BIOS halt not found Pavilion 7580

After attempting to use my HP Recovery disks, it was reported that files could not be copied when recovering XP. I386 files or something to that effect. When I DL PC Doctor & attempted to run it, I received 2 windows that showed AX,BX,CX,DX Patterns & under that was CPU Number 2 (Apic ID 01H) in the first window then in the second window below it for CPU Registers................. & BIOS halt not found. I am unable to recover nor restore my computer. I need help in what to do next. I attempted tom clear the BIOS & returned the BIOS back to defaults but no luck. Anybody with help is welcomed.

I have an SR1750nx, and I ran the PC Doctor Diagnostic
I put a dual core processor into it, and I also received the message BIOS halt not found.
I then put a different processor and it tested everything in my computer.The bios message never came up.
What does this mean??
Do you know???
Do I have a defective processor????
I downloaded every update and driver and, I was never able to get rid of that bios halt not found message.
I have a bran new hard drive, and I reinstalled the windows xp operating system.
I used a Western Digital diagnostic for the hardrive and it passed the test.

Similar Messages

H61M-P21 (B3)Updating Bios File not found

Tried to up date my H61M-P21(B3) Motherboard using the 7680vJ0.exe file on a usb stick from the MSI web site Version 19.0 Failed to update now can not get in to bios setup and just get a message.. Updating BIOS..................File not found
Can some one send me a link to the file I need to put on the usb stick? or email me the file please? All I have on the sitck at the moment is EIVB.BIN 7680vJ0.exe and a folder called XPELXR2X that is empty.Or do I have to rename the EIVB.BIN to somthing?
Cant acess the biose menu or the boot device menu so Im stuck any help would be very much appreciated...sorry think I posted this in the wrong section before
Thanks Tony

Quote from: oztony on 23-June-12, 16:13:57
Ok formated with hp tool put the 7680vJ0.exe and got updating bios .......bios file not found! no dos prompt if I could get to the dos prompt I thin I could flash maualy with FUDE238.EXE
Yup. That would probably work. I don't know. Not sounding good. Is there a reasonable priced pc shop in your area that has an SPI flash programming device that could flash the chip for you?

Qosmio X70-A-12 and new BIOS - FILE NOT FOUND

ifi would to download the brandnew BIOS driver (20/12/2013 - 1.40 WIN) i get an 404 !!!
http://www.toshiba.at/innovation/download_bios.jsp?service=AT
Thx for fixing that SOON
Qosmio X70-A-12

how long must we wait?
it is simply not acceptable that you are selling gaming notebooks, which you can not play because you have to have the fear start to burn them!!
finally brings a bios driver out cools this whole s***.
your support is very very bad.
if you have a problem you will be redirected to the forum where nobody helps or granted only s***** advices.
or you should call the expensive special phone number for 1 per minute but please.
I have a qosmio x70 a12, which has cost me nearly 2000 .
I can think for this amount of money you expect service and not dead left (bios 404) or during the day no download limit.
I'm almost compelled, the system cpu to throttle 100mV does not run out of laptop due to overheating. and in battlefield bad company 2 from the year 2010!

Z68A-GD55 (G3) bios file not found on usb

I've tried updating the bios to p8 and the pc got stuck in a boot loop.
Thinking the mobo was dead and buried I deleted all the bios files from the usb. After many cmos resets tghe computer has come back to life and is now asking for me to insert the usb stick.
My question is, can anyone please help with the missing files.
Also, I'm running a 2500k i5, I know now that I should not have done the update...

Hi,
Thanks for the quick reply. I maged to solve the problem, but here is more detail incase it helps others in a similar situation.
What happened is, I tried to update the bios in windows and the software did it's thing until it came to restarting before completing the bios update. At that point the PC was stuck in a constant boot loop with nothing showing on the monitor.
I tried removing battery, the ram etc and after a about 20 tried over 2 days, it suddenly showed up with a red screen asking for the usb stick to complete the ME 8 (?) update.
To get the missing files back, I redownloaded the bios from msi website, and opened the exe file using winrar. There was a complaint of corrupt archive but I was able to extract out all the files onto a usb stick.
This didn't fix the problem, then I renamed the BIN file to E7681IMS.P80 and it worked...the bios update finished.

Start-up problem with hp pavilion dv6t-7000‏: "Boot Device Not Found. Hard Disk (3F0)" error

I started getting start-up problems with my hp pavilion dv6t-7000‏. It happens intermittently.
The boot error is:
Boot Device Not Found
   Please install an operating system on your hard disk.
   Hard Disk (3F0)
   F2 System Diagnostics
   For more information, please visit: www.hp.com/go/techcenter/startup
Could a faulty BIOS update cause this problem?
Anyone else who may have experienced a similar problem?
I'd appreciate any help about this problem. Thanks.

