"bios failed" help to get it back

1.Product Type: MS-7032 VER:1 , K8T NEO-V
8.Problem Description:
I WANTED TO CHANGE IDE HARD DISK WITH SATA 2 AND I SET IT TO SATA 1 WITH JUMPER AND IT SEE IT IN BIOS BUT WHEN SETING UP SISTEM WONT SET IT AND SEYS "THERE NO HARD DISK RESTART" BUT IT IS IN BIOS.SO I UPDATED BIOS WITH THIS ONE "A7032VMS.370" AND AFTER THAT IT WONT WORK .I THRAY TO START IT WITH FLOPPY WITH RENAMED BIOS VERSION A7032VMS.110 LIKE AMIBOOT.ROM AND HOLDING CTRL,HOME BUT NOTHING FLOPPY DONT START.HOW TO SOLVE MY PROBLEM AND START IT, THE KOMPUTER WAS GREAT UNTIL CHANGE BIOS

welcome to forum,
please remove caps in a future posts.
where you get this A7032VMS.370 ??
as i can see there no such version on MSI site for your mobo:
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=648&kind=1
"THE KOMPUTER WAS GREAT UNTIL CHANGE BIOS"
don't think that your problem will be solved by BIOS update. you have to ask about your problem 1st, and not to try to fix yourself.
anyway what is done is done, cannot roll back the time.
that message:
"THERE NO HARD DISK RESTART""
few variants:
    there is no HDD detected,(no power cable or data cable, or mistyped jumper configuration) no property boot device configured, or there is no active partition on HDD which you have tried to boot from.
BIOS update will not help with that for sure.
Read Moan Guide
about recovery read this:
https://forum-en.msi.com/index.php?topic=99371.msg720224#msg720224
if no luck you should read this also:
https://forum-en.msi.com/index.php?topic=101777.msg743246#msg743246
when your mobo is back to live, will solve your 1st problem, but unfortunately you have much worse problem now.
keep us updated.

Similar Messages

  • HT5538 i can't find the facetime on my iphone i was using it before 1 month after that it's just disappear i need your help to get it back . thank you

    hello everyone i need your help please
    i can't find the facetime on my iphone i was using it before 1 month after that it's just disappear i need your help to get it back .
    thank you

    FACETIME MISSING
    The governments in some middle eastern countries have banned Facetime and it is disabled on iphones purchased in those countries.  The countries include KAS, UAE and others.  There is no way to get Facetime on such phones (for example it cannot be downloaded and installed) and taking the phone to another country does not cause Facetime to reappear on such phones. In  support.apple.com/kb/ts3367  it says “Note: FaceTime may not be available, or may become unavailable, on devices purchased or used in certain countries, including Saudi Arabia and the United Arab Emirates. Check your device's region of purchase for more information.”

  • I accidently deleted my url box at the top of safari. I believe I did this with the command key. Can anyone help me get it back? Thank you in advance!

    I accidently deleted my url box at the top of safari. I believe I did this with the command key. Can anyone help me get it back? Thank you in advance!

    Right click (cntl-click) on the top of the bar and select "customize toolbar".  Drag the default set back in.
    Regards,
    Captfred

  • After updating my computer, my iweb is not opening...please help me get it back!

    after updating My computer, my iweb is not opening...please help me get it back!

    Verify that your domain file is located in your Home/Library/Application Support/iWeb folder which will be invisible. However, 
    NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
    For  Mavericks, 10.9,  go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
    Next:
    To open your domain file in Lion, Mountain Lion or Mavericks or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    Since iWeb has discontinued by Apple the new systems don't handle the iWeb preference pane as it was in earlier.  The script corrects that situation and once you open the domain file the first time you can just use iWeb to open it from there on.  However, you'll need it if you plan on using more than one domain file. And adhear to the warning above.

