Bios not booting PLZ HELP
ok my friend brang over his