Bios halt code 65910513

my wife forgot her bios password, and she can not remember the password
so she need to have her laptop bios password unlocked
Here the Bios Halt Code: 65910513
This question was solved.
View Solution.

Hi,
Enter: 70678535
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

BIOs Halt code

I am trying to get into my BIOs and dont remember the password since its been about 2years since I've look through the manuel and I am receiving the Halt code 95402496.
This question was solved.
View Solution.

Hi,
Enter: 20560418
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

GT70-0NC BIOS halt code?

Occasionally my GT70-0NC will halt at the BIOS boot screen.It displays '99' in the lower right corner,I assume that is a code for why it halted? A re-start always cures this,I was just curious if anyone has a list of these codes.
Also,I tend to use my machine as a base unit,that is it has a monitor,mouse,keyboard,joystick and at least 1 external drive always connected.I also connect my tablet at times. Is this ok to do this,can it handle all these extra devices ok?

Quote from: Lister of Smeg on 12-January-15, 18:53:20
I'm pretty sure it's on the latest BIOS. I did think about unplugging everything but as it only happens infrequently it may take ages to verify. Also,sometimes the external keyboard won't work. Once again a re-boot cures the problem. This is my second MSI gaming notebook,my first died under warranty and that also had the annoying habit of hanging on boot-up,although that one never even made it to the BIOS screen. I'm going back to a desktop this year and this will be relegated to light duties.
I did search for those codes but only found ones for mainboards.I'll have a another look.Thanks for your help
Looks like it is the USB causes the trouble. Try not to connect any devices via your USB ports during POST.

Need bios pwd reset for pavilion 15-n013dx win8 halt-code 65925557

need bios pwd reset for pavilion 15-n013dx win8 serl# [Edited for Personal Information] halt-code 65925557
An aquaintance used the laptop and set the bios password. I see you have a way to run the halt-code towards an access-code. It's an allmost new PC and I would rather not take it apart looking for the reset pins.
This question was solved.
View Solution.

Nfd try.
70683599
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Halt code recovery - lost bios password

Hi;
I lost the bios password for my Pavillion G6 and it gives me a halt code of 54235907... any ideas
Thanks
Heiko

Try>> 41193329
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Bios Password for Pavilion G6-Halt code 87057274

Help!

Hi, See your earlier post on the link below. http://h30434.www3.hp.com/t5/Notebook-Recovery/Halt-code-77749538/m-p/4178402/highlight/false#M55511 DP-K

Halt code 93296280

Hi: Please read this post which should resolve your dilemma. http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Sof... Then... You can: 1. Use the unlock code you generated to enter the BIOS
2. Disable all passwords that are enabled in the BIOS's security menu.
3. If asked for current password - type the unlock code
4. For new password, just press ENTER key
5. Repeat the same for verify password column.

receive halt code on 93296280 startup

Halt code 77749538

bios password g6 pavilion halt code:77749538
This question was solved.
View Solution.

Hi,
Enter: 68621518
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Mini 110 bios pasword problem Can you give me a Bios unlock code for CNU9443DVL

Can you give me a Bios unlock code for CNU9443DVL
Tnank you in advace
Branko
This question was solved.
View Solution.

Welcome App. Try.
e 9 l o v v f t 6 k
Third letter lowercase L.
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Info on Bios beep codes..sticky maybe

AMI Beep Codes
Except for beep code #8, these codes are always fatal.
1 beep Refresh failure
- try reseating the memory, if the error still occurs, replace the memory
2 beeps Parity error
- try reseating the memory, if the error still occurs, replace the memory
3 beeps Base 64K memory failure
- try reseating the memory, if the error still occurs, replace the memory
4 beeps Timer not operational, system board bad
5 beeps Processor error, system board bad
6 beeps 8042 - gate A20 failure, try reseating the keyboard controller chip
7 beeps Processor exception interrupt error, system board bad
8 beeps Display memory video card read/write failure error, replace video memory or
video card
9 beeps ROM checksum error, faulty BIOS chip(s), must replace them
10 beeps CMOS shutdown register read/write error, system board bad
11 beeps Cache memory bad
Award BIOS Beep codes
One Long and Two Short Beeps Video Error
Two Short Beeps Any Non-Fatal Error
One Short Beep No Error During Post
Phoenix BIOS Beep codes
These codes are presented in sets of beeps, for instance 1-2-2-3 means one beep
followed by 2 beeps then 2 more beeps then 3 beeps
* 1-2-2-3 BIOS ROM checksum
* 1-3-1-1 Test DRAM refresh
* 1-3-1-3 Test 8742 Keyboard Controller
* 1-3-4-1 RAM failure on address line xxxx
* 1-3-4-3 RAM failure on data bits xxx of low byte of memory
* 1-4-1-1 RAM failure on data bits xxxx of high byte of memory bus
* 2-1-2-3 Check ROM copyright notice
* 2-1-3-1 Test for unexpected interrupts
* 1-2 .......Search for option ROMs
* 1 ...........One short beep before boot, normal

