Biometrical

Hi
I have an biometrical terminal , i want to know how to call the javacard method in the way to use the biometrical authentification and to save it on the card
Is it someone here who have any idea
to recup the byte return by the terminal
for a biometrical identification
thanks
regards

thanks for answer
i have already read some part of the java_card_kit-2_2_2-fr-spec.zip , i have found this package javacardx.biometry.BioBuilder
but i don t know why , when i try to do an import javacardx.biometry.BioBuilder or javax.biometry.BioBuilder , eclipse doesn t find it !
do you have an idea .
thanks
regards

Similar Messages

I upgraded for Firefox 4 and now my simplePass identity protection (biometric scanner) on my laptop will not work. WHY? It still works with IE but I don't use IE.

I upgraded for Firefox 4 and now my HP SimplePass Identity Protection (biometric scanner) on my laptop will not work. WHY? It still works with IE but I don't use IE. It worked with the previous Firefox version but now when I use the internet, it doesn't even acknowledge I have the scanner. When I run my finger over it, it opens the settings panel but does not allow use of the already saved information or allow new information to be entered. I need this corrected. Any suggestions?

I asked this same question, and just received a response:
"Thank you for contacting DigitalPersona. There will be no update releases
for DigitalPersona Personal in the future. There will be no updates for
Firefox 4 nor Internet Explorer 9. IF they work they work, if they do
not work with DPPersonal, then you will have to decide to either keep
DPPersonal and forgo Firefox 4 or IE 9, or vice versa. DigitalPersona
is leaving the consumer market and is focusing on business applications.
In fact, DigitalPersona Personal will not longer be supported after
Mid-April of this year.
We apologize for any inconvenience this might cause. Sincerely, Tech Team "
In other words, there will be NO update.

Biometric Reader no longer works on my Envy 17-j092r Laptop

Hello Consumer Support Forum
I purchased a new HP Envy 17-j092nr Laptop about 15 months ago that came with a biometric (finger print) reader. I just recently had to re-install the operating system and when I did that my finger print reader no longer lights up (blinks) indicating that it is reading my finger print. I remember before I re-installed the operating system under device manager I use to see a catagory "Biometric device" which contained the necessary driver for the hardware. When I look at my device manager now there is no folder for Biometric Device. I believe what I need to do is to download the driver but I have looked everywhere under HP drivers and not able to find it. I also would think when I boot my computer that it would detect that I have a biometric reader and automatically download the driver.
Any help on this would be greatly appreciated.
Thanks,
Jim

jblackst2800
Welcome to the HP Community Forum.
There are two parts to the fingerprint logon with Windows 8.1 - the Native fingerprint logon Biometrics for Windows logon -- and the ability to support Third party software, in this case, HP SimplePass.
The Native fingerprint logon is a feature of Windows 8.1 -- if it is still part of your Operating System, the infrastructure might show up on Programs and Features as Validity WBF DDK -- if you see such, Do Not delete it, not even should you get excited later and need to reset, reinvent, or reinstall your HP SimplePass environment. This is not related to your HP SimplePass and you need to leave it be.
=========================================================================
Your computer's Support Pages:
HP ENVY 17-j092nr Notebook PC
You can use this Validity Driver from your notebook's Support Pages:
Validity Fingerprint Sensor Driver
The HP SimplePass program you need is in the following file along with the instructions for installation.
==========================================================================
READ the first page -- nothing is garanteed. You can heap blame -- this software can be stubborn. Smiling.
Open the file > Click on Download > Click “Open in Adobe Reader”
Instructions to Upgrade HP SimplePass
Follow:
Procedure - Update / (Re) Install HP SimplePass
Reminders:
You will be using Series 6 HP SimplePass; ignore references to Series 8
Pay attention to Order of Events...
I hope it works.
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Thinkpad T43p (2668-G4G) Network Controller and Biometric Coprocessor issues on Win XP Pro install

