Bios for K7n2 delta 2 LSR (2800+ Mobile Barton Recognizing)

Hi, i need the BIOS for the Bios for MSI K7n2 delta 2 LSR Motherboard, because i have a Mobile Barton 2800+ CPU with FSB 266 and it isn't recognized correct, i would like to set the Multiplier to 16, the highest setting is 13 - but at 13 my system didnt boot anymore. I tried the B72 Bios, but it didn't help. Thanks

What's that? You already asked for that in another thread (https://forum-en.msi.com/index.php?topic=123557.msg932826#msg932826). Please don't open various threads for the same issue.
I already said in the other thread you can't set 16 manually. Set it to auto.

Similar Messages

New Modded BIOS for K7N2 Delta ILSR

MSI K7N2 Delta ILSR Modded BIOS based on Official v. 7.80 BIOS
download here:

Description: Access through interface which is on insecure interfaces list detected. Request aborted.
Interface/Client IP address:
Date: Wed, 18 May 2005 13:11:17 GMT
Doesn't work for me
By the way did u put the bios to vork with 1.3 vcore like the braziliantech one that does't exist anymore ?
EDIT: Thanks it's working now

7.5 and 5.5 BIOS for K7N2 DELTA released

Just enter this link:
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=436

Extended test ended up going back to 193x11.5 (2222)
Crashed in looping of demo 3Dmark2001SE after 45 mins.
Noticed my Nostromo game pad not being reconized , lights stayed on(not good)USB
Backed up fsb a couple notches to stable again. All is good
passing all extended test.
gained 1 fsb from 192 to 193. I'll still take it.
keeping low Volts
CPU 1.7
Dram 2.6
Aggressive memory timings 2-2-2-6
Sis Sandra still showing above stock 3200 400fsb speeds in benches
Memory Bandwidth 2913
2733
Arithmetic 8125
Temps:
System 33C
CPU 36C
Power 35C ( all after benching)

Jumper Settings for K7N2 Delta LISR and Athlon 3200 FSB400

Hello Everyone,
(I think I sent this to Raven By E-Mail but I'm not sure, I'm still new to this)
Having problems understanding jumper settings.
I cheched out the forum and the motherboard users guide to see which way the jumpers are set for my Board K7N2 LISR + Athlon 3200+ 400FSB.
In the user guide it say's:-
FSB Mode Jumper: J10
This jumper allows you to set the CPU FSB mode, (It then shows two diagrams of Jumper 10) - first with pins 1 and 2 jumpered "user mode default 133Mhz" and the secound shows pins 2 and 3 jumpered "safe mode 100Mhz".
What has settings 133Mhz or 100Mhz got to do with a 400 FSB??????
CPU FSB Frequency Jumper: J11
This jumper is used to specify the CPU FSB frequency. (again it shows two Diagrams) first: Leave the jumper short connected if a 133/166Mhz FSB is installed.
Secound:If the CPU supports 100Mhz FSB, leave the jumper open connected.
To use a 200Mhz FSB CPU, set the jumper short connected and enter BIOS setup Utility to adjust the CPU FSB Clock Frequency.
Again what has 133/166Mhz or 100Mhz got to do with a 400 FSB???????
For my K7N2 Delta LISR and Athlon Barton 3200+ 400 FSB, what Would I set J10 to:- (Jumpered Pins 1 and 2,= 133Mhz) or (Jumpered 2 and 3,= 100Mhz).
Also what would I set J11 to:- (Jumper pins Open = 100Mhz) or (Jumper short 133/166Mhz). Hope someone can help!!!!!!!!!
It would be nice if the User's Guide had a (If .... Then..... in it)
If CPU = Athlon 2800+ 333 FSB, Then J10 is jumpered pins 1 and 2,
If CPU = Athlon.... etc etc.... or even a couple of examples
Sorry this is so long, but I just need to tell someone, Thanks.

1 insafe mode it will boot at 100 fsb regardless of what you set in the bios
in user it will boot by what it sees the cpu as or what you set it to in the bios
just leave it in user
if you o/c and it will not boot shut down put it in safe
then lower the o/c once it boots
again shut down and put it back in user
2 just leave it shorted
only alter it if you used a 100 fsb cpu

FOR K7N2 DELTA-L USERS: Mouse Hang At Win Startup? Check It Out!!

!!!FOR K7N2 DELTA-L USERS!!!!!
I had this same problem but i think i found solution. STEP 1 plug mouse to ps2 keyboard port and vice versa, if that will not help ... STEP 2 in bios set BOOT UP NUM LOCK LED to off and GATE A20 OPTION to normal that should help!!! it REALY solved my problem!!

Making a copy to Good Articles...

My KingMax SuperRam can't run Dual Channel for K7N2-delta

My KingMax SuperRam can't run Dual Channel for K7N2-delta
why??

How many sticks do you have?
Please post complete systems specs in your signature.

