BIOS don't skip to OS after Toshiba install USB HDD

After I start my computer and my new harddisk is ON the computer hangs at the bios and will not start Windows XP
Toshiba USB 2.0 ALU 3.5"
In BIOS option USB LEGACY ENABLED
tnx for your answer

What laptop model do you have? Tell us the Pxxxxx-xxxxx number on the Base Serial Sticker.
Are you trying to boot from an external USB HDD?
If you have replaced the internal HDD, you need to run Recovery from your Recovery Disc to reinstall Windows.
If you dont have a recovery disc, you can order one from the Toshiba website.

Similar Messages

HT3576 I don't have Push notifications after I install IOS7.

Idont have Push Notifications after install IOS7 in IPhone 5

This may be a bug or they were simply disabled. Go to Settings> Notifications and then add apps to the Notification Center. If that diesnt work you may be in Do not disturb mode. To get out of do not istirb mode slide up from the bottom of ther screen to suppon control center and tap on the moon so it is not lighting up.
MACOSX24

Running sysprep AFTER I install a HDD into a new PC without the old PC?

Is it possible to run sysprep on a HDD that I
install into a NEW PC without having access anymore to the old one? I know you
have to run sysprep on the old PC while the HDD is plugged in and running system
and then you sysprep it with generalize but is it possible to do this
afterwards? Maybe you don't have the source/original PC....
Thank you

Hi,
What do you meand by "source hardware"? The HDD isn't built in the computer? sysprep relied on the Windows you installed, you should run the sysprep.exe at where the Windows is installed.
Regards
Wade Liu
TechNet Community Support

[SOLVED] BIOS not detecting USB Drives after i installed Arch

SOLVED: In BIOS under 'Advanced' disable 'Fast BIOS Mode'.
Original post:
Hi there!
I'm fairly new to the arch (and linux) scene and just setup my Samsung 530U3B with a brand new installation of arch. Everything went fine and the system is running flawlessly. Almost.
I just happend to notice that BIOS is not checking for USB drives anymore, it just somehow skips that part. If enter the boot selection, the bootable USB drive won't show up. Neither does it show up in BIOS setup. I tried to boot with the same USB drive that i used to install arch just yesterday, the live media does not boot - the drive doesn't even blink. The boot priority is set to usb drive first, the boot selection screen (hammering f10 during boot) doesn't give me any other option than to boot from the normal SSD. Also, prior to the arch installation (came with w7 installed) the BIOS screen would stay for about 2seconds and then proceed to boot - this doesn't happen anymore. When i press the power button greeted by the grub bootloader in about 1s.
I tried 2 different usb drives, both with the arch iso (same that i used to install the currently running OS, downloaded yesterday). The drives also show up once my arch is booted (starting to blink just after i hit enter in grub). Also, both drives boot without a problem on my desktop computer.
Anyone got any ideas?
I don't really now what kinda of information would be helpful so i'm just dumping stuff i know:
BIOS: Phoenix SecureCore Tiano Version 04XK
Machine: Samsung 530U3B
SSD: Samsung MZ7PC128HAFU-000
ISO used to install (checksum ok): archlinux-2012.07.15-netinstall-dual.iso
Last edited by araex (2012-07-26 16:57:47)

DSpider wrote:
The boot priority is set to usb drive first
Welcome to the forum.
If you just set the USB stick to be first in the boot order, the next option (from the list) takes its place the moment you unplug it. You need to set the BIOS to boot from your equivalent of "Removable Devices" first, "Internal Drives" second and "Optical Drives" third.
The USB stick doesn't show up at all. I set the priority as follows:
1. USB HDD
2. USB FDD
3. USB CD
4. SATA CD
5. SATA HDD
6. NETWORK
I used that same configuration to install arch. USB doesn't seem to initialize at all. Also, if i enter "usb" in the grub commandline, no devices are listed.
Thanks!
UPDATE:
I just figured it out. In my BIOS under 'Advanced' the 'Fast BIOS Mode' was enabled, once i disabled it, everything went fine. I don't remember changing that option. Silly me.
Sorry for your time
Last edited by araex (2012-07-26 16:56:30)

How much $$$ will Verizon charge me if I don't return the Fascinate after receiving replacement?

How much $$$ will Verizon charge me if I don't return the Fascinate after receiving replacement?
I spoke with customer service and couldn't get a real number. She just said it "could be up to $500, or more"
to be determined after they don't receive it within the 5-day period.
Is there a way to find out for sure how much it's going to cost?
Thanks!
Here's the reason I'm asking:
I forgot to drop it off at FedEx on the way to the airport. My entire family is now on an overseas trip and won't
be back for 8 weeks. The Fascinate, packed in Verizon box with FedEx box, is now sitting in my car trunk at
the airport long-term parking lot. I was supposed to stop by the FedEx office at the airport cargo area to drop
it off, but forgot about it during the rush.... (yes, I do realize it's a stupid mistake that may end up costing a
lot of money)

Hi and good morning!
I would like to review your account with you and ensure I can help resolve any concerns you have about being charged for this device. Please PM me directly so we can discuss this together. Also, include your name and mobile number with your PM to me.
Thank you so much and have a safe overseas trip!

After update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.

hello,
after update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.
the used ports appear to be "killed"; the unused USB ports seem to work, but the Mac works in slow-motion.
The only "solution" is to restart my Mac.
- SMC-reset, PRAM-reset or repairing user rights had no positive effect; what is the solution - a bug-fix-update???