http://bioscentral.com/beepcodes/awardbeep.htm
has a bit more re award ones

I need to unlock compaq mini cq10 bios password code is CNU027599F, please help

i need to unlock compaq mini cq10 bios password code is CNU027599F, please help

Ash.
Check your other post.
REO
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Hp mini 1000 bios error code CNU9162V02

my sister gave me a hp mini 1000 but it has a bios password and we do not know what the password is,the bios error code is CNU9162V02 ive searched high and low for a solution, can ANYONE please, if you know the correct code for this error, pllleeease.....help me....thanking you wonderful folks in advance!
This question was solved.
View Solution.

Steve try.
e9lo3g7617
3rd letter lowercase L.
4th letter lowercase O.
9th is number 1.
Use that code to go into the BIOS.
Disable all passwords that are enabled.
If asked for the CURRENT password use that code.
If asked for NEW password just hit enter.
If asked to VERIFY password just hit enter.
Save and exit.
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

BIOS halt not found Pavilion 7580

After attempting to use my HP Recovery disks, it was reported that files could not be copied when recovering XP. I386 files or something to that effect. When I DL PC Doctor & attempted to run it, I received 2 windows that showed AX,BX,CX,DX Patterns & under that was CPU Number 2 (Apic ID 01H) in the first window then in the second window below it for CPU Registers................. & BIOS halt not found. I am unable to recover nor restore my computer. I need help in what to do next. I attempted tom clear the BIOS & returned the BIOS back to defaults but no luck. Anybody with help is welcomed.

I have an SR1750nx, and I ran the PC Doctor Diagnostic
I put a dual core processor into it, and I also received the message BIOS halt not found.
I then put a different processor and it tested everything in my computer.The bios message never came up.
What does this mean??
Do you know???
Do I have a defective processor????
I downloaded every update and driver and, I was never able to get rid of that bios halt not found message.
I have a bran new hard drive, and I reinstalled the windows xp operating system.
I used a Western Digital diagnostic for the hardrive and it passed the test.

Pavilion G6 power on password forgotten by my friend, just trying to help her. halt code 66158175

pavilion G6 power on password forgotten by my friend, just trying to help her. halt code 66158175
This question was solved.
View Solution.

Hi,
Try entering: 79830171
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

H87M-P33 bios hangs (code 99) when both memory modules installed

Hello everyone!
MB: H87M-P33
CPU: Intel Core I5-4670
RAM: Corsair Vengeance LP 2x4GB kit 1600MHz 9-9-9-24 1.5V (CML8GX3M2A1600C9B)
PSU: Corsair CX500
Besides power button, nothing else is connected.
I'm building a brand new system. It boots with either module from the memory kit in either slot, but bios hangs (code 99) when BOTH memory modules are installed.
I tried to update bios to v2.1, but still won't boot with both modules installed.
Then I looked on the global site and found v2.2 bios for this board, which states "- Improved memory compatibility." and released on 2013-08-19, which is fairly recently. I tried to download it from download site (US, EU, CHN) but all sites give 404 error (file not found) to me.
Link to MB:
wwwDOTmsi.com/product/mb/H87M-P33.html#/?div=BIOS
Links for downloads I tried and give 404 to me:
download1.msi.com/files/downloads/bos_exe/7817v22.zip
download2.msi.com/files/downloads/bos_exe/7817v22.zip
download3.msi.com/files/downloads/bos_exe/7817v22.zip
I hope you guys can help me.

Quote from: klapaucius on 12-September-13, 15:10:43
It boots fine with a single stick in either slot. I tried flashing the attached beta bios via UEFI interface (choose the option with ME) and it updated. It still won't work if both slots are filled, works fine if either of dimm slots is filled with either stick from the kit.
ADD: I also tried putting whole RAM kit in my main machine and it works, so RAM isn't faulty.
Use a single RAM module, boot up, access the BIOS and be sure XMP is disabled.
Set the timings to 9-9-9-24, the voltage to 1.55-1.60V and the speed to 1333MHz.
Save the settings, shut down, insert the 2nd RAM module and see if it works.

Bios halt code 65910513

Similar Messages

Maybe you are looking for