
    Jan 12 09:08:17 server imap[515]: quota set to "unlimited" for mailbox user.florensis
    Jan 12 09:08:17 server imap[516]: seen_db: user paul opened /var/imap/user/p/paul.seen
    Jan 12 09:08:17 server imap[516]: open: user paul opened Junk
    Jan 12 09:08:17 server imap[515]: skiplist: recovered /var/imap/user/f/florensis.seen (7 records, 14904 bytes) in 0 seconds
    Jan 12 09:08:17 server imap[515]: seen_db: user florensis opened /var/imap/user/f/florensis.seen
    Jan 12 09:08:17 server imap[516]: SQUAT failed to open index file
    Jan 12 09:08:17 server imap[515]: open: user florensis opened INBOX
    Jan 12 09:08:17 server imap[516]: SQUAT failed
    Jan 12 09:08:18 server master[517]: about to exec /usr/bin/cyrus/bin/imapd
    Jan 12 09:08:18 server imap[517]: executed
    Jan 12 09:08:18 server imap[517]: accepted connection
    Jan 12 09:08:18 server imap[517]: login: [172.16.1.99] florensis CRAM-MD5 User logged in
    Jan 12 09:08:18 server imap[517]: quota set to "unlimited" for mailbox user.florensis
    Jan 12 09:08:18 server master[518]: about to exec /usr/bin/cyrus/bin/imapd
    Jan 12 09:08:18 server imap[518]: executed
    Jan 12 09:08:18 server imap[519]: executed
    Jan 12 09:08:18 server imap[518]: SQUAT failed to open index file
    Jan 12 09:08:18 server imap[518]: SQUAT failed
    Jan 12 09:08:18 server master[520]: about to exec /usr/bin/cyrus/bin/imapd
    Jan 12 09:08:18 server imap[520]: executed
    Jan 12 09:08:18 server imap[520]: accepted connection
    Jan 12 09:08:19 server imap[516]: Expunged 7 messages from user.paul.Junk
    Jan 12 09:08:19 server imap[520]: login: [172.16.1.99] florensis CRAM-MD5 User logged in
    Jan 12 09:08:19 server imap[520]: quota set to "unlimited" for mailbox user.florensis
    Jan 12 09:08:19 server imap[517]: seen_db: user florensis opened /var/imap/user/f/florensis.seen
    Jan 12 09:08:19 server imap[517]: open: user florensis opened Junk
    Jan 12 09:08:19 server imap[517]: SQUAT failed to open index file
    Jan 12 09:08:19 server imap[517]: SQUAT failed
    Jan 12 09:08:19 server imap[519]: seen_db: user florensis opened /var/imap/user/f/florensis.seen
    Jan 12 09:08:19 server imap[519]: open: user florensis opened Apple Mail To Do
    Jan 12 09:08:19 server imap[520]: seen_db: user florensis opened /var/imap/user/f/florensis.seen
    Jan 12 09:08:19 server imap[520]: open: user florensis opened Deleted Messages
    Jan 12 09:08:19 server imap[520]: SQUAT failed to open index file
    Jan 12 09:08:19 server imap[520]: SQUAT failed
    Jan 12 09:08:20 server imap[513]: accepted connection
    Jan 12 09:08:20 server imap[513]: login: [172.16.1.99] paul plaintext user logged in
    Jan 12 09:08:20 server imap[513]: quota set to "unlimited" for mailbox user.paul
    Jan 12 09:08:20 server imap[514]: Expunged 1 messages from user.paul
    Jan 12 09:08:20 server imap[513]: seen_db: user paul opened /var/imap/user/p/paul.seen
    Jan 12 09:08:22 server imap[513]: open: user paul opened Apple Mail To Do
    Jan 12 09:08:22 server imap[516]: open: user paul opened Sent Messages
    Jan 12 09:08:22 server imap[515]: Expunged 1 messages from user.florensis
    Jan 12 09:08:23 server imap[517]: open: user florensis opened Apple Mail To Do
    Jan 12 09:08:23 server imap[518]: open: user paul opened Junk
    Jan 12 09:08:24 server imap[518]: Expunged 1 messages from user.paul.Junk
    Does this help? It then cleared itself??

  • Broadcast keeps stopping...

