Bionic to Razr, replace first Razr and sim, with new Razr and Sim.  All service loss.

I would like to say that the era of smartphones has been both fun and expensive.  Having computers in our pockets is an amazing breakthough in technology.  I used to have both the Droid, and I also got the Droid 2 when it came out, my next purchase was the Bionic, and that's where my problems started.  The 4g would drop all the time, and it wasn't much of an inconvenience because usually it would come back on if I waited a little bit.  I'm patient most of the time unless I need directions somewhere and then I get a bit angry.  So I researched on the web and I tried all the tips and tricks and other things you can do to see if you can fix the problem to no avail.  I would check in from time to time and found out that it was a known issue, so I called up and just like I heard I could get a free replacement phone the Droid Razr which had come out directly after the Bionic.  I got it in the mail and it worked for about 20 minutes before losing all service(not just the 4g), and this happened every 5 to 10 minutes for the next couple days, so I got drunk and planned on yelling at some poor verizon person, but she was so nice and offered to send me out a new phone, so I decided to be nice back.  She said I should make sure to send in my Bionic so I didn't get charged, but I said how about I send in the ****** that you sent me instead and keep my original.  I got the new one a couple days later, and it seemed to be ok for the first few days, maybe I was just lucky not to notice.  It does the same thing as the other one, and I am about to lose my patience.  I want a solution to my problem.  Is there anyone out there in Verizonland that can give me a solution that doesn't involve (because I have already done all these things multiple times) resetting the phone to factory default, clearing the cache, the motorola reconnect app, power cycling the phone by holding the power and volume down keys, or as i mentioned above getting a new (used and probably sent back in because of the same problem) phone and sim card?

Same as before, the service drops to zero, has the universal no sign over the bars.  The screen kicks on and it starts to build up to 4 bars, then white 4g, blue 4g, and it does that oh I would say every 10-30 minutes or so when I have had it sitting there while on my computer.  If I am on Netflix watching stuff it doesn't drop, like once I have engaged the 4g and am using it I don't have problems with it.  I have had a couple of calls drop, and in a text conversation it has just dropped to zero while I was typing a response.  I am not sure about maps, it's usually off when I want to try to find something so I have to wait for it to kick in to give me a route, which is by far the most irritating thing in the world when you are in unfamiliar territory.

Similar Messages

  • Slow Transfer and Downloads with new SSD and Fresh OS

    I have a brand new Solid State Drive and maxed out the RAM in my Mid 2010 15 inch MacBook Pro. The new hard drive made all the difference in the world. But having never done a clean install since the start, I was having issues with some of my older applications. I decided to clear the hard drive and reinstall the OS and discs for Final Cut Studio and my Adobe products. Everything runs smoothly, but only now, when I try to copy from a external drive, whether FireWire or USB it takes exponentially longer to transfer. Same goes for downloading content from a FTP server. Basically anything that is generating new files/data onto my hard drive. This wasn't the case until I re-installed the OS (Had Mavericks before and after the install).
    Any idea what this issue might be?
    My hard drive is a Samsung Electronics 840 Pro Series 2.5-Inch 512 SATA Solid State Drive MZ-7PD512BW
    And as I stated, it worked perfectly before.

    Jay,
    my thoughts were that with Trim command support disabled,  when you’d reïnstalled OS X and your apps and personal files, that your SSD might have gone over 75% full, at which point SSDs’ performance start to slow down. (Without Trim command support, the SSD needs to be “told” manually to reuse space which has been freed up by deletion.) If that is the cause of your current slowdown, then you wouldn’t start noticing a difference until your SSD has run out of previously unused space; at that point, a Trim command would be run on the SSD to make available that previously used space. In the interim, I guess that you could try selecting your SSD in Disk Utility, then select the Erase tab, then press the Erase Free Space… button to see if that would work as a manual substitute for a Trim command. Alternatively, you could try creating dummy files to purposely fill up your SSD nearly to capacity, and then delete them to see if the Trim command will make available all of the space for all of the previously deleted files (i.e. not just for the deleted dummy files).

  • My keyboard desapears every now and them with new batteries, and it takes some time to recover it

    the keyboard stops working suddenly and the computer can´t find it for a while, in spite of the new batteries in the keyboard. after some time it returns and works again

    Please read and use Apples Troubleshooting wireless mouse and keyboard issues article.