  • The basic sliders disappeared. Including the Exposure, Contrast, Highlights, Shadows, Whites, Blacks, Clarity and Vibrance Sliders are no longer available. I need help to get them back

    The basic sliders disappeared. Including the Exposure, Contrast, Highlights, Shadows, Whites, Blacks, Clarity and Vibrance Sliders are no longer available. I need help to get them back on the program. 
    I can't figure out where the sliders went and how to put them back on. Anyone have any suggestions?
    Thanks

    In Lightroom, go to the Window menu, select Panels, select Basic

  • Msi z87 both bios fail help me

    i sent it to some technical shop and they said it's bios fail but they had problem they said they need the bin file or what ever it extension to setup it through spi programmer usb or something like that but they failed to get it through msi site and they need me to contact msi supporters to provide me with that file so they can charge my bios again
    because on the site only the exe normal users file and they need the one they can use through spi programmer can the moderator help me please and gimme this file to give them
    my motherboard is
    msi z87 mpower revision 1.0 first release and i want one to work with i54690k the latest bios update with some extension to work with spi programmer tool

    okay the motherboard at last now can work but here is the issue after we used the binary file to make the bios and its done
    the motherboard powers on and boot at some models of power supply the old models at the technical shops which they use
    Ex: cougar S 700 watt
    while it do this issues with other models :
    1st : maybe no power at all never take the power or leds light up after several trys with EX psu : seasonic eco 600 watt
    2nd : powers on but don't boot just the leds light up and and the debug code doesn't work stays 00 and no screen but leds lights up only and vga fans etc EX: psu cougar 700 watt cmx (new model recent sellable at shops)
    3rd :  with other psu it just had other symptoms like infitie restart loops
    so at prief the motherboard work with the old 700 watt psu at technical shop but the same brand newer model sold now days same wattage 700 watt cougar fail to make the motherboard boots could someone suggests to me anything to do
    what could make some motherboard with fine with an old psu 700 watt and fail with same but newer model at market now which already tested and works with other motherboards fine

  • Pls help me get itunes back on my computer.  runtime error R6034 and error 7 windows error 1114

    when i updated my itunes i got an error that it couldnt install it and to do it manually which didnt work either so i tried the uninstall and reinstall but i keep getting a runtime error R6034 and error 7 windows error 1114 and it wasnt installed correctly.  pls help so i can get itunes back on my computer.  i use windows vista. thanks so much in advance.

    Hi shannonvc,
    If you are having issues with iTunes after an attempted update, you may find the following article helpful:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Regards,
    - Brenden

  • IMovie no longer displays my iTunes or my iPhoto libraries.  Can anyone help me get them back?

    My iTunes and my iPhoto libraries no longer display in iMovie.  I have to drag and drop directly from the applications.  Can anyone help me get the them back?

    I tried to restore from back up but this was the first time I connected my phone to my computer so when I ran backup my contacts did not return.  When I go to mobileme.com my calandar shows up but not my contacts.  I could cry. 

  • Help to get apps back on to iphone!

    I need help.  I to ios5; my apps are on my itunes on my pc; i can't seem to get them back on to my iphone...some come back and some don't and i have them checked off!  yes, i am syncing...

    settings - general - reset - erase all contents and settings.  This will wipe your phone clean, then after it is done you can restore from your backup.
    using mutiply apple devices on one computer http://support.apple.com/kb/HT1202

  • I went over to iTunes Match and have lost about two thirds of my music collection. Can anyone help me get it back?

    I recently decided to pay for iTunes Match to save memory space on my two iphones, where I have an extensive music collection, which was synced with an iPad and several MacBooks and a desktop. However I am really horrified that in so doing I seem to have lost two thirds of my music which has just disappeared, as well as my playlists.
    I think I've lost at least 700 tracks.  I don't even know what I had. How can I get it back?
    Please help.

    Where these tracks also stored in iTunes before you turned on iTunes Match? If not you're going to need to re-download them from your purchase history in the iTunes Store since iTunes Match only matches music in the iTunes library.

  • My "New Tab" button is gone. Please Help me get it back

    After i messed with customizing my toolbars, i wanted to open a new tab and the "New Tab" button was gone! how can i get it back? I have the "Nightly and Aurora" persona on. Please help.

    How do I Customize or Rearrange Toolbar items?
    * https://support.mozilla.com/en-US/kb/how-do-i-customize-toolbars#w_how-do-i-customize-or-rearrange-toolbar-items
    Check and tell if its working.

  • My adobe audition app I have payed disappeared so I had t uinstall the program and need to help to get it back: have tried to download it again but it dont work! This has happend twice now.

