Bios issues with k8n neo2, turn of memory test, and dmi pool data

Hey guys.
I recently flashed my bios to the 1.9's for the K8n neo2 running in my main machine.
Everything went ok for the most part, though i had some issues with boot record, and boot.cfg file. That stuff is all worked out now.
However, with this bios, I constantly get the extended memory test, on my 2 gigs of ram. The old bios i had, 1.4's, didnt do that. Is there an option to turn that off? I cant seem to find it any where?
My 2nd question is this, after this bios upgrade, my verifying dmi pool data takes longer then it used to, if it even did it before, im not sure, because my boot sequence was much faster.
How can I get rid of the "verifying dmi pool data" or speed it up?
Thanks guys

Tried to used the Bios 1c by Syar's. His bios is nice and easy. Maybe bould solve your problem.BTW do used liveupdate to flashed your Bios or is it manual? Stay away from using liveupdate as it causing a lot problems. Manual is the best way. Refer to my sig for the manual flashing. Here's the location of the files for the Bios 1C. Gd luck.
https://forum-en.msi.com/index.php?topic=59711.0
P/S: Create your own rig with details including the PSU and Bios revision and put in your signatures so others can help you.

Similar Messages

Freezing issues with K8N Neo2 Plat & 6800 gt

Well I get random freezing during games. Sometimes it freezes for 5-10 seconds then comes back, while other times it just freezes and the sound comes back but not the game.
I had this problem when I first upgraded.
K8N Neo2 plat
1gb corsair xms 3200
athlon 64 3500
aslo have:
420-30? antec tru power supply. I cant remember exact number.
6800gt ultra
audigy 2 plat
Now I first posted my problem a while ago and someone told me to try chaning the HT to 4x instead of 5x. So I did and it worked. It worked for a few weeks and now the problems have come back.
Any Ideas?

Along with the above issues, I've also found that a lot of my gaming probs with the 6800 are due to it being a "bandwidth hog" & it's latency needs to be adjusted lower to enable the other devices on the PCI bus (i.e. sound card) to get enough bandwidth to function properly. This isn't noticeable until you start some heavy gaming with a lot going on at once...
If your game ever practically chugs to a halt when a lot of sounds are being produced, this is the main problem. Here's a way & some notes on how to deal with it. Just like every "tweak" though, it's not guaranteed to work for everyone but I got noticeable benefits from it.
- D/L (I got it @ guru3D) PCI Latency Tool & give the "Read Me" a quick once-over. Write down the values for your devices, in case you need/want to change 'em back. Most items are well labeled - the 6800 & your sound card will be what you are most interested in. I wouldn't mess with the rest of 'em, as they deal with low level system items that are best left alone. Unless you are truly an Uber Geek!
- The latency for my 6800 listed as a massive 248 clks! For some reason, I've read that ATI cards don't default at such a large value, which might explain why people don't seem to have as many performance issues with 'em. Anyhow lower the 6800 to a more "reasonable" value, like 128 or 64. 64 seemed to work best for me.
- Save the settings, reboot & test it out. You can experiement with the sound card latency too, in order to find what works best for you, but I wouldn't set it at less than it's default value (32).
Hope this helps.

I cant find my pdf/ibooks on computer after backing up my iPad (they are on my iPad). Also, I'm having issues with my Ipad turning off about every 2 minutes so I want to restore it. Dont want to lose my files from my iPad.

Actually I have 2 problems: I cant find my pdf/ibooks on computer after backing up my iPad (they are on my iPad). I looked under Ipad, I Books, PDFs, and it doesn't show them on the computer. How do I manually transfer these files?
Also, I'm having issues with my Ipad turning off about every 2 minutes, and I want to restore it. I want to make sure all of the files are backed up before I restore. My trouble started when I was trying to update my IPad but it was taking too long (internet was scetchy) so I powered off...now Im having problems. I haven't tried to update again since this problem. Any suggestions? Should I restore? Should I update to 7.0.6? (currently 7.0.3).
Thanks,

Try here:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer

I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,00 songs and They are all in my music folder..What can I do to fix this issue?

