BIOS doesnt recognize SATA connected Hard Drive- need help flashing bios from bootable USB

hi
I have an envy laptop running InsydeH20 bios rev f14.
the bios doesn't recognize the internally connected hdd/ssd.
I have heard that with insyde bios', sometimes you have to unlock 'secret capabilities' to recognize hardware incl internal hdd.
but I am just trying to reflash my bios.
the problem is that I cant get into windows because it doesn't recognize my hard drive and windows doesn't allow insallation to usb connected drives.
I downloaded the patch from hp.com for my product and it actually has an option for making a bootable USB for use on the actual system, and I did this. the instructions are to just restart my computer with the bootable usb. I have tried Legacy support on and off, neither updates bios.
I highly doubt it has anything to do with the physical sata connector.
basically I need to flash my bios from bootable usb. I have done some research about making a bootable dos usb etc etc but I don't know what program to even run and how..
this is a link to my product:
http://h10025.www1.hp.com/ewfrf/wc/product?cc=ca&dlc=en&lc=en&os=4132&product=5400031&sw_lang=
Pleeeeeaaseee someone help!!!!!!!!!!!!!!!!!!
Thanks!!

hi
I need to flash the bios of my system. the bios is not recognizing hardware and cannot boot into windows to run the bios flash for windows.
on my other comp I ran the bios update patch and chose ' install to bootable usb ' so that I could use it on my system.
cannot run on my laptop. tried booting from the media. tried allowing 'legacy' compatibility.
im running insydeH2O rev f14 right now.
here is a link to my system:
http://h10025.www1.hp.com/ewfrf/wc/product?cc=ca&dlc=en&lc=en&os=4132&product=5400031&sw_lang=
thanks to anyone who can help!!!!!!!!!!!!!!

Similar Messages

MSI P965 Neo-F Bios doesnt recognize my DVD RW driver,Help!

Hi,
I just bought a MSi P965 Neo-F motherboard and when i boot the pc because bios cant find the DVD driver and
i cant start my windows xp 64.
I thought og upgrading bios but i cant because i dont have floppy driver and my cd drive is unknown for bios.
DVD model: NEC DVD RW ND 3540 A
system info:
Maxtor 120gb
Duo core 2 E6400 2.13
Corsar 1024 DDr II 2X512
Asus PhysicX
Gforce7800GT 256
Help!
plz..

Quote from: Zimbower on 14-February-07, 18:50:18
Hi,
yes i do get the green message about the dvd in green color after the memory check(MSI logo)
somthing like ODD0 DVD RW
I will try the second option you recommended,thx alot.
Hello, welcome to forum. if you are planing to update BIOS:
get P965 Neo BIOS ver. 1.6 CD Image (have modded boot record and integrate JMB361 Dos drivers.)
How do i flash it?
Extract image file from archive, and burn it to CD.(example: open it with nero burning rom and burn image file to CD)
Make and ensure PC is stable, then reboot PC and boot from CD. you will need to confirm twice BIOS update when asked.
after BIOS update is complete successfully, power down your PC, remove power cord from the PSU, hit few time power button to drain electrify from capacitors, touch some metal with hands to discharge any ES which you may have, then open the case and Clear CMOS then pull back power cord, and turn on your PC, will be notice CMOS CHEKSUM MISMATCH/ERROR, hit F1 to continue to rebuild DMI Pool Data, then reboot your PC, and enter in BIOS and LOAD BIOS DEFAULT, SAVE AND EXIT, go back to BIOS and apply your customs settings.
if you want to use USB key to flash BIOS, copy AWFL865.EXE & W7235IMS.160 to USB drive, reboot PC and boot from bootable location, (hold "SHIFT" key when starting loading from bootable device to bypass startup files to avoid loading memory managers and other applications) navigate to folder which containt flash program and BIOS file and type from there:
AWFL865.EXE W7235IMS.160 /cks/sn/py/cc/cd/cp/wb/ld/qi/f/e

Can I get my bios to recognize a 3TB Hard Drive?

The system is
HP Pavilion Media Center m8430f Desktop PC
The bios version is 5.43
It keeps reading the drive as only 750g
I have the newest firmware for the drive.
The hard drive is a Seagate Barracuda ST3000DM001
This question was solved.
View Solution.

UPDATE---
First get the latest INTEL RAPID STORAGE TECHNOLOGY update.
This will allow windows to recognize the drive completely but will only allow you to allocate 1.3tb - which leaves another 746g
Then using the SEGATE DISCWIZARD mentioned by 'Provost'(thank you) will then allow you to allocate the remanding space.
UPDATE---

Upgrading Hard Drive need help with making it work.

