Biometric is not available in devices manager

I just upgraded my OS to windows 10 pro and everythings working will. My fingerprint was not working nor it appair in the (set sign in options), while Biometric validity fingerprint driver was among the drivers in my device I deleted the driver from device manager (manually) and installed snypatic wbf DDK 5510 (http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Validity-Fingerprint-Common-Driver-for-Windows-10/td-p/5171912) now i even cant found Biometric device listed in the device manager and still problem not solved after many trys of installing different version of validity fingerprint.

"FaceTime is not available in Saudi Arabia."
That is correct.
This has nothing to do with Apple.
Your government does not allow Apple to include the feature.

Similar Messages

My dvd drive not recognized in device manager,getting the yellow explanation mark.

my dvd drive not recognized in device manager,getting the yellow explanation mark. Tried uninstallingdevice drive and scanning for new hardware. scanned for updates, etc. I getting no results. The laptop is a Pavilion DV5. Thanks

Hi,
It could be that the drive has a Hardware issue, but try the following.
From the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, open Device Manager, right click the DVD drive and select Uninstall. When this has completed, restart the notebook and let Windows rediscover the device and check.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

G500 - Bluetooth not listed in device manager

Hi,
Bluetooth is not listed under device manager
it doesn't appear in pc settings/pc and devices neither does the bluetooth switch appears une aiplane mode
my model;
product: 20236
serial: xxxxx
thx
Moderator comment: Serial number(s) removed to protect member from mischief.

Hi guys,
I see that Shiv_K is helping you out on this
In addition.
Try to refresh the Hardware and Power.
    Remove AC and Battery
          Hold the Power Button down for at least 15 sec. Then Reconnect Everything back
Turn on the Systen and Right away start hitting F2 to load the BIOS Utility
          Inside BIOS hit F9 then Enter for Yes to load defaults
          Hit F10 to Save and Exit then Enter for YES.
now open
    Control Panel / Programs, and uninstall Lenovo Energy Management and restart the system
Then install these
Lenovo Energy Management
Intel Wifi Driver
Press Fn+F5 and see if you will be provided with this window showing the bluetooth..
Spoiler (Highlight to read)
Hope this helps,
Cheers
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

G470 Bluetooth not listed under Device Manager and not working

Hi,
Can someone teach me how to solve my G470 problem?
Its Bluetooth is not listed under Device Manager and I can't find it anywhere.
Before that, it isn't working at all.
Thanks
Solved!
Go to Solution.

hi athirah11,
Welcome to the Lenovo Forums.
Can you try the following:
1. Press the Windows key‌ +R, type devmgmt.msc and press Enter. On the Device Manager, click View > Show hidden devices and check if the Bluetooth device is being listed.
- Link to picture
- Link to picture
2. If the bluetooth device shows up under the Device Manager, do the following:
a. Under Control Panel > Programs, uninstall the Bluetooth driver/software (reboot if necessary)
b. Run the Bluetooth Driver Installer
- this will identify the type of Bluetooth Device installed on the system (eg. Qualcom Atheros, Intel, etc.) and it will install a generic Bluetooth driver. If successful, the Bluetooth device and its components should now appear normally under the Device Manager.
If the bluetooth device still doesn't show up, can you provide the model number of your G470 (eg. 59xxxxxx) fur further checking.
Let me know how it goes.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Hp pavillion dv9502au notebook pc broadcom wireless adpater not shown in device manager

Problem: hp pavillion dv9502au notebook pc broadcom wireless adpater not shown in device manager
System Type
hp pavillion dv9502au notebook pc
Windows editon
Windows 7 Ultimate
System
Processor       AMD Turion(tm) 64 X2 Moblie Technology TL-56 1.80GHz
Installed Memory   1.00 GB (895 MB usable)
System type              32-bit Operating System
Wirless TECH
Broadcom Wireless
Problem
1. I have a switch at front left of laptop which can be slided to switch on Wireless Connections
2. IT turns red when switched off and blue when switched on as normal
3. But only thing that turns up is Bluetooth connection and no broadcom wireless connection
4. No adapter is shown in the devmgmt.msc( device manager)
5. I tried installing broadcom drivers to reslove the problem, and restarted many times for install.
6. I tried the "reset thing" after removing the battery that experts said about.
7. I was atlast forced to use Wired conneciton using ethernet( i hate it because, i can't be mobile around the house)
8. Please Help
Windows 7 Ultimate
System
Processor       AMD Turion(tm) 64 X2 Moblie Technology TL-56 1.80GHz
Installed Memory   1.00 GB (895 MB usable)
System type       32-bit Operating System
Wirless TECH
Broadcom Wireless
Problem
1. I have a switch at front left of laptop which can be slided to switch on Wireless Connections
2. IT turns red when switched off and blue when switched on as normal
3. But only thing that turns up is Bluetooth connection and no broadcom wireless connection
4. No adapter is shown in the devmgmt.msc( device manager) (network adpaters shown are
                                     NVIDIA geforce adapter, bluetooth adpaters)
5. I tried installing many broadcom drivers to reslove the problem, and restarted many times for install.
6. I tried the "reset thing" after removing the battery that experts said about.
7. I was atlast forced to use Wired conneciton using ethernet( i hate it because, i can't be mobile around the house)
Please help