Hi
Please find the link given below might help you to fix your issue.
Resolve Boot Device not Found Error Message
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

HP Pavilion dv6500 Entertainment Notebook PC series Operating system not found

Hello to all how are you doing guys doing today I'm having a problem and need the help from the tech world. So i have a Hp Pavilion dv6500 cto notebook. I started it up and got a black screen stating "Operating System Not Found". I couldnt get into safe mode to recover back to a safe point, i was able to get into the bios system to do a memory and Hard drive test, my memory test came back as a Pass but my Hard drive came back as a fail and stated "Replace Hard Drive".
Now i went out bought a new WD 500GB 5400rpm hard drive for the laptop, i installed it and did a Hard Drive test to make sure it was good and the test came back as a Pass. Now i had this laptop for years since 2007 and it broke just a few months ago, i just got the new hard drive yestarday and was playing doctor last night. When i got the laptop as a gift i was only given a recovery disk which did boot up and gave me the install now option and repair computer option. I chose the install now option and it was starting to install but then got this error message "Windows cannot open the required file D:\Sources\Install.wim. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070002." I read that you cant install windows from a recovery disk so now im back to square one.
So current status is I got a new hard drive that pass the bios test, memory test was a pass. I have no windows disk other then the windows vista recovery disk i tried but failed to install windows. I also tried a windows 7 disk from work but the disk wouldnt boot up came back with a message stating that disk couldnt be read there may be problem with the cd dvd drive or hard drive, but when i put in the windows vista recovery disk that boot up no problem. i just cant install window with it. So Im stuck with a black screen stating no operating system is not found. Note that i havent change the boot up line up back to hard drive to see if it would boot up the new hard drive but i dought it would change anything since its a brand new hard drive with nothing on it.
If someone could help me with step by step like how to get an operating system on my new hard drive. My wife has a laptop but with no cd drive so i would need instruction to boot get it on the usb. Hope i was helpful with my problem.

You have only tried questionable disks. You could order a recovery disk from HP but I am not even sure they still have Vista recovery disks. You could also buy a Windows 7 OEM disk and try that. it will cost you a bit but will be legal. What version of Vista is it? You can also try to find a Vista install disk and use the Key Code on the bottom of the laptop if it is still legible. Here is a link to downloadable .iso files you can use to make a Vista install disk that will activate with your Key Code:
http://downloadsnfix.blogspot.com/2012/08/microsoft-windows-vista-official-iso.html

HP Pavilion dv-4087CL Notebook receiving : Boot Device Not Found-Please install an operating system

My Duaghter is out of the country studing abroad. Her PC would no longer boot up so she took it to a support shop. They replaced her hard drive, fixed an over heating issue and reloaded her PC. Now she is getting this new error message and she is desparate to get this fixed. We have owned this PC for only 2 years. I am sure it is out of support.
HP Pavilion dv-4087CL Notebook receiving : Boot Device Not Found-Please install an operating system on your hard disk.
She took it back to the support shop and they upgraded her bios, but that did not fix the error message.
Please help! What can she do now.

Hi:
Normally that means the hard drive failed.
I know it was replaced but maybe the replacement drive went out too.
There is a hard drive diagostics tool your daughter can run in the BIOS.
I suggest she run it (enter the BIOS by tapping the F10 key as soon as she sees the HP welcome screen).
Then once in the BIOS, there should be a diagnostics menu..one for memory and one for the hard drive.
She should select the hard drive diagnostics application and see what it reports.
Then go from there based on what is reported.
Paul

Page Not Found when trying to find latest BIOS version

Hi,
I regularly get a blue screen with the following error code: 0x0000009c.
According to what I've found online updating my BIOS might solve this.
However, when trying to download the latest BIOS version I'm sent to a 'Page Not Found'-page after selecting my product.
Any advice on how I can find the latest available BIOS update for my product?
My product:
HP Pavilion Elite HPE-110be Desktop pc (Model: WC694AA)
My bios:
5.15 25/06/2010
OS:
Windows 7 Home Premium 64-bit
Thanks in advance,
Steven

Hello @StevenHbe,
You are running the most current BIOS for your computer so at this point the only option you would have is to restore defaults on your BIOS. If you still require help with this please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Need bios pwd reset for pavilion 15-n013dx win8 halt-code 65925557

need bios pwd reset for pavilion 15-n013dx win8 serl# [Edited for Personal Information] halt-code 65925557
An aquaintance used the laptop and set the bios password. I see you have a way to run the halt-code towards an access-code. It's an allmost new PC and I would rather not take it apart looking for the reset pins.
This question was solved.
View Solution.

