BIOS APPLICATION ERROR (501)

when i give power on system shows error hp bios application selected is corrupt or missing please again BIOS Application error(501)

Hello Jaime13,
Have you tried the steps from the previous post?
Try those first and see what happens.
Let me know how everything goes.

Similar Messages

BIOS application error 501

Imaged an EliteBook 8440w with Windows 7 x64 Enterprise. When shutting down from the Start button in Windows, the system shuts down, then goes into a reboot. It then comes up with the "HP BIOS Application Error (501)." I have seen posts about the EFI partition, etc etc but nothing on how to fix the problem from re-occurring. Thanks.

Hi Entering the BIOS Setup menu
Entering the BIOS Setup menu requires pressing a specific key at a specific time. If you fail to enter the Setup menu on your first try, repeat the following steps until you are successful:
Close all applications that are currently running and restart the computer by clicking Start , Shut Down , Restart the Computer , and then OK .
When the red Compaq logo or blue HP logo screen appears, press the F10 key on the keyboard to enter the Setup menu.Reloading the default settings
Complete the following steps to reload the factory installed BIOS Setup settings:
In the BIOS Setup utility, select the Exit tab.
Select Load Setup Defaults .
Select Save Changes and Exit (pressing F5 and the Enter key will also load the Setup Defaults).
Press Esc and then Enter to exit Setup. This is a feature.
You are using info-button to start and have no efi-partition (HP_Tools) installed.
Disable 'HP Quicklook' from bios setup.
HP EliteBook Notebook PC Series - BIOS Application Error (501)
Information
You may have get a 'BIOS Application Error 501' error message if using not HP Preload image and press INFO button when starting unit.
The HP BIOS application selected is corrupt or missing. Please install the application and try again.
BIOS Application Error (501)
Enter - Continue
Details
This error is the result of using the INFO button launch HP EFI Application and if not using HP Preload image, the operating system cannot find the EFI partition.
What is EFI ?
EFI is a set modular interfaces that replaced the set of traditional BIOS interfaces between the OS and platform firmware.
The EFI partition is viewable on HP Preload image and HDD and is labeled as HP_TOOLS.
The EFI partition and HP EFI application are not required for the basic operation of HP Notebook, however, if partition is missing, EFI feature is not available.
Read mode on EFI Features on the "HP Business Notebook Computer - EFI Guidelines" that are downloadable on the www.hp.com
EFI Guidelines (116.5KB, PDF) HP Business Notebook Computer
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01564727/c01564727.pdf?jumpid=reg_R1002_USE... Let us know how it goes! *Although I am an HP employee, I am speaking for myself and not for HP.*Did my response help with your issue? If so, please give me Kudos by clicking the "Kudos" button. Thanks!

How to fix error 501 in hp pavilian g4

how to fix error 501 in hp pavilian g4

Hi @Ajay81
Welcome to the HP Community! I will be happy to help you with the 501 error you are getting but I need more information then what you posted. For your future posts I would suggest that you check out Want Good Answers? Ask Good Questions.
Is this a BIOS 501 error? What is the exact error message? Word for word would be great. What operating system are you using? What is the product number for your notebook?
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Boot Error 501 QuickWeb

My QuickWeb won't work.When ever I open by pressing the dedicated key it says Boot Error 501 BIOS Corrupt/Missing.
How to fix that error.
I have a Recovery Hard Drive (D and HP_Tools (E with one backup in with which was before I had deleted the previous User Account and all files associated with it. Which shall I use?
And if I use E will all my previous files come back? I do not want that .
Also, I have heard that pressing Windows+B and then powering it up does the trick.Will that work? What will be used ? D or E?
All , my previous files will be restored? I don't want that.
Please help.

Refer:
http://support.hp.com/us-en/document/c03738933
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

QuickWeb Error 501

My QuickWeb won't work.When ever I open by pressing the dedicated key it says Boot Error 501 BIOS Corrupt/Missing.
How to fix that error.
I have a Recovery Hard Drive (D: and HP_Tools (E: with one backup in with which was before I had deleted the previous User Account and all files associated with it. Which shall I use?
And if I use E will all my previous files come back? I do not want that .
Also, I have heard that pressing Windows+B and then powering it up does the trick.Will that work? What will be used ? D or E?
All , my previous files will be restored? I don't want that.
Please help.

