Bios Machine Type number does not match with that recognized in Windows

Hi.
I found that my Thinkpad Machine type number is different to that recognized Lenovo's Solution Center and Windows's system infor.
Serial number match but not the machine type number.
Does anyone know why it is? 
If I send my computer for warranty, does lenovo look at machine type number in Bios or in Windows or somewhere?
Thanks

I would not be concerned about what Windows reports.
Does the tag on the bottom of the laptop match what you see in BIOS?
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

  • SCCM issue - "LANG_LIST has some locales which does not match with the locale of serial number"

    I have a problem with the error "LANG_LIST has some locales which does not match with the locale of serial number" recurring.
    I am trying to install Acrobat XI Std silently by SCCM.
    I've used the Adobe Customisation Wizard to create a mst which include the volume serial number we have with our licence purchases. Note that I am in Australia. I use the command line in SCCM for the install as "msiexec /i "AcroStan.msi" TRANSFORMS="D&B_AcroStd.mst" /qn" which fails silently. If I install on a local machine using an admin command prompt and changing to /qb at the end, I get the aforementioned error.
    I have a few things to try and resolve, having searched the adobe forums and other forums for the solution. The mst is only trying to install US English & I have even gone so far as to use the direct editor in the customisation wizard and change some values in the property table to resolve this. In the property table I can confirm that LANG_SEL_DEFAULT = ENU, REGIONAL_LIST = ENU, LANG_LIST = en_US, ProductLanguage = 1033
    Is there a way to check the language specified for ym serial number?
    Bryndon

    Update on a couple of details:
    @Sabian,
    Thanks for the location, I've downloaded and then when I tried an install of the newly extracted msi (admittedly on the same computer) I got exactly the same issue. Of note though is that running /qf automatically brought up the same serial number and the same incorrectly spelled company name. Installing on another computer (freshly imaged) doesn't have those inputs already present under /qf. Next when I try using the transfrom (a new one) with /qr it gives an error of the serial number, displaying the entire serial.
    @Sebastian
    I've had a look through yours and it seems our issues could have the same origin. Looks like I may have to call customer support regarding the serial number as Sabian suggested in your thread.
    The bit that gets me is when the same serial number is used in a manual install (or /qf) then it installs ok without any errors.

  • Getting error when view - Requested data type does not match with existing

    I have the siebel web service
    In the BI publisher as mentioned in the 'Siebel_BI_Publisher_Integration_Concepts.pdf', I have imported the siebel web service
    BI can recognize the 'Web service' and methods.
    I have created the paramters. The data type is 'String'
    When I try to view the report using the BI publisher, I am getting teh following error in th UI
    "Requested data type does not match with existing data type"
    This is the first time I am using BI publisher to call the Siebel web service. I don't know what this error means
    I don't know whether any log file generated wit the details of this erro message
    Any help is much appriciated
    Thanks,
    Kavitha

    Hi all,
    have you find a fix for this issue? Im facing the same situation, using Complex type, and String data type both in the service and Bi publisher. We are consuming CC&B services, and we have noticed this error appears when BIPublisher is running on WebLogic (10.3) but it does not appear when BIPublisher is running on OC4J , of course running the same report on both application servers.
    Any idea?
    Thanks a lot, regards
    Nestor

  • PWA site template with warning "Your Local Machine Time Zone does not match your current Sharepoint Regional Settings"

    SharePoint 2010 (SP2010 SP1+ AU CU 2011) site built with Project Web Access template shows message in yellow "Your Local Machine Time Zone does not match your current Sharepoint Regional Settings."
    KB Article http://support.microsoft.com/kb/2749599/en-us suggests applying Windows and SharePoint updates, but does not points to a specific update. Also suggests to enable "Always follow
    web settings" for affected users who are in different time zone than the server time zone, but it does not work either.
    Manjeet Singh

    Hi,
    According to your post, my understanding is that SharePoint 2010 (SP2010 SP1+ AU CU 2011) site built with Project Web Access template shows warning "Your Local Machine Time Zone does not match your current Sharepoint Regional Settings".
    Users are getting this message even after correctly specifying and changing the timezone in their Sharepoint Settings. This is a common problem across the net, but we've found a workaround
    that will eliminate this problem.
    Step 1: Open your Web Database in your Browser
    Step 2: Click the Arrow Under the Login ID (upper right corner)
    Step 3: Choose My Settings
    Step 4: Click the My Regional Settings Link
    Step 5: Uncheck the 'Always Follow Web Settings' check and specify your time zone.
    Step 6: Click OK
    For more information, you can refer to:
    Warning Message about time zone difference between your computer and the regional settings
    of Sha...
    Thanks & Regards,
    Jason Guo
    Jason Guo
    TechNet Community Support

