BIOHD-2 error code but starts anyway

Hi!
I've refreshed my HP computer which was working alright with windows 7 before. Now I've installed windows 8.1 N and when Im trying to start up I get to the HP screen, if I try to diagnos the problem it says that I've got a BIOHD-2 error, but after exiting the diagnosis the computer starts up as normal. If I get to the set up-screen it also starts up as normal after I've saved and pressed exit.
I don't really trust the compuer even though it acts normal after it started. Any tips on what could be wrong and what I can do about it?
I really don't know much about computers. Appreciate answers

I highly recommend that you save all important data (documents, photos etc. ) to an external storage device. ONce you have replaced the hard disk you can return the data to its place on your desktop PC.
BIOHD-2 is a diagnostic code that indicates imminent or pending failure of the hard disk. In order to resolve the error you will need to replace the hard disk with a new desktop SATA hard disk.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

I am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

i am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

download the 64bit installer,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for furth

I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for further assistance. It doesn't take me to customer support, but does take me to a screen which states. "Error "This serial number is not for a qualifying product." I've checked my account and the product serial number is associated with my account., so I don't see any problem. I have not been able to find a resolution to this problem, so I hope that someone can point me in the right direction. Thank you!

update directly, Product updates

Im really confused. My ipod was giving the 13019 error message. I followed the steps, and it stopped giving me the error code but my music wont appear on my ipod. Any suggestions?

Im really confused. My ipod was giving the 13019 error message. I followed the steps, and it stopped giving me the error code but my music wont appear on my ipod. Any suggestions? Please help

Are you saying that the "Music" app is not present on your iPod Touch? Perhaps there is an issue with the restrictions on the iPod? If you're absolutely sure that the Music app is not present I would consider creating a backup of your iPod after syncing it with iTunes. I would then consider restoring it if this is the case.

BIOHD-7 error code

after reading some of the forums on this error code i think i will have to buy a new hard drive. i was hoping if i got HP recovery kit i would be able to fix mine. i also got a error code 0xef0003. i tried to use the built in recovey but no luck. now all i have is a black screen that says no bootable disk. so i have is a 2 part question.
1. if i buy a new hard drive will i need the recovery kit that HP offers? i dont have any back up disk.
2. and can i up grade the hard drive? say to a 1TB or maybe 2TB with out doing any other upgrades to the computer?
OS- Windows 7
Model- 300-1120
Product- AY581AA-ABA
Bld ID- A1NAV6PRA3
Thank you for your help...
This question was solved.
View Solution.

Btheone, welcome to the forum.
You are correct that the hard drive failed. The maximum hard drive supported by Win 7 is 2 GB. Yes, you need the Recovery Discs provided by HP.
Here is a guide to help you Recover the system after you replace the hard drive. Read it carefully before buying the new hard drive.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Error codes upon starting - can someone help?