Your wireless adapter is defective.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

X200s WiFi network Card is not shown in Device Manager

Hello,
I have a X200s laptop. WinXp is installed on it.
The problem is that the WiFi network card is not listed in device manager under network cards. And the Wifi led is always off. Only bluetooth and Wireless wan leds are on.
Can anyone help me, I need to let the XP detevt the WIFI adapter.
Thank you.

i have the same problem. Can you tell what to do

Pls let me know how do i cancel my existing cloud subscription as cancel link is not available in my manage subscription page. I am planning to us lightroom cc subscription

pls let me know how do i cancel my existing cloud subscription as cancel link is not available in my manage subscription page.
I am planning to us lightroom cc subscription

This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
-start here https://forums.adobe.com/thread/1703848
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
--and two links which may provide more details, if the above links don't help you
-http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

My ipad air's wifi address is not available, the device was just recently used but bought 7 months ago..

my ipad air's wifi address is not available, the device was just recently used but bought 7 months ago..

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you probably have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

"VLAN(s) are not available in Port Manager" in 7613

Dear Sir,
I got a problem when I try to create a VLAN in a 7613 router. The screen capature like the following:
router(conf)#vlan 1045
router(conf-vlan)#exit
VLAN(s) are not available in Port Manager
The VLAN is failed to create. The VLAN range which is failed to create is from 1001 - 1060. Is there any expert that meet the similar problem? and what should I do to solve the problem? so that I can create VLAN 1045?
Thank you very much!

Extended Range VLAN - FAIL
I was reading an old post on CCIE talk about extended range vlans and I learned something new. The post is here:
CCIE Talk
If a Catalyst switch has any routed ports then it uses an extended vlan as an "internal vlan" for that port. Why? I don't know but it's something to take caution with if you run into any issues.
Check it out:
SW1#sho vlan internal usage
VLAN Usage
Now let's create a routed port:
SW1(config)#int f0/24
SW1(config-if)#no sw
Now we have VLAN 1006 taken up:
SW1#sho vlan internal usage
VLAN Usage
1006 FastEthernet0/24
SW1#
What happens if we try to create or modify VLAN 1006? Let's see:
SW1(config)#vlan 1006
SW1(config-vlan)#exit
% Failed to create VLANs 1006
VLAN(s) not available in Port Manager.
%Failed to commit extended VLAN(s) changes.
00:06:13: %PM-4-EXT_VLAN_INUSE: VLAN 1006 currently in use by FastEthernet0/24
00:06:13: %SW_VLAN-4-VLAN_CREATE_FAIL: Failed to create VLANs 1006: VLAN(s) not available in Port Manager
SW1(config)#
FAIL. What if we were supposed to use VLAN 1006? Shut it down, enable VLAN 1006, then re-enable the port.
SW1(config)#int f0/24
SW1(config-if)#shut
SW1(config)#do show vlan internal usa
VLAN Usage
SW1(config)#vlan 1006
SW1(config-vlan)#exit
SW1(config)#int f0/24
SW1(config-if)#no shut
SW1(config-if)#exit
SW1(config)#do show vlan internal usa
VLAN Usage
1007 FastEthernet0/24
The switch uses the next number.
http://ccietobe.blogspot.com/2008/12/extended-range-vlan-fail.html