    We are streaming a live event with two bitrates and the stream keeps stopping.  Can anyone shed some light on this problem?  I haven't been able to find anything that causes this.  Thanks for any help that you can provide.  Here is the log file:
    Mon Nov 23 2009 10:39:37 : Selected video input device: Osprey-210 Video Device 1
    Mon Nov 23 2009 10:39:37 : Selected audio input device: Unbalanced 1 (Osprey-2X0)
    Mon Nov 23 2009 10:41:11 : Primary - Connected to FMS/3,0,1,123
    Mon Nov 23 2009 10:41:22 : Primary - Stream[AGOrlando1] Status: Success
    Mon Nov 23 2009 10:41:22 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
    Mon Nov 23 2009 10:41:22 : Primary - Stream[AGOrlando2] Status: Success
    Mon Nov 23 2009 10:41:23 : Primary - Stream[AGOrlando2] Status: NetStream.Publish.Start
    Mon Nov 23 2009 10:41:23 : Session Started
    Mon Nov 23 2009 10:41:23 : Video Encoding Started
    Mon Nov 23 2009 10:41:23 : Audio Encoding Started
    Mon Nov 23 2009 10:42:10 : Audio Encoding Stopped
    Mon Nov 23 2009 10:42:10 : Video Encoding Stopped
    Mon Nov 23 2009 10:42:10 : Session Stopped
    Mon Nov 23 2009 10:42:10 : Primary - Stream[AGOrlando1] Status: NetStream.Unpublish.Success
    Mon Nov 23 2009 10:42:11 : Primary - Stream[AGOrlando2] Status: NetStream.Unpublish.Success
    Mon Nov 23 2009 10:46:44 : Primary - Stream[AGOrlando1] Status: Success
    Mon Nov 23 2009 10:46:44 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
    Mon Nov 23 2009 10:46:44 : Primary - Stream[AGOrlando2] Status: Success
    Mon Nov 23 2009 10:46:44 : Primary - Stream[AGOrlando2] Status: NetStream.Publish.Start
    Mon Nov 23 2009 10:46:44 : Session Started
    Mon Nov 23 2009 10:46:45 : Video Encoding Started
    Mon Nov 23 2009 10:46:45 : Audio Encoding Started
    Mon Nov 23 2009 11:08:07 : Primary - Network Status: NetConnection.Connect.Closed status
    Mon Nov 23 2009 11:08:17 : Primary - Disconnected
    Mon Nov 23 2009 11:08:20 : Primary - Re-establishing connection, attempt 1
    Mon Nov 23 2009 11:08:21 : Primary - Reconnected to FMS/3,0,1,123
    Mon Nov 23 2009 11:08:21 : Primary - Stream[AGOrlando1] Status: Success
    Mon Nov 23 2009 11:08:21 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
    Mon Nov 23 2009 11:08:21 : Primary - Stream[AGOrlando2] Status: Success
    Mon Nov 23 2009 11:08:22 : Primary - Stream[AGOrlando2] Status: NetStream.Publish.Start
    Mon Nov 23 2009 11:22:45 : Primary - Network Status: NetConnection.Connect.Closed status
    Mon Nov 23 2009 11:22:55 : Primary - Disconnected
    Mon Nov 23 2009 11:22:55 : Primary - Re-establishing connection, attempt 1
    Mon Nov 23 2009 11:22:55 : Primary - Reconnected to FMS/3,0,1,123
    Mon Nov 23 2009 11:22:56 : Primary - Stream[AGOrlando1] Status: Success
    Mon Nov 23 2009 11:22:56 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
    Mon Nov 23 2009 11:22:56 : Primary - Stream[AGOrlando2] Status: Success
    Mon Nov 23 2009 11:22:56 : Primary - Stream[AGOrlando2] Status: NetStream.Publish.Start
    Mon Nov 23 2009 11:26:49 : Audio Encoding Stopped
    Mon Nov 23 2009 11:26:49 : Video Encoding Stopped
    Mon Nov 23 2009 11:26:49 : Session Stopped
    Mon Nov 23 2009 11:26:49 : Primary - Stream[AGOrlando1] Status: NetStream.Unpublish.Success
    Mon Nov 23 2009 11:26:50 : Primary - Stream[AGOrlando2] Status: NetStream.Unpublish.Success
    Tue Nov 24 2009 09:25:36 : Video size changed.
