Bios Disk Creation & Hard Drive Question A22p

I am trying to create a disk to flash the bios on a A22p thinkpad.  I have followed the directions on the download page but can't get beyond the DOS screen that contains the license info so nothing ever gets copied to my floppy (dispite using a command line per the instructions).  I am very frustrated - any help on how to make a disk would be appreciated!!
Second question, I am trying to upgrade the hard drive to 160gb.  Since the install of the OS stalls I am assuming it has something to do with the drive size, hence my reason for updating the bios.  Does anyone know what the max size is that can be installed in an A22p? 

Welcome to the forum!
There is an option of non-diskette BIOS upgrade, and that's the route I normally take. Save it to your desktop in Windows and run it from there.
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-4Q2KM3
I don't have a positive answer regarding the HDD size, but will tell you that I've had a 100Gb drive in an A22p. Some older machines have a BIOS limit at somewhere around 137Gb if I'm not mistaken. Whether A22p falls into this group or not, I'm not 100% sure. Even if it does, I believe that it would simply fail to realize the "excess" size, so I believe that your issue may be someplace else.
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

  • K8T Master 2 FAR; Hard Drive Questions About

    Greetings!
    I just got off the Google bus and stubbed my toe on your doorstep.  What luck!
    I have many questions, and it's getting harder to find answers for a mainboard that's not being sold "new" anymore.  I did see some other topics that go along lines similar to my own, but I figured it would be a good idea to open a new thread with my specific questions.
    I have decided to split my questions into three parts.  This is part one, "hard drive" questions.
    HARD DRIVE RELATED:
    Western Digital recently announced a new high-capacity SATA Raptor drive, with 150 GB of storage: 
    1)  Can I mount two of them into my K8T Master 2 FAR system and "hardware stripe" them for Windows/XP?
    ....1A)  If yes, is there a minimum recommended BIOS that I should be running?
    ....1B)  If no, then would it be feasibile to "software stripe" them in Windows/XP Pro?
    If I decide to proceed, I will be well-prepared to accept the risk of data loss that would occur if one drive were to crash.
    I currently run my system with a removable SATA drive caddy for my system drive.  This makes it easy to swap OS's by swapping hard drives without opening my CPU case.  If I go with a dual-striped SATA drive arrangement and two Raptors, then I'll replace that removable caddy with a unit that can accomodate two SATA drives. 
    ....1C)  Once in a blue moon, I get a BSOD after having swapped SATA drives.  It happens when I first boot Windows/XP after having run Linux.  Hot-swappable claims notwithstanding, I always swap drives while the system is powered down, although I don't typically shut off the hardware switch at the power power supply.  Are there any known issues or reports of other people having similar occurrences? 
    I also run some IDE devices for data and archival purposes.  My system is typically set up as follows:
    CH 0/0 - Data drive
    CH 0/1 - DVD burner
    CH 1/0 - Data drive
    CH 1/1 - Data drive
    Recently, my system stopped "seeing" any hard drives on CH 1 drive 1.  Known good drives won't show up in the BIOS, and auto-detect doesn't "see" a drive in that position.  I have tried more than one drive, and the problem stays on that channel and position.  I swapped cables with a known good cable, and the problem stays on that channel and position.  For the time being, I have disconnected one of the data drives...but I'd really like to resolve this issue if possible.
    ....1D)  Are there any known problems or issues with "disappearing IDE devices" in the K8T Master 2 FAR?
    Thanks in advance!

    Can't say, this is the first time I hear about SATA caddies....
    Maybe a bad contact or so?
    Sata is pretty sensitive to connection problems, or even folded cables for that matter...

  • Hard drive question dead-dying or not

    Today my harddrive seemed to be failing. When I randisk repair from the install disk it would not repair "the underlying task reported failure on exit". After several tries to reboot with installation disk the hard drive was not even found. I finally let disk utility run and found the disk. The only thing I could do was erase. That worked and I reinstalled 10.4.4. Now when I run disk repair it comes back OK. Could there have been a software issue which caused the inability to see the disk? Should I take this thing in (I have Apple Care) but if it shows nothing wrong what can they do??
    Thanks!

    What is the SMART status of the hard disk. It should be verified

  • Acrobat Pro 9 for mac won't launch, reloaded from disk when hard drive needed to be replace. It's in applications folder but there is an X on the Acrobat Reinstall icon. What should I do.

    Acrobat Pro 9 for mac won't launch, reloaded from disk when hard drive needed to be replace. It's in applications folder but there is an X on the Acrobat Reinstall icon. What should I do.