Nfd try.
70683599
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

H61MU-E35 (B3) Updating BIOS....File Not Found Error

I have MSI H61MU-E35 (B3) Motherboard with Intel i3 CPU.
I downloaded latest BIOS File 7680vC3.zip (on web page it's says Version: 12.3 from -> -www.msi.com/support/mb/H61MUE35_B3.html#down-bios
Using Windows XP OS From 7680vC3.zip => Extracted E7680vC3.exe => Placed on USB Drive (I did not format USB Pendrive, and used by just making it empty by deleting files) ==> Ran this exe file on the computer where this motherboard is....
Inside Windows XP, when BIOS Update process started, In a green window, it shown me current BIOS old version and New Version side by side. (I did not given much attention to notedown from which number to which number it's updating).
In Windows XP after BIOS Process completed, it restarted computer (I kept USB File as it in the computer as I had read that, I have to keep USB in computer after restart).
When computer restarted...nothing came on the screen and just blank screen for long time and on the right side on screen bottom corner only letter like: A2 stayed for long long time. I waited for 15 minutes but nothing was happening except blank screen...
So, I restarted computer....and kept USB as it is in the computer....but Nothing comes on the screen...
After I concluded that, something is wrong, to resolve the issue...
--- What Try and Experiments I have done ----------------------------------------------------------------
(1) I placed Restarted computer without USB: and Message comes on the screen is:
BIOS Update is not yet completed, please insert the USB pen drive and reset system.
(2) I refered some forums, and also contacted MSI Support. As suggested, I formatted USB Drive with FAT32 and placed E7680IMS.C30 file (only one file) on USB placed in computer and started computer.. Now Message is coming:
Updating BIOS...... File Not Found..
Note that: E7680IMS.C30 File was given to me by MSI Support Staff as I did not kept Original files during formatting USB PenDrive.
But computer is not looking for .C30 Rom File, Computer is looking for .BIN File
(3) I have remove the battery and waited for 5 min. and placed again, to reset BIOS, but not difference on result or on message...
Renamed: file E7680IMS.C30 to EIVB.BIN
Result: Just Blank Screen with A2 text on right side bottom corner, No other message
In some other same issue post, they recommand to change ROM File name to: EIVB.BIN which worked for others, so I also tried and renamed: file E7680IMS.C30 to EIVB.BIN, in this case, I was able recreate original Issue: When computer boots, Screen stays completely Blank, and on the right side bottom corner, only 2 digit tect comes is: A2. Computer does not give any other message and nothing happens...even I waited for 30 minutes...
Also, by looking at USB Pendrive light, I can tell that, motherboard is reading file on the Pen Drive...
Renamed: file E7680IMS.C30 to E7680IMS.BIN
Result: Message comes on the screen: Updating BIOS...... File Not Found..
(5) What I am thinking is: When motherboard power-ups, it's giving me two different type of Valid message based on if USB is in the computer or not, based on if file name is .BIN or not, so I believe motherboard is still not dead and there are hope to feed the file which motherboard is looking for. But issue how to find what specific file which it's looking for... Even sometime I have seen at screen right side bottom area, 2 Digit numbers are changing just like system is doing internal healthcheck before booting up...
(6) Note that, I would like to put old version file on USB to feed, but one of the biggest issue with MSI is, once you download EXE from their website, to Extract EXE file content it needs to be run on the same motherboard computer, so in my case, if your motherboard is not in bootable cituation then you can not extract any other BIOS File to try...
Please help me...by havin this computer down....I am suffering everyday...
(By profession, I am electronics Engineer and have worked with programming Microcontroller and bootloaders, but in this case, I do not have SPI Programmer to program BIOS chip externally.)

Thank you flobelix and Nichrome.
Quick Result Summary: 128MB USB Key formatted FAT32 with HP Tool, made MS-Dos Bootable and placed EIVB.BIN file given by flobelix, but final result is: Screen comes Blank and only shows "A0" Code at right side bottom corner. nothing else.
Detail
Since Flobelix proviced ROM BIN File, I was too exicited to try it out and here is what I did...
(1) As per Nichrome link for HP USB Format Tool, I installed it on "Win XP" machine, and formatted 128MB USB key by selecting "FAT32" and selected option to make "MS-DOS Bootable" and shown Win98 source files as per the instruction.
-128MB USB drive made bootable with FAT32.
(2) I downloaded EIVB.rar given by flobelix and extracted and copied EIVB.BIN file on USB root.
Inserted USB in MSI and powered up...
As soon as I give power: Imidiately one normal beep and Screen comes completly Dark Blank. No message about "File not found". only at right side bottom of screen, it shows "A0".
I inserted USB key in each and every USB slot, but result is same: Screen stays Blank and on right side corner only "A0" letter.
I given around 3-5 minutes time to see something changes on screen, but no change.
- If I power-up computer without connecting any USB Drive: then message comes on screen that: Bios Update has not completed, please insert USB Key and Reset System.
- On USB Key, If I put ROM File with any other name (except EIVB.BIN) then Message comes: Updating BIOS... File Not Found...
- I have removed battery to give a try for resetting BIOS, but not change.
Question:
(1) Is it possible that, motherboard is looking for specific version of File or some different version of file ? and just staying silent and not complaining for existing EIVB.BIN ?
Here is I experiment: I simply created empty text file (0 Byte) on USB Drive and given name EIVB.BIN and booted up computer and same result: Blank Screen and just "A0" on right side bottom corner.
So, it tells me that, when power is given, the program which executes in motherboard for BIOS, it is not able to identify real or fake EIVB.BIN. I think, it's looking for some specific file and when not found, it's getting confuse on what to do....and not saying anything on the screen....
Has anyone old version BIN file of H61MU-E35 (B3) ?
Is there any trick so I can download older version Packaged EXE from MSI website and extract it ? I can give a try....