[solved] Digital Camera not recognized in device-manager

My digital camera "Canon Powershot SX120 is" is not recognized by the devicemanager. I have read Digital Cameras.
$ groups
wheel storage users printadmin
The "camera"-Group isn't needed anymore and this group doesn't exist on my system.
The Powershot SX 120 has a MTP/PTP connection mode (as the manual says). But:
# mtp-detect
Unable to open ~/.mtpz-data for reading, MTPZ disabled.libmtp version: 1.1.6
Listing raw device(s)
No raw devices found.
gphoto succeed:
$ gphoto2 --auto-detect
Modell Port
Canon PowerShot SX120 IS usb:002,019
A gphoto --summary could be found here
There is no udev-rule for this camera. If i create one while copying a rule from a similar camera from /etc/udev/rules.d/69-libmtp.rules, and store it into /etc/udev/rules.d/69-canon.rules, the device-manager shows up. My udev-rule:
# Canon PowerShot SX120AX (PTP/MTP mode)
ATTR{idVendor}=="04a9", ATTR{idProduct}=="31e0", SYMLINK+="libmtp-%k", ENV{ID_MTP_DEVICE}="1", ENV{ID_MEDIA_PLAYER}="1"
The device-manager shows me only the option to open with a file-manager. Doing so will result in an error:
The file or folder udi=/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8/ do not exist.
With my udev-rule:
solid-hardware listen
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Listening to add/remove events:
Device Added:
udi = '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8'
Without the active udev-rule, "solid-hardware listen" produces nothing, but
udevadm monitor
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent
KERNEL[5077.662572] add /devices/pci0000:00/0000:00:02.1/usb2/2-8 (usb)
KERNEL[5077.662655] add /devices/pci0000:00/0000:00:02.1/usb2/2-8/2-8:1.0 (usb)
UDEV [5077.681178] add /devices/pci0000:00/0000:00:02.1/usb2/2-8 (usb)
UDEV [5077.693035] add /devices/pci0000:00/0000:00:02.1/usb2/2-8/2-8:1.0 (usb)
Don't know what to do ... is a udev-rule necessary to bring up the message from device-manger? Or is the Camera not recognized as a mtp-device (the Camera has no such settings)? How could i figure it out?
With Digikam i could import Fotos, but i would do so with gwenview. I've tried to check it out with gwenview_importer:
$ gwenview_importer --udi '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8'
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
gwenview_importer: Missing required source folder argument.
(don't care about the different udi, i took this example from a former try) but i don't know, how to find out where the "source folder" is ...
Last edited by quiqueck (2014-02-26 20:10:25)

I have solved this by making an extra udev-rule for my camera. See my adventure on forum.kde.org for details

Dc/dvd drive not functioning and not recognized in device manager after installing Windows 7 OS

I have an HP Pavilion laptop, model # dv9617nr, which was originally loaded (from the factory) with Windows Vista. I upgraded the OS to Windows 7 a few months ago, and initially, everything worked fine. Within the last month, however, my DVD/CD ROM optical drive stopped working and is not recognized in Explorer, and does not show up in Device Manager. I have tried a number of fixes from this forum and the Microsoft Windows 7 forums, with no positive effect. I should note that upon inserting a disc in the drive, everything sounds normal (device spins and the external LED lights up) but nothing happens and the unit shuts down.
I have no idea if this is a software or a hardware issue. I did check the HP website for software and driver updates for my model and the Windows7 OS, but HP has no update for this PC running this OS. ANY help is greatly appreciated.

Hi
Please find the link given below might help you to fix the issue on your unit.
Troubleshooting CD or DVD Drive Detection Problems
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

IPod touch 5th gen will not connect to iTunes, also apple mobile device usb driver does not appear in device manager. PLEASE HELP.

I recently purchased my iPod touch with no issues. After updating to iOS 8.1.1 I found that my iPod would no longer appear in the latest version of iTunes and when I searched for Apple Mobile Device usb driver in the device manager, it was nowhere to be found. I've already uninstalled and re-installed ALL components of iTunes and read every single help article. I've tried everything. What went wrong?