Hi all,
I am new the the forum but I guess its time time to recognise my defeat and send out a distress signal: Mayday Mayday Mayday...
INTRO
My original HDD (Hitachi 7,200 rpm IDE) crashed a few days ago so I repaced it with a WD 160GB drive (5,400 rpm). I always get a firmware message on start up and I could only partition 130GB (not the full 160GB). This I have read from various forums is a common problem with the Thinkpads and that it wont really affect the performance of my T43p... any comments?
THE REAL PROBLEM
I then restored the laptop with Win XP Pro and SP2+SP3 and all relevant updates (I have done this on numerous times and once before with this T43p without problems) and then setup all the Lenovo Drivers I could find pertaining to this model [2668-G4G]. I've got everything up and running EXCEPT the Wifi. I've tried everything but just cant get it to work. I used System Update, I tried downloading and installing in different order, I've removed the Access Connections etc. etc. None of the Drivers on the Lenovo website seem to work for me. I even tried using older versions of the Drivers, which I compiled on a CD last time I restored my T43p but even that doesn't work. When I check the Device Manager there are always two yellow alert signes referring to Biometric Coprocessor and Network Controller.
Has anybody had these problems before and managed to resolve them?
The HDD issue is not as crucial I guess but if anybody has a solution to that I'd be greatful.
Johann
Solved!
Go to Solution.

Welcome to the forum!
Your wireless driver:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/6hwc05ww.zip
After downloading it, you must go into C>Drivers>Win>Wlanint and run the setup file from there
FPR:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70064
Follow the instructions on the download page.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Biometric device is not showing up in the control panel

hello,
i'm using elitebook 8440p. earlier i was using win 8, my biometric device was runnig fine. But when i begant use win 7, it started showing unavailable in the control panel. So I reinstalled it, now it is not showing up in the control panel too...however it is showing in device manager. and also there is no any application naming simplepass is present in my 'program and features' item of control panel. plz help.

See the second box of Troubleshooting issues with iTunes for Windows updates.
tt2

Touch ID - Biometric reader with problems and no solutions

I have an Iphone 5s Model 1457, after upgraded to iOS version 7.1.2 the biometric reader stopped working. I upgraded to IOS 8.0.2 and continues in the same situation. Already reset all settings and not solved. What should I do? Does the apple can solve this problem for your client?

I will answer Question #3:
I'm not sure if I understand exactly what is
happening. At first I thought you meant that you couldn't even add the second part of the association clause. But, later it sounds like you were able to add the second part of the clause (namely "address.bptype =
'c'") and that you are experiencing some runtime error.
Assuming the latter (that it is a RT problem), I take it this
"...cannot be resolved" error is the error with code 27020.
Under normal error conditions, you shouldn't get this error. Something "unusual" (or unforeseen by us) is happening if you are getting this error. Anyway, if you wrote your own client code, you should wrap a try/catch block around it, pick out the detail exception, and see what's going
on. See the example code below:
try
... make call that causes the exception ...
catch(oracle.jbo.AttrSetValException ex)
// Print stack trace for the outer ex
ex.printStackTrace();
// Get the inner exception
Object[] details = ex.getDetails();
if (details.length > 0)
Exception innerEx = (Exception) details[0];
// Now, print the inner exception's
// stack.
innerEx.printStackTrace();
This will help shed some light on the exception and the cause of it.
John - JDeveloper Team

Biometric devices=Problem

HI, Last year in October I purchased an Pavilion dv6-6167cl, everything was just fine up until the last bios update, after that the integrated biometric device stopped working. When i go to device manager the device shows up and says it's working properly, however the light is not on, on the device. Also when i use HP Simple Pass (Version 5.3.7) it will only allow me to use my master password to login. I've tried all sorts of trouble shooting. but none have prevailed (which makes me sad because, I loved my fingerprint reader...)
Also when i go to control panel and look under biometric devices it says "Windows did not find any biometric devices on this computer. You might need to attach your device or install device drivers." and when i look in bios during the start-up, under "System Configuration" biometric devices is not listed.
i could really use some help here it would be greatly appreciated.

So...I went back and looked at my post...and thee were 31 people who looked at it...however...there were no ideas at least on how to fix it...I though that at least one person would at least have an idea about how to fix it... but it appeas that hp doesn't know what they're doing anymore.