    Tue Nov 24 2009 09:25:45 : Primary - Stream[AGOrlando1] Status: Success
    Tue Nov 24 2009 09:25:45 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
    Tue Nov 24 2009 09:25:45 : Primary - Stream[AGOrlando2] Status: Success
    Tue Nov 24 2009 09:25:45 : Primary - Stream[AGOrlando2] Status: NetStream.Publish.Start
    Tue Nov 24 2009 09:25:45 : Session Started
    Tue Nov 24 2009 09:25:46 : Video Encoding Started
    Tue Nov 24 2009 09:25:46 : Audio Encoding Started
    Tue Nov 24 2009 09:29:24 : Primary - Network Status: NetConnection.Connect.Closed status
    Tue Nov 24 2009 09:29:34 : Primary - Disconnected
    Tue Nov 24 2009 09:29:37 : Primary - Re-establishing connection, attempt 1
    Tue Nov 24 2009 09:29:38 : Primary - Reconnected to FMS/3,0,1,123
    Tue Nov 24 2009 09:29:38 : Primary - Stream[AGOrlando1] Status: Success
    Tue Nov 24 2009 09:29:38 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
    Tue Nov 24 2009 09:29:38 : Primary - Stream[AGOrlando2] Status: Success
    Tue Nov 24 2009 09:29:39 : Primary - Stream[AGOrlando2] Status: NetStream.Publish.Start
    Tue Nov 24 2009 09:30:08 : Audio Encoding Stopped
    Tue Nov 24 2009 09:30:08 : Video Encoding Stopped
    Tue Nov 24 2009 09:30:08 : Session Stopped
    Tue Nov 24 2009 09:30:08 : Primary - Stream[AGOrlando1] Status: NetStream.Unpublish.Success
    Tue Nov 24 2009 09:30:08 : Primary - Stream[AGOrlando2] Status: NetStream.Unpublish.Success
    Tue Nov 24 2009 09:30:30 : Video size changed.
    Tue Nov 24 2009 09:30:36 : Primary - Stream[AGOrlando1] Status: Success
    Tue Nov 24 2009 09:30:36 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
    Tue Nov 24 2009 09:30:36 : Session Started
    Tue Nov 24 2009 09:30:36 : Video Encoding Started
    Tue Nov 24 2009 09:30:37 : Audio Encoding Started
    Tue Nov 24 2009 09:32:12 : Audio Encoding Stopped
    Tue Nov 24 2009 09:32:12 : Video Encoding Stopped
    Tue Nov 24 2009 09:32:12 : Session Stopped
    Tue Nov 24 2009 09:32:13 : Primary - Stream[AGOrlando1] Status: NetStream.Unpublish.Success
    Tue Nov 24 2009 09:32:42 : Primary - Stream[AGOrlando1] Status: Success
    Tue Nov 24 2009 09:32:42 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
    Tue Nov 24 2009 09:32:42 : Primary - Stream[AGOrlando2] Status: Success
    Tue Nov 24 2009 09:32:43 : Primary - Stream[AGOrlando2] Status: NetStream.Publish.Start
    Tue Nov 24 2009 09:32:43 : Session Started
    Tue Nov 24 2009 09:32:43 : Video Encoding Started
    Tue Nov 24 2009 09:32:43 : Audio Encoding Started
    Tue Nov 24 2009 09:33:30 : Audio Encoding Stopped
    Tue Nov 24 2009 09:33:30 : Video Encoding Stopped
    Tue Nov 24 2009 09:33:30 : Session Stopped
    Tue Nov 24 2009 09:33:30 : Primary - Stream[AGOrlando1] Status: NetStream.Unpublish.Success
    Tue Nov 24 2009 09:33:31 : Primary - Stream[AGOrlando2] Status: NetStream.Unpublish.Success
    Tue Nov 24 2009 09:33:38 : Video size changed.
    Tue Nov 24 2009 09:33:48 : Primary - Stream[AGOrlando1] Status: Success
    Tue Nov 24 2009 09:33:48 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
    Tue Nov 24 2009 09:33:49 : Primary - Stream[AGOrlando2] Status: Success
    Tue Nov 24 2009 09:33:49 : Primary - Stream[AGOrlando2] Status: NetStream.Publish.Start
    Tue Nov 24 2009 09:33:49 : Session Started
    Tue Nov 24 2009 09:33:49 : Video Encoding Started
    Tue Nov 24 2009 09:33:50 : Audio Encoding Started
    Tue Nov 24 2009 10:26:59 : Primary - Network Status: NetConnection.Connect.Closed status
