Bios and memory problem with a P67A-GD80
Hi, I'm experiencing 2 problems with this board and I have not yet install an OS in it
first problem : in the bios if I go in the section Green Power, the system froze, I have to press reset to reboot
second problem : if I install 2 stick of memory in the blue slot, it work fine
if I remove them and place them in the black slot, it work fine
if I place 4 sticks at the same time, the system crash and reboot and make a loop
here the stick I try : Patriot PVV34G1600LLR 4 of them
G Skill F3-12800cl9q-16GBRL 4 of them
I see that new version of BIOS is supose to fix some problem with compatibility of memory, the problem is the way the board shut down when I put 4 stick, it's like the board is overload the led don't act like when you press the resset, they kind dim before the board crash
thanks and sorry for my english , I must add that it's more than 25 years I build computer I build around 3 a week, I have never RMA one motheboard until now.
Quote
the problem is the way the board shut down when I put 4 stick, it's like the board is overload
Quote
do you mean I have to enable XMS ?
Actually, it's not likely a mainboard overload at all, it's probably the CPU IMC having the problem. Enable of X.M.P. is the last thing you want to do. If the RAM has to be set in this manner, it is not programmed to properly default at the platform's designed specifications. BIOS revisions dealing with compatibility are being worked on to make up for this RAM manipulation.
My apology to the OP in advance for the next comments. Some here at the forum have been advised before, that having to set X.M.P. to get the RAM to work properly (having to OC it) is a wrong way to go about it. The platform must first be able to run at stock/auto/default with no issues 'first', then venturing off to more exotic settings later if desired. This 'forcing' of non spec 'rated' RAM & programming is purely product marketing tactics. As mentioned, with four sticks of RAM, the CPU IMC may require an increase of DRAM V. Here is the official specifications from the current Intel data. This data is not really open to debate. For those that have issue with it, take it up with Intel!
Similar Messages
-
Permissions and memory problems with Yosemite HELP!
I have had nothing but problems since I upgraded to Yosemite. My graphics programs crash and run impossibly slow. I have to restart constantly to clear maxed out memory. My internet speed drags to a crawl, and I constantly have to repair permissions to open files THAT I CREATED. I can't open file attachments from Outlook either (I will NOT use Apple Mail - my clients use Outlook, so I have to as well).
I am getting really angry. This is costing me time and money.
Please tell me there is a fix and how to do it.
Thanks.Here's the report from EtreCheck:
Problem description:
Permissions constantly block me from opening my own and other people’s files. Graphics programs are slow and crash. Memory maxes out, requiring frequent restarts.
EtreCheck version: 2.0.11 (98)
Report generated December 3, 2014 at 10:27:51 AM PST
Hardware Information: ℹ️
MacBook Pro (Retina, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro10,1
1 2.3 GHz Intel Core i7 CPU: 4-core
8 GB RAM Not upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
NVIDIA GeForce GT 650M - VRAM: 1024 MB
Color LCD spdisplays_2880x1800Retina
Thunderbolt Display 2560 x 1440
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 1:1:26
Disk Information: ℹ️
APPLE SSD SM256E disk0 : (251 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Koolaid Drinker (disk2) / [Startup]: 249.80 GB (149.18 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 250.14 GB Online
ST3000DM001-1CH166 disk1 : (3 TB)
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 210 MB
Time Machine Backups (disk1s2) /Volumes/Time Machine Backups : 3.00 TB (2.00 TB free)
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
FANTOM WD10EAVS-00D7B1 1 TB
S.M.A.R.T. Status: Verified
FANTOM (disk3s1) /Volumes/FANTOM : 1.00 TB (703.10 GB free)
Hewlett-Packard hp color LaserJet 3550