Interval Since Last Panic Report: 89359 sec
Panics Since Last Report:          2
Anonymous UUID:                    B3F37161-29D9-4758-A1FE-4EDDD82AFEE4
Tue May 27 18:42:53 2014
panic(cpu 2 caller 0xffffff80002c4794): Kernel trap at 0xffffff807e47d000, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff807e47d000, CR3: 0x0000000000100000, CR4: 0x00000000001606e0
RAX: 0xffffff800e257d48, RBX: 0x0000000000000000, RCX: 0x00000d6350168498, RDX: 0x0000000000000000
RSP: 0xffffff807fa13af8, RBP: 0xffffff807fa13b30, RSI: 0x0000000000000039, RDI: 0xffffff800be82000
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0x0000000000000010, R11: 0x0000000000000001
R12: 0x00000d6350168498, R13: 0xffffff800be82000, R14: 0xffffff800be82000, R15: 0x0000000000000100
RFL: 0x0000000000010246, RIP: 0xffffff807e47d000, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0xffffff807e47d000, Error code: 0x0000000000000010, Faulting CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff807fa137a0 : 0xffffff8000220792
0xffffff807fa13820 : 0xffffff80002c4794
0xffffff807fa139d0 : 0xffffff80002da55d
0xffffff807fa139f0 : 0xffffff807e47d000
0xffffff807fa13b30 : 0xffffff7f80a30aa9
0xffffff807fa13b90 : 0xffffff7f80a2eded
0xffffff807fa13c10 : 0xffffff800063dd21
0xffffff807fa13c70 : 0xffffff7f80a26bc6
0xffffff807fa13c80 : 0xffffff80006264a2
0xffffff807fa13cc0 : 0xffffff8000626648
0xffffff807fa13d00 : 0xffffff8000628a5f
0xffffff807fa13d70 : 0xffffff8000623068
0xffffff807fa13d80 : 0xffffff7f80833ba3
0xffffff807fa13db0 : 0xffffff7f80ae0c77
0xffffff807fa13de0 : 0xffffff7f80ae35c0
0xffffff807fa13e40 : 0xffffff7f80ada016
0xffffff807fa13e70 : 0xffffff7f80add141
0xffffff807fa13ec0 : 0xffffff800062fd10
0xffffff807fa13f50 : 0xffffff800063019e
0xffffff807fa13f70 : 0xffffff800023dbbc
0xffffff807fa13fb0 : 0xffffff8000820057
      Kernel Extensions in backtrace:
         com.apple.iokit.IOHIDFamily(1.7.1)[675CB4D0-DEAD-379A-AEAC-7719BFE54EEC]@0xffff ff7f80a0b000->0xffffff7f80a75fff
            dependency: com.apple.driver.AppleKeyStore(28.18)[38F9324B-8C61-36B3-95DC-9ACA5B6BFAB5]@0xf fffff7f809ff000
         com.apple.iokit.IOUSBFamily(5.1)[71AF5A29-1AE2-3812-A0FF-96DD1CC6534D]@0xffffff 7f8081d000->0xffffff7f80872fff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f807ff000
         com.apple.driver.AppleUSBHub(5.1)[0CE3C84E-C267-3BE4-B596-21065BA2ABDD]@0xfffff f7f80ad5000->0xffffff7f80ae8fff
            dependency: com.apple.iokit.IOUSBFamily(5.1.0)[71AF5A29-1AE2-3812-A0FF-96DD1CC6534D]@0xffff ff7f8081d000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookAir5,1 (Mac-66F35F19FE2A0D05)
System uptime in nanoseconds: 14720196817283
last loaded kext at 13193843783953: com.trusteer.driver.gakl_driver_2          1 (addr 0xffffff7f80795000, size 32768)
last unloaded kext at 3935197807080: com.apple.driver.AppleUSBCDC          4.1.22 (addr 0xffffff7f80795000, size 12288)
loaded kexts:
com.trusteer.driver.gakl_driver_2          1
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AGPM          100.12.75
com.apple.driver.ApplePlatformEnabler          2.0.5d3
com.apple.driver.X86PlatformShim          5.0.0d8
com.apple.driver.AppleHDA          2.2.5a5
com.apple.driver.AppleMikeyDriver          2.2.5a5
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AppleSMCPDRC          5.0.0d8
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.iokit.IOBluetoothSerialManager          4.0.8f17
com.apple.driver.AppleSMCLMU          2.0.1d2
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.3
com.apple.driver.ApplePolicyControl          3.1.33
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleBacklight          170.2.2
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.driver.AppleIntelHD4000Graphics          7.3.2
com.apple.driver.AppleIntelFramebufferCapri          7.3.2
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.8f17
com.apple.driver.AppleUSBTCButtons          227.6
com.apple.driver.AppleUSBTCKeyboard          227.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.1.0
com.apple.driver.AppleUSBHub          5.1.0
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleAHCIPort          2.3.1
com.apple.driver.AirPort.Brcm4331          561.7.22
com.apple.driver.AppleUSBEHCI          5.1.0
com.apple.driver.AppleUSBXHCI          1.1.0
com.apple.driver.AppleACPIButtons          1.5
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.5
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1.4
com.apple.security.TMSafetyNet          8
com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
com.apple.kext.triggers          1.0
com.apple.driver.DspFuncLib          2.2.5a5
com.apple.iokit.IOSurface          80.0.2
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.driver.AppleHDAController          2.2.5a5
com.apple.iokit.IOHDAFamily          2.2.5a5
com.apple.iokit.IOAudioFamily          1.8.6fc18
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.X86PlatformPlugin          5.1.1d6
com.apple.driver.AppleSMC          3.1.3d10
com.apple.driver.IOPlatformPluginFamily          5.1.1d6
com.apple.driver.AppleGraphicsControl          3.1.33
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.iokit.IONDRVSupport          2.3.4
com.apple.iokit.IOGraphicsFamily          2.3.4
com.apple.driver.AppleUSBBluetoothHCIController          4.0.8f17
com.apple.iokit.IOBluetoothFamily          4.0.8f17
com.apple.driver.AppleThunderboltDPInAdapter          1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
com.apple.driver.AppleUSBMultitouch          230.5
com.apple.iokit.IOUSBHIDDriver          5.0.0
com.apple.driver.AppleUSBMergeNub          5.1.0
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
com.apple.driver.AppleThunderboltNHI          1.6.0
com.apple.iokit.IOThunderboltFamily          2.0.3
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.iokit.IOAHCIFamily          2.0.8
com.apple.iokit.IO80211Family          420.3
com.apple.iokit.IONetworkingFamily          2.1
com.apple.iokit.IOUSBFamily          5.1.0
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          177.11
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages          331.7
com.apple.iokit.IOStorageFamily          1.7.2
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.5
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4
Model: MacBookAir5,1, BootROM MBA51.00EF.B02, 2 processors, Intel Core i5, 1.7 GHz, 4 GB, SMC 2.4f19
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333235533643465238412D50422020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333235533643465238412D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xE9), Broadcom BCM43xx 1.0 (5.106.198.19.22)
Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD TS064E, 60.67 GB
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2512, 0x1d180000 / 3
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821f, 0x1d181300 / 7
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x024a, 0x1d182000 / 4
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8510, 0x1a110000 / 3
This keeps coming through and I have been to a few forum sites but cannot find the exact one - unless I am looking at the wrong thing?? Can someone please help? Thanks, Tim