    Hi Janice,
    What version of Mac OS are you using?
    Adobe does not recommend migrating the software from one disk to the other.
    Please run the setup file for Acrobat and reinstall the software. You might want to delete the existing version of Acrobat installed before reinstalling it.
    Regards,
    Rave

  • Mac Mini has crashed - Disk Warrior and External Hard Drive Question.

    I have Mac Mini that has crashed.  I purchased Disk Warrior and was able to boot from the CD.  Disk Warrior allowed me to see my files again but there is no way I can move them back onto my hard drive.  I cannot grab them.  Before I go into specifics....If I purchase an external hard drive and try to hook it up to my Mac Mini, will I be able move these files to this new external hard drive?  Is this a possibility?
    Or will my new external hard drive need to go through a set up phase - which might be impossible since hard drive I'm trying to take the files from is technically dead?
    Sorry - I'm a novice at these things.

    Hello, no apologies needed for being a novice, great you asked!
    YES, depends where you buy the Drive, it may need Formatting first to Mac OS Extended...
    How to format your disks...
    http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
    (To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
    Thanks to Pondini, Formatting,  Partitioning, Verifying,  and  Repairing  Disks...
    http://Pondini.org/OSX/DU.html
    These generally come Mac Ready, & get Firewire if you have a Firewire port, much faster...
    http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
    Then in DiskWarrior, hold Option or alt key when selecting Internal to repair, that will do the best job of Scavenging the directory & provide a whole new Drive icon to copy or clone your info over to the external drive.

  • Using an External Hard Drive Question

    Sorry if this is such a green question but.....
    Can you play back music and movies from an external hard drive through Apple TV or do they have to be physically need to be on the Apple TV HD?
    Also, Is there a way to play what is "steaming" on a MBP to the TV through Apple TV?
    Thanks in advance guys.

    JayMacApple wrote:
    Can you play back music and movies from an external hard drive through Apple TV or do they have to be physically need to be on the Apple TV HD?
    Compatible content from itunes can either be synced to the AppleTV's drive across your network, or if itunes is running you can stream content from iTunes to the AppleTV if it's not on the AppleTV disk.
    The AppleTV cannot connect to external drives, but iTunes itself can handle media on external drives connected to your computer.
    Also, Is there a way to play what is "steaming" on a MBP to the TV through Apple TV?
    If you mean can AppleTV relay a computer's video output (eg a streaming video in a web browser, or whatever is on screen) then the answer is no.
    Thanks in advance guys.

  • MBP Late 2008 Hard Drive Questions

    Hi,
    I have used PC most of my life and have used Mac OS when related to graphics and video, i find both to have their own benefits. I finally bought my first mac, it got delivered yesterday, the macbook pro late 2008, i got it on a good sale which however limited me to get the 320GB 5400rpm model, and i actually was aiming to get 320GB 7200rpm model. Now that i have this laptop, i wanted to install a new 320GB 7200 rpm hard drive since this laptop model allows you to do that yourself without voiding the warranty. In order to do so, i got this and plan to use my current 5400 rpm drive as a USB:
    http://eshop.macsales.com/item/Hitachi/DIY0A57547F8/
    first of all, as someone new to mac, and even though i have been super impressed by the quality of this product, my first disappointment is the fact that apple offers you to easily replace the hard disk in the mbp but does not sell the hard disk at the apple store or on phone, or allow you to bring the laptop in for HD replacement, and expects you to fill this nice beautiful laptop with third party products, (i wanted a hard disk with the an apple sticker on it just like my current one has - i know its a Hitachi... but apple has the thick black apple sticker on it!! ), i was on phone with apple for 30 mins and they eventually couldn't sell it to me after being confused about it, all they could offer me was a replacement laptop with a 10% restocking fee charge (approx $250). i contacted a mac authorized service center and they quoted me "$332" for that hard disk from apple (Hitachi 7k320), its at $95 (and a -$20 rebate) at buy.com - without the apple sticker, same model.
    now that disappointment aside, i am still optimistic with my choice and have the following questions, please correct me if any of my understanding anywhere in this post is incorrect:
    1. when i install my new hard disk, what type of disk formatting should i use? - i want to be able to boot from windows xp x64 professional, i will be using it almost as much as i will use mac osx (for graphics n video), since i want to be able to run some particular PC applications on full speed that i constantly use and also play some PC games (i know many people here may argue that i dont need windows at all, however i assure you i have some good necessity for it ). Will the Mac OS Extended (Journaled) formatting allow me to boot from xp later? any tips related to this area?
    2. There are 2 ways to install my new hard disk.
    Route 1: http://eshop.macsales.com/techcenter/techtips/sparedrive.cfm
    Route 2 (considering since my mbp is new and fresh out of the box 1 day ago): http://eshop.macsales.com/techcenter/index.cfm?page=/manuals/mac/clondata.html
    which one would you recommend?
    3. Once i have the hitachi 7k320 installed, and the 5400rpm that came with the product removed, should i expect any different or limited service/warranty from apple care? if anything ever goes wrong in the mbp (except the hard disk), i can send it to apple with the replaced hard disk in it and it will all be acceptable and OK, right?
    4. Has anyone here installed a Hitachi 7k320 drive in a MBP Late 2008? if yes, were there any sort of noise/vibration issues after installation?
    5. What brand would you prefer for an internal drive for the MBP Late 2008? it originally comes with a Hitachi.