  • Replacement price of iphone 5s with new one

    replacement price of iphone 5s with new one

    Out-of-warranty repair service
    If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
    Read Apple’s Repair Terms and Conditions
    Model
    Out-of-warranty service fee
    Battery service*
    iPhone 6 Plus
    $329
    $79
    *available only if battery
    fails Apple’s diagnostic test
    iPhone 6
    $299
    iPhone 5s, iPhone 5c, iPhone 5
    $269
    iPhone 4s
    $199
    iPhone 4, iPhone 3GS, iPhone 3G,
    Original iPhone
    $149
    Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
    Out-of-warranty pricing varies for Apple accessories such as adapters and Apple iPhone cases. Contact your carrier, Apple, or an Apple Authorized Service Provider for more information.
    Warranty after service
    Apple covers defects if they arise from authorized service for 90 days or the remaining term of your iPhone warranty, whichever is longer.

  • I've bought my 1st Mac, since than I've replaced my old disk to a new one - and at the lab they created my new admin's name as admin.. I've changed it after 'root'ing - and now I can't find my photos either at iPhoto/photo booth,what can I do to restore ?

    I've bought my 1st Mac, since than I've replaced my old disk to a new one - and at the lab they created my new admin's name as admin.. I've changed it after 'root'ing - and now I can't find my photos either at iPhoto/photo booth, what can I do to restore restore them, they are very importent to me !!!
    Please I'll be thankfull.

    I stated that I did try to do all of this when I first set up the new computer...I did do the Setup Assistant numerous times but my old computer kept freezing half way through.  Even if I did it when I first got the new computer back in Septemeber, I would have had the same issue b/c my old computer has been 'broken' for a while.  My old computer can't handle doing too much at once and I think the setup and then migration functions I tried were too much.  That's why I was hoping I could use the migration function piecemeal.  I wish I could just check off the exact files and folders I want vs. having to choose it at the 'user' level...that's too much for my old computer to have to transfer.

  • Will i be able to listen to music, watch videos and take pictures and sync with itunes without a sim in my locked iphone 5?

    Will i be able to listen to music, watch videos and take pictures and sync with itunes without a sim in my locked iphone 5?

    You will need a SIM to activate it. There is no way around that. The SIM does not have to be active, but it must be from the correct carrier if the phone is carrier locked. Once activated, it can be removed and used like an iPod touch, but if you ever have to restore or update iOS, you will need the SIM to re-activate it.

  • I have the new ipad and inserted  a new tata docomo sim , it shows network but is not able to connect to the internet,,, can any1 plzz help me out

    i have the new ipad and inserted  a new tata docomo sim in it, it shows network but is not able to connect to the internet,,, can any1 plzz help me out

    Let's start with the most obvious? Have you paid for service? If yes, thry THIS.

  • I bought a second hand ipad 4 4g the first user forgot the apple id and password, how can i restore the ipad and create a new id and password for it?

    i bought a second hand ipad 4 4g the first user forgot the apple id and password, how can i restore the ipad and create a new id and password for it?

    You cannot get around Activation Lock without the oringinal owner disassociating the iPad from their account.
    See the Activation Lock FAQ for what you and they need to know.

  • I Have iPad4 and using with Aricel Prepaid 3G SIM, How to check my VAlidity period and balance amount through iPad?. pls help me

    I Have iPad4 and using with Aricel Prepaid 3G SIM, How to check my VAlidity period and balance amount through iPad?. pls help me, M.Kumar, Chennai,
    <Email Edited By Host>

    There are 2 concepts attached to a bank balance. The balance as per your books of accounts and another is the balance maintained with the bank. I believe i need not explain these 2 concepts. These 2 balances can be obtained from Oracle system provided some of prerequsities are met with.
    Balance as per your books - This is nothing but the GL balance available. In order to obtain balances for each bank accounts, it is advised that each bank account should have a separate account code combination. This is achieved generally by having a separate natural account for each bank. The code combination is attached to the cahs account for each bank. By maintaining separate account code combination, the balance in each code combination can be obtained from GL (provided transactions are accounted and posted in GL). These balances represent the balance for each bank according to your books of accounts. You can create an FSG for this purpose and provide the same to the customer, so that they can run the same whenevr they want.
    Balance as per bank - This balance is maintained by oracle in 2 ways - either the bank balance can be manually entered for each bank account for each date (quite cumbersome). Else, while loading the bank statement, the bank balances are also loaded. There are various types of bank balances stored - value dated balance, available balance, float balance etc. Depending on the balances provided by bank along with the bank statement, the bank balance can be recorded in oracle system. After the bank statement is uploaded and balances stored, standard cash management reports are available to query for the bank account balances. In order to view daily movement, the bank statement should be loaded on daily basis.
    Hope this helps.
    Vinit

  • My MacBook Pro is crashing and Mac OS stops working sometimes so I have to restart it. And sometimes it stays on the first white-ish screen with the Apple and won't start further. What to do?

    my MacBook Pro is crashing and Mac OS stops working sometimes so I have to restart it. And sometimes it stays on the first white-ish screen with the Apple and won't start further.
    What to do?
    Does that mean that the is the end of my Mac Book 5bought in the summer of 2009) ? Or is there someting to do to fix it?
    Thanks
    V

    Try this:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • I just started my Macbook air the first time, connected it with my wlan and know it asks me for a password and it does not accept the only password I know, what can I do?