I have just begun copying my HD to a 120GB 2.5" SATA drive.
I'm using Super Duper to copy it, and I understand it will be a bootable disk.
Once it has completed copying, is there anything I need to do to make it the startup disk ?
Do I make it the startup disk before I swap the hard drive out from within System Preferences ?
Also, it is currently called Disk 2 - Will that become the name of my HD (currently obviously called Macintosh HD)
If it is, can I then change the name ?
Any help would be greatly appreciated
Thanks

SuperDuper will make it a bootable disk if that's the backup option you selected. Look at the SD feedback information. It tells you what it will do and will then show the steps checking off each one as they are completed.
All you will need to do is remove the old drive and install the new one. It should be ready to go if you did everything correctly. This includes partitioning the new drive using the GUID partition scheme, setting the format type to Mac OS Extended (Journaled), and then Erasing the drive using the Zero Data option.
Be sure to test the cloned drive before installing by booting the computer with it while it's in the external case.
You can rename the drive anything you want.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Replaced hard drive: need helping getting songs off ipod to itunes

I recently had to send my computer into apple for repair, needless to say they had to replace my hard drive so i lost all of my music. However it is still on my ipod, so i was wondering if there is a way to transfer it from my ipod to my computer

Connect your iPod to your computer. If it is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. When your iPod appears in the iTunes source list change the update setting to manual, that will let you use our iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default: Managing content manually on iPod
Once you are safely connected there are a few things you can do to restore your iTunes from the iPod.
The transfer of content from sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve music files and playlists from your iPod. I use Senuti but have a look at the web pages and documentation for the others too, you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos and games as well. This is just a small selection of what's available, you can read reviews and comparisons of some of them here:
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
Senuti Mac Only
PodView Mac Only
PodWorks Mac Only
iPodDisk PPC Mac Only (experimental version available for Intel Macs)
TuneAid Mac only (iPhone and iPod Touch compatible)
iPodRip Mac & Windows
YamiPod Mac & Windows
Music Rescue Mac & Windows
iPodCopy Mac & Windows
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
Keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.

HT1338 I was backing up my MacBook with Time Machine on my new (correctly formatted) external hard drive. It was going fine when my 2 yo knocked the hard drive. Now TM said "failed" and the Mac refuses to recognize the external hard drive. Help please?

I was backing up my MacBook with Time Machine and using my new (correctly formatted) external hard drive. All was going well when my 2 yo knocked the disk leading to a "failure" by time machine (Latest Backup: Failed). Now the MacBook will not even recognize the hard drive. I have rebooted, tried all I can think of, but no acknowledgement of the drive. The drive itself makes noise and vibrates as if working, but nothing from the Mac. Please help or $100 down the drain... Thank you.

You may have already done these resets in the "tried all I can think of " portion of your post.....if not then here they are.....
PRAM
support.apple.com/kb/HT1379
SMC
support.apple.com/kb/HT3964
.....hopefully that is all that is required.....

Question about hard drive, need help lol.

Hey I'm kinda new to the MacBook world and have a stupid question. I am getting a late 2009 MacBook unibody (white polycarbonate, model MacBook 6.1... I believe) I am switching the original 250gb 5400 rpm hard drive out for a Seagate Momentus XT 750gb 7400 rpm hybrid hard drive. I want to keep everything on the original hard drive and just pop the new hard drive and start fresh with Snow Leopard. I'm going to purchase the SL cd from apple but I do not have the original grey start up cd that came with it (my girlfriends little sister lost it). Do I need to call apple for that cd in order to start fresh on my new hard drive or is everything I need on the SL cd?
Also how do I go about wiping the whole computer when I put the hard drive in and use SL? I want to essentially have a completely clean laptop with a new hard drive.
Thanks for your help in advance.

The SL disc you get from Apple will do everything you need. When you nstall the new hard drive there will be nothing to wipe, the drive is the only piece of that Mac hat stores anything so you don't need to worry about that. Post back and let me know how that hybrid drive works out....I'm interested.

Partitioning a 1TB hard drive - need help!

i would like to partition a 1 terabyte external usb hard drive into the following partitions
1 partition to hold a bootable snow leopard installation (so i can reinstall via usb, install bootcamp, add stuff, etc)
1 partition to hold a tiger installation (for my ageing g5 imac)
1 (largest + what remains of the 1TB) partition formatted in ntfs to put the rest of my multimedia/documents to be read by a pc (running XP or windows 7), ps3 + xbox 360.
would appreciate some help here as i have no clue where to begin.
i am running snow leopard on a macbook. thanks!

The program you're going to need is called Disk Utility - it's under Utilities in the Applications folder in Finder.
There's a Partition tab in the utility, which is where you'll start. You'll see your external disc, which you can carve up into various pieces. It's all pretty self-explanatory from there on.

Upgrading hard drive, need help!