3.3 bios for k7n2 ILSR Delta

Hi I am looking for the 3.3 bios and I cant seem to find it anywhere, anyone know of any links that I can use to find it?

The bios numbers for the K7N2 Delta ILSR start at 7.1 to 7.6 so don't know what mean by 3.3.
http://www.msicomputer.com/support/bios_result.asp

K7N2 Delta LSR+Mobile 2600

I can`t seting the BIOS for the cpu MOBILE 2600. The mainboard don´t show the real speed.
How i can set?
i upgrade the BIOS, but just show 1000Mhz..
Sorry for my english!!
can you help me??

https://forum-en.msi.com/index.php?threadid=31708&sid=&hilight=WHAT+TO+DO+IF+IT+ALL+GOES+WRONG&hilightuser=134
https://forum-en.msi.com/index.php?topic=64248.0
It will be at 100 fsb now
so 10x 100 =1000 mhz
if you have the right ram then 10x 200 should be easy
just up the fsb
if it dont book read second link

Need help with jumper settings for k7n2 delta ilsr

I have a k7n2 delta ilsr and I'm using a AMD 2800+ barton 333 fsb. I'm not sure what the jumper settins are for this cpu. The users guide only shows 133/166 and 200, can anyone help me with the jumper settings.
Thanks, Ron.

Hi,
As your processor is 333FSB - the jumper should be set to 166FSB as should the BIOS. As your RAM CPU combination runs at 2x166=333 or thereabouts.
Basically, as a general rule, if you halve the FSB speed of your processor you'll get the setting for both BIOS and Jumper. 200FSB=100, 266FSB=133, 333FSB=166 etc. etc.
Axel

Temperature reading for K7N2 Delta ILSR

I have a 2500+ Barton (333 FSB) to work with K7N2 Delta ILSR and 2x256 MB Samsung DDRAM(400 FSB).I use MBM to read my CPU temperatures.Usually 45-47 C idle and 54-58 C under full load.I overclock CPU to 400 FSB and I get LOWER TEMPERATURES!!!!!
I use 1:1 bios setting for CPU and DRAM speeds either 333 or 400 FSB.
How can this by possible?

I use Speedfan which seems to follow the temp in the bios. I've heard that MBM is also accurate. As far as your temps going down on a OC that is very odd indeed.

[nForce] K7N2 Delta@ LSR stability problem

Okay gang...here's the scoop. Recently purchased the K7N2 Delta2 LSR and equipped it with an AMD XP-2600 (locked), 2X512 Rosewill Dual-Channel sticks, plus Samsung 80gb HDD and ATI Radeon 9000pro AGP. Built the system with no hassle and clean installed Win XP Home. Just wanted to get the system up, so left BIOS setting where they were for a couple of days. Noticed that the processor was not being recognized, so checked the BIOS and realized FSB was set to 133 (processor at ~1500mhz). I changed the FSB to 166 with multiplier of 11.5 (which, I believe is correct for my 2600 Barton). Voltage is at 1.65v. Memory is at DIMM slots 1 & 3 (dual channel) and memory voltage is at 2.7v. (Timings at 2.5,3,3,7) After I made these changes to the BIOS and rebooted, Win XP ran checkdisk, and reported no errors. The problem now, is that graphics-intensive stuff (i.e., games) cause system to freeze after about five seconds. When the processor was underclocked, I didn't have this problem. I'm not interested in over-clocking... just want it to be stable at stock speeds. Other applications (Word, Excel, IE, Outlook Express) run fine. My ATI Radeon 9000pro is a 4X AGP card (I have 8X disabled in BIOS), and the voltage is at 1.5v. I don't think this is a PSU problem (400w), and only noticed the problems since changing the FSB to where it was supposed to have been all along. Am I missing something obvious?

Board runs best with fsb:dram at 1:1 Not sure what speed memory you have but needs to run at same speed as fsb, ie 166 Mhz =333 ddr.
I found bios b3 to work best for me. Give that a go.
Give make/model of psu with max amps to +3.3v, +5v and +12v. See my signature for example.
I found that with other bios I need high performance setting in cell menu at optimised, so check that.
Search on this forum for my username and keyword 'bios' for lots of other posts.
Good luck

K7n2 delta lsr + 3000XP prob

i just bought:
msi kt7n2 delta lsr
512 pc2900
3000XP
450w power supply
winXP
i cannot run the processr at 166mhz otherwise windows either brings up the error send report where it closses the application OR windows just restarts without warning.
my brother just bought the same set up aswell (he had his for crimbo) and hes got the same prob, except when he turns the speed to 166mhz, when windows goes to start he gets a BSOD, so i figure no biggy, just repair windows, as i go to do this before the installation or any questons are asked, he gets yet another BSOD and this happens everytime.
ive been ****ing round with bios options for a while but i aint very good at that ****.
and im running a ti4800 nVidia
i dont know wether to upgrade the bios because
A: i have never upgraded a bios before
and
B: if i were to take the board back hed probaly blame it on me for pratting around with it
so, what you guys reckon, i noticed in one of the topics that 400mhz ram would be needed for a 3000XP upgrade ?