    Tue Nov 24 2009 10:27:10 : Primary - Disconnected
    Tue Nov 24 2009 10:27:11 : Primary - Re-establishing connection, attempt 1
    Tue Nov 24 2009 10:27:11 : Primary - Reconnected to FMS/3,0,1,123
    Tue Nov 24 2009 10:27:11 : Primary - Stream[AGOrlando1] Status: Success
    Tue Nov 24 2009 10:27:12 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
    Tue Nov 24 2009 10:27:12 : Primary - Stream[AGOrlando2] Status: Success
    Tue Nov 24 2009 10:27:12 : Primary - Stream[AGOrlando2] Status: NetStream.Publish.Start
    Tue Nov 24 2009 10:28:33 : Audio Encoding Stopped
    Tue Nov 24 2009 10:28:33 : Video Encoding Stopped
    Tue Nov 24 2009 10:28:33 : Session Stopped
    Tue Nov 24 2009 10:28:34 : Primary - Stream[AGOrlando1] Status: NetStream.Unpublish.Success
    Tue Nov 24 2009 10:28:34 : Primary - Stream[AGOrlando2] Status: NetStream.Unpublish.Success
    Tue Nov 24 2009 10:28:42 : Primary - Stream[AGOrlando1] Status: Success
    Tue Nov 24 2009 10:28:42 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
    Tue Nov 24 2009 10:28:42 : Primary - Stream[AGOrlando2] Status: Success
    Tue Nov 24 2009 10:28:43 : Primary - Stream[AGOrlando2] Status: NetStream.Publish.Start
    Tue Nov 24 2009 10:28:43 : Session Started
    Tue Nov 24 2009 10:28:43 : Video Encoding Started
    Tue Nov 24 2009 10:28:43 : Audio Encoding Started
    Tue Nov 24 2009 10:31:42 : Primary - Network Status: NetConnection.Connect.Closed status
    Tue Nov 24 2009 10:31:53 : Primary - Disconnected
    Tue Nov 24 2009 10:31:56 : Primary - Re-establishing connection, attempt 1
    Tue Nov 24 2009 10:31:56 : Primary - Reconnected to FMS/3,0,1,123
    Tue Nov 24 2009 10:31:56 : Primary - Stream[AGOrlando1] Status: Success
    Tue Nov 24 2009 10:31:56 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
    Tue Nov 24 2009 10:31:57 : Primary - Stream[AGOrlando2] Status: Success
    Tue Nov 24 2009 10:31:57 : Primary - Stream[AGOrlando2] Status: NetStream.Publish.Start
    Tue Nov 24 2009 10:32:54 : Primary - Network Status: NetConnection.Connect.Closed status
    Tue Nov 24 2009 10:33:04 : Primary - Disconnected
    Tue Nov 24 2009 10:33:05 : Primary - Re-establishing connection, attempt 1
    Tue Nov 24 2009 10:33:05 : Primary - Reconnected to FMS/3,0,1,123
    Tue Nov 24 2009 10:33:05 : Primary - Stream[AGOrlando1] Status: Success
    Tue Nov 24 2009 10:33:06 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
    Tue Nov 24 2009 10:33:06 : Primary - Stream[AGOrlando2] Status: Success
    Tue Nov 24 2009 10:33:06 : Primary - Stream[AGOrlando2] Status: NetStream.Publish.Start
    Tue Nov 24 2009 10:33:22 : Audio Encoding Stopped
    Tue Nov 24 2009 10:33:22 : Video Encoding Stopped
    Tue Nov 24 2009 10:33:22 : Session Stopped
    Tue Nov 24 2009 10:33:22 : Primary - Stream[AGOrlando1] Status: NetStream.Unpublish.Success
    Tue Nov 24 2009 10:33:23 : Primary - Stream[AGOrlando2] Status: NetStream.Unpublish.Success
    Tue Nov 24 2009 10:33:25 : Primary - Stream[AGOrlando1] Status: Success
    Tue Nov 24 2009 10:33:25 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
    Tue Nov 24 2009 10:33:25 : Primary - Stream[AGOrlando2] Status: Success
    Tue Nov 24 2009 10:33:26 : Primary - Stream[AGOrlando2] Status: NetStream.Publish.Start
    Tue Nov 24 2009 10:33:26 : Session Started
    Tue Nov 24 2009 10:33:26 : Video Encoding Started
    Tue Nov 24 2009 10:33:26 : Audio Encoding Started