Apple Inc. FaceTime HD Camera (Display)
Apple Inc. Apple Thunderbolt Display
Apple Inc. Display Audio
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
LaCie d2
Apple Inc. Thunderbolt Display
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Roxio Toast 6 Titanium/Toast 6 Titanium.app
[not loaded] com.roxio.TDIXController (1.3) Support
/System/Library/Extensions
[not loaded] com.cisco.nke.ipsec (2.0.1) Support
Startup Items: ℹ️
CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.adobe.AdobeCreativeCloud.plist Support
[loaded] com.adobe.CS4ServiceManager.plist Support
[running] com.extensis.FMCore.plist Support
[loaded] com.google.keystone.agent.plist Support
[invalid?] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[loaded] com.adobe.versioncueCS3.plist Support
[loaded] com.adobe.versioncueCS4.plist Support
[loaded] com.bombich.ccc.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[invalid?] com.oracle.java.Helper-Tool.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[invalid?] com.citrixonline.GoToMeeting.G2MUpdate.plist Support
User Login Items: ℹ️
Microsoft AU Daemon Application (/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app)
AdobeResourceSynchronizer UNKNOWN (missing value)
smcFanControl Application (/Users/[redacted]/Desktop/smcFanControl.app)
MagicMenu Application (/Applications/StuffIt 12/MagicMenu.app)
HP Scanjet Manager UNKNOWN (missing value)
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Microsoft Database Daemon Application (/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app)
Dropbox Application (/Applications/Dropbox.app)
Director Docker UNKNOWN (missing value)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
Google Earth Web Plug-in: Version: 6.2 Support
Default Browser: Version: 600 - SDK 10.10
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 Support
Flip4Mac WMV Plugin: Version: 2.3.4.1 Support
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
Silverlight: Version: 5.1.20513.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
CANONiMAGEGATEWAYDL: Version: 2.1.0.1 Support
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
CANONiMAGEGATEWAYLI: Version: 2.1.0.1 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User Internet Plug-ins: ℹ️
fbplugin_1_0_3: Version: (null) Support
WebEx: Version: 1.0 Support
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
WBETools14: Version: 1.0 Support
SlingPlayer: Version: (null) Support
Aspera Web 3.5.1.92531: Version: (null) - SDK 10.9 Support
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS3 Support
Adobe Version Cue CS4 Support
Déjà Vu Support
Flash Player Support
Flip4Mac WMV Support
Growl Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Koolaid Drinker: Disk size: 249.80 GB Disk used: 100.62 GB
Destinations:
Time Machine Backups [Local]
Total size: 3.00 TB
Total number of backups: 293
Oldest backup: 2009-05-27 22:18:30 +0000
Last backup: 2014-12-03 03:55:04 +0000
Size of backup disk: Excellent
Backup size 3.00 TB > (Disk size 249.80 GB X 3)
Top Processes by CPU: ℹ️
6% plugin-container
5% WindowServer
3% firefox
0% fontd
0% smcFanControl
Top Processes by Memory: ℹ️
790 MB firefox
318 MB Finder
318 MB plugin-container
198 MB WindowServer
180 MB softwareupdated
Virtual Memory Information: ℹ️
606 MB Free RAM
3.75 GB Active RAM
2.35 GB Inactive RAM
1.85 GB Wired RAM
3.46 GB Page-ins
127 KB Page-outs -
MOVED: Sandy Bridge Bios and memory problems
This topic has been moved to Overclockers & Undervolting & Modding Corner.
https://forum-en.msi.com/index.php?topic=149330.0Quote
the problem is the way the board shut down when I put 4 stick, it's like the board is overload
Quote
do you mean I have to enable XMS ?
Actually, it's not likely a mainboard overload at all, it's probably the CPU IMC having the problem. Enable of X.M.P. is the last thing you want to do. If the RAM has to be set in this manner, it is not programmed to properly default at the platform's designed specifications. BIOS revisions dealing with compatibility are being worked on to make up for this RAM manipulation.