    Hallo! I ned help to get my adobe audition app as I have payed for back to my computer. I had to uinstall the program also creative cloud  since I didnt have the audition app any longer? This has happend before and I like have my money back as I have payed for it or help from tthe adobe team to install it again with the app.
    Thank you for help
    Lise Tollefsen Slembe

    Does your Cloud subscription show on your account page?
    https://www.adobe.com/account.html for subscriptions on your Adobe page
    Some general information for a Cloud subscription
    Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  • I just got my mac and well, i made a mistake. i accidentally put my downloads in the trash and forgot about it, i neglected to look at what was in the trash when i pressed the 'empty trash' button. please help me get it back!!!!

    I just got my imc, and well....i made a mistake. i accidentally put my downloads in the trash and forgot about it. when i emptied the trash later i neglected to look what was in the trash before i deleted it adn i cant get it back. please help me!

    Go back to the site(s) from where you got the downloads from & redownload them. 

  • Lost my flash and need help to get it back!!

    I have windows 7 home edition and have always had Adobe Flash Player until one day I was instructed to reinstall it.  Puzzeled as to why it was removed I followed the download instructions, got stuck on step 2, clicked the icon that stated "if you are having problems with your download click here." Still nothing.  I have tried a few times with no luck.  Help me get my flash player back please!!  Thank you!

    Can you please visit this page and follow the instructions for downloading and installing?
    https://get.adobe.com/flashplayer

  • Will Apple help me get Panther back?

    Hi,
    I recently had to do a complete wipe of my five-year-old dual USB iBook after a leaf count error (no idea what that means, just that the disk utility and fsck couldn't do crud for it). I saved what I could on an external HD and now I'm looking to rebuild my system. The problem: I can't get back to my former OS (10.4). The reason for this is, my 10.4 state of bliss was due to an upgrade DVD that my then-partner used on my computer, running 10.3 at the time. Why did I have 10.3? Well, I sure didn't purchase it! Back in the day, I actually sent my iBook in under AppleCare for the notorious logic board repair/replace a couple years ago and it came back with 10.3 installed, gratis! Very cool...except now I have no disk for it. I DO have the upgrade DVD for Tiger, but that won't work while I'm running Jaguar (10.2).
    Will Apple help me out with this if I, say, take it to a Genius bar? I know I just got lucky with the AppleCare upgrade, but I've been running my life around 10.4 for awhile now and 10.2 feels like the stone-age. Is there any way I can convince them to help me restore it back to its former Tiger self?
    (by the way, my computer is still beeping to itself occassionally...I'm just going to try to ignore that sound).

    HI, Andrea. More or less by accident, Apple has allowed you to use Panther and then Tiger on a trial basis at no charge for some time. Your next step is to buy one of them yourself. You aren't owed another free copy of either.
    If the Tiger DVD your ex-partner used on your machine was an upgrade-only disc, it may have been offered at a deep discount to buyers of new Macs who purchased them with Panther installed, but after Tiger had been released. I got a Panther upgrade installer of the same kind on that basis a couple of years ago, when I bought a new Powerbook with Jaguar installed on it after Panther was introduced. The license for the software on that disc allows it to be installed on one and only one Mac.
    In any event, you need to pony up for a retail installer of the OS you want.

Maybe you are looking for

  • Usage Report for SSM 7.0

    Usage Report for SSM 7.0 We need to track the usage of SSM by our users and report the number of logins. I believe there is a trace file that is produced somewhere in SSM. Can anyone suggest the best method to produce a 'Usage Report' based on a trac

  • Update number of reading with shared library

    Hey, I use to listen my music present on my MacBook with my iPad using home-sharing. But when I play a song on my iPad that did not increase the number of reading on my Macbook. I have turn on the option in itunes preferences to allow this but withou

  • Siri shortcut doesn't work

    When I hold home button Siri shows but does not answer. I have the shut down and restart phone for it to work. Sometime later it stops

  • Update new iPhone

    Just bought new iPhone and want to copy all my old apps, pics etc from iCloud to new phone How do I get the phone to the beginning of the start up process? The cellular line is already connected

  • Please help: variable headings problem

    hello, trying to get my headings on each page of my rpt, to change if it is a new location, new company, etc. when put in WORD header/footer, it does not alter, it stays with first value from my XML. When try put in for each block, only prints when n