Drivers for the Biometric Coprocessor for the ThinkPad W530

I am looking for the drivers for the Biometric Coprocessor for the ThinkPad W530 running Windows 7 (64-bit). Can anyone assist with this? Thanks!
Solved!
Go to Solution.

http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS029769
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Windows biometric framework - Bad Capture Images

I'm developing a .net application, which is necessary to obtain the image of a fingerprint through a biometric scanner.
Now I am using the following code:
https://msdn.microsoft.com/es-es/library/ee207405(v=vs.85).aspx
This we supplement with the proposal in this posthttps://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/f6f09403-e0b6-4977-b697-d5aabeb5b8ff/how-to-convert-winbiobir-data-into-image-using-windows-biometric-framework?forum=wdkto
to obtain a jpg image.
So far so good, but I found the problem with wbf the image is cut off on the sides,
I show examples (I show only the edges):
In this example, the image is cut on the left and right, but sometimes also makes it up and down and not very regular shapes, my theory
is that short sections where the image does not have a very good quality, but my case is important that information.
The image on the left is taken with this method, while the right is taken with neurotecnologic (same scanner).This
may seem minimal, I validations traces difficult as cutting your image removes some features on the edges,
so sometimes you have to repeatedly move your finger across the scanner to validate.
My question is if this is a problem Framework or is there some parameter in the capture function that allows me to return the whole
picture?
Regards Dario

Anybody ?
-R___K

My Biometric Scan is not working

mine is HP ProBook 4445s Notebook PC with windows 8 and my biometric scan is not working every time i open it, it says device not found and on my laptop finger scaner is provided

does any body knows about it

Biometric solution in apex oracle

Hello Sir,
I want to access bio metricc feature in Apex application . How can be use it and do any connectivity or through any procedure .
hw can we attached biometric system to apex oracle application . Plz give me any solution .
Thanx

I haven't done this before but it's something that has crossed my mind.
Do you need it for authentication purposes?
Kofi

Help needed to solve Biometric problem

Hi, I tried to execute example defined in JCBiometricsAPI_WhitePaper.pdf [which you can get from www.javacardforum.org/03_documents/00_documents/fileload_02.pdf] in biometric supported JCOP31 card. Where they are using password as the biometric template type. And here am able to upload the password into the server applet, but when I try to call the match method defined in the Client applet am getting 6F00 error message. please help me to resolve this.

Does anyone able to execute the example program successfully defined in www.javacardforum.org/03_documents/00_documents/fileload_02.pdf

EliteBook 8570p Fingerprint Sensor Issue and Windows 8 and 8.1 Built-In Biometric Framework

Hello there,
i'm currently testing the Preview Build of Windows 8.1 on my HP EliteBook 8570p and have a small Problem using the Fingerprint... but back to start...
In Windows 8 there wheren't any microsoft builtin biometric framework, to get the fingerprint there you have to install the hp security protect manager, and the validity Fingerprint Driver from here:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=de&cc=de&prodTypeId=32...
the actual version that the site above state is this: 4.4.228.0 (31 Okt 2012)
the filename of the fingerprint driver should be this: sp59624.exe
exactly this is what i download, but then upon extracting and "older?" SP-Number appears? -> SP58152 ????
Driver should have Win8 support, but on installing it it just says it supports Win7 max... another hint that the driver packet is wrong packed...
this is the first thing what is very strange, even, the driver won't install automatically... just manuall, this is also a non WBF (Windows Biometric Framework) driver, so ne built-in fingerprint support of win 8.1 does not work.. indeed with the hp security manager... but when using the fingerprint login there i see just ugly Windows Vista branded Loginmasks... not a real choice..
after a bit of google seach i then found a new version of the validty fingerprint driver, but this is not listet in the 8570p Model download page... just found it with the help of google..
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=de&lc=de&dlc=de&softwareitem=ob-109892-1
this one have a newer version: 4.4.234.0 (2012-09-07)
interessting thing about this... newer version, but older release date... ?!
and it is a WBF driver, voila, i thought...
installing the driver via the device manager (VFS451) and Windows 8.1 is able to scan fingers for login or credentials requests... works quite well... until first reboot... sadly after the first reboot, windows just continously means that a finger is getting swyped acrous the fingerprint reader, but it isn't...
after deinstalling the device, and reinstalling it (and driver) the fingerprint reader works again still the next reboot...
any help is appreciated and HP PLEASE do something about all the issues with the fingerprint readers even in Windows 8 (and/or correct the download)