My apology to the OP in advance for the next comments. Some here at the forum have been advised before, that having to set X.M.P. to get the RAM to work properly (having to OC it) is a wrong way to go about it. The platform must first be able to run at stock/auto/default with no issues 'first', then venturing off to more exotic settings later if desired. This 'forcing' of non spec 'rated' RAM & programming is purely product marketing tactics. As mentioned, with four sticks of RAM, the CPU IMC may require an increase of DRAM V. Here is the official specifications from the current Intel data. This data is not really open to debate. For those that have issue with it, take it up with Intel! -
Memory Problem With 4gb Crucial Ballistix and Asus M4A785TD-V EVO
motherBoard: ASUS M4A785TD-V EVO
bios Version :2005
Video: amd hd5750
Processor: AMD PHENON II X2 550 3.100MHZ
Memory: Crucial
Modele Memory: blt4g3d1608dt1tx0
Capacity: 4GB
greetings to all
i have asus m4a785td-v evo mobo. i ve bought 4 gb crucial ballistix ram today. it says on product its 1600 mhz and cl8 but it shows on my pc 1333 mhz and cl9. when i was searching for this problem i came across this topic: http://forum.crucial.com/t5/Crucial-Ballistix-gaming-memory/Memory-Probleme-With-8GO-Crucial-Ballistix-and-Asus-M4A785TD-V/td-p/9464 can i apply the same settings? how can i fix that? is it possible via bios settings? thx in advance and sry for my bad english. here is some screenshots:I am not good at RAM setting but the 'Timings Table' shows there is XMP-1600 profile available so I believe it would be enough to turn on that memory profile in BIOS.
-
For everyone having memory problems with this board
I have been working on my memory problems with this board. Memtest failed every pass yet memory was fine and board was fine. Was using Kingstone Value Ram
Set bios version back to 1.7
set preformance to fast
set memory to
2.5
4
4
8
Set voltage to 2.7 if that does not work go to 2.75
now working great no more blue screens or os getting corupt it seems to run like a charm
Thanks to the people who have posted sefull iformation even know you have to dig deep to find it.i was having mem problems with this board. But i set up bios v2.2 - ram voltage 2.75 - performance mode: slow and ram timing by SPD.
Seems to work great for me but my video card is messed up so my comp dies every ones in a while. -
Memory problems with PreparedStatements
Driver: 9.0.1 JDBC Thin
I am having memory problems using "PreparedStatement" via jdbc.
After profiling our application, we found that a large number oracle.jdbc.ttc7.TTCItem objects were being created, but not released, even though we were "closing" the ResultSets of a prepared statements.
Tracing through the application, it appears that most of these TTCItem objects are created when the statement is executed (not when prepared), therefore I would have assumed that they would be released when the ResultSet is close, but this does not seem to be the case.
We tend to have a large number of PreparedStatement objects in use (over 100, most with closed ResultSets) and find that our application is using huge amounts of memory when compared to using the same code, but closing the PreparedStatement at the same time as closing the ResultSet.
Has anyone else found similar problems? If so, does anyone have a work-around or know if this is something that Oracle is looking at fixing?
Thanks
Bruce CrosgroveFrom your mail, it is not very clear:
a) whether your session is an HTTPSession or an application defined
session.
b) What is meant by saying: JSP/Servlet is growing.
However, some pointers:
a) Are there any timeouts associated with session.
b) Try to profile your code to see what is causing the memory leak.
c) Are there references to stale data in your application code.
Marilla Bax wrote:
hi,
we have some memory - problems with the WebLogic Application Server
4.5.1 on Sun Solaris
In our Customer Projects we are working with EJB's. for each customer
transaction we create a session to the weblogic application server.
now there are some urgent problems with the java process on the server.
for each session there were allocated 200 - 500 kb memory, within a day
the JSP process on our server is growing for each session and don't
reallocate the reserved memory for the old session. as a work around we
now restart the server every night.
How can we solve this problem ?? Is it a problem with the operating
system or the application server or the EJB's ?? Do you have problems
like this before ?
greetings from germany, -
Memory problem with jdk/jre 1.1.8
My name is BERGMANN Yannick.