    FMLE is disconneting from FMS after every few minutes.
    Problem is between network of FMLE and FMS. So you need to check network conditions between FMLE and server to avoid this problem.
    Either network of your machine or server machine is getting lost after every few minutes which is stopping broadcast.
    Please check and let me if you find the problem.

  • Microsoft Exchange Replication Service keep stopping

    Not sure what is going on here. The replication service keep stopping on one of my servers within the DAG. I cant think of anything different about this server compared to others (anything known at least). This server sits at our DR facility and is the host
    of the 3rd copy to a few of our databases, which primary and secondary ones live at our HQ. The application log reports this every 5-10 seconds
    Watson report about to be sent for process id: 31860, with parameters: E12IIS, c-RTL-AMD64, 15.00.0995.029, msexchangerepl, M.Exchange.Common, M.E.C.H.DatabaseFailureItem.Parse, System.ArgumentOutOfRangeException, fe19, 15.00.0995.012.
    ErrorReportingEnabled: False 
    The system log reports this every 5-10 seconds also:
    The Microsoft Exchange Replication service terminated unexpectedly.  It has done this 1 time(s).  The following corrective action will be taken in 5000 milliseconds: Restart the service.
    I have ran windows update, and it seems that every time I reboot the machine, the shutdown tracker comes up. I think it has something to do with hardware, but no idea where to look next. 

    Hi,
    This issue occurred because Microsoft Exchange Replication Services Was Unable to Write In "Microsoft-Exchange-MailboxDatabaseFailureItems/Operational"
    The fix for the issue will be available in next cumulative update. Meanwhile, please follow the steps below for a workaround to resolve the issue. This workaround is to clear the entries log storing mailbox database failure items.
    On problem server, open command prompt in administrator privileges.
    Run following command to clear the even entries from the log
    Wevtutil.exe cl "Microsoft-Exchange-MailboxDatabaseFailureItems/Operational"
    Best Regards.

  • I have successfully installed AI but photoshop keeps stopping @ 42%, so does InDesign...

    i have successfully installed AI but photoshop keeps stopping @ 42%, so does InDesign... can you help?

    Hi Kate,
    Kindly check the details in the link mentioned below.
    Troubleshoot install issues with log files | CS5, CS5.5, CS6
    Thanks,
    Atul Saini

  • Printer spooler keeps stopping

    Windows 8.1. I have checked the printer spooler service it is configured correctly as far as I can tell. Set to start automatically, restart on the first and second failure. The dependencies look ok.
    I have tried to remove unwanted printers from 'Devices and printers'. They keep coming back after a reboot. Some of these are shared printers that no longer exist on the host machine. They all remove except one which stubbornly refuses to budge.
    I try installing my new cannon printer, it starts the installation but then fails because the printer spooler service is not running.
    - Processing cannot be continued because the Windows Print Spooler service has been stopped. Start the Print Spooler service and then try again.
    I restart the printer spooler service and try again. Same problem.
    I restart the machine. Same problem.
    I have no idea why it keeps stopping. How do you get the service to log errors.
    I have tried to use the Troubleshooting application. It states 'the printer spooler service is not running' and restarts it. One tries to reinstall the printer, same problem.
    How does one fix this problem? Is there a tool to remove all printers and start again?

