Biometrics reader not working

Doe snayone know how to get the biometrics scanner\finger print scanner to work with Windows 7??? I have installed the driver_fingerprint_upek_TC00237700A.exe on my Qosmio F45.
Thanks,

Your computer is an Enterprise/Business/Commercial model. As these are the consumer forums, I would recommend that you post this in the HP Enterprise Support Forums for better coverage.
You can access the enterprise support forums at the following link.
http://h30499.www3.hp.com/
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

Why does my card reader not work on my iPad since upgrade?

I use my iPad mini to download photos from my camera when I'm on the road. In the summer I bought the "3 in 1 Card Reader Adapter Cable Camera Connection Kit, 3 Port Card Reader for iPad 4 and iPad Mini by Eurekka" and it worked wonderfully. I was able to download photos (jpg and RAW) directly to the iPad and off the camera, and once home it was a flawless upload to my iMac.
However, once I upgraded to iOS 7 last week I get a message saying the device is not supported. What gives? Will this be fixed or will Apple products only accept Apple accessories from now on?

No but I was just trying to find a way in to your help desk. I didn't find
your web page very helpful in this regard.
Douglas Whiteley
In a message dated 10/05/2012 20:43:50 GMT Daylight Time, [email protected]
writes:
Re: why does my adobe reader not work
created by Claudio González
(http://forums.adobe.com/people/Claudio+González) in Adobe Reader - View the full discussion
(http://forums.adobe.com/message/4395059#4395059)

In my macbook pro hdmi, usb & SD card reader not working

In my macbook pro hdmi, usb & sc card reader not working.
i have tried the SRM reset done, till not working started.
Could you please resolve this problem,

Welcome to Apple Support Communities
Simply take it to an Apple Store or reseller if it's in warranty. Your Mac will be repaired or replaced for free because it looks a hardware problem rather than a software issue.
If it's not in warranty, hold Command and R keys while your MacBook is starting up, and reinstall OS X. If it doesn't work, you can't do much more to solve the problem

HP ProBook 440 G2, Finger print reader not working when I upgraded form Win 7 Pro to Win 8.1 Pro

My HP ProBook 440 G2, Finger print reader not working when I upgraded form Win 7 Pro to Win 8.1 Pro.
In device manager showing that biometric reader is working properly. But actually the finger printer reader is not reading or senseing. It seems like "dummy" part. Please help me to correctly configure step by step for this issue.
thankyou
Hillet
This question was solved.
View Solution.

Have you installed the Validity Sensor Fingerprint driver software for Windows 8.1?
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943811&swItemId=ob_134806_1&swEnvOid=415...
See page 64 in the following Windows 8.1 user manual for Validity Fingerprint setup information
http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=6943810&docId=emr_na-c04371762&docLocale...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Adobe reader not working after cs5 install

adobe reader not working after cs5 install

Nobody can tell you anything without proper system info or other technical details like exact version info.
Mylenium

My sd reader not working on my macpro anymore

My Sd reader not working on my mac pro anymore?

i am having the same problem with my new macbook pro i had to go get a USB SD reader

Have adobe reader 8.3.1 windows xp sp3 reader not working right and it wont let me remove or update

I have adobe reader 8.3.1 on system windows XP SP-3. Reader not working correctly but it wont let me remove or change. I down loded Reader XI (11.0.2) but it will not open because of reader 8.3.1. How do I deactivate 8.3.1 and remove it? Reader 8.3.1 installed 9/14/2011. update ID (AC765BA86-7AD7-0000-2550-7ABC-40000831)

You can try using this tool to remove all traces of previous version(s) of Reader:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you may download the offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else.

Z61t SD card reader not working?

z61t SD card reader not working?
Tried the Vista driver and still not working.
Same for camera.
I am running Windows 7 64bit and using TVSU v4.0 as well as manual attempts to update.

I am running windows 7 home 32 bit and can not get the sd card reader driver to load either. Any help?

Pavilion dv6 sd card reader not working

I have searched the boards and have not found an answer to my built in SD card reader not working any more. It worked fine until a couple weeks ago. When I go to "my computer", the sd card does not show up as an available drive. I have tried several cards with no luck. The cards work fine when I use a USB card reader, just not the built in one.
I checked the driver in device manager - at least the one I believe is the correct one - Realtec PCIE Card Reader.
Any other ideas? It is a pain having to carry around an extra card reader. Thanks for the help
rv9a
This question was solved.
View Solution.