  • Setup.exe gives a "LANG_LIST has some locales which does not match with the locale of serial number"

    I ran the Adobe Customization Wizard XI to create a transform file and now when run setup.exe it always come with the error "LANG_LIST has some locales which does not match with the locale of serial number".
    It does the same thing when using msi with the command : msiexec /i  AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
    Here is my setup.ini file
    [Startup]
    RequireOS=Windows XP
    RequireMSI=3.1
    RequireIE=7.0.0000.0
    Require64BitVC10RT=1
    CmdLine=/spb /rs /sl"1036"
    [Product]
    msi=AcroPro.msi
    vcrtMsi=vc_red.msi
    vcrtDir=VC10RT_x64
    Languages=1033;1036
    2052=Chinese Simplified
    1028=Chinese Traditional
    1029=Czech
    1030=Danish
    1043=Dutch (Netherlands)
    1033=English (United States)
    1035=Finnish
    1036=French (France)
    1031=German (Germany)
    1038=Hungarian
    1040=Italian (Italy)
    1041=Japanese
    1042=Korean
    1044=Norwegian (Bokmal)
    1045=Polish
    1046=Portuguese (Brazil)
    1049=Russian
    1051=Slovak
    1060=Slovenian
    1034=Spanish (Traditional Sort)
    1053=Swedish
    1055=Turkish
    1058=Ukrainian
    1025=English with Arabic support
    1037=English with Hebrew support
    6156=French (Morocco)
    CmdLine=TRANSFORMS="AcroPro.mst"
    [Windows XP]
    PlatformID=2
    MajorVersion=5
    MinorVersion=1
    ServicePackMajor=3
    [MSI Updater]
    Path=WindowsInstaller-KB893803-v2-x86.exe
    I don't know what goes wrong as took my serial number on my profile from the adobe web site, same thing for the download of the software.
    Does it means that the serial number provided was invalid for deploying ?
    NB.: My goal is to deploy our Acrobat XI through SCCM in silent mode and I don't know if there is extra consideration for that.  For now it's only not working at the command line.
    Another important point is that the install works great without customization !  If I just run the setup.exe from freshly extracted files and I use my serial number, everything is working fine.
    So what goes wrong ?

    Thanks for the reply brogers_1 and Vinod Dbhal, you gave good hint.
    I retried installing the initial package in French on a Windows 7 English and the software installed properly in French. 
    As I used to work with virtuals for those tests, I rolled back my virtual and redo my test installation with chosing to install it in English on my Windows 7 English and again the installation finished properly but I was surprised when I realized that even if I chose English as language, the software was running in French !
    Of course I can change the language settings (in the edit-preferences-language) to follow the operating system witch is nice.
    That gave me the cue I needed to know.  I started from scratch my customization with choosing only the French language in the "Application Languages" and I left the MUI Languages blank and saved the .mst
    I ran again the same command : msiexec /i  AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
    And everything works fine.
    NB.: As I used the .msi directly, of course I had to install the prerequirement Visual C++ 2010 first.  Otherwise the installation failed without any error message.
    Thanks again to you for your good hint,
    Bob

  • Selected file cannot be linked because its type (video) does not match the original file's type

