BIOS admin password recovery (aka "system disable")

Hi,
I will be very grateful if someone could help me to reset BIOS admin password on my HP Pavilion tx2500 - I didn't use it for more than one year so the password is obviously forgotten.
After 3 invalid attempts it displays "System disable Key: 72015992"
Thank you!
This question was solved.
View Solution.

Hi
Try: 63973314
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Similar Messages

Enter Admin Password or Power On password. The System Disable number is [ 59568624 ]

3) Enter Admin Password or Power On password. The System Disable number is 59568624

Please enter : 46440200 Steps to be followed:1. Use the unlock code posted above to enter the BIOS2. Disable all passwords that are enabled3. If asked for current password - type the unlock code4. For new password, just press ENTER key5. Repeat the same for verify password column.6. Then leave the BIOS by saving & exit option to save the changes. Troubleshooting:Incase if the Password doesn’t work please try a Hard Reset as follows.1. Shut down the notebook2. Unplug the AC Adapter and then remove the battery3. Hold down the Power button for 30 seconds4. Plug in the Power/AC Adapter (Leave the battery out for the moment) & Start the Notebook5. If you now see a password box, Please type the same password I shared before & press enter Hope this helps, for any further queries reply to the post and feel free to join us again **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,K N R KAlthough I am an HP employee, I am speaking for myself and not for HP

Dell M1330 BIOS Admin Password

Check out the sticky post in this group from Dell; they can't help with that here anymore, you have to contact support.

Need help clearing the BIOS Admin Password. Not Windows password, not BIOS "system" password. This is the BIOS Admin Password. I have already tried removing the CMOS battery to clear and that did not work. I understand there is a way to "break" the password for these systems.
Can you help with a password for this system?
System Number: 6rq08j1-595b
This topic first appeared in the Spiceworks Community

G6 and i forgot my bios admin password [ 67372066 ]

i have HP Pavilion g6 and i forgot my bios admin password because i didnt visit my bios settings for long time. When i try wrong password it gives a number after the third attemp that is [ 67372066 ] . please help how can i reset my password
This question was solved.
View Solution.

Hi,
Enter: 78050068
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Forgotten Bios Admin Password COmpaq CQ-62

Hey guys,
I have unfortunately forgotten my BIOS admin password, I still have my startup password, but for some unknown reason I made the BIOS admin one different. I have now tried too many times and all I get is an error code 58827813.
Can anyone help?

Hi,
Try the below code
47785235
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

How to recover BIOS Admin password on HP ProBook 4740s?

Excuse me, do you know how to recover BIOS Admin password on HP ProBook 4740s?
My support period already over. But I don't no BIOS Admin password on my notebook...
Thank you.
This question was solved.
View Solution.

Hi,
Unfortunately, business machines such as Probooks or Elitebooks have more stringent security than consumer models - they don't produce 'halt codes', the password cannot be derived from the Serial No. and the code is stored in non-volatile memory so removing the RTC cell will not reset the password in this case.
If you Contact HP Business support they should be able to send you a customised SMC.bin file which you can use at boot to reset the password.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Hp envy dv6 model 7226nr bios admin password reset

yes I am OperationDumbo when it comes to cpu's nowadays...I read and learn a little & then become very dangerous...I have a smart cpu friend to help me...he didn't know about my cpu and resetting the bios admin password...he suggested unplugging battery for 20 min and didn't work..I have tried every passw I thought it might be & wrote it down on my cpu paperwork which got lost in a move.....sure would appreciate any ideas you have for resetting it...After I tried what I thought it was 3-4 times I get an error message14284278...I tried that # and it didn't work either...I haven't figured out how to post in this forum yet so I pm'd you...I guess I have an acct to see if you respond... TY kind Sirs!
This question was solved.
View Solution.

Hi,
Enter: 01182878
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Admin password recovery

I recently reinstalled my operating system, Mountain Lion. I had to change my admin password then promptly misplaced it. How do I recover the password please?

Admin Password reset:
1. option + power on recovery
2. choose recovery HD
3. choose English as a Main language
3. when the 4 options come up go to the top left hand menu to: Menu>Utilities>Terminal
5. window will come up 'resetpassword', hit enter
6. Select the user account by clicking on the icon
7. enter the user pw into the account, 2x, and enter a password hint
8. save (do nothing with Reset Home Folder and ACLs)
9. will receive a message 'Login Password Reset…user's default keychain password was not changed…) click ok
10. close all windows by clicking red circle
11. go to Apple icon, choose SHUTDOWN
12. at startup enter password
13. when you receive the message about updating click 'create new keychain'

Bio Admin Password

I'd like to request the bios administrator password. System disabled code is 63919717.
Any help is appreciated.
Thanks!
This question was solved.
View Solution.