Good morning rv9a.
Prior to the uninstall did the computer make a noise to indicate it recognized the card when you put it in?
You should go ahead and reinstall the specific driver for the card reader just to make sure that doesn't have an effect on the issue. Here is the link for Windows 7 and here is the link for Windows 8.
Another possibility is the the Plug and Play service is deactivated. Try the following to check.
Press the Windows+R keyboard shortcut.
Type "services.msc" into the box and click okay.
Scroll down until you find "Plug and Play" in the list.
Ensure that it is started. If it is not right-click on the service and select Start or Enable.
I'll keep an eye out for your response; have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Sound issues; slow response; usb ports unreliable and sd reader not working

The PC is a HP TouchSmart envy about 18 months old. Soon after purchasing I upgraded to Win 8.1.
About three or four months -ago probably after a Win update was installed- I began to have Sound issues (including not able to conect my external powered speakers any more- they used to work brilliantly and initially no sound at all but I went into settings and changed something and every now and again I have to do that again to get the PC speakers to work) ; slow response; usb ports unreliable, sd reader not working- as well as issues with the internet - the modem actually. It is easier to get on to a tablet and use the internet as my PC can be really slow. As well I have uninstalled Chrome and am using Explorer as this seems a little better but I miss Chrome.
I was advised by tech at Hervey Norman that I had to do a complete system restore but in order to do that I would need the recovery discs from HP? Is that correct? How do I do this?
PS I did not make recovery discs when I first purchased the machine. (Very sad!!!)
Help!!!
Alfriston

Hi again Alfriston,
Thank you for the clarification!
To return your computer's audio back to functional order, I recommend removing the audio driver from the operating system previous to upgrading to Windows 8.1, and installing the driver provided in this link.
If re-installing the driver does not resolve the issue, I suggest following the steps in this document on No Sound from the Speakers (Windows 8).
In regards to the USB ports, I recommend following this resource on Troubleshooting USB Connections (Windows 8), which should help consistently connect your USB devices to your computer.
To prevent your computer from lagging or responding in a slow manner, please follow the step in this document on Resolving Slow System Performance (Windows 8) to help improve the speed and efficiency of the operating system.
To further diagnose the issue with your desktop's SD card reader, I recommend following this resource on Using and Troubleshooting Memory Card Readers (Windows 8).
If your desktop still experiences issues with the audio, USB connections, speed and performance, as well as the SD card reader, I recommend returning your system back to a previous restore point. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 8).
Should the problem continue, I suggest performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 8), as well as Performing an HP system recovery (Windows 8). This should return your system back to factory defaults.
If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Card reader not working out the box scr 3500?

cac card reader not working out of box scr3500 help

Welcome to discussions Kevin!
I'm sorry to hear that first of all make sure that there is nothing sick on the eye of the camera it self, after that how is the lighting on the room that the computer will be set up? did the green light came on when you're trying to use iSight? i'm asking because the same thing happen to me but it was nothing but bad lighting in my office. If this doen't help call apple asap they should replace your computer with out a problem. Hope this helps good luck!
Miguel

Fingerprint reader not working and cant drag icons after windows 10 update

fingerprint reader not working and cant drag icons after windows 10 update

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I read your post about the Windows 10 update, and wanted to assist you! To start, can you please provide me with the Product Number of your notebook? Here is a link you can use that will help you find your Model and Product Number: How Do I Find My Model Number or Product Number? In the meantime, I recommend using the Go back to an earlier build option, in your System Settings:
HP Notebook PCs - Upgrading to Windows 10
Once you are back to your original Operating System, check to see if you are experiencing the same issue. If not, then you may consider holding off on the Windows 10 update for a few weeks, until drivers can be updated. Please let me know if this information was helpful by clicking the thumbs up below.
Have a great day!

Fingerprint reader not work... windows 8.1

when i recover my system fingerprint reader not work... plss help...

Hi @michaeltamayo18 ,
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that after doing a recovery your fingerprint reader is not working,
From your screen shot Device Manager is showing no issue with it.
Have you ran the HP Support Assistant to assist with locating HP updates and drivers?
Have you done all your Windows updates?
To assist you I will need some more information.
What exact model of HP notebook do you have? How Do I Find My Model Number or Product Number?
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

SimplePass and FingerPrint Reader not working - Win 7Pro 64Bit

I have a Envy DV7-7212nr which has been running flawlessly with Windows 7Pro for the past two years. Fingerprint reader and SimplePass has been working fine. Last week I downloaded from the HP support site for this notebook the updated SimplePass.  After removing all passwords from the account, uninstalling the old software and driver and updating with the HP software, it quit working to the point where I couldn't even log in to my computer. I finally got in under administrator and had to manually remove and uninstall the SimplePass software and edit its entries out of the registry.
I can now get back into my laptop fine (no password protection). Following the advice of the HP Tech via chat session I again ninstalled the driver listed under Biometrics and uninstalled the software and downloaded the SimplePass from the HP Support site with upgrades listed for this machine. The Tech took over the machine and tried installing and re-installing and then finally said it was a hardware issue. I don't believe it's a hardware issue in that at the Windows Login Screen, if I swipe my finger, it recognizes the swipe but then gives an error message that there is no fingerprints associated with the reader (or something like that).
If I back out and just login without the reader and launch SimplePass (Authentec Version 6.0 downloaded via HP Service Pak) - 2013-04-05 , Version6.0.100.272, 66.44M - SP61399, the splash screen opens and says DOWNLOADING DATABASE - and nothing else happens. It then pops up an error box labeled IESiteLogin.exe with an EXCEPTION ERROR.
White lite on reader never comes on. Driver details says all is working fine.
Repeated un-installs and re-installs have no effect.
I no longer have the original SimplePass and Driver filed so I can't revert back. Can someone please offer a solution or provide a URL that will allow me to download the original SimplePass and Validity drivers so I can get this working again?
HP's download caused the problem - I would think they could fix it.
Thanks in advance.