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

Iphone 3g not recognized by computer(s). Windows 7. Charges when plugged into wall, but not PC's. Also not listen in Device Manager. I have hard reset/soft. reinstalled itunes after clean wipe. went through services... help! Windows 7

Hello all. My system is Windows 7 64bit. In the past my phone worked just fine, plug it into a usb slot, synced up, updated... but for months now it has not worked. Other Iphones will not work on this PC either with their corresponding cables. But my Iphone will also not work when plugged into other computers.. it will not show up at all.. no charge.. no itunes... no drivers show up in Device Manager. My phone works just fine when plugged into the wall with it's cable.. charges fine everything works.. but it will not charge when plugged into a computer.
So far... I have uninstalled everything related to apple... ran ccleaner.. fixed registry errors. Reboot PC, reinstall all itunes and apple components (all latest software) and nothing.
I have gonet o services and stopped and started apple mobile device. It is set to automatic.
I have hard reset the phone and soft reset it.
The cable obviously works. The Phone works when plugged into the wall.
Other Iphones will not work on my pc, nor will my iphone work on theirs
I have disabled windows firewall along with my Comodo Defense Plus and it's firewall. I have disabled my AV. I have scanned with ad aware plus, Avast, ran hijack this and fixed registry errors. Ran Ccleaner.
My device manager does not have anything related to apple in it.. I have no idea why. My Device Manager has no portable devices detected at all and does not recognize anything related to the phone.
Core 2 duo 6600
2gigs of ram
Windows 7 64 bit
I have checked all the tech support stuff I can find. I am desperate. Apple will not help me on the phone without charging me 30$.

Also.... my phone works and can do everything fine when not plugged in.. I just can't get my computer or others to recognize the darn thing when plugged in!

T430 NVidia GPU not listed in device manager

Hello -- I have a problem regarding the NVidia NVS 5400M inside the Thinkpad T430. I use Windows 8. I'm not exactly sure how it happened, but the NVidia card no longer shows up in Device Manager and the NVidia driver (both the standard driver from their website AND Lenovo's Optimus driver) refuses to install, complaining it can't find any compatible hardware. Device Manager does not list any graphics cards or unknown devices, and as far as Windows is concerned the NVidia card does not exist.
Here's a summary of what I see:
In Discrete Graphics mode -- my Linux installation (which uses native NVidia drivers) works fine and uses the NVidia card. Windows 8 boots and runs with a generic graphics driver; there is a performance hit, and no graphics cards or unknown devices are listed in Device Manager. That's the problem I want to fix.
In Optimus mode -- Windows 8 boots and runs with the Intel integrated graphics (Intel HD Graphics 4000) which is listed in Device Manager. Again, no other graphics cards or unknown devices are listed.
I appreciate in advance any help towards getting the NVidia drivers installed successfully!
Solved!
Go to Solution.

nsrathjen wrote:
Yep, still doesn't appear that the NVidia drivers from that package are installing. If I boot in Optimus mode, only the Intel card is shown in Device Manager. I'd like to not have to use Optimus and just stay in Discrete Graphics mode if possible because Linux support for Optimus is not very good.
Would completely uninstalling all the drivers possibly help?
Before you go through that hassle, try the following:
1. Go into the BIOS Configuration Display setting and change it to Discrete only. If you see a setting just below display that talks about OS detection, disable that as well otherwise it will try to flip back to Optimus. F10 to save and exit.
2. Go back into the BIOS settings and verify the setting was really saved. Exit the BIOS settings (discarding this time) and boot Windows normally.
3. Go to C:\DRIVERS\WIN\VIDEO\NVIDIA and run setup.exe. Use the Custom option for the mode after it does compat checks and asks for you to agree to the EULA.
4. When you see the list of custom installation options, turn on the "Perform a clean installation" checkbox. This should not present a problem if you don't have custom profiles.
See if that works.

1394 net adapter not working in device manager

I,m running the KT4 Ultra with fire wire on board with XP prof. Every thing is working fine except in device manager I have two listings for the 1394 net adapter.The first has the yellow explantion mark, Code ten."this device won't start. And the second is working but listed as 1394 net adapter #2. On the adapter it has two bhig ports and one small port.I quess the small port is for cam corders. Can I disablr the first 1394 in device manager and just keep the second one. I don't have and fire wire cables so I don't know if the adapter is working on all ports. Thanks Bruce
KT4 Ultra/Lan
2800 Barton/333
ATI 9700pro
Creative augll plat.
512 Kingston 2700 DDR

BIOS->Advanced- see if there is tab like Intel Ethernet ........... Go into it if it is there, and see if it shows if adapter is connected or not (Not link connection as this will bne disabled)
Take adapter out and see if it has bent pins, as this might bre causing the issue. If all fine, get it bnack into the slot for it and take motherboard out of the case and test on non conductive material (motherboard box is ok, NOT Anti conductive bag). Also >>Posting Guide<<, and you could also try second BIOS (little switch, flip it when PC is OFF)

Biometric is not available in devices manager

Similar Messages

Maybe you are looking for