    1. Prep the new drive as follows:
    Extended Hard Drive Preparation
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Set the number of partitions from the drop down menu to one (1.) Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    7. After formatting has completed quit DU and return to the installer. Complete your OS X installation. You can restore other pre-bundled software using the Install Pre-bundled Software installer that is on the OS X Installer Disc One.
    In order to install Windows you will need to use Boot Camp Assistant in the Utilities folder to create the Windows partition on your hard drive and assist with the installation. You can install the 32-bit version of XP w/SP2 or SP3 or Vista 32-bit or 64-bit. Windows drivers are included on your OS X Installer Disc One and should be installed after you boot into Windows.
    If you must use the 64-bit version of XP you cannot use Boot Camp, but you could use VM software such as Parallels or VM Fusion. See the following:
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak 2 or Vista. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
    2. Parallels Desktop for Mac and Windows XP, Vista Business, or Vista Ultimate. Parallels is software virtualization that enables running Windows concurrently with OS X.
    3. VM Fusionand Windows XP, Vista Business, or Vista Ultimate. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
    5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not yet fully developed for the Mac - some features are not yet implemented - but it does work otherwise.
    6. Last is Q. Q is a freeware emulator that is compatible with Intel Macs. It is much slower than the virtualization software, Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.
    See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion.
    Boot Camp is only available with Leopard. The Boot Camp Beta that was used with Tiger has expired and is no longer available for use. So contrary to the other poster's comment, Boot Camp isn't truly "free." You must purchase Leopard to get it.
    As for warranty if you read yours you will find the caveat that if you perform a DIY replacement your warranty is not affected unless you cause consequential damage in which case the warranty will not cover that damage.
    I have installed several Hitachi drives in my laptops, but not the current model. I've no complaints.

  • HP 2000 running Windows 7 bios shows no hard drive?

    "Press ECS to boot"  appears when turning on power. PXE-M0F error on HP 2000 appears upon boot. F1, shows "System Information," F2 runs memory, and hard drive test (and passes), F9 lists all but hard drive to boot (hard drive was replaced, and is 3 hours old), F10 shows a lot of information, but under "Boot Options"doesn't show hard drive exists! And does anyone know what PXE-M0f error on HP 2000 means? Lastly F11 "System Recovery" with the Internal CD/DVD ROM Drive sellected as first, still doesn't see; or boot the "Microsoft DVD Windows 7 DVD?!!!
    Life in Hell,
    Hank

    PXE just means it has run our of hardware to boot from and is looking for a network boot server (PXE) to boot from. If you turn off network boot as an option in the BIOS that will disappear. If a new hard drive is in it and the BIOS does not see it unfortunately that looks from here like a motherboard issue with the SATA port. 
    System Recovery is set to use the recovery partition on the hard drive or HP recovery disks, not a Windows XP Microsoft disk. To use that just boot off the internal CD/DVD from the F9 boot menu. It might be interesting to see if a Windows 7 install disk sees the hard drive. 

  • Backup methods and external hard drive questions

    I usually copy files and photos to DVDs but wonder if that's enough and the most efficient method to back up.  So I purchased a Seagate 1TB external hard drive.  Here are my questions:
    - What is the best way to copy all my data to this hard drive?
    - Is it necessary to copy everything?
    - Is it possible to partition the external hard drive?
    - Is it possible to use this hard drive to copy data from more than one computer, for instance, my powerbook and a PC laptop?  If so, how?
    Any information on this would be so appreciated!