I'm working for IRM in Li?ge and we developped an application (user interface for an industrial measurement system) in Java (JDK/JRE version : 1.1.8).
We have a big memory problem with this application :
- This user interface is running on a WINDOWS NT PC with 128MB.
- This is the command to lanch our application :
C:\Program Files\JavaSoft\JRE\1.1\bin\jrew.exe" -ms32m -mx32m -cp "\Program Files\HMI\HMI.zip;\Velocis\Add_On\Jdbc\raima.jar;\Program Files\Swing-1.1.1\swingall.jar" be.irm.hmi.kernel.HMI -t15 -d"Velocis rdstcp" -newdb -mf1m -mr20
- When our application is running, everything seems to be OK in memory for it. The garbage collector seems to work properly and our application has always at least 5MB free memory (We use the java instruction "Runtime.getRuntime().freeMemory()" to know this).
- But when we look in the "Windows NT task manager" for the "jrew" application, the memory increases ALWAYS.
- After 5 days our application is completely frozen and blocked ...???
- here is a memory map of our Windows NT PC :
"jre.exe" "commit total" "commit limit" "commit peak" "physical total" "physical available" "physical file cache"
Monday 92264 109256 194944 109424 130484 19492 6216
Thuesday 106196 123072 194944 123348 130484 6072 5840
Wednesday 110836 132288 194944 132416 130484 4408 5140
Thursday 108200 144980 194944 145140 130484 4888 5148
Friday 109440 158319 194944 161334 130484 4911 4992
Monday 111600 209060 228548 209148 130484 5184 3484
Have you any idea of what is happening with "jrew" in memory ?
We have had this problem for six month and we are totaly out of idea.
If you can give us any idea, we'll appreciate a lot.
Thanks in advance,
BERGMANN Yannick
IRM SA - Software Engineer
Tel. (32)4/239.90.10
Tel. (32)4/239.90.74 (direct)
Fax (32)4/263.40.97
E-mail [email protected]We had a memory problem with a swing applet in our company. The major reason for this was that we added new components in a JTree and removed them later again, and the components we removed were never garbage collected. This was because with these components we added different listeners, and we didn't remove the listeners after we didn't need the components anymore. After we corrected this, the components where garbage collected.
Perhaps it's a similar problem you have, or I have no idea. Check that you remove actionlisteners, mouselisteners etc from components you want to be garbage collected.
You could also test your application with OptimizeIt to see what objects you create and how many you get of them over time: http://www.vmgear.com -
Memory problem with 5330 XpressMusic
Hi,
I seem to have a memory problem with my 5330, I have a 1Gb micro disc installed. My son sent me a photo from his phone, when it arrived I got a warning on the scren that 'there is not enough memory to receive messages', I have tried to delete as much as I can, a lot tells me I can't delete it, but I still get the same warning. This warnig shows up each time I switch on the phone. How can I get myself more space? Can I move things from the phone memory to the memory card?
Gerald
Message Edited by warmbells on 01-Nov-2009 06:19 PMAre you sure you're using a 5330 XpressMusic? Or is it a 5320 XpressMusic? The former is yet to be released, AFAIK.
Assuming that you are using a 5320, try these steps:
-> Move all photos, music, videos stored in the phone memory to the memory card. You can use the built-in File Manager to accomplish this.
-> Delete all files that you would've received via bluetooth, present in your Inbox. You can save them to the mass storage.
-> Clear the browser cache.
-> Clear the Sent Items folder.
-> Make sure you don't have too many messages in your inbox.
Hope this helps
Cheers,
DeepestBlue
5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You... -
Hello friends,
we are having memory problem with integrated ITS.. on one application server all memory of ITS is getting exhausted. We think few users take lots of memory and it never gets released.