Hello DaStivi,
Your EliteBook is a Business model. Your issue would be best answered on the HP Enterprise Business Community Forum
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Error code 43 - Biometric stop working (Authentec)

My equipment: HP Pavilion dv6-7070sw Entertainment (still on warranty)
I have a problem with biometric hardware. It stopped working without any reason. I could log in the system, but when I tried to use it to log in to my e-mail website it stopped working. LED does not light. It's totally dead. There is an error in device manager "Unknown device". Biometric device is missing. Reinstalling HP Simple Pass and drivers using HP Recovery Manager didn't solve the problem. I see only information that Windows shutdown device because of error code 43. I don't see any information about HP drivers for biometric equipment but only Windows drivers. I unistalled device throughdevice manager and HP Simple and install it again (with update from HP Support Assitant), installation was complted correctly, but it doesn't solve the problem. It seems that biometric device is dead and HP Simple is ok.
When I try to intall driver manual through device manager I see Windows information that device already has actual drivers (what is not true).
This is Authentec fingerprint device or Validity sensor (in HP Simple Pass I see Authntec but i HP Recovery Manager Validity Sensor).
What I should to repair biometric device?

I have managed to remedy this problem by looking at my usb devices in your device manager (go through Control panel / System). Look for the device with the little yellow triangle with the exclamation mark. High light it and delete it. After a reboot, your biometric should be operable.

I don't know how to use the WBF(windows biometric framework),who can help me ?

I need to use the WBF to write a fingerprint guidline,but i don't know to do ,is there anyone who can help me ?

I need to use the WBF to write a fingerprint guidline,but i don't know to do
Start here:
Windows Biometric Framework API
http://msdn.microsoft.com/en-us/library/windows/desktop/dd401509%28v=vs.85%29.aspx
Biometric Devices
http://msdn.microsoft.com/en-us/library/windows/hardware/ff536448%28v=vs.85%29.aspx
Designing Windows Biometric Framework fingerprint management applications
http://msdn.microsoft.com/en-us/library/windows/hardware/dn613904%28v=vs.85%29.aspx
Also see:
Windows Desktop Development > Application Security for Windows Desktop
https://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/home?forum=windowssecurity
"Require fingerprint authentication to retrieve data?"
https://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/667b91ee-820d-4759-902c-4163ed3d2859/require-fingerprint-authentication-to-retrieve-data?forum=windowssecurity
Windows Desktop Development > Development with the Windows Sensor and Location Platform
"What conceptually is a sensor?"
https://social.msdn.microsoft.com/Forums/vstudio/en-US/edd0c260-2dcb-4225-904c-42f355a6e43e/what-conceptually-is-a-sensor?forum=windowssensorandlocationplatform
- Wayne

Wndows did not detect any biometric devices on this computer..

I have an HP ProBook 4540s running Windows 7 Professional w/IE11. I had to do a clean install of Windows 7 Pro and since then I cannot get my fingerprint reader to work at all. In my Control panel, under Biometric Devices, I recieve the message "Windows did not detect any biometrics devices on this computer". However, under Computer , Properties, Device Manager, Biometric Devices, the is Validity Sensors (WBF) (PID=003d).
I have tried to update, uninstall, re-install HP Simplepass, drivers, etc from the HP website, but nothing is working. Also I cannot find exactly what fingerpriint reader hardware is installed on the computer even though it is physically there as part of the original configuration.
I appreciate any assistance in resolving this issue.
Mark

Hello Mark531,
Welcome at the HP forums,
Are you searching for the following driver?
http://ftp.hp.com/pub/softpaq/sp64001-64500/sp64338.exe
Winos.
The doors of wisdom are never shut. Benjamin Franklin
We must use time wisely and forever realize that the time is always ripe to do right. Nelson Mandela

Biometrical

Similar Messages

Maybe you are looking for