    Here are some suggestions for backup:
    Backup Software Recommendations
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    Silver Keeper
    SuperDuper!
    Synchronize Pro! X
    Synk Pro
    Synk Standard
    Tri-Backup
    Others may be found at VersionTracker or MacUpdate.
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files.
    You can partition the drive if you need to, but that will depend upon why you would need to partition the drive.
    Personally, I would clone your startup volume to the external drive. You can do this with any of the referenced software as well as by using the Restore option of Disk Utility. You can then incrementally update the clone using a backup utility.
    It would be possible to backup more than one computer in which case you would need to partition the drive. Backing up a Windows machine, however, would require partitioning the drive using MBR and formatting it FAT32 (MSDOS).
    For clarification do you really have a PowerBook (PPC machine) or a MacBook (Intel?)

  • Solid-state hard drive questions....

    Hi, I'm going to get a new Macbook Pro soon to replace my archaic 17" wobbley screened Powerbook and I'm having some dilemmas about picking the hard drive. So heres a few solid-state questions I was hoping you could answer:
    How much faster is solid state than disk (disc?), for example I run Flash and Photoshop alot. If a go for 8gb of ram and 3.somthing processor, will there be a noticeable difference in the speed of these apps opening/running if the hard drive is solid state?
    and...
    If I go for normal hard disk now, is it possible to upgrade the hard drive at a later date (doing it myself or through Apple) to a solid one?
    It's an extra 600 quid that I could be spending on crisps, so is it worth the money?

    While I can't comment on the speed I can comment on changing the internal drive. In short it's a 10-15 minute process. My recommendation would be to start with a traditional HD and see if it's performance is adequate before considering an upgrade. If not as mentioned the upgrade is extremely easy. In fact here is a video that shows it.

  • Hard Drive Question...

    I've just set up an iMac for my granddad... we're trying to set up Time Machine with his external hard drive, which was previously MS-DOS (FAT32) format. He has some photographs and documents on it that we don't want to copy over to the iMac.
    I still want to keep these documents, but I know that Time Machine doesn't work with a hard drive unless it is Mac OS Extended (Journaled)...
    How do I change this disk format without loosing the documents?
    - Thanks

    Most likely, you cant.
    Use Disk Utility (in your Applications/Utilities folder). Select the top line for the TM drive (the one with the make & size). Down towards the bottom of the display, see what it shows for *Partition Map Scheme.* It must be GUID for an Intel Mac, or +Apple Partition Map+ for a PPC Mac.
    If that's correct, then you may be able to partition the drive, making a new partition with the proper format. See the instructions in item 6 of the +Frequently Asked Questions+ post at the top of this forum. But do back-up the data first; it's fairly easy to click the wrong thing and zap the data.
    But most likely, the drive has the MBR (Master Boot Record) format, which won't work. In that case, your only option is to copy the data elsewhere temporarily, then erase and reformat the disk into 2 partitions, and copy the data back to the non-TM partition. See item 5 in the same post.

  • Pavilion dv9429us - hard drive questions

    I have a Pavilion dv9429us laptop with hard drive problems.  Drive 1 is a 120 GB WD that is SATA 1.5Gb/s.  Is the hard drive controller a SATA 1 device - limited to 1.5Gb/s, or is it a SATA 2 device at 3.0Gb/s, allowing me to upgrade to a faster throughput drive (even though the current hard drive is SATA 1)? 
    Also, is there more than one partition on Drive 1 and, if so, what does each contain (for re-creation purposes)?  
    Same question for the 80GB, Drive 2.  And what controls the relationship between Drive 1 and Drive 2 for backup and restoration purposes?
    Thanks for all your help. 

    1) Yes.
    2) They will appear as two individual drives. The only time more than one drive will appear as a single drive is in a RAID implementation.
    3) The simplest wuld be to get yourself a copy of a cloning tool such as SuperDuper!…
    http://www.shirt-pocket.com/
    … and use that to clone from the factory drive to the new drive. However, I personally feel that you would be better off installing fresh drom the DVDs even though it'll take you a couple of hours longer.
    4) I don't like Migration Assistant and will never recommend using it to anyone so you'll probably need to get an answer from someone who does like it. As for when to install the drive, it's really up to you as before or after is fine. Some like to check that everything's working before they make changes in case it needs to go back or be repaired for whatever reason. Some don't care.