    Windows 8.1. I have checked the printer spooler service it is configured correctly as far as I can tell. Set to start automatically, restart on the first and second failure. The dependencies look ok.
    I have tried to remove unwanted printers from 'Devices and printers'. They keep coming back after a reboot. Some of these are shared printers that no longer exist on the host machine. They all remove except one which stubbornly refuses to budge.
    I try installing my new cannon printer, it starts the installation but then fails because the printer spooler service is not running.
    - Processing cannot be continued because the Windows Print Spooler service has been stopped. Start the Print Spooler service and then try again.
    I restart the printer spooler service and try again. Same problem.
    I restart the machine. Same problem.
    I have no idea why it keeps stopping. How do you get the service to log errors.
    I have tried to use the Troubleshooting application. It states 'the printer spooler service is not running' and restarts it. One tries to reinstall the printer, same problem.
    How does one fix this problem? Is there a tool to remove all printers and start again?
    Every time I reboot I get the same printers in 'devices and printers' even though I have removed them. Also there is one printer that will not be removed. If I try and then hover the mouse cursor over the printer icon, the tool tips displayed are
    "Remove failed"
    "Driver does not exist"
    Ok. I don't give a stuff about the missing driver, I just want to remove it. Why  does a missing driver prevent me from removing a printer. I though that if the driver was missing it would indicate that the printer is inoperable and make removing it
    even easier.
    How on earth does one get around this embargo. How does one get rid of dud printers from the control panel applet?
    I am sure that these remnant printers are causing the print spooler service to keep crashing.
    The system event log has these errors
    Log Name:      System
    Source:        Service Control Manager
    Date:          2/09/2014 9:57:44 PM
    Event ID:      7034
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      DeesNotebook
    Description:
    The Print Spooler service terminated unexpectedly.  It has done this 3 time(s).
    If I click on the link to get more information I get this not very helpful information
    Details
    Product: Windows Operating System
    Event ID: 7024
    Source: Service Control Manager
    Version: 5.2
    Symbolic Name: EVENT_SERVICE_EXIT_FAILED_SPECIFIC
    Message: The %1 service terminated with service-specific error %2.
    Explanation
    The specified service stopped unexpectedly with the error indicated in the message. Windows does not recognize the service's error code.
    User Action
    To display the service-specific error code in the Service_Exit_Code field, at the command line, type
     sc query service name
    The information displayed might help you troubleshoot why the error occurred.
    Currently there are no Microsoft Knowledge Base articles available for this specific error or event message. For information about other support options you can use to find answers online, see

  • Microsoft Forefront Threat management Gateway services keeps stopping

    Please assist urgently
    Microsoft Forefront Threat management Gateway 2010 services keeps stopping. We are on the 
    Service Pack 2 Roll update 5
     On the event viewer does not display reason why the services stopped.
    Your assistance will be highly appreciated
    Regards
    Daniel Nkuna

    Hi,
    Here is a similar thread that TMG keeps stopping and no error displayed in event log. It is fixed by uninstalling Surf cop on the TMG servers. Do you have such application installed on TMG server?
    TMG Firewall service stopping
    Best Regards,
    Joyce
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Unable to stop the event logs on access point console

    Hi team,
    I have an AIR-LAP1131AG-E-K9 access point having ios c1130-k9w8-mx.124-21a.JHB1.
    When I am trying to take the console of it there are many logs generated like LWAPP ...Go join the controller, Discover controller etc. and the ap is unable to register to the controller(2112 with ios version 6.0.199.4). I'm trying to enter the command but there are many event msg generated....How do i stop this event log. I tried entering the command no debug all. but still there are many logs...
    I want to enter the the following commands
    #lwapp ap  ip address <ip addr>.
    #lwapp a pip default-gateway <gateway ip addr>
    #lwapp ap controller ip addr <controller ip>
    #wr me
    Revert me back on urgent basis
    Thanks in advance..

    Thanks Rashika,
    Now the access point got registered to the controller..This happened becuse of country Code..
    I have changed the country code to UK, Belgium it started working fine.
    Initially when it was IN the access point was not getting register..
    But now the problem which arised is that the user is unable to get authenticated to the radius server.
    Radius server is reachable and we have done every changes required for radius server authentication.
    Users are getting rejected.
    Customer is saying that the radius server is in IN domain and the WLC/access point is in UK,BE and hence the users are unable to connect..
    Is it so??
    Rply
    Thanks in advance...

  • I am trying to download adobe reader for my macbook air but it keeps stopping at 44%. I have downloaded the latest updates for my mac and retried numerous times. Please advise. Thank you

    I am trying to download adobe reader for my macbook air but it keeps stopping at 44%. I have downloaded the latest updates for my mac and retried numerous times. Please advise. Thank you

    As posted about a dozen times every day, try the offline installer from http://get.adobe.com/reader/enterprise/

  • My 160GB ipod classic stopped whilst playing music and will not turn back on despite having almost a full battery. I have tried connecting to itunes and a docking station but will not turn on at all - HELP?!

    My 160GB ipod classic stopped whilst playing music and will not turn back on despite having almost a full battery. I have tried connecting to itunes and a docking station but will not turn on at all - HELP?!
    I've had this from new for 2 years, the battery life is excellent and lasts for days so I know it's not a power issue as it was fully charged that morning. No signs of connection in itunes, it's not showing as a connected device.
    Can anyone please help?