I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,000 songs and They are all in my music folder..What can I do to fix this issue? I've looked at all the tutorials on youtube and none of it works. I recently got a new computer and I Back-Up all my music and itunes playlist and I import it on my new computer with the new itunes and I go to play a few songs, it says I'm missing them I locate a few but it's still like 3,000 missing and again they are all on the computer and in one folder..Please Help !

I did that and nothing changed half my songs still have examination marks beside them
I also just tried dragging my folder of music int he playlist and it duplicated all of my songs? My playlist was at 5k now it's at 10k becuz of 3 duplicates of songs. Is there a way to delete multiple duplicate files?

HT4623 i have issue with my iphone5, the phone is open and good network signal, but when some one calling me they cant reach me, like the phone is off

i have issue with my iphone5, the phone is open and good network signal, but when some one calling me they cant reach me, like the phone is off

You are as far as you can be with the original iPad; only iPad 2 and greater will update to 7+

I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

My Macbookpro has turned into microsoft windows and lost all data, how do I recover it with my windows 7 still inside? I accidentally install directly, Help please...

My Macbookpro has turned into microsoft windows and lost all data, how do I recover it with my windows 7 still inside? I accidentally install directly, Help please...

ok turn it off manually and turn it back on while holding the apple logo bottor or the function botton this will give you an option to choose if you want to startup with osx ow windows. let me know if this works
<Email Edited By Host>

I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be

I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be selected. Any thoughts? TIA

Greyed imaged in the Import dialog box mean you have already imported the photos into Lightroom, so there is no need and no benefit to importing them a second time.
Just go to the Library module, search for the desired photos, and resume working on these photos.

TS1702 I'm not able to update Smurf's Village. Tried most of the things proposed on the net including restarting the iPad and trying syncing with the computer. Had a similar issue with another application. Had to delete and reinstall it, with all history

I'm not able to update Smurf's Village. Tried most of the things proposed on the net including restarting the iPad and trying syncing with the computer. Had a similar issue with another application. Had to delete and reinstall it, with all history lost.
Tried following up with the developer's instruction. Didn't help. Developer suggested contacting Apple if their instruction didn't work. Tried the various methods recommended on the Apple site. Same result.

Telling is that you tried most of the things on the net doesn't tell us exactly what you did try, so we are all still left to guess .....
Sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again
If that doesnt work - go to Settings>General>Date and Time - set the date ahead by a few months. Try to update again. If you get an error message of any kind - go back and change the date and time to automatic again. Then try again.
If that doesn't work, restart your router and reboot the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)

When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)
I have attached the url of the unwanted site.

Use this add-on [https://addons.mozilla.org/en-US/firefox/addon/custom-new-tab/ '''Custom new tab'''].

DMI pool data clicks at K8N neo2

I have neo2 mainboard
I have updated the bios to 1.8 version (the former was 1.5)
now when I restart the computer a "verifying DMI pool data" message appears which is followed by several 'clicks'
what is it and how can I silence those clicks?

Hi! From where do these "clicks" come? I have the Neo2 and Bios V 1.8 and I get clicky' wid' it too... Mine seem to be coming from the drives, like an old school floppy seek sound, try disabling boot-up floppy seek and listen to the results...

What would happen if I turn off my backup and delete backup data From my device? Will it delete my music and everything for ever or just stay in the cloud but not on my device?

What would happen if I turn off my backup and delete backup data From my device? Will it delete my music and everything for ever or just stay in the cloud but not on my device?