thx1326,
I am sorry the Driver did not work.
You might try the Hard Reset procedure below to clear the device cache and allow the driver a better chance to set into place.
thx1326 wrote:
Ok... so the validity driver did nothing. Shows fine in device manager - but nothing. If i install SimplePass, as soon as it finishes installing and everytime I try to run it... I get the pop up window above.
Worst of all... don't you think it is deplorable that no one from HP has bothered to offer help?
Their tech support is really almost non existant. The tech support person that called me back today kept trying to say it was all my fault for downgrading to Windows 7 and that they don't support Windows 7 and it was my problem. I finally had to politely ask him to shut up and listen and answer me if they don't support Windows 7, why do they offer driver and software updates for Windows 7 on the support page for this laptop... of course he had no answer for that. Another 30 minutes wasted that I will never get back.
Thanks again for any help.
Commentary
It is always unfortunate when a system does not respond to an Upgrade or Downgrade of the Operating System in the way one hopes.
There is no guarantee that there are Drivers for every model and for every version of the Operating System that one wishes -- changing the Operating System from that of the originally installed version is the responsibility of the owner. Demanding otherwise is futile.
===========================================================================
Driver Options - Windows 7 dv7-7200 series
HP SimplePass Series 6 requries a Validity Driver minimum version: 4.3.0.205
To try a different Driver:
First >> Fully Remove any existing Driver
Windows 8       Windows key + X > M (opens the Device Manager) >
OR
Windows 7       Control Panel > set icon view > Device Manager >
Open category Biometric Devices >
Right-Click on Validity Sensor Driver > Uninstall > in box > Click Delete
Next >> Perform the Hard Reset
Create a Restore Point:   Create a Restore Point – Win7 OR Create a restore point Win8
Close all your programs and shut down the computer
Disconnect everything (little Unifier for the keyboard / external mouse can stay)
Perform the Hard Reset for your notebook model
Boot the computer and log in
Reminder: Hard Reset is just a device Reset. The procedure does not wipe out your files nor does it destroy your Windows setup in any way. This type of reset "clears the cobwebs". Depending on the root cause of the problem, this procedure can fix a variety of computer glitches.
Next >> Install the replacement Driver
Try one of the following drivers:
Validity Sensor Driver sp53369 V4.3.205.0
Validity Sensor sp54484 - V4.3.205.0
Restart / Reboot the system
===========================================================================
Other Option
I suggest you use System Restore to recover the Validity Sensor Driver you must have been using for the past two years running Windows 7 and HP SimplePass version 6.0.100.272.
Restoring Windows to a Previous Point (Windows 7)
===========================================================================
I fully support the good people at the HP Response Center.
I respectfully withdraw at this time and wish you well.
Click the Kudos Thumbs-Up to show you appreciate the help.
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Click Accept as Solution when the Answer provides a Fix or Workaround!
Kind Regards,
Dragon-Fur

USB memory card reader not working since latest security update

Hi, I have an iApp CR-e500 multi-format memory card reader; worked great prior to the latest security update. Now every time I plug it in I get the following errors in the console:
Oct 19 03:37:00 dachshund kernel[0]: USBF: 1496.818 AppleUSBEHCI[0x1b4d800]::Found a transaction past the completion deadline on bus 91, timing out!
Oct 19 03:37:00 dachshund kernel[0]: USBF: 1496.826 AppleUSBEHCI[0x1b4d800]::DoIOTransfer - error 0xe000404f queueing request
The reader works fine on my office Windows laptop and my USB pendrive still works on my Mac, so the USB ports appear to be functional; they just don't like this thing anymore.
Was there a USB driver change? If so is there anything I can do to sort this? I suppose I could just buy a new card reader if someone can confirm one that works with the latest security update of 10.4.11, that would be great.
Alternatively if Apple could please loosen up whatever they tightened in their USB drivers that would be nice as well...

Disregard. Looks like it's the memory card I'm trying to mount; not working on the Windows machine either.
Sorry!

Biometrics reader not working

Similar Messages

Maybe you are looking for