Uninstalling Rapport on Mac OS X | Trusteer
Test after removing that software.

HP Touchsmart with a BIOHD - 8 error code. What does it mean and what can I do?

Computer keeps crashing. Ran diagnostics and it came up with the error code BIOHD -8 for the hard drive. What do I do?

Here are the specs and ordering options for your HP TouchSmart IQ526t CTO Desktop Computer. Since this is a configure-to-order model, I have no way of knowing the size of the hard drive in your computer. Please post the size of the hard drive shown on your order slip or in Windows. Sizes available for ordering were;
320 GB 7200 rpm SATA 3G (3.0 Gb/sec)
500 GB 7200 rpm SATA 3G (3.0 Gb/sec)
640 GB 7200 rpm SATA 3G (3.0 Gb/sec)
750 GB 7200 rpm SATA 3G (3.0 Gb/sec)
1 TB 5400 rpm SATA 3G (3.0 Gb/sec)
Here are some detailed instructions on Replacing the Hard Drive in your IQ526T.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

MSI P7N SLI - PC Wont Boot - Video error code but changing graphics card no help

((Apologies, I think this should be in the forum for Intel Core 2 Duo/Quad boards))
Hi. Brief description of the issue.
Last Saturday there was fan noise. I ignored that, left the machine on, went out. By Sunday morning the machine had turned itself off. I opened it up, identified the problem as the graphics card fan, failed to fix but put the PC back on figuring I'd have to see about a new card soonish.
Later on it had turned itself off again. Got to bios with a system32 config error. I figured that was why it'd been shutting off and went through the long process of manual recovery from that. Turned the computer on, all good, played games.
Until I thought to check the GFX temp... 133 degrees Celcius. Turned it off right away, ordered replacement card - which has now arrived.
But the machine won't boot at all. I get one long tone then two short. This is the same with both the old and the new cards. Blue light comes on, all the fans come on, then the beeps.
But the 'long' isn't long like if it was a RAM issue. I'm googling AMI bios post codes and seeing 1 long + 2 short is a video error, but also that '3 beeps' is a memory problem.
I've swapped my RAM sticks around and tried each stick individually and get the same beep code.
I've reset the CMOS by holding in the button on the back for 5 seconds, with the power cable unplugged and after discharging the capacitors.
The only other suggestions I've found is that it could be a failure of the PSU to power the card. But it should be giving ample power.
Now I am stuck for ideas.
MSI P7N SLI, MS-7380
Intel Q6600
Antec Neopower Blue Modular PSU
Zotac 8800GT [OR Asus GTX 260 212]
OCZ Platinum 2GB (2*1) DDR2 800
Western Digital HDD
LiteOn DVD Rom
Windows XP

With a 94000GT (no power connector from PSU) the machine is now running.
But there's still a problem somewhere (and that's a pretty poor graphics card I don't want to be stuck with) so I'm still keen to find out what to do, or what's wrong.
My 650W Antec with 2 12 volt rails should have no issues powering the other cards.