The problems your having can be caused by power supply, memory compatiblitly and a few outer things.
List your power supply amps for 3.3 volt, 5 volt and 12 volt.
The ram is PC2700 it is 333 FSB ram your processor is a 400 FSB processor.
So you have created one problem there. Try running ram as single channel to see if it helps with stablity. Set ram speed to 333 FSB.
Or better yet buy some ram that is on the list of compatible ram 2-256 of PC3200 DDR is plenty of ram for games and programs and will keep price down.
Memory that is matched for Dual Channel will also help.
The newest Bios for the K7N2 Delta ILSR is 7.6 it may help with some ram problems but will not fix the FSB difference.

Another help request for K7N2-delta

I was trying to overclock my memory and when my system rebooted after saving my settings in the bios, I just get a black screen. On the D-bracket, the top two are red and hangs there, which, according to the manual, means that either my processor is damaged or not installed properly.
I tried rebooting in safe mode by changing my J10 jumper and clearing the cmos but to no avail. Could I have damaged my CPU just by changing a setting?
Specs:
CPU: AMD Athlon Barton 2500+
Motherboard: K7N2 Delta-ILSR
Video card: Saphire Radeon 9600 Pro 256 mb AGP
RAM: Corsair Value Select, PC2700, 256mb, 512 mb, and 1 gb of RAM.
Hard drive 1 & 2: Seagate, 120gb, ATA100
Hard drive 3: Western Digital, 500gb, ATA100
Windows XP SP2
Powersupply: Antec TruePower, 430w (3.3v/28a, 5v/36a, 12v/20a)

Quote from: Stu on 18-February-08, 02:21:22
Guys, the Insert key reset was for the K7N2-Delta2 series, which didn't have the safemode FSB jumper, it does not apply to the K7N2 Delta
You're asking for trouble by a) using cheap value-branded RAM, and b) mixing sticks of different sizes
Also you always get best results by running memory clock at same speed as CPU FSB clock.
Take out all the sticks of RAM and have just one installed, then see if it will start up again
I read a review of how well this memory overclocks, so I thought I'd give it a shot. Also, the value-brand for Corsair is rated just under their XMS series; it's solid as far as I can tell.
Anywho, I've always had the 256mb one in the slot ever since the incident anyways. Thanks for the warning, I never knew mixing different sizes had negative effects.
Quote from: Maxwell Smart on 18-February-08, 02:18:35
I own this board... it's not the insert key, but rather the delete key... so yes, as soon as your pc boots up, hit the delete key repeatedly (or hold it down) and then it will let you go into the BIOS.
I'll try that once I get home. Thanks for the info!
Quote from: HenryW on 18-February-08, 03:01:23
"I was trying to overclock my memory..."
There is a miss-print in your manual for the CPU D-LED, I had the same in my K7N2G-ILSR manual.
So it's stuck at the hard drive or at the system power on? I'm assuming the latter since my hard drive shouldn't be having any problems.
Yea, I don't know what I was thinking when I decided to try this. This is what I get for it, I guess.

AGP Setup For k7n2 delta ilsr

I have a k7n2 delta ilsr mb, in display properties on desk top setting tab then advanced button then GeForce tab under adapter information is Bus and memory. To the right of Bus it reads AGP (PCI mode) shouldn't that read AGP (8X), how can I change this. Ron.

Hi,
No, leave it at 64 or 128.
Go here for an explanation:
http://www.rojakpot.com/default.aspx?location=7&var1=18
Then - Click on: "Free Access To the BIOS Optimization Guide" near the bottom of the page - then click on "AGP Aperture Size"
Axel

New bioses for K7N2, Delta & K7N2G released-Updated

MSI has posted new bioses for the K7N2, Delta and K7N2G series mainly adding Sempron support for these boards as follows:-
K7N2G-ILSR bios version 2.0
K7N2 Delta-ILSR & L bios versions 7.8 & 5.8
K7N2 & K7N2G-L bios version 4.1
K7N2GM-L bios version 1.6
MS-6729 bios version 5.4

Quote
Originally posted by Raven
a athlon xp is rated up to 85 celsis and if its from April 2004 it should be quite correct.
carefully touch the heatsink to check if its warm or not
also what is your other temps ?
what program do you use to check temp ?
pc alert4 is known to show wrong from time to time.
i use speedfan and it works god form e.
http://www.almico.com
but the higher the temp the sooner it will fail.
55-60 is what most people recommend as maximum temp under load.
I know its rated up to 85C but won't it start being unstable around 75C?
I use SpeedFan, MBM5 to check temps. Not sure about the case temp but the socket temp is like 28-35C I believe.

Bios for K7n2 delta 2 LSR (2800+ Mobile Barton Recognizing)

Similar Messages

Maybe you are looking for