I have a mac mini (A1283) with OS 10.7.4. Upon upgrading to 10.7.5 it did not start up again. Instead, the light was on and the hard drive did not start up. The light on the connected USB mouse was not lit.
My solution:
Cold start with Command-v pressed.
This should start Verbose mode (see http://support.apple.com/kb/HT1492 ).
What happened on my mac mini was that the grey startup screen with the Apple logo appeared for a long while before the login screen came.
Maybe Cmd-v set open firmware params and fixed some corruption.
Anyway: my mac mini works again.

I've done a project on iMovie, after it finished finalising, i just closed iMovie, now i think i've lost all my work because i can't find it and when i found it, the movie was just black - please help

I've done a project on iMovie, after it finished finalising, i just closed iMovie, now i think i've lost all my work because i can't find it and when i found it, the movie was just black - please help

Hi
More info please
• Free space on - Start-Up (Mac OS) Hard Disk ? How much ?
• Any other hard disks connected ? Formatted as ?
Yours Bengt W

Why don't my photos save after taking photo?

Why don't my photos save after taking photo?

when you have the photo stream feature ON every photo you take with ur iPhone, when the iphone connect to any wifi spot that photo will be saved into photo streaming, is not possible when you are not connected to any wifi

Dvds don't play after new install

hi,
after a harddisk crash i installed 10.4.3. on a new HD. before the crash my superdrive was set to region 2 DVDs. after the install dvd player opens but dvds don't start. i only see thin stripes.
i did try with a region 1 dvd but was told that i only can switch once more (out of the 5) which i cannot do right now, because i am in europe for a while.
any help?
thanks.
powerbook G4 12" Mac OS X (10.4.3)

Welcome to Apple Discussions!
This is definitely one of the pitfalls of travelling a lot. Region free DVD hacks exist for the drive, but whether or not they will affect your warranty if something goes wrong is hard to say, and I'd take up with AppleCare by phone before trying such a hack. Here are their worldwide phone numbers:
http://www.apple.com/contact/phone_contacts.html
You may also try the hardware test if you have that:
http://docs.info.apple.com/article.html?artnum=86287
just to make sure the graphics chip wasn't loosened.
And try VideoLan Client which sometimes works when Apple's own DVD Player does not.

When I'm composing emails a dialog box keeps popping up asking me to click "resend" to reload my email. If I don't I get timed out. This problem has only happened after I installed update 3.6.16

When I'm composing emails a dialog box keeps popping up asking me to click "resend" to reload my email. If I don't I get timed out. This problem has only happened after I installed update 3.6.16
FYI I am referring to my ISP email on the providor's website, although I have not tried opening other email accounts on the updated Firefox.

etresoft a long time contributer to Apple Support Communities wrote a very useful app he called etrecheck which helps in diagnosing many problems caused by third party installs etc.. Go to his website, read his information and from there download and run the program according to his instructions
http://www.etresoft.com/etrecheck
Post the results back here
Pete

After automated install of Lightroom 6 (CC), Lightroom 6 don't start! I did reboot my computer and Lightroom 6 still don't start.

After automated install of Lightroom 6 (CC), Lightroom 6 don't start! I did reboot my computer and Lightroom 6 still don't start. The same time I updated Photoshop CC and Bridge > no problems what so ever.
Is it wise to remove Lightroom 6 and reinstall?
Robert de Jonge

Could you try to logout- and in again via the CC-app and start LrD 6.0 afterwards.
Hope that helps.
Guido

Why don't iBooks shows definition after I have updated to iOS 6?

Why don't iBooks shows definition after I have updated to iOS 6?

The same reason why you can't use it under iOS5. It's exclusive to devices since the iPhone 4S.
(for selling new products)
So iPhone 4S, iPad 3, iPhone 5 and iPod Touch 5.
Thinking about other features, you may be interested in 3D-Maps, but there for, you need an A5 CPU or better.
So iPad2, iPhone 4S, iPad 3, iPhone 5 and iPod Touch 5.

After i install mac iOS 10.9 my tarckpad out of may control and do automatic work that i don't want do it

after I install new version of mac osx 10.9 my trackpad is out of my control and Do anything tahat i want do them

Hi Mohammad,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
Portables and Magic Trackpad: Jumpy or erratic trackpad operation
http://support.apple.com/kb/TS1449
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
Cheers,
- Judy

An error message after I install my sound card

I have one of MSI product. K7N2G-L (MS6570) mainboard for AMD processors. It's bios version is 3.5 (I have flashed it because of the CPU temprature measurement problem, now it show 20 C lower temprature of CPU than it was. Is this normal?).
My operating system is Windows 98 SE. After I install window I install my sound card. My sound card's model is Creative Sound Blaster Live Value. But after I install Nvidia nforce system drivers and my sound card drivers, whenever I reboot my computer I see an error message. The message is:
" EMM386 not installed - unable to set frame page address "
and after this message there says: press any key to continue.
In fact, after a while Windows 98 starts, even I don't press a key. Why I see this message and how can I prevent to see this message. What is wrong? What should I do?
If you can help me about this problem I will be so glad.

Hi..
I am not sure but this might be one of those DOS drivers that load off the autoexec.bat.. (COs win98 does not use emm386 for extended memory managenent)..
Try this... Go to the MS-DOS command prompt, type
C:
CD
NOTEPAD autoexec.bat
And search for a entry that is referting to a file in the Live installation directory and add the words REM infront of it...
Ex.
C:LiveLoad.exe
make it
REM C:Liveload.exe
Chances are u will not be needing this file to get audio in the system...
Good Luck
Rasika
[EDIT]
Try putting rem infront of entry in the audoexec.bat.. u sould be able to catch it easyly

BIOS don't skip to OS after Toshiba install USB HDD

Similar Messages

Maybe you are looking for