Bios flashed, rma, windows still wont load

Evening,
I flashed with live update (yes i know now..) and it went wrong. Board, P55-cd53, sent to MSI who reprogrammed it. Unfortunately windows wouldnt load. I think i have tried every described method posted here, even flashed back to the old version, to no avail. I even tried a boot dvd with ubuntu but even that OS wont run (either with or without installation). The pc simply reboots when trying to execute these commands.
If i were to replace any hardware: what would it be?
System specs
P55-CD53
intel i5 750
ocz-gold-low-voltage-ocz3g1333lv4gk
Msi hawk 5770
Samsung spinpoint f3 500gb
Cooler master real power M520
Thanks,
Harry

Quote from: Svet on 10-October-10, 16:16:23
Before this bios flash it was worked fine?
I was having regular BSOD, especially when leaving the pc on overnight. Other than that everything worked fine.
Quote
Do >>Clear CMOS Guide<< with power cord removed.
Then Load BIOS Defaults
I did this before sending it back to MSI. I haven't done this after i received the mb back from MSI. Will try today.
Quote
Check memory voltage in BIOS setup, you may need to apply voltage recommended by your memory vendor for your sticks
Also do check with >>Memtest86<<
Memtest came with the Ubuntu-disc. I ran it and the Memtest results were shocking. I only did 5 runs but received thousands of failures.
I will replace the OCZ rightaway instead of finetuning them in BIOS.
Also adressed to Jack: Would the G-skill F3-12800CL9D-4GBNQ be a good choice? Right out of the box without adjusting anything inside BIOS?
Quote
Else reinstall OS
So far i haven't been able to reinstall or repair (from disc and usb) my windows 7 at all, not even Ubuntu.
System just keeps telling me 'the ntoskrnl is missing or corrupt' and keeps doing restart loops.
Would replacing the DRAM solve my problems likely or would it cost me a new MB or HDD too (if al else fails)?
Thanks,
Harry

Similar Messages

Java was blocked due to the threat I have followed the update & other options to reenable it ie.manual updates reinstalls yet websites like YouTube still wont load up.Works fine in Chrome & IE!

Java was blocked due to the threat I have followed the update & other options to reenable it ie.manual updates reinstalls yet websites like YouTube still wont load up.Works fine in Chrome & IE!

Your plugins list in "more system details" shows Next Generation Java Plug-in 1.6.0_31 for Mozilla browsers so Java should not be blocked.
Could you post a link to a webpage where Java isn't working for you? YouTube uses Flash, not Java. Here is a list of Java test pages you can try, to confirm that Java is working, from http://kb.mozillazine.org/Java#Testing_Java
* [http://www.java.com/en/download/help/testvm.jsp Test your Java Virtual Machine (JVM)] at java.com.
* [http://browserspy.dk/java.php Java Information - BrowserSpy.dk]
* [http://javatester.org/ Java Tester] - The test pages at javatester.org will tell you if your web browser is enabled for Java and, if so, the Java version.
* [http://www.pinlady.net/PluginDetect/Java/ Java Plugin Detector]
By the way, I see in your plugins list that you also have the VLC media player Web Plugin 2.0.0 so, it's possible that the VLC plugin is causing a conflict if YouTube or other videos don't work. See [[Video or audio does not play]] (you may need to disable the VLC Media Player plugin in the Add-ons -> Plugins list for some media to play).

When I try to Home-Share It works most of the time. It will always show up, but sometimes I tap on the icon of my library then it wont load, I restart my computer, IOS Divice and my router It still wont load my Library .... WHY!

When I try to Home-Share It works most of the time. It will always show up, but sometimes I tap on the icon of my library then it wont load, I restart my computer, IOS Divice and my router It still wont load my library. I even went and tried to reinstall Itunes and everything nothing works.

Hi,
/Users/sarahschadek/Desktop/Safari.app/Contents/MacOS/Safari
Move the Safari app from the Desktop to the Applications folder.
Restart your Mac.
That's why you see this:
When I try to do the updates my computer says it has ready it goes through like it is downloading them then at the end it says some of the files could not be saved to "/" files.
After your restart your Mac, click the Apple  menu (top left in your screen) then click: Software Update ...
Carolyn

Flashed new bios V1.10 , now Pc wont load past windows loading sceen.HELP

hi i have a neo-f p965, i flashed the bios today to the new update v.1.10. now my pc wont load past the windows loading screen, it just reboots every time.
i want to go back to a older bios version if posible. can anybody help me, this is a disaster if i cannot get it to work.
many thanks
Noel.

Get this.
Select your motherboard. Then click BIOS, download previous version.
Rest is simple.
Or you can stick with the 1.1 BIOS and reinstall Windows.