    I've been using Premiere Elements 9 for a couple of years now, and a few months ago I began having problems importing AVI files created from a BlackMagic Intensity Pro capture card.  (These issues were not previously occurring, and since they surfaced, I have exhausted the various settings for the BlackMagic card, used various software such as BlackMagic's own Media Express as well as the freeware VirtualDub, and still have the following problems.)
    In addition, these AVI files play just fine, in their entirety, using Windows Media Player and in Quicktime.
    The problem (or possibly two, but I suspect they could be related) is that most of the AVI files I attempt to import will either (1) import all video and NO audio, or (2) import ONLY a short segment of audio and video, and the length that Elements imports varies.  Usually only in the range of a minute or two.  The rest of the file is not imported at all.
    After much digging in forums, and testing various settings in trying to figure out the issue, I decided to back up all of my files and completely wipe all hard drives and start over with a fresh installation of Windows and Premiere Elements 9.  I haven't installed much else yet, as I wanted to first find out if the reinstallation improved things with Elements.
    For the first project I created in Elements after the reinstallation, Elements successfully imported an entire AVI that was nearly 2 hours long, audio and video.  This was a file that previously would not import properly into Elements.  This suggested that my earlier installation of Elements must have been corrupted somehow.  At this point I was very hopeful that all was well.
    I proceeded to edit the video as I had wanted, saved the project, and exported it to an MPEG format file.  I had originally wanted to export it as an MOV, but I hadn't yet installed Quicktime, so Elements couldn't do that just yet.  The MPEG export was successful and plays fine.
    However, I then installed Quicktime, and once it was finished, I restarted the PC and reloaded the same project.  This time, Elements claimed the media was offline.  I double-clicked on a segment of the video, and directed Elements to the raw file, but then an error message popped up:  "The selected file cannot be linked because its type (video) does not match the original file's type (audio and video)."  This was the same file I had JUST edited and of which I created an MPEG.
    I tried creating a new project and the "Get Media" function to import the AVI again, but this time only the video imported with NO audio.  (This would explain why the error message said what it did, but not why the audio wasn't imported.)
    What in the world is going on with Elements???  I am baffled since the ONLY task I have done on this machine after a complete reinstallation of both Windows and Elements is edit one AVI.  I find it very hard to believe that just installing Quicktime caused this.
    Some info on my system:
    System:  Asus P6T w/ Intel i7 920 and 12 GB memory
    OS: Windows 7 Ultimate
    Video Software:  Premiere Elements 9
    Capture Card:  BlackMagic Intensity Pro (PCI-e)
    Capture Software:  AVIs recorded with either BlackMagic Media Express or VirtualDub (only prior to the reinstallation, as neither of these programs are currently installed)
    I'm getting to the point with Elements that I might need to just abandon it and find something else that is more reliable.  Anybody have suggestions to help with this, so I won't have to migrate?

    mtnsports
    We think that we need to start off with definiting the properties of these .avi files that you are importing into Premiere Elements 9.0/9.0.1 (assumed that you are working for the required 9.0.1 Update).
    You say that the "avi" was created from a "BlackMagic Intensity Pro capture card". What are the properties of this .avi that you imported into Premiere Elements? Not all .avi are created equal. What is the video and audio compression, frame size, frame rate, interlaced or progressive, pixel aspect ratio, typical duration?
    Based on the properties of the video what have you been setting as the project preset?
    Let us start here.
    More later.
    ATR

  • Recovery scenario - Voting disk  does not match with the cluster guid

    Hi all,
    Think of you can not start your guest VMs just because it has a corrupted system.img root image. And assume it contains 5 physical disk( which are all created by the RAC template) hence ASM on them.
    What is the simplest recovery scneario of the guest vms (RAC)?
    Can it be a feasible scenario for recover of the availablity? (Assume both of the RAC system images are corrupted and we prefer not a system level recovery rather than backup / restore)
    1. Create 2 RAC instances using the same networking and hostname details as the ones that are corrupted. - Use 5 different new disks.
    2 Shutdown the newly created instances. Drop the disks from the newly created instances using VM manager.
    3. Add the old disks whose system image is failing to be recoverd but ASM disks are still in use (from the newly created instances using VM manager.) to the newly created instances.
    4. Open the newly created instances
    Can we expect the ASM and CRS could be initialized and be opened without a problem?
    When I try this scenario I get the folllowing error from the cssd/crsd .
    - Cluster guid 9112ddc0824fefd5ff2b7f9f7be8f048 found in voting disk does not match with the cluster guid a3eec66a2854ff0bffe784260856f92a obtained from the GPnP profile.
    - Found 0 configured voting files but 1 voting files are required, terminating to ensure data integrity.
    What could be the simplest way of recovery of a virtual machine that has healthy ASM disks but corrupted system image?
    Thank you

    Hi,
    you have a similar problem, when trying to clone databases with 11.2.
    The problem is that a cluster is uniquely identified, and this information is hold in the OCR and the Voting disks. So exactly these 2 are not to be cloned.
    To achieve what you want, simply setup your system in that way, that you have a separate diskgroup for OCR and Voting (and ASM spfile), which is not to be restored in this case of szeanrio.
    Only all database files in ASM will then be exchanged later.
    Then what you want can be achieved.
    However I am not sure that the RAC templates have the option to install OCR and Voting into a separated diskgroup.
    Regards
    Sebastian

