BIOS is not detecting the CD-ROM

Hi All,
I am need ur help on following issue.
I have Toshiba Satellite M45-s265 laptop. the problem is BIOS is not detecting the CD-ROM. I
replace the CD-ROM and it works under Windows but when i try to BOOT from CD-ROM, BIOS didnot detect CD-ROM. My boot sequence is right. its CD-ROM -> LAN -> HDD -> FDD
My CD's are bootable for sure.
is there any MASTER/SLAVE issue ?? or MOtherboard or BIOS ?
pls help me out.
thx.

you're posting this all over the place aren't you??
have you tried flashing the yamaha firmware? remember the link i gave you?
have you tried a windows repair using the method i gave you?
http://www.msi.com.tw/program/e_service/forum/index.php?threadid=31741&sid=
i never liked yamaha dirt bikes...

Similar Messages

  • Does not detect HDD & CD-ROM!! heeeelp

    Hello!!
    I recently conected a new motherboard to a friend's computer (MSI 6368).  I connected everything, but when I boot, the BIOS does not detect the HDD and the CD-ROM. I think that is something to do with the BIOS configuration, but I dont know much about it and cant figure put what went wrong with it.  I tested another HDD to see if the current is damaged, but didn't detect the other also.
    I tought that maybe a BIOS update can do something, but I cant update the BIOS from a floppy.
    Please can someone help me out with this??? ;(
    thanx!!!

    has he set the jumpers on the drives right
    master /slave or none for a wd drive if on an ide on its own
    more detail would help
    is the detection on the ide set to auto in the first bios section

  • Vold Manager never detects the cd rom and any other removable media

    Hi,
    I have installed solaris 10(i86pc i386 i86pc) on my PC through Oracle Virtual box but I am stucked in a problem that the vold manager never detects the cd rom and any other removable media devices. I have tried many documented methods but could not get solution to this problem. I also stopped the volume manager (vold) and tried to mount the cd rom manually but still could not mount the cd rom.
    I don't know how to configure solaris in such a way that it could detect cd rom and any other removable media.
    Any help in this regard will be highly appreciated.
    Regards,
    Anees

    Is it an IDE or SCSI CD-ROM? Can you post back the output of the following command?
    ls -l /dev/dsk/c*

  • M2N78-LA Motherboard BIOS did not detect any Hard Drive

    Hi,
    I have M2N78-LA Motherboard and the BIOS did not detect ANY hard drive
    I tried
    1- Replaced the HD with another one.  did not work
    2- Changed the jumper of HD. did not work
    3- Changed the SATA data cable and power cable. did not work.
    4- Reset the BIOS by removing the battery and also by positioning the cmos jumber. did not work.
    I still all time get no hard drive detected, and some time jam on Detecting storage devices ....
    then after hours get no booting device.
    Any Idea will be good 

     M2N78-LA Motherboard BIOS  did not detect any Hard Drive, does anyone have an answer to this problem.

  • Why is the BIOS can't detect the HDs installed on IDE3 or IDE4 automat

    Why is the BIOS can't detect the HDs installed on IDE3 or IDE4 automatically?
    Theoretically, BIOS is supposed to be able to automaticaly detect all HDs on the IDE interface, including RAID, isn't it?
    From Windows, I can find my SCSI interface is enabled indeed, but not finding my HD on it.
    Besides, if I need to make RAID0-1 by software, then I prefer to install them by Windows 2000.
    Why bother to install another software?
    I think the performance of RAID installed by the software is quite inferior than the one installed by the hardware.
    Therefore, I don't think MSI will design some function like that.
    What's more,  While rebooting process, I press the CTRL+F, trying to get into the RAID BIOS, but nothing happened.
    Is it possible that the BIOS is crashed?  ?(

    The chip for the raid controller supplies its own bios for IDE3 and IDE4.  The only thing the main bios has to do with that part is enabling raid controller.  During boot does the screen ask you to press CTRL+F.

  • Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?

    Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?

    You really have to mess with the resoluton, espescially the refresh rate, as it varies from projector to projector, monitor to monitor. Even within the same brand! Because so many manufacturers are trying so many different things to become the next cool kid on the block, and the way the formats are being configured that's now part of the game.
    That's why so many professionally produced corporate shows hire a dedicated projectionist for the video presentations. Too many bugs in the honey.
    Refresh & sesolution are the first things to look at.
    Just so you know that colors in PowerPoint PC, and PowerPoint Mac, don't exactly match... go figure.
    I forgot to mention another thing, sometimes it's the projector that needs to be tweaked.