    I just started my Macbook air the first time, connected it with my wlan and know it asks me for a password and it does not accept the only password I know, what can I do?

    It needs the user password for the wireless router, that would have been set by whomever installed the router, if that was you then try to find the password. If you can not find the password reset the router to factory default and set it up again.

  • Hi. if i replace my exicting iphone id with new id, does it effect my contacts, wil it formate all my contacts or not, please tel me

    hi. if i replace my exicting iphone id with new id, does it effect my contacts, wil it formate all my contacts or not, please tel me

    It is my understanding that if you delete the account per the instructions below, you will be able recreate, but you will NOT have access to the prior BBM contacts.
    Read this for full information and suggestions to regain access to your BBID >> http://supportforums.blackberry.com/t5/BlackBerry-World/How-to-regain-access-to-your-BBID/td-p/25467...
    You have to remember either the BlackBerryID password, or the secret question answer. Without either, you're stuck.
    Your choices are:
    --Use another email account to create an entirely new BlackBerryID (with which you will lose access to any purchased apps using the "forgotten" first BlackBerryID, or
    --Find the initial email you were sent to confirm the initial BlackBerryID, and in it is a link to click to cancel and delete the account. Click on that, delete the account and then you can use that same email to create an entirely new account.
    Good luck.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I dropped my phone in the water I know it's not covered with the Warranty so what can I do can I trad it in and get a new one and pay some kind of money or do I have too just buy a whole new phone?

    I dropped my phone in the water I know it's not covered with the Warranty so what can I do can I trad it in and get a new one and pay some kind of money or do I have too just buy a whole new phone?

    The genius bar folks will be glad to help...and if you have backed up your iPhone in iCloud they will restore the backup to the replacement iPhone for you while you wait.
    Call or email for an appointment, you don't want to add to your frustration by standing around waiting for someone to get free to help you.

  • I have iPhone 4S with new ios7, and panorama wallpaper doesn't work ! It let me shoose it, but it's not work, why?

    I have iPhone 4S with new ios7, and panorama wallpaper doesn't work ! It let me shoose it, but it's not work, why?

    These prices are for the U.S.
    Out-of-Warranty Service
    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
    iPhone model          Out-of-Warranty Service
    iPhone 5          $229
    iPhone 4S          $199
    iPhone 4, iPhone 3GS,
    iPhone 3G, Original iPhone          $149
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax.
    When setting up out-of-warranty service, Apple will request credit card pre-authorization for the maximum service fee listed above.  This amount will be deducted from your credit limit. The final service fee we charge will be determined during testing and may be less than the service fee listed above.
    Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.
    Apple reserves the right to determine whether or not your iPhone is eligible for Out-of-Warranty service. iPhones that are repaired or replaced have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare service contract coverage, whichever is longer. Please see Apple's Repair Terms And Conditions for further details.

  • After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

    After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

    The best thing to do would be to start over. Use Setup Assistant this time.
    Boot into Recovery, launch Disk Utility, and erase the startup volume. This operation will destroy all data on the volume. Quit Disk Utility and install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
    When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups. For a walkthrough, see here:
    Using Setup Assistant
    Don't transfer the Guest account, if it was enabled on the old system.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.

Maybe you are looking for

  • Lenovo G560 Not able to turn on wireless connection

    I have had my G560 since early 2010, and the wifi has alwaya worked untill now. Suddenly when I got home, it was switched off for whatever reason and I dont know how to fix it. Before you simply say "press Fn+F5" I have this to say - That is NOT the

  • Contacts not syncing with icloud

    Contacts on my office 2010 not syncing with iCloud

  • Trying to authenticate aginst server deleted from account

    I think I'm in a bit of a catch 22 and desperately need help. When I came home my family was complaining that the 'media' mini connected to the Westell wireless DSL modem and to the TV couldn't connect to the internet. Last night, I fired up <virtual

  • CUP and SPM Integration

    Hi, We are not using the "Auto Provisioning" feature. To provision Superuser access through CUP by the Owner, is it mandatory to trun on the auto-provisioning? Is there any workaround to provision superuser access through CUP with turning on the auto

  • IPhone system settings?

    Hello all - I am new to iPhone development and objective-C. Does anyone know if the latest SDK supports reading of system constants? e.g. Can my app detect if the phone is in airplane mode, wi-fi is enabled, or what the screen brightness is currently