Is this a HP software? And what computer O/S is this on and is the laptop or desktop?
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

My iCloud is not syncing between my mac and my iPhone and shows the following error message CoreDAVHTTPStatusErrorDomain error 501. what does this mean?!

I have recently upgraded to an iphone 5S 4G and also updated my mac with the latest software so that i can use the icloud to back up all my stuff. It doesn't seem to be working with my contacts at all and recently added ones are disappearing, old ones are duplicating etc. The contacts icloud has the following error message CoreDAVHTTPStatusErrorDomain error 501. and I have no idea what it means. Can anyone help?

I had this problem before. I like to disable extra services to speed up my computer and I disabled the Apple Mobile Device service and had to re-enable this.
You can do that by going Control Panel>Administrative Tools>Services. Once you have gone to the services window, look for Apple Mobile Device and right-click. Select "Properties". There should be some information about the service as well as the label "Startup Type" with a drop-down menu beside it. If it says "disabled", that is your problem; Change the selection to anything except disabled (Automatic is easier and ensures that you can sync as soon as itunes opens).
If this doesn't work, I would look into your anti-virus' settings. Good Luck!

Error 501; iTunes store shows no images-only underlined links/question mark

When I open iTunes store, the images show only as boxes with question marks and the text shows as an underlined blue link. When I click on anything I get a Error 501 message. My iTunes library and connection with iPod are unaffected.
I have tried to uninstall iTunes and Quicktime. I have tried uninstalling everything related to Apple/iTunes (including Bonjour) and reinstalling Quicktime by itself (was successful). Everytime I reinstall iTunes, the store appears the same way and is inaccessible. Please help!!

I have the same problem with our system. I contacted the Apple Help Department and they tried to help me via email (same fixes, uninstall, reinstall - same problem), but the problem persists. I can't preview the songs either and would like Apple to step up and help us all out!

HTTP Error 501 with SOAP Sender channel

Hello,
i've am simple Question:
I want to call the following SAP XI SOAP Sender channel "MySoapSenderChannel":
XI-Parameters:
namespace: <myInterfaceNamespace>
Interface: <myAsynchInterface>
QoS: Exactly Once in Order
Queue: MY_QUEUE
We do not care about the Response - so the processing is asynchron.
Thus my interface mapping maps to asynch interfaces. The desitnation
is an ABAP Proxy. The configuration has been done and tested.
Here my question:
according the documentation, the URL has the following syntax:
http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel.
In our case:
http://<myHost>:8002/XISOAPAdapter/MessageServlet?channel=:MyService:MySoapSenderChannel.
But when i generate a WSDL for the interface out of the Configuration, the address is:
<soap:address location="http://<myHost>:8002/sap/xi/engine?type=entry&version=3.0&Sender.Service=MyService&Interface=...
and so forth.
But was is the difference between these 2 possibilities?
Why do i get HTTP Error 501 when i use the URL from the documentation (the first one)?
Thanx in advance
Gunnar

Gunnar,
I will suggest you to go through it once to check all your connection.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Regards,
Sarvesh

Windows Mail server error 501

Every time I foreword an address or web page etc. using the "File" E-Mail Link the following happens. The e-mail is sent but there are five old error messages shown below. The e-mail goes trough but I have to hit the [close] box to clear the sent message. I can't figure out how to remove the old rejected e-mail addresses.
Here is a copy of the message.
The message could not be sent. The authentication setting might not be correct for your outgoing e-mail [SMTP] server. For help solving this problem, go to Help, search for "Troubleshoot Windows Mail", and read the "I'm having problems sending e-mail" section. If you need help determining the proper server settings, please contact your e-mail service provider.
The rejected e-mail address was '*****@picturetrail.comAccount:2051017:return'. Subject 'Account:2051017:return', Account: 'Dave's Mail', Server: 'smtp.att.yahoo.com', Protocol: SMTP, Server Response: '501 Syntax error in arguments', Port: 465, Secure(SSL): Yes, Server Error: 501, Error Number: 0x800CCC79

This has nothing to do with Firefox. Mail is being rejected as you have set up your mail in a wrong way with incorrect ports etc.. Please contact the appropriate people for this issue and not here.