  • When i connect my philips 170c monitor to my macbook pro 13" early 2011, it does not detect the second monitor?

    help! i've googled around, but none seems to solve my problem
    my macbook pro is early 2011, 13", running lion.
    the philips monitor is vga only, so i have a mini display port to vga adaptor and connecting it to the vga.
    the screen on my mbp does turn blue, but no input is detected on the external monitor.
    any advice?

    If it does not detect the display automatically, try going to system preferences>displays, click detect displays.

  • On a windows 7, ifinally got the Iphone4 setup so i can copy my pictures off of the phone. know itunes will not detect the iphone to get it synced. how do i get it back to be seen by Itunes?

    On a windows 7, i finally got the Iphone4 setup so i can copy my pictures off of the phone. Know itunes will not detect the iphone to get it synced. how do i get it back to be seen by Itunes?

    See earlier post by tt2
    https://discussions.apple.com/message/7217190#7217190

  • Captivate 3 does not detect the micro

    Dear Users!
    I have a lot of problems, using captivate 3 on my vista
    installation. actually, the program does not detect the microphone.
    i am using this micro in other applications without any problems. i
    read this problem also exist in older versions of captivate. i am
    using realtech audio hardware. i found a patch for captivate 2 that
    does not work on captivate 3, but i found no pathch for captivate
    3.
    greetings from germany
    Rene Rose

    Hi Rene
    It should be logical to assume that any patch that corrected
    issues with version 2 would be automatically incorporated in
    Captivate 3.
    To my knowledge, your situation is one I've not seen or heard
    of in Captivate 3. So I suspect possibly a mix of hardware that we
    haven't seen before.
    I would highly suggest you report this to Adobe as a
    potential bug. Please provide them as much detail as you can. You
    do this using the Wish Form.
    Click
    here to view the WishForm/Bug Reporting Form
    Cheers... Rick

  • Windows support software not detected the presence of Windows support software

    I have already downloaded the Windows support software but why the Mac warning that it could not detecte the presence of Windows support software (I use USB for install)

    Same.

  • TS2776 I recently bought iPad 3 but iTunes on my Win XP laptop is not detecting the iPad and i am not able to transfer music to it.

    I recently bought iPad 3 but iTunes on my Win XP laptop is not detecting the iPad and i am not able to transfer music to it. I tried again after downloading iTunes 10.6.1.7 and it said it's not compatible with the XP version.

    I would recommend you try downloading iTunes for Windows 10.6.1 from this website for your XP based computer:
         http://www.techspot.com/downloads/70-apple-itunes-for-windows.html
    Hope this helps

  • WRT54GS Can not detect the router

    We lost the internet connection a few days ago for a couple of hours and since then had to reset the modem and when I try to set up the router with the Easy Link Advisor I get can not detect the router.  I am using the router to access the internet and it can't be detected???
    I have powered it off enough times and then some and need to get this running to use the laptops.
    I am running ver 7 firmware that it came with but I don't know what the exact version I am running or gor that matter where to find it.
    Thanks

    okay went through the firmware upgrade and installed it through 192.168.1.1 to admin tab and upgrade. it got to the reboot part and hung there for a bit, i hit continue or what ever it said and came back upwith a dns error and page unreachable. version installed is what i downloaded 7.50.5. i am still having the same problem, all the lights are lit that are suppossed to be lit, and i am on the internet and running through the router, and when i go into easylink advisor and start the setup process i have to go through the entire thing including selecting the router (which it should know what router it is) though removing the power cord and waiting and still told that it can not detect the router. i have no idea where to go from here. thanks!

  • Dell U2412M as an external display for my MacBook Pro mid 2008, the clarity of fonts are absolutely unimpressive.  The settings do not detect the Dell U2412M (which is grayed out), are there any drivers that need to be installed ?

    Dell U2412M as an external display for my MacBook Pro mid 2008, the clarity of fonts are absolutely unimpressive.  The settings do not detect the Dell U2412M (which is grayed out), are there any drivers that need to be installed ?