I checked Note 742048 - Integrated ITS, memory requirement in application server but parameters looks ok. Sometime, when i kill a user session in SM04, some part of memory was released. However i am not able to find which sessions are taking max memory as i do not see any workproess active in SM50.
in SITSPMON :
Memory Consumption: Overview
Sessions: 27 24,710,431 Bytes 915,201 Bytes/Session 2,433,8
Templates: 14,793,306 Bytes
Sess. & Templ. 39,503,737 Bytes Currently available to ITS: 81.92MB o
ITS Session memory type Peak Memory Total Current
USER 001 2463 Session Memory 1,955,757 938,597 7,574 723
USER 001 2503 Session Memory 2,008,621 965,245 9,181 930
USER 001 2523 Session Memory 2,412,477 856,925 11,327 82
thanks
ashishand what is 2463 is line : USER(user ID) 001(Client) 2463(??) Session Memory 1,955,757 938,597 7,574 723 as this is not a work process ID.]
Basically i am trying to correlate ITS session with SM04 Session of user. -
Memory problem with my Nokia 3220
Hi,I am new here and I have a memory problem with my Nokia 3220.I deleted all of my stuff in galery exept the BlueSquare theme and Nokia Tune but it says that i only have 483kb free memory and galery has 1,7mb memory taken. What should i do ?...I hope you understood my problem and i hope you can help me!
Shibuy
Thank You!!I have the same problem recently. I bought my nokia 3220, 3 years ago and all was ok but now I download some free themes from a web site and suddenly I realized that my cellphone has less memory. In the phone options says that I have 2,2 MB in my Gallery when actually I have only 800 KB in my Gallery. I don't know what happen!! Maybe it's a virus or what is the solution?? Can I restart the cellphone ?
-
JPA @Lob annotation and memory problem
Hi.
Is there any way to overcome the memory problem with @Lob types?
FetchType.LAZY means lazy as it spelled. Am I right?
And it doesn't mean any stream handling of big sized lobs. For lobs are so big that my physical memory can't hold it.
@Entity public class Parent implements Serializable {
@Lob private byte[] big; // what can I do if it is to big to hold in memory?
}Is there any standard way for this problem?
I found that openejb serves *@Persistent* annotation for InputStream/Reader for this purpose.
But I want to know if there is another way for more portability.
You know what?
I heard from a JPA spec guy that this problem (maybe it's not a problem) won't even be considered in next version. (2.0?)
How horrible...
Is it can be a good think that split the Lob column into a OneToMany children?
This is the best output, for now, from my head.
@Entity public class Parent implements Serializable {
@OneToMany private Collection<Child> children;
@Entity public class Child implements Serializable {
@Lob private byte[] chopped; // small enough to fit into memory
}If the Lob is too big for your memory, then you are best off handling whatever processing you need to do on it through raw JDBC. If your only interested on the first n bytes, then you could probably map to something like this using a view the truncate the lob, and map your class to the view instead of the table.
You should also be able to define your variable as Blob or Clob and get the locator directly. But the locator is tied to the connection, so will not be usable after the connection is returned to the pool. I'm not sure how such a lob could be model if it can't be read into memory, perhaps as some special JPA Lob type that can return a stream on the data by re-querying the lob from the db.
What exactly to you want to do with the lob?
-- James : http://www.eclipselink.org -
Mail and iPhoto Problems with sending photos.
Mail and iPhoto Problems with sending photos.
I have this problem that started a while ago and seems to be getting worse.
Here are the different scenarios.
-If I try to share a photo to email within iPhoto, it will insert the image file name in the mail message, but no image icon or opened image. In iPhoto Preferences under General I have chosen to use Email Photos using Mail.
-If I choose to use iPhoto to send the photo, it will compose the message and the photo is viewable. If I send the message i can view the photo within the email I sent to myself. Nothing happens when I double click on the photo in the Mail message. Nothing happens when i control click on the photo in the mail message. Nothing happens when I try to drag the photo to the desktop from the mail message. When I try to save attachments from the email and choose a place to save it, the save button is grayed out and it cannot be saved. When I check the mail message it says there is an attachemnt but there is no file size listed.