Hp notebook problem model # dv9823cl the cd/dvd player is not found in bios or device manager

If the CD/DVD player is not found in either the BIOS or Device manager is the problem in the motherboard?
if it is besides getting an external CD/DVD player, is there any other solutions?
Thanks

Before giving up hope I would try hard resetting the computer. Here is how you can hard reset the laptop:
To Perform A Hard Reset
Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for 5 seconds)
Disconnect the AC Adapter from the notebook.
Remove the battery from the bottom of the notebook. There will be a switch/button to eject the battery.
Wait at least 1 minute with all power sources disconnected.
Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.
Sometimes by removing all electricity from the computer and then reintroducing it, issues like this can be resolved. Give this a try and let me know if it resolves the issue or not.
Thanks!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

I have an HP Pavilion zv6000 laptop with which I have used iTunes for years. I downloaded iTunes version 11.1.4.62 and rcvd error msgs (Apple Mobile Device failed to start. Verify sufficient privileges to start system svc. Then a MSVCR80.dll not found.???

I have an HP Pavilion zv6000 laptop with which I have used iTunes for years. I downloaded iTunes version 11.1.4.62 and rcvd error msgs (Apple Mobile Device failed to start. Verify sufficient privileges to start system svc. Then a MSVCR80.dll not found.???

Hello Don,
Thank you for the details of the issue you are experiencing with iTunes. I suggest removing iTunes and all related components and reinstalling iTunes for the issue you described. The following article has steps to do this(it is important to remove all components in the order listed):
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
I recommend continuing with these articles if you continue to experience issues with iTunes:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

HP Pavilion dv6-3043ee Realtek Network Adapter not found in Device Manager

Hi I own an HP Pavilion dv6-3043ee, 64bit and running Windows 7. And somehow the network adapter for the LAN got uninstalled for some reason. Now after posting something on the site I finally downloaded the driver for my laptop.
Now another problem, after or at the end of the installation process a pop up message was shown:
"The Realtek Network Controller was not found,
If Deep Sleep Mode is enabled Please Plug the Cable."
Now I checked Device Manager to see if the Realtek Network Adapter was there but it wasn't. All I can see are:
-Atheros AR9285 802.11b/g/n Wifi Adapter
-Bluetooth Device (Personal Area Network)
-Bluetooth Device (RFCOMM Protocl TDI)
-TAP-Windows Adapter V9
Someone please help. Thank you.

If device is identified but there is no driver for it, it will be appeared as unknown device in Device Manager with question mark icon (?), are you seeing such thing in device manager?
If not, you should refer to your PC manufacturer's website and download.
Make sure report this issue using Feedback App.

Date and time at bios can not save the previous setting of hp pavilion g6-1208sx

my laptop hp pavilion g6-1208sx using windows 7, i`m using it since only one year .
date and time at bios can not update or save the previous setting.
every start i must set time and date on bios.
please help me how to saving bios time and date.

Hi,
you need to update your system bios to most recent version you can do it here:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=pt&cc=br&prodTypeId=32...
then you can update your bios settings date and hour and test again if persist you might need to replace you real time clock battery, but if your unit is in warranty i advise you to contact hp assistance so they can take an in warranty solution to you.
Any doubts or questions don´t hesitate.
Best regards

BIOS update for L50-B not found

Hi there,
I found out that there is a new BIOS update for my Satellite L50-B series but whenever i try to download the file it keeps coming with with 404 not found. Have toshiba pulled the update or something?
I'm running Windows 8.1 64 bit.
Thank you!

You cannot download BIOS update if you don't know exact model part number. Part number is visible on the Toshiba sticker that you can find at the bottom side of your notebook.
By the way is there some reason for BIOS update? Do you have some technical issue with your machine?
I mean if everything is OK you must not change anything.

BIOS halt not found Pavilion 7580

Similar Messages

Maybe you are looking for