Biohd-3 error code

HI, I INSTALLED A NEW HARD DRIVE ON MY IQ524 TOUCHSMART PC PRODUCT #NC701AA-ABA, SOFTWARE BUILD# 91NAv6XrA1 AND WHEN I RUN THE DIAGNOSTICS EVERYTHING PASSES BUT THE BOOT PATH DRIVE. I INSTALL THE RECOVERY DISCS BUT GET THE " REBOOT & SELECT PROPER BOOT DEVICE OR INSERT BOOT MEDIA IN SELECTED BOOT DEVICE & PRESS A KEY" EVERY TIME I TRY INSERTING THEM. ALSO I CHECKED BOOT PRIORITY AND THE DVD DRIVE IS FIRST & HARD DRIVE IS SECOND. ALSO TRIED TO CLEAR CMOS SETTINGS STILL NOT ABLE TO USE RECOVERY DISCS. THANKS FOR ANY HELP PLEASE.

BGMJ59, welcome to the forum.
Here is a guide that should help you Recover your system.
For future reference, it is best not to use all CAPS when posting on forums. All CAPS denotes anger and is difficult to read.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

MOVED: MSI P7N SLI - PC Wont Boot - Video error code but changing graphics card no help

This topic has been moved to Intel Core 2 Duo/Quad boards.
https://forum-en.msi.com/index.php?topic=152893.0

With a 94000GT (no power connector from PSU) the machine is now running.
But there's still a problem somewhere (and that's a pretty poor graphics card I don't want to be stuck with) so I'm still keen to find out what to do, or what's wrong.
My 650W Antec with 2 12 volt rails should have no issues powering the other cards.

What do i do if i am receiving a error code BIOHD-4?

i am reviewing BIOHD-4 on diagnostics and a faulty hardware 0x00000e9 message and suggestions

http://h30434.www3.hp.com/t5/TouchSmart-PC/HP-Touchsmart-with-a-BIOHD-8-error-code-What-does-it-mean...
I've read quite a few posts about that error message on this forum. The link above is to one of those threads.
It doesn't look too good, but your answer is probably in the first couple of posts in that link.
GeorgeFN
GeorgeFN
I work on behalf of HP.

PC Doctor Error Code BIOHD-2

HP Pavilion FK484AV-ABA, model m4900t running windows 7 64 bit. RAID-1 setup.
PC crashed. Cannot restart. On cold boot, received the error message that RAID-1 and both hard drives failed. Ran PC-Doctor and received the following diagnostics:
CPU, Memory, all hard drives OK.
Boot Path Diagnostic
Error Code:     BIOHD-2
Warning:          No drives detected.
Suggestion:    Turn off system and verify the drive cables are securely attached.
Since PC-Doctor verified that both drives were OK, I am assuming that the cables also were OK. Any suggestions on what the problem may be??
Thanks in advance for your help.
This question was solved.
View Solution.

Go into the BIOS to see if the drives are recognized. Post your results here.
That is an unusual condition for PC Doktor to report. Normally a BIOHD-2 error code means that a hard disk has failed, but I do doubt that both drives failed at once.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

BIOHD1 Error code

I have an HP P6631P with an AMD Athlon IIx4 635 processor 64bit Operating System running Windows 7 home premium, I have had the computer for 11 months everything was great until yesterday. I pushed the power button and Windows tried to start but froze......I used the repair disk to reboot the computer and after several hrs it brought up the system recovery screen, still wont work keeps taking me to an hp help screen where I can do nothing but exit. I ran a diagnotic and it gave me the BIOHD 1 error code, so my question is....Now what? What do I do now?
This question was solved.
View Solution.