  • Lenovo U410 HARD DRIVE Question

    Hey,
    So within the first 2 months of owning the U410 the battery just decided to stop charging. I also changed my password and forgot it and had no way to log back in. Reinstalling WIndows wouldn't work because it didn't recognize any drives. Anyways, this was bought from Microsoft so I had zero bloat ware and basically one partition.
    When I sent my laptop in to Lenovo to fix the battery they had to reimage the drive to gain access to the account. That being SAID I got the computer back and to my dismay, I only had 466gb and 30gb SSD. I originally had 700gb + 30gb SSD. I believe Lenovo actually changed the hard drive without telling me. What do you guys think?
    In the Intel Rapid Storage it says 30gb SS and 466gb HD. I think they are using the standard computer design number for one GB, in metric units (which Lenovo uses) 466gb becomes 500gb. So I really think they changed my hard drive! I'm getting SO PISSED WITH LENOVO.

    hi hibi49,
    Welcome to the Lenovo Community.
    Sorry to hear about your trouble. Usually, after sending the unit for repair, you should get a repair order on what has been done on your system. You can check there if they have replaced the HDD. As an alternative, check this website to look-up your repair status.
    If it's not indicated in the repair order that they've changed anything and you're seing 500GB HDD + 30GB SSD under BIOS (you can access the BIOS by pressing Fn+F2 or F2 during boot-up), I recommend you contact Lenovo to report the incident so that they could investigate what went wrong with the repair and on how to go about getting your original 700GB HDD.
    Hope this helps.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • PB 15" 1.33ghz Hard Drive Question

    I ran the Apple Hardware tests on my laptop a few days back and received the, "2STF/4/3: ATA-100 ATA-6-Master" error code. Hypothesis: the hard drive won't mount and is loaded with errors = HD replacement. It isn't recognized even in disc utility. When the computer starts up, I get the grey apple screen, the little preloader, and a loud buzzing sound coming from just about .25" inch away from the right side of the trackpad. I don't think its the combo drive, because i can still load CD's in there like disk warrior and techtools everytime and they load up just fine. (The HD appears like 2% of the time on loading which leads me down the road of being right on my hypothesis)
    My questions is "does this sound like a hard-drive replacement ceremony in the making?" If so, can i buy just any sized 2.5 inch notbook drive and put it in? Do these powerbooks only accept certain types of ATA? I'm a newbie when it comes to this and would just appreciate a straight answer or at least some direction on it.

    Welcome to the Apple discussions.
    You can replace your hard drive with a parallel ATA 2.5" notebook drive. You have two basic speeds available, well three but I wouldn't recommend the slowest: 5400rpm and 7200rpm. 7200rpm will provide snappier response from hard disk operations, carries a small price premium, and tops out at 100gb. 5400rpm drives top out around 160gb. Most drives have a 3 year warranty, however many Seagate drives now have a 5 year warranty.
    One source with a good selection of hard drives is OWC. Note, the serial ATA drives at the top of the OWC page are for Intel-based notebooks only.

  • Time Machine & Airport Extreme Hard Drive Questions

    I purchased a LaCie 500 GB hard drive to use as a backup for Time Machine intending to attach it to my Airport 1802.n. It would not mount on my MacBookPro 3.1 and Time Machine didn’t see it. I could see the Drive using Airport Utility but not using Airport Disk Utility.
    I then tried to get Time Machine to recognize LaCie by directly attaching it to my computer and let Time Machine use it for the initial backup (This is a painful way to operate!). After completing the backup, I reattached it to Airport and manually mounted it using “Connect to Server…”, the only way that it would mount.
    I then entered Time Machine Perfs and Time Machine knew it was attached. So, I started a backup. Instead of using the LaCie, a disk image named Backup of Gene’s Mac appeared and Time Machine put a full backup on the image. My LaCie got a strange folder added named “NAME.sparsebundle”. It’s not sparse. The folder contains 21 GB. It is the size of the original backup. Ultimately, I rebooted and everything on the disk image went away. Time Machine now produces an error message when it tries to start. The message is “Unable to complete backup. An error occurred while creating the backup directory. I handled this problem by turning Time Machine off and then rebooting. I dragged the disk image to the Trash and remounted the LaCie. I then turned Time Machine On and started a backup. The disk image reappeared and was loaded with all my backup.
    Questions:
    1. What is a “.sparsebundle”? Did Time Machine create the folder on the LaCie?
    2. Could I move the files put on disk image to the LaCie without messing up the backup process? Could they be recovered if necessary?
    3. Can anyone explain what happened when I went through the procedure described above?
    - MacVet123

    A sparsebundle is a 'bundle' ( that is, a folder which looks like a single file-- iPhoto library, and even Applications themselves are bundles ) which is a disk image . That is how TM backs up across AirDisk. It's not the same backup mechanism as if the disk were used locally. I can't help you past there but hope it works for you, I'm still not to that point yet.

Maybe you are looking for