I found a good deal on a hard drive at best buy, but I'm not sure it's right... I can't a model number on any of the mac specialty sites. Could someone check out my link and tell me if it will work and if it won't what I need to be looking for in the specs? Thanks. (the more opinions the merrier!)
http://www.bestbuy.com/site/olspage.jsp?skuId=8354586&type=product&id=1176507039 848

I have just upgraded my iBook with the same hard drive.
The only issue, this happened when upgrading the hard drive on my iMac as well.
I have the MacOS 10.3 restore dvds for both computers. When you boot up from the DVD. Format the hard drive on Disk Utility. The Drive formats but isn't able to have the OS saved to it via installer. Leave your DVD loaded quit installer turn computer off. Turn on computer you can now save the OS to your hard drive.
Might be different with MacOs 10.4 restore DVDs

CS3 on old hard drive need help to activate

My HP motherboard failed (manu defect) the hard drive is fine and has my adobe CS3 suite on it. I bought a new laptop and tethered the old hard drive to my new computer. I try to start the cs3 but a pop up says my computer lacks an adobe llinguistic code?? I moved and lost the serial on the case. How do I use my cs3 from the old hard drive?

You probably do not use it from the old hard drive vecause the program needs to be installed on whatever machine is trying to use it... even if you intentional;ly tried to install on a separate drive the program still needs to install some ellements on the main system drive.
If you check you Adobe account online you might find the serial number there if you registered the program. You can download CS3 applications thru the following link: Download CS3 products

My 27" aluminum imac no longer recognizes its own hard drive. i start up from the disc, but get no destination to install. whatever am i to do???

it shows up in disc utility as "media" unable for verify or repair. as a target disc all that appears is the install disc. anyone else have this problem??

Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. Is your hard drive at least listed in the DU sidebar? If so, select the topmost entry (drive mfgr.'s name) and not what is displayed for the SMART status in the DU status area. If it does not say "Verified" then the drive itself has died.
I would also suggest you shut down the computer for a full minute then restart doing the above in order to see if the drive "comes to life."

New hard drive need help

I have the dv4 and the hard drive crashed a while back. Just got a new hard drive for it and installed it and I get a blackscreen with a blinking cursor. I've read some other posts and am currently running the hard drive test through the f10 page. I have a windows 7 disk in the disk drive.wouldn't it load up automatically?
This question was solved.
View Solution.

Hi,
Try the following.
Remove the Windows 7 installation disc and shutdown the notebook.
Tap away at the esc key as you start the notebook to enter the Start-up Menu. Insert the Windows 7 installation disc. Select the Boot Options menu ( usually f9 ). Use the arrow keys to highlight the CD/DVD drive and hit enter - if prompted to 'Press any key to continue......', do so.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

My girlfriend reformated her iPod as a Hard Drive, need help.

My girlfriend reformated her iPod as a Hard Drive by accedent when trying to format a Mac iPod for Windows. How does one make this iPod be reconized as an iPod again rather then as an external HD? The iPod in question is a iPod nano, 16 GB running iPod software 1.0.4

When the iPod is formatted by Apple's installer software and disk mode is enabled it will mount as a single FAT32 partition...you can store stuff on it given the remaining size left over from your music/photo files.
Sub-partitioning and playing file/formatting games on your own is unsupported and will have unknown behavior....you can try it and rerun the formatter if it gets scrwed up, but the iPod is music device first, not a generic drive that you're supposed to monkey with.
Tom

Can I switch out a hard drive for an SSD without having to clone the existing hard drive, and then install Yosemite from an USB Boot Drive onto the new SSD?

Can I simply replace a hard drive with a new SSD and just install Yosemite from a USB boot drive onto the SSD? I recently bought a used MBP and it has absolutely no files on it except for the OS, and so I'm assuming I don't need to clone the current hard drive as I can just reinstall the OS onto the new SSD.

Honey_Revenge wrote:
Thanks.
Just a quick follow up question, is formatting the SSD with HFS+ done in Disk Utility?...
It's possible that the SSD will be set up for use on a PC, which means it will have a Master Boot Record partition table rather than a GUID Partition Table, which is what Yosemite needs. In Disk Utility, select the SSD and click the Partition button. Create a new Partition Layout and click the Options... button at the bottom. You'll likely see MBR is selected. Choose GUID instead and Mac OS Extended (Journaled) for the Format.

I need help flashing bios

hi how to update flash bios? it is safe?
i already download at the lenovo driver page.
i don't have dvd drivers
btw is g460
Solved!
Go to Solution.

if issue doesn't persist with windows media player, try to re-install k-lite.

BIOS doesnt recognize SATA connected Hard Drive- need help flashing bios from bootable USB

Similar Messages

Maybe you are looking for