ORA-29279: SMTP permanent error: 501 5.5.2

im getting the error
ORA-29279: SMTP permanent error: 501 5.5.2 Syntax error in parameters scanning "FROM"
kindly help . What is the problem exactly?

I'm having this same issue now.
This doesn't happen to my other databases on another server.
Basically, I have a startup trigger that sends out mail, and I'm finding on database on a particular (new) server, UTL_SMTP is getting this error.
Have you figured out your root cause?

W500 not starting - HELP - unable to locate BIOS ROM; Fatal error during GPU init

hi gurus,
Following problem:
when i start W500 (ubuntu) it stays with the black screen, not even displaying initial ThinkPad message, where you might press the ThinkVantage blue button, to go to BIOS. It just stays black and does nothing.
Than I press Power button for a few seconds to shut it down and try again. Still black screen.
The same procedure again and again and sometimes W500 boots up, sometimes wants to go to recovery mode, sometimes not.
Sometimes, after the black screen it displays the message:
Invalid ROM contents
ERROR Unable to locate BIOS ROM
Fatal error during GPU init
Anyone had the same problems?
What are the possible checks i might execute, to check up W500?
cheers
lenowiow

Update: I have now tried compiling vbios.bin and int10.bin directly into the kernel. No success.

Why am I suddenly receiving the message: 5.1.0 - Unknown address error 501-"5.1.8 Bad sender's system address" I am only getting it for Mozilla Thunderbird

In the past three days, whenever I send a message, it does not go through. Instead, I get the message: 5.1.0 - Unknown address error 501- "5.1.8 Bad sender's system address". I tried downloading the newest version of Thunderbird but it did not work. I do not receive this message when using other software.

I had the look that you suggested. As far as I can tell there are no problems with the user name. Maybe I should check with my email company, Cogeco?

OAM 11gR2 - Remote Registration Exception - HTTP Error 501

Hello
I installed OAM 11gR2 and am trying to configure OAM with WebGate.
While doing remote registration using rreg.bat I get an exception
RemoteRegistrationException
HTTP error 501 could not send HTTP Post message
Can anyone help me?
Thanks,
Ram

Its most likely a problem with your java version.
I know for sure that Java version 1.6.0_37 doesn't work and that 1.6.0.41 works for sure.
Can you try installing a different version of java.
if on linux use the
update-alternatives --config java
as root to point to the java (other version that you installed) and try again.
Let me know if that helps.
Cheers
-Kungo

Error 501 when loading iTunes Store in iTunes AUTOFIXED

When i click the iTunes Store button in the right corner it says that there was an error when loading iTunes Store, and mention into brackets that it's the Error 501.i'm using a macbook pro 13.3 i7 with mountain lion.
Thanks.
AUTOFIXED
i just close the iTunes app and open it again. Then the iTunes Store will work.

When i click the iTunes Store button in the right corner it says that there was an error when loading iTunes Store, and mention into brackets that it's the Error 501.i'm using a macbook pro 13.3 i7 with mountain lion.
Thanks.
AUTOFIXED
i just close the iTunes app and open it again. Then the iTunes Store will work.

"HTTP error: 501 Not Implemented" error while uploading emp photo

Hi,
While uploading employee photo
getting error "HTTP error: 501 Not Implemented"
this error i am getting while linking employee photo to SAP.
pls suggest me how to solve.
thanx in advance

Hi,
don't worry about the "HTTP error:501 Not Implemented The adminContRep command is an internal SAP R/3 command and not accepted by this content repository" error message, it only means that if you chosen the CSadmin button (or transaction) that this only developed from SAP content server and cannot be used for other 3rd party ones, like OpenText.
BR,
Janos

BIOS APPLICATIO​N ERROR (501)

Similar Messages

Maybe you are looking for

BIOS APPLICATION ERROR (501)