Flash video/audio player wont load in htm page

Hi everyone,
Im trying to use that neat new option in flash 8, import
video/audio, im trying to add a player to this page but the player
just wont load, i know the files and folders are in the correct
place, im confused, can anyone help me understand why its not
showing.
it shows when i test view from my PC, but uploaded to my
server the page doesnt work?
I never have problems with flash normally.
many thanks
Tobes

thanks man, ive fixed it now thats why you can see them,
really apreciate you having a look tho, thats our new compilation
CD coming out soon.
if anyone is intersted, the problem was a mime setting on
windows server 2003, you need to add a new MIME type in the IIS.
Cheers

Flash banner on website wont load until browser is refreshed??

I am having this problem on a website where the flash banners for each page wont load in any browser until you either refresh F5 the page or try re-clicking the page nav links a few times. Once loaded they are fine, but if browser's cache is cleared, no go. http://udornthara.com
Some research suggested "Usually this happens if there are a lot of linkaged objects in the library with 'Export in first frame' option enabled. If this is the case, please disable this option. The problem is not in the quantity of the linkaged movieclips with 'Export in first frame' option enabled, the problem is the size of the objects which are linkaged."
I have de-compiled the SWF and checked out the library, but really have no idea in regards to Flash files and their construction as to what is or isn't an issue.
If anyone has any information on this problem, advice, or steps to take, would be much appreciated.
The file has 4 images, 8 shapes, 7 frames (of which 0-6 are 'loading...') and 5 scripts.
Many Thanks...

// Action script...
// [Action in Frame 3]
bar._xscale = 1;
// [Action in Frame 5]
bar._xscale = 100 / getBytesTotal() * getBytesLoaded();
_root.display = math.floor(100 / getBytesTotal() * getBytesLoaded());
if (_framesloaded == _totalframes)
    play ();
else
    setProperty("", _currentframe, --_currentframe);
    setProperty("", _currentframe, _currentframe);
    setProperty("", _currentframe, --_currentframe);
    gotoAndPlay(_currentframe);
} // end else if
// [Action in Frame 6]
gotoAndPlay(7);
// [Action in Frame 7]
stop ();

Still wont load after buying firewire

My 60gig ipod still wont mount the ipod software after buying and installing the firewire card. No clue what to do now.

Have you run the iPod software updater to restore your iPod?
Restore the iPod

Windows ME wont load

After installing a new Seagate 40GB drive and formatting etc and transferring the old system from my old drive to the new one, WInmE wont load error message NTKERN failure???

Give complete PC specs. includding P.S. brand and AMPS. it gives to 3.3v. 5v. and 12v.

K8N Neo4 Bios Flash to 1.8 Wont Boot Past Windows XP Loading

I just flashed my bios to version 1.8....i cant it to post past the windows xp boot screen.....anyone know why and what i can do??!!?!
Everything was fine before running 1.5....

Quote from: sixth on 03-September-05, 08:26:28
I just flashed my bios to version 1.8....i cant it to post past the windows xp boot screen.....anyone know why and what i can do??!!?!
Everything was fine before running 1.5....
I read a thread somewhere in this forum saying 1.8 is good if you have Sempron (E6?). If by some reason you have to flash 1.8, search for User syar2003's post. I followed his procedures and I flashed 1.6 successfully. Bios 1.5 gave me a lot of troubles.

So why wont my bios flash allow windows to start (raid 0 array).

Hi .. I have been running 1.36 beta bios ever since I had this board (K8N Neo2 plat), but have had the odd problem once in a while, after trying various things, I thought I would flash the bios to the newest official version ... but heres the problem.
It boots, gives me a "healthy" report on the raid array .. but right where the windows boot screen should appear it just stays black.
So I try safe mode .. it loads all the text then hangs.
I tried rebuilding the array, but no go .. still the same result ... flash back to 1.36b and windows loads fine
Bios was put back to defualt settings before the flash .. so I am a bit confused as to why I am having this issue, can anyone help ?

My fault Syar2003
I was looking at the scsci bit .. not the sata bit under ide controlers ... 1.4bios on and windows loaded (after a few secs blank screen when i went nooooooooooooo !!)
Great stuff thanks for all your help
Odd that installing the 5.1 drivers doesn't do these too ... but thats nvidia for ya I guess