    I have posted this annoying Robles to bugreport.apple.com. Hope I can get locution (although Apple normally will not respond):
    On a software name Appfresh, it alerted me to update my MBPr 15 inches running latest OSX 10.8.2, with Chinese Word List Update 1.2. When I clicked on Software Pdate, app Store return No update available.
    My system have Chinese Word List Update 1.0 installed, and on October 5, 2012, Chinese Word List Update 1.1 was released by Apple, as alerted through AppFresh. However, this update never get updated on m system. I have to manually download chinesewordlistupdate.pkg from reviews.cnet.com/macfixit and install it manually. By doing so, I have Chinese Word List Update 1.1 on my system.
    The same problem occurred again today on November 5, 2012, where Chinese Word List Update is released by Apple. again, it fail to update from Software Update menu.
    Can you please:
    1. Explain why this problem occurred. This is so annoying.
    2. Advise me how can I get this Chinese Word List Date to update to version 1.2. Can you please send me the chinesewordlistupdate.pkg for version 1,2 so that I can manually install it on my system?
    3. How can I prevent similar problem with he subsequent version?
    Why Apple don't make this update standard as other update?
    Support please. Thank for response in advance

  • I have Iphone 5 and mac pro, and i want to transfer pics through idrop. but my iphone not detect the mac pro. How i can turn the idrop on my computer?

    I have Iphone 5 and mac pro, and i want to transfer pics through idrop. but my iphone not detect the mac pro. How i can turn the idrop on my computer?

    The Mac Pro - the desktop computer - does not support Airdrop, if that's what you mean.
    Matt

  • "Setup did not detect the required components. Setup will exit." !?!?!?

    I have a retail Audigy 2. Autoupdate recognizes my card and gives me the available list of drivers and applications for download. I download the following:
    ) Audigy 2 Drivers
    2) Audio Console
    3) EAX Console
    4) Speaker Settings
    5) Surround Mixer
    The ) Drivers and the 2) Audio console installs just fine. However, for each of the three remaining programs (3, 4, & 5 listed above) upon executing the downloaded file they all give me a pop-up window that says:
    ?Setup did not detect the required components. Setup will exit.
    This happens with all three of them. I want to install these because I am of the understanding that one of these contains the ?Speaker channel test? (for lack of a better word) that will test if my speakers are hooked up correctly to the right channels. The ) drivers, and 2) Audio console do not have that test. I created another post concerning this but nobody has replied:
    http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=39825
    I also tried unzipping the three executable files with WinRAR, and then executing the Setup.exe files but it yields the same results.
    Anyone know why I can't install these applications?!?!?!?!
    I swear, I have never had so many problems with a particular brand of product than I have with Creative products?.yet I keep buying them anyway?.sheesh?.Message Edited by Bridgeboy on -30-2005 05:0 PM

    nanite2000 wrote:
    superidan wrote:
    I have retail Audigy 2 card. tryed removing the card and installing on a differant slot. Nothing Works! it produces the same "no audigy 2 card found - setuip will now exit" Creative sould be ashamed thanks
    Yes, Creative should be ashamed.
    This is a known problem that has been around for months and they have failed to address, just like many other problems with their soundcards. For the solution to this particular problem, look here:
    http://forums.creative.com/creativel....id=3964#M3964
    If you would reread my original post in this thread, that solution did not work for this particular problem of mine. I have a SoundBlaster Li've! Card that this solution worked for, however it does not work of the Audigy 2 card?unzipping the files with WinRar and then running the Setup.exe files produces the same result?setup does not recognize the required components and will close.
    I?m not saying that the person who you quoted should not try it though.

Maybe you are looking for

  • Will Leopard work with a macbook

    I'm thinking of buying my first mac. It's the 2.16GHz one, for £829. Just wondering if leopard will be avaliable on this, or is it only going to be for the macbook pro's?

  • I need a help to use InDesign CS5 without problems every 30 days.

    30 days is the time limit that i have to use InDesign CS5, i want to use that forever without pay for, it's possible? Please help me.

  • How can I open a photo on iPhoto and PSE 10?

    Before upgrading to PSE 10 for Mac, I would select a photo in iPhoto, click on edit and PSE 8 would open with the selected photo.  Now PSE 10 will open but, there is no photo open in PSE 10.

  • 10.6.5 won't save files

    My wife has a MacBook Pro with OS X 10.6.5. When she tries to save either a Microsoft 2008 document or an Adobe Reader document, neither will allow her to save them. It's as if the only option is "Read Only" is available for the documents. I've looke

  • FLV only plays for 40 seconds

    Hi, I was hoping someone could help me with this. I have authored a flash slide show thing with fades and stuff for my website nigelgrimshawjones.com I have a FLV in one of the pages that loads and plays automatically, as I want it too. BUT. It only