Hi,
Enter: 72671339
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Cisco NCS admin password recovery.

Hi All
In Cisco NCS shell I have incorrectly entered the following command in order to chang ethe admin password and saved it
username admin password hash <password> role admin
and hence lost the access to shell (ssh). Is there a way to retrieve or reset the admin password. Tried to log in as single user (as in any ohter Red Hat Distribution) but didn't work. In the worst case scenario I have rebuild the server (VM) from the .ova imange, however the licenses won't work.
Any advise would be greatly appreciated.
Regards

Hello,
The only way to recover the admin password for NCS would be to use the recovery image (iso). The recovery image is not available for download from CCO. Please open a TAC case & they can special publish the image for you.
For the CLI admin password, the recovery method is the same as the physical appliance. Attach the recovery ISO, and reboot the machine. You may have to force the virtual machine to boot from the cd drive. Once it does, you will get the menu that contains the password recovery option.
Hope this helps.
Ram

DS6, Admin password recovery

Managed to misplace our "admin" password for logging into DSCC web interface. Is there a way to recover it?
I searched the forum and someone said that it is a security violation. I understand that. But I also believe that there are legitimate reasons for password recovery. The whole process can be secured so that it is not trivial and requires certain knowledge to ensure proper use, such as physical access to the server etc.
Thanks,

Do you have your password for cn=Directory Manager?
If so, you can bind as Directory Manager, and overwrite (reset) the userPassword attribute for any entry you like.
You can also manually edit dse.ldif to change the password for cn=admin,cn=Administrators,cn=config or cn=Directory Manager:
- Stop your directory server.
- Make a backup copy of your dse.ldif file.
- Edit dse.ldif and change the userPassword attribute on cn=admin,cn=Administrators,cn=config. Or, for cn=Directory Manager, change the nsslapd-rootpw attribute. You can use cleartext for the password temporarily, but remember to change it again later via an LDAP connection, so it will be hashed.
- Restart the server.

Lost bios admin password.

hi im locked out of my laptop. have tried going into bios . but need admin password. after 3 atempts i get code 63540905. please help

Try entering
72428321
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Cisco ISE 1.2 vm cli admin password recovery

I'm having trouble getting this to work. I was under the impression by mounting the ISO (connect at power on) i could perform the password recovery like it states for the hardware appliance. However, if i mount the 1.2.0.899 iso image (connect at power) I don't seen to get any options in my vm console? At most, I have a <enter> at the very beginning that will take me to Grub or ADE boot menu... but I don't see anything about options to change the password?

Make sure you are following the steps in the following link:
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/installation_guide/ise_ig/ise_postins.html#38674
Also, make sure that the VM Guest is set to boot from DVD/CD first before trying the HDD.
Thank you for rating helpful posts!

CAS admin password recovery

I am looking for help doing a password reset for the web admin password for a CAS server, I have the root password and can login into the CLI fine, but I can not access the web interface.

The simplest solution is to rerun 'service perfigo config' from the shell prompt. Take care not to change any settings but the admin password.

DAC Admin password recovery

Hi all,
I forgot the admin password for Dac. Can you please help me in recovering the old password. Or resetting the admin password.
I have the Dac repository credentials.
Thanks in advance

You should just be able to configure a new authentication file (the wame wayou when you initially set up your DAC connection). The dafauilt user/pwd would be Administrator/Administrator and you can change it as needed after you log in. Here are the steps from the DAC guide.
To create a new authentication file, do the following: Click in the Authentication File field of the Configuring... dialog box. In the Authentication File dialog box, select Create authentication file. Navigate to the folder where you want to save the new authentication file, and click OK. In the Create Authentication File dialog box, enter a unique name for the authentication file, and click OK. Enter the Table Owner Name and Password for the database where the repository will reside. In the Configuring... dialog box, click Test Connection to confirm the connection works. Click Apply, and then click Finish. Note: You must distribute this authentication file to all user accounts that need to access this DAC Repository.In the Login... dialog box, do the following: Select the appropriate Connection from the drop-down list. Enter Administrator as the User Name. Enter Administr
if this was helpful, please mark the response as correct.

BIOS admin password recovery (aka "system disable")

Similar Messages

Maybe you are looking for