  • Free space of mdf and ldf does not match with database free space

    In SSMS i saw file size related properties and found below details for one database.Here values does not match with other properties. Here size of the mdf, ldf and total size matches with other values under each window. But Available free space of mdf and ldf
    if added then it does not equal to Available free space shown in shrink database window and free space shown in database properties. This is true for any database. Why is it so? Please can anyone explain the logic behind this?
    Under database properties:
    Size: 91.31 MB
    Space available:13.40 MB
    Under database file properites:
    mdf size:17 MB
    ldf size:75 MB
    under shrink database:
    currently allocated size:91.31 MB
    Available free space:13.40 MB
    under shrink file-for data file:
    currently allocated size:16.38 MB
    Available free space:12.63 MB
    under shrink file-for log file:
    currently allocated size:74.94 MB
    Available free space:55.62 MB

    Hi,
    Database properties and database shrink show the total (log+data) values. Others show the individual sizes, log and data separately. 
    I hope it helps.
    Janos
    There are 10 type of people. Those who understand binary and those who do not.
    My Blog |
    Hire Me
    This does not answer my question. If you add allocated space of mdf and ldf it equals to database allocated size.But i am asking why this ldf and mdf free space together(when added 55.62+12.63 ) does not equal to database free space?

  • CS5 The selected file cannot be linked because its type (audio) does not match the original file's t

    Greetings,
    I have been working on a very large project using CS5 on my desktop computer. Now I am on the road and bought a laptop so that I can continue to work. I placed all of my assets on a back-up external 2tb drive (which I was able to open without incident on my desktop). I installed CS5 on my new laptop and now when I try to open the project I get the following message "The selected file cannot be linked because its type (audio) does not match the original file's type (audio and video)". This message appears before I indicate the path to any of the assets. Then, when I do indicate the path to each asset, I get the same message for individual files.
    Any advice is appreciated.
    Thanks,
    Jeremy

    I had this problem and have found a solution / workaround:  my issue was when trying to open a cs5 project that had been collected on mac and then transfered to pc, my footage was all png image sequences but this will hopefully work in other situations...
    Open the project and cancel the first dialogue box that pops up where you get the "file cannot be linked" error when trying to reconnect footage.  The project will open and then in the project panel, right click on any footage that needs reconnected and choose "Replace footage..." this will open a dialog that will allow you to select the file that gave you the error in the first place without any issues.  Any sequences with that footage will now work and everything show be all good. 
    You may experience "Offline material is present in this export and will be encoded using the offline media graphic" on first export but apparently you can just ingore that, but i guess it's woth testing a few short sections before commiting to a huge render...
    This workaround isn't perfect as i had about 50 pieces of footage i had to relink via this method one by one but at least it saved redoing the edit which was critical for my project...
    good luck!

  • Final payment register does not match with Preliminary register and does

    Final payment register -does not match with Preliminary payment reigster- it should have invoice number and PO Number whereas Preliminary payment register has INvoice but does not have a PO number .Cheques issue they would like to see -against which system generated PO only

    Please see these docs/links.
    R12: What replaces the 11i Preliminary Payment Register? [ID 750109.1]
    What Happened To The Preliminary And Final Payment Register In R12? [ID 746339.1]
    EBS File Comparison Report Now Available
    https://blogs.oracle.com/stevenChan/entry/ebs_file_comparison_report_now
    Thanks,
    Hussein

  • PickList Update - Input values [...] does not match with expected class names

    Hi everybody!
    I try to update a picklist via b1if but I always get the following error-message:
    Exception : Input values '["3" , "3"]' does not match with expected class names '["com.sap.smb.sbo.api.ICompany" , "java.lang.Integer"]' for SBO object type '156'
    As you can see in the error-message I use object type 156 “PickLists”.
    Below you can see the message to the B1 Object – atom:
    <Payload id="atom1" Role="X">
        <System xmlns="">0010000100</System>
        <QueryParams xmlns="">
            <AbsoluteEntry>3</AbsoluteEntry>
        </QueryParams>
        <PickLists xmlns="">
            <row>
                <PickDate>20120914</PickDate>
            </row>
        </PickLists>
        <PickLists_Lines xmlns="">
            <row>
                <OrderEntry>248</OrderEntry>
                <OrderRowID>0</OrderRowID>
                <PickedQuantity>1</PickedQuantity>
            </row>
        </PickLists_Lines>
    </Payload>
    …and the result:
    <Payload status="success" id="atom2" Role="C" DImsg=" Exception :
    Input values '["3" , "3"]' does not match with expected class names
    '["com.sap.smb.sbo.api.ICompany" , "java.lang.Integer"]' for SBO object type '156'"
    DIresult="failure" keyvalue="3" keyname="AbsEntry" payload="atom1" objectid="156"
    method="Synchronous Update" b1login="Technical User" system="0010000100"/>
    I just can’t figure out meaning of the error-message…anyone can help?
    Thanks in advance!
    Best Regards
    Alex