-If I use the stationary within Mail app I cannot drag a photo into the placeholder, I get a circle with a line through it symbol when I try. It happens if I try to drag a photo from the desktop or from the media browser within Mail app.
-If I drag the photo to the desktop from iPhoto, I can double click it on the desktop and it will open in Preview.
-If I then control click on the same photo on the desktop and scroll to share/email, the generic photo icon will be inserted in the mail message. If i double click the photo icon in the mail message I get a message it can't be opened because it is empty.
-If I drag that same image to the mail message body the same thing happens.
-If I send that email to someone they cannot open the image file.
What I can do:
- I can drag that same image file on the desktop to my dropbox folder and it will upload. From there I can go on my iPad and download the photo and send it through email just fine.
-I can open the same image file on my desktop in Preview, I can copy and paste it into a mail message and the image will be viewable in the mail message by me and by the recipient.
-I can drag that same image on the desktop to my safari browser window and it will be viewable in the page. i can then copy and paste that image into a mail message and it is viewable in the message. I can then send that email message to myself and i can control click on the image and get all my options. It also shows as an attachment with the size of the image file in the mail message.
I can send that message to someone and they can see the photo and open it fine.
-If I send that same email to me I can see the photo within the mail. If I then drag that photo to the desktop I cannot use it again to put in an email as the same problem happens again.
I have tried all scenarios in my user account, another users account and in a guest account. The same happens in all. I am guessing because of this it is not a corrupt preference file, unless all of the preference files are corrupt. The guest user account I added a new email account so it was brand new and still had the problem.
I am stumped, all and any help is appreciated.Another problem that may be related….
I have Snapz Pro. I used to be able to save the snaps to my desktop or a folder. Now when I take a screenshot and try to save the file to my desktop or a folder on my desktop I get this message "Files cannot be created in the selected location. You do not have permission to write to the selected location. Please choose a different location." I have found that i can only save the file to the clipboard. I have repaired permissions many times and still I have this problem. -
I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1. Why am I having this problem?
You can check you Adobe account online to see if the serial number is registered under your account. If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
I have Iphoon 4 and ihave problem with speaker what i have to do?
I have Iphoon 4 and ihave problem with speaker what i have to do?My problem is no body can heir me.
I have got my IPhoon from London U.K. Now i'm in Saudia ArabiaIf it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
If it's happening on all apps then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I have ipad 2 and facing problem with programs swtching off
I have ipad 2 and facing problem with programs it's swtching off while working and turn to home page. Am using ios 5
If it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
If it's happening on all apps then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Maybe you are looking for
-
How to find detail of when/who created particular entry in Z tabel
Hi folks I have a Z table, and which contain one entry with incorrect data . Is there any way to find out , that when and who inserted that resord in Z table Regards PG
-
Hi Friends, I had a requirement. I had some data in Internal table. Ex: MaterialNo | Description | Quantity | Uom | MRP Controller | Name 123456 | XYZ | 20 | KG | 25 | Kumar 123457 | XYB
-
Cs 5 upgrade, no qualifying product found problem. solved!
hey guys. I posted earlier with the cs5 photoshop upgrade not recognizing my cs 4 serial #. wanted to give an update. Turns out the cs5 installer wasn't recognizing my installed copy of cs4 extended as a qualifying product. so after a nice chat w
-
Get Forms Error FRM-92050 Please Help
I just success install EBS 11.5.10.2 but when I link from my pc client it's show error FRM-92050 cannot connect to form server <myhost:9000> how to resolve this problem also i wondering is Linux can be EBS Client? because I try to use my note book wi
-
Visual Composer deployment error?
Hi Gurus, When am trying to deploy bespoke VC models am getting the Error in compiling Flex application (1).error I have set the VC.VerboseErrorMessages field to True ..... what will be the root cause of this problem. Kindly let me know ASAP Higher