Hi,
It would look like your Hard Drive has failed and will need to be replaced.
As your PC is still under warranty, you should contact HP and arrange to have the drive replaced.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

InDesign CS 5.5 save error code 0

Trying to save a document in ID 5.5 I get the error message saying: "Cannot save "xxx" under a new name. The file "DBTmp7302-2094074591" is damaged (Error code: 0)". Started a new document and tried to save, same thing.
Resetting preferences doesn't help, neither reinstall. What can I do?
I'm running OSX 10.8.2

peteharvey89 wrote:
I had the same issue, ... error code:0. Tried the solution above which doesn't work. Found this on nother forum (objectmix.com › Application Support › Adobe Tools › Adobe Indesign) and seems to be the cause of the issue:
"I got something like - cannot save file error code 1 damaged -
anyway - I Googled it for a while and didn't get anywhere - then I did some experimenting. Basically, I think your problem is that you are either:
1. using symbols like "/" in the filename
2. or doing what I was doing which was trying to save the file in an (accidentally) locked folder. To fix this - right click on the folder and get info - open up sharing and permissions and make sure that your username has full read write access. I also clicked on the settings cog button and applied this setting to everything in the contents of the folder. The folder had somehow corrupted during a network transfer and this is what was making inDesign not play ball.
IE these situations are actually nothing to do with inDesign. But the app doesn't exactly help you out with a better explanation - you have to hunt for it!
Hope this helps other lost souls."
No:2 was in the end exactly what was my problem. I had a network folder that for some unknow reason had gotten locked. Nothing to do with ID itself but got me some gray hairs trying to fix it in the middle of rush getting material ready to print. This is definitely good think to check if you get this error code.

Outlook 2011 for Mac Data is corrupt Mail could not be sent Error code: -19943

Why am I constantly getting this error?
What does this error mean?
How do I fix this?
This MacBook Air belongs to a VIP in our company. She is under the impression that she has received a lemon, due to the following experiences (verbatim):
Random beeping noise coming from machine. Unexplainable. No obvious pattern.
Machine randomly sounds like an airplane taking off. Fan running constantly.
Unable to view Sent folder in Outlook. Periodically.
Unable to view Sent items. Periodically.
Calendar items/invites/meetings do not display accordingly.
Unable to accept/decline meeting invitations.
Pinwheel constantly displays. Forced to reboot due to freezing.
Constantly receiving 'Data is corrupt' error message in Outlook.
Constantly receiving 'An internal server error occurred. The operation failed' in Outlook.
I understand the majority of these issues points towards the Office/Outlook application, but why don't any of the troubleshooting methods resolve or alleviate any of the aforementioned symptoms at all?
No one else in my company with this software is receiving this message.
I have rebuilt the database 3 times.
I have reinstalled the software twice.
All software is up-to-date.
Why doesn't Apple support this software?
Why doesn't Microsoft support this software?
Every forum I search regarding Office for Mac results in a never ending loop of both companies panning the issue off to the other and nobody takes responsibility.
Is there anyone out there willing to take the time to assist me and fully exhaust their knowledge to present some sort of solution towards this issue?
I am fully committed to this discussion and will provide any and all information needed in order to fix the issue.
Why are there other users with the same software who are NOT experiencing the same issues?
As a last resort, I am aware backing-up the profile/account and restoring the OS is an option. What if this plan of action doesn't solve anything? What if the problem persists?
My technical knowledge of Apple/Mac devices is limited, and I would appreciate any advice/suggestions/support on the matter, as this is a high priority issue and I would like to learn from this so as to avoid any similar issues that I may encounter in the future.
Thank you in advance for your help.

Hello Warren, which Mail App?
Generally,
SMTP error 554 (Transaction failed) is one of the most vague error codes, but is typically caused by something in the From or To headers that server doesn't like.
In other words, the problem is in the sender or recipient email address.
It can be caused by
The sender address isn't valid.
The server thinks this email is spam or server IP address has been blacklisted
A spam trap identifying your machine as a relay, or as a machine not trusted to send mail from your domain.
http://www.fox.ra.it/forum/13-submissions-via-email/444-smtp-error-5-5-4-transac tion-failed.html
To see if it's your provider, What's my ip...
http://www.whatismyipaddress.com/
Start with these three, check SpamCop or SpamHaus to see if your IP is there...
http://spamcop.net/bl.shtml
http://www.spamhaus.org/lookup.lasso
http://www.spamhaus.org/zen/
Sometimes an ISP will bloc a whole other ISP too, if it's the source of too much SPAM.

BIOHD-2 error code but starts anyway

Similar Messages

Maybe you are looking for