If you have multiple devices backing up to the Cloud, you will see all of them listed. You would click on each device to change what is backed up from that device. You can then delete your individual back-ups.
Once you have all your settings to your liking, you can then go back to Settings>iCloud>Storage & Backup, and click on Back Up Now (bottom of the screen) to create a fresh backup with your new settings.
Cheers,
GB

Solaris 8 x86 Hangs on reboot with Verfying DMI Pool Data

I've just installed solaris 8 on intel. I previously run 2.7 on same system no problem.
After installing 8 and rebooting the machine hangs after displaying
Verifying DMI Pool Data .........
It appears to of verified, but then does nothing else. I have checked all components are compatible (supported), tried differing rebuilds, upgrading from 2.7 However every time I get the same problem.
Any ideas?
alan (every).

Green,
I need you to think really hard here with me...what was the last program, piece of hardware you loaded into the machine? I've seen this problem so many times and it will drive you wild...you're having a driver or software issue during bootup and it's hanging the system..
What I would do is see if I can get into safe mode by hitting F8 as the system starts up...if it will boot into safe mode then go uninstall whatever the program is that you installed last or uninstall the drivers of whatever hardware you installed last...
Then try rebooting again normally...
I'll warn you now that I've only been successful in doing this when I've rebooted the system twice prior to trying this fix...if you rebooted more than twice it will corrupt your MBR and you'll have to FDISK and start all over again...
Insert your boot disk Win98SE preferred...select Boot from floppy with no CDROM or Network...
Type FDISK at the A prompt...go in and delete the non dos partition...DON'T CREATE ANOTHER PARTITION OR FORMAT THE DRIVE...
If it's a Western Digital Drive go to their website and get their Drive Utility tool and run it on the drive...
If it's a Maxtor go get Powermax from their site and run it on the drive...
Do same for any other mfg drive i.e. Seagate, IBM or whatever...
THEN if it passes the tests with no errors use the drive to reload your OS again...THIS TIME load your drivers one at a time, same with your software...Do a system restore point prior to each load...this way you can easily undo whatever fails if anything...
Hope that helps!
Cheers!! 8)

Protocol Issue for the photo in Who's Who and Change Own Data

Experts !!
We have implemented EP 7.0 with ESS.
Inside Who's Who and Change Own Data employee photo display is configured which is coming via content server.
This is http content server and tied to repository id.
Now SSL is implemented so all the web dynpro page which is rendered is https:// <xxx> format.
Similarly, Change Own Data WD Page is also a https:// if we look at the url.
Strange part is that photo which appears is still http. Via tcode OAC0, I have maintained the ssl port as 443, but of no use.
Any idea to make it https and then close port 80 for security reasons.
Appreciate your input and help.
Regards,
Rahul

Dear all,
Thanks for the reply. Actually i need to display the photo in Who's who iView(com.sap.pct.erp.ess.whoiswho iView) which is in ESS business package . Since we don't have content server in our landscape, Please let me know how we can configure the Who's who iView(com.sap.pct.erp.ess.whoiswho iView) to display the photo from KM.
Thanks in advance,
Vasu

I have an Apple MacBook on which Lion 10.7, plus all updates, are successfully installed. Can you tell me if TechTool Deluxe, normally supplied with Apple here has been now tested and found to run successfully? I have run the program to check a problem

I have an Apple MacBook on which Lion 10.7, plus all updates, are successfully installed.
Can you tell me if TechTool Deluxe, normally supplied with Apple here has been now tested and found to run successfully?
I have run the program to check a problem that I'm having. The particularly with video, and also volume structure. TEchTool Delux reports a failure for both of these components.
I am wondering if this is realistic or not, given the start-up screen for TechTool Delux mentions on start-up that it has yet to be tested fully with Lion?
With thanks, Ron.

Yes, I understand, however, he Macbook is out of its Applecare, but the TechTool it still on the machine. Does that entitle me to an upgrade in TechTool?
I suspect not, hoever, seeing I am running Lion, I am not sure at all? If you can answer this question it will help as then Imight be able to solve the problem I'm having.
Best regards, Ron

Bios issues with k8n neo2, turn of memory test, and dmi pool data

Similar Messages

Maybe you are looking for