P67a-GD65/BIOS 1.7 Windows is good loading only after reboot

Hi, I have a trouble with a P67a-GD65(BIOS 1.7)
When I start PC (With Keyboard Razer tarantula plugged) motherboard have this signal: http://rghost.ru/4210405
Without keyboard: http://rghost.ru/4210504
Maybe this is normally signals, but:
When I turn off my pc at night, windows dont loading with the first time
After POST I have black screen with blinking underscore - after reboot, windows loading is good. The same way is good loading, when I reboot PC from Windows, or turn off my pc for 10 minutes and turn on.
In first time Windows loading is normally, but after log in screen i had windows message about new SATA device and searching drivers for it, then BSOD: Quote
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED 0x1000007e
Dumps - http://rghost.ru/4210562
In BIOS SATA mode is IDE
HDD without BAD sectors
Configuration:
Quote
Operating System Microsoft Windows 7 Ultimate 6.1.7600 (Win7 RTM)
Computer Type ACPI x64-based PC
  Motherboard:
   CPU Type QuadCore Intel Core i7 2600, 3500 MHz (35 x 100)
   Motherboard Chipset Intel Cougar Point P67, Intel Sandy Bridge
   System Memory 4080 MB (DDR3-1333 DDR3 SDRAM)
   DIMM1: Kingston 9905403-171.A00LF 2 GB DDR3-1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz)
   DIMM3: Kingston 9905403-171.A00LF 2 GB DDR3-1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz)
   Video Adapter NVIDIA GeForce GTX 460 (1024 MB)
   Disk Drive ST3160815AS ATA Device (160 GB, 7200 RPM, SATA-II)
   Disk Drive ST3400632NS ATA Device (400 GB, 7200 RPM, SATA)
Code: [Select]
Sorry for my english, and please help

All time i use only white sata ports for HDD and 1 black for CDROM
Some screens:
Im try for disable EUP 2013 in BIOS Results will be tommorow
Quote
see if that cures it
Now I dont get this message in windows (it was at the first time, as far as I can remember windows had loading without reboots)

Green and Orange Flashing lights - ipod still wont work after Reset Utility

I bought my daughter an ipod shuffle 1st gen last year. It stopped working, did everything I was suppose to do, sent it back to Apple, they sent me a new one. Now the stupid thing is flashing green and orange lights at me! I've tried restoring it with Reset Utility, but they are still blinking at me. This is supposed to be a newly refurbished ipod, I only recieved it today, so by rights it should be working...am I doing something wrong? It is charging, it is recognised in my computer but not in itunes. What is going on? Can anybody help...this is so frustrating.
Windows XP Pro
Windows XP Pro

I bought my daughter an ipod shuffle 1st gen last
year. It stopped working, did everything I was
suppose to do, sent it back to Apple, they sent me a
new one. Now the stupid thing is flashing green and
orange lights at me! I've tried restoring it with
Reset Utility, but they are still blinking at me.
This is supposed to be a newly refurbished ipod, I
only recieved it today, so by rights it should be
working...am I doing something wrong? It is
charging, it is recognised in my computer but not in
itunes. What is going on? Can anybody help...this is
so frustrating.
Hold on... Alternating green and orange for 2 seconds means there's no playable music on it. Alternating green and TWO orange for 10 seconds means that it has to be restored. WHICH light pattern are you referring to?
What do you mean it's not recognised in iTunes? Does it NOT show up in the left most (Sources) panel?

Flash plays in Chrome, wont load in IE, like its not even on page. Code inside please help a newb..

Here is the code, flash plays fine in chrome even after publishing and making live on web. But anyone with IE gets all my page but no flash menus or anything. Have not tried FF. Please help Im going nuts on this one. Im using Visual Studio 2010 RC. This is my first attempt and page is great in chrome.
<%@ master language="C#" autoeventwireup="true" inherits="MasterPage, App_Web_zu1uh2td" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title>dreamtemplates</title>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1251" />
<link href="style.css" rel="stylesheet" type="text/css" />
<script src="Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
<script type="text/javascript">
    AC_FL_RunContent('codebase', 'http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0', 'width', '780', 'height', '327', 'src', '3439', 'quality', 'high', 'pluginspage', 'http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash', 'movie', '3439'); //end AC code
</script><noscript><object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0" width="780" height="327">
<param name="movie" value="3439.swf" />
<param name="quality" value="high" />
<embed src="3439.swf" quality="high" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" width="780" height="327"></embed>
</object>
</noscript>
    <asp:ContentPlaceHolder id="head" runat="server">
    </asp:ContentPlaceHolder>
</head>
    <body bgcolor="#FFFFFF" leftmargin="0" topmargin="0" marginwidth="0" marginheight="0">
    <form id="form1" runat="server">
    <div>
        <asp:ContentPlaceHolder id="ContentPlaceHolder1" runat="server">
        </asp:ContentPlaceHolder>
    </div>
    </form>
    <table width="780" border="0" cellspacing="0" cellpadding="10">
<tr>
    <td align="center" bgcolor="#181818">Copyright © Company name. 2008 | <a href="#" class="orange-text-regular">privacy policy</a></td>
</tr>
</table>
</body>
</html>

Hiya, Mike,
It's pretty tough to work through pasted-in code. If you can, please upload a page to a server, so we can see your pages in context. We'll be able to download it and look at it.
That said, you can do this: Find the beginning of an editable region in Code View. It will look like this:

Click anywhere in that tag, between the opening bracket and the closing bracket.
Then, on the vertical toolbar on the left side of the Code window, click on the "Collapse Full Tag" button. It is the one with two arrows pointing at each other. This will collapse that entire editable region. Then click the button with the two arrows pointing away from each other. That will re-open the editable region, but will highlight it.
If you have nested regions, you will find the other inside one of the editable regions. If you copy the <!-- InstanceBeginEditable and do a search on it in that document, you will find the nested region.
Beth

Authorware on Windows 7 wont load

Hello, im using Windows 7 Home version, when i go to play an Authorware Website it shows me an "error loading", i have tried in IE 8; Firefox, Google Chrome and Netscape, all give the same error.
I have run IE8 as Administrator and added the website to trusted websites, didnt work also.
That site works in Windows XP fine!
Screenshot:

Here's what I do when looking through trace files:
Every instance of SHOCKTRACE BEGIN is a new session the user launched. The ptrace file keeps building as long as the shktrace.on is present.
There are 7 lines of PluginMgr::Init, the version of Web player should be 2004.0.0.0 The rest of those 7 is more informational.
A few lines down from there is the location of the aam file... verify that's correct.
In places where the end of the line lists sts it should be 0. Anything other than 0 is an error of some kind.
Read through the lines where the map file is parsed... check the version number in the map, check that all the lines got through, check that the correct PLR line is present. If a PLR line is not present then it defaults to the full player downloaded from download.macromedia.com
Check the line for BypassSecurityDialog... if it's set to true then you won't see the dialog and you won't have the opportunity to set the file as trusting and it won't download files.
Look for SecurityMgr::SetSecurityMode to see that it's TRUSTING
After the processing of the map is a similar routine with the manifest. Then the processing of each of the file downloads. Each of those is the same starting with opening the url, followed by one or more writes to the disk and ending with a destroy stream. Downloading does two at a time. Since you see an error in launching the webplr.exe I'd search for all the lines with that text and make sure the file is being downloaded. If it is being donwloaded and it won't launch then double check the setting of the trusted site in IE. If it's set correctly then it should automatically turn off protected mode in the browser. If it's not being downloaded then perhaps you don't have write permission to the destination folder (I doubt that's the case unless your on a corporate machine with tight user priveleges).
Hope this gets you going in the right direction. Please report back on how things go.
Mike

TS1702 WHY EVERYTIME APPLE PUTS OUT A NEW VERSION OF IBOOKS DOES IT CRASH HAPPENED LAST TIME AND NOW WITH V6 i HAVE DONE EVERYTHING IN THE TROUBLE SHOOTING GUIDE LIKE SIX TIMES AND IT STILL WONT LOAD MY BLOODY BOOKS

Why does ibooks crash everytime there is an update? I am so sick to death of having to stuff around and do all the trouble shooting rubbish to try and get ibooks working again, everytime there is an up date. I have wiped restored re synced changed usb leads turned my computer off unplugged and replugged every bloody thing about a dozen times and still after a week, instead of reading my books I have a very expensive paperweight. What is the problem and why does this keep happening with every new update. I am so frustrated and annoyed that I can't just read my book, it is why I bought the **** thing. Anybody got any other ideas before I go insane?

Dude thank-you for your wonder detailed knowldge, I have descovered that lets say xp 1700 in a ultra 2 can only handle at the most 143fsb mult at 12.
Given the settings" irq's are a major",part of directing traffic and power? example:
Sound blaster Live , uses two irq's most common at"Auto" is, irq 10, or 5, and Sound blaster 16 emulation usually takes irq 5,. I have found that the sound card in slot3 works great , but to do this I had to change the Bio's and assign slot 3 irq 7 . and make sure printer port has share irq enabled
Problems that accure with bad traffic are like this. Start a dedicated server. minimize than start your game?":censored: no sound what could be wrong"? Shoot another problem Connection problem?. The computer nerd is getting trouble over the ordeal. ANSWER! IRQ can fix the problem, Study the irq and make changes as you go. "what would it be like with no stop signs,,,that is the same as a irq. with the same knowldge this topic brings IRQ need to be clearly understood.
I can honestly say my system is error free and running like a dream.
xp 2500 barton 333
creative sound 5.1gamers.
512 mb kingston ram 400 mhz
boadband either onboard.
MSI 5700 128 mb ddr
Setting are:
163 fsb
mult of 11
ddr 333
video memory clock down to 450mhz
3d clock to 390mhz
The delta is a smooth running board also I want to mention to the person with crackling sounds, change the irq like I did, that fix the problem and the power is totaly too good to be true.

Bios flashed, rma, windows still wont load

Similar Messages

Maybe you are looking for