    Hey Alex,
    I have a similar problem. I suppose you have solved your problem, because this post is very old. Perhaps you could share the solution?
    Best regards
    Benjamin

  • CT number does not matched

    Hiiiiiiiiiiii
    I bought Compaq CQ40 laptop two years ago and it is under extended warranty. Recently Optical Disk Drive stopped working so I took my laptop to service centre and they told me that the CT number of Optical Disk Drive does not match with the HP's record so they won't replace it. I have never given my laptop for servicing before.
    I feel like being cheated either by HP or by Online IT Shoppe India Pvt. Ltd. from where I bought my laptop.
    Please help me.......
    Thanksssss

    Its happend in kolkata.
    I have complain regarding odd issue if laptop 2000 model.
    Arnab sen(hp engg) came and saw my odd and told me that mention ct no is not match with this hp product.
    But I never repaired or open by non persinel hp eng.I want to know he was right or not??
    What should I do?

  • Receipt Qty in AP invoice does not match with actual receipt qty.

    Hello everyone,
    I am facing an issue in oracle Payables module. When we match invoice with receipt while preparing invoices, Quantity received shown in the Receipt quantity block in invoice window does not match with actual receipt quantity of that item. Due to this difference user is not able to book the invoice. Please help me to resolve this issue.
    Thanks,
    Himanshu Gupta

    Exactly. What i mean is in the invoice window, There is a block called reciept quantity shown in the lower part. The received quantity displayed in that block is more the actual quantity being recieved. (when we see the recieving transactions). is this a bug?
    thanks for your reply, awaiting your response......
    Himanshu Gupta

  • Vendor aging unreconciled bal. does not match with TB Acct. Payable balance

    Dear all,
    When i take unreconciled vendor aging report with selection creteria all vendor codes selected,aging date as 31/03/09 and posting date from 01/04/08 to date 31/03/09,Interval - 30 Days,By Journal postings
    Deticked all check boxes in it.
    Aging report total balance of all vendor does not match with account payable balance in Trial balance ?
    But for reconciled aging totals and trial balance total are same.
    How to solve it ? or i need to do any settings ?
    Jeyakanthan

    Hai!
    What version of SAP B1 u r using.
    I do got the same problem for my  customer. I did this..
    1. Run Aging Report for all Vendors. Donot check Recon Transaction.
    2. Export to Excel
    3. Run TB for BP selecting Vendors alone.
    4. Export TB to Excel.
    5. Find vendors who is having mismatch in their balance. (use V-Lookup in Excel)
    6. Run Detail G/L Transaction report for those Vendors one by one.
             *Selection from date: Age from date To date: Age To date *
             *Selection Reconcilled Transaction only
    7. Report Balance should be Zero. If not this problem is because of Internal Reconcillation.
    8. Open *Check and Restore Previous reconcillation * select the vendor, internal
    9. see the reconcillation details.
    10. see the posting dates. All should be in previous fiscal year. (I mean the reconcilled set should have same fiscal year ex: Recon -2 trans should be in same fiscal year)
    11. If, that is corrected and still difference exist means.
    12.Go to Manage Previous Reconcillation
    13. Select BP and Internal (Donot check system reconcill Trans)
    14. Check the Reconcillation wheather all in same fiscal year.
    Regards,
    Thanga Raj.K
    +91 9710445987

  • GR/IR account G/L balance does not match with BSIS table

    Hi,
    I am preparing a report which uses table BSIS.But the total in the table does not match with the GR/IR G/L balance account.When I click on balance item display in FS10N the entries match with that of BSIS but the total is different.Also how to factor the year opening balance entries in the report.
    Thanks
    Arun

    But that will slow down the system considerabley, because BSEG contains a huge data

Maybe you are looking for