    Hi gscoops,
    Welcome to Apple Support Communities.
    You may find the steps in our iPod Troubleshooting Assistant helpful:
    http://www.apple.com/support/ipod/five_rs/classic/
    Best,
    Jeremy

  • Logic 10.0.07 keeps stopping recording at the same time every time

    Logic 10.0.07 keeps stopping recording at the same time every time 3.14!
    How can i get it to extend on recording time?
    Model Name: Mac Pro
      Model Identifier: MacPro6,1
      Processor Name: 6-Core Intel Xeon E5
      Processor Speed: 3.5 GHz
      Number of Processors: 1
      Total Number of Cores: 6
      L2 Cache (per Core): 256 KB
      L3 Cache: 12 MB
      Memory: 32 GB
      L3 Cache: 12 MB
      Memory: 32 GB
    Model Name:
      L3 Cache: 12 MB
      Memory: 32 GB
    Model Name: Mac Pro
      Model Identifier: Mac
      L2 Cache (per Core): 25
    Model Name: Mac Pro
      Model Identifier: MacPro
      L3 Cache: 12 MB
      Memory: 32
      L3 Cache: 12 MB
      Memory: 32 GB

    Do you have auto drop enabled? Look for a red bar at the top where the green cycle bar is. It will punch you out at the end of the red bar.

  • I am getting error 4310 and my computer keeps stopping the burn before I get to burn it

    I am getting error 4310 when trying to burn a CD with just 3 songs on it that I have just bought on ITunes and my computer keeps stopping the burn before I get to burn it.  Can't find any information anywhere as to why.  Can anyone help? Thanks

    iTunes places the iPhone backup in the following location. Navigate there & delete everything in the backup folder, but not the folder itself. You will have to turn on "Show All Hidden Files & Folders" to see it:
    Mac:~/Library/Application Support/MobileSync/Backup/
    Windows XP:\Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Windows Vista and Windows 7:\Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

  • I have a Macbook pro mid 2011 and just bought the Apple TV. While watching program or movie from any of the apps such as Watch ABC, the program keeps stopping and starting constantly.

    I have a Macbook pro mid 2011 and just bought the Apple TV. While watching program or movie from any of the apps such as Watch ABC, the program keeps stopping and starting constantly.

    That would indicate a network issue.
    Reboot ATV and router
    Make sure DNS is set to auto
    Ensure router is up to date, if on wifi try ethernet
    Go to istumbler.net to get a report of the network, look for signal strength and noise

  • Using Apple TV for first time - to rent a movie.  Logged in successfully - billing info updated.  Keep getting message to log into Itunes on PC - movie won't load on TV

    using Apple TV for first time - to rent a movie.  Logged in successfully - billing info updated.  Keep getting message to log into Itunes on PC - movie won't load on TV -
    any advice?

    3GB for a movie? That's almost equivalent to an original DVD. 
    Have you checked in the Recently Added playlist?
    I think this is possibly linear.  Select 'normal' in HB, iTunes accepts it; select 'high quality' in HB iTunes doesn't.  I can't say why; I don't have any video that anywhere approaches 3GB in size.  If that's how iTunes behaves I don't see you have too many options.  You either select normal and it works, or you select HQ and live with playing the movie outside of iTunes.
    I won't ask what movie because any help with illegally ripped copy protected DVDs is strictly prohibited by the Terms of Use so I'm assuming this is a 6 hour video of your puppy playing on the floor.

Maybe you are looking for

  • How export report into excel sheet automatically using SSRS 2010?

    Hi, I have created many reports using SQL Server Data Tool 2010 and at my work, we are using active batch to ran reports every month. Now question is, my boss want me to set up reports such a way that when active batch is ran, reports should be expor

  • Question on internal table logic..

    Gurus, I have a internal table as follows: it_tab: ID---ACTION---CHANGE A1-----X-- B2---- U C1-----X-- U C2-----X-- Without looping at the table, how can I find get the result that the internal table has 3 ids with ACTION ='X' and 1 ID with ACTION  =

  • Problems after unlocking from third party? iPhone 6

    iPhone 6 locked to softbank japan. what will be the problems i will face after permanent unlocking from third party?

  • How can i change the trash sound ?

    Hi everyone! I'd like to change the trash sound, you know that boring sound when you empty the trash. I'd like to change it but I didnt find anything about it. Thanks Pi-M

  • ADF Table Refreshing?

    Hi, I have a problem with my ADF table which needs to be resolved ASAP. Somebody please help me here..Here are the details.. I have an ADF table based on a VO. I Have a parameter to this view object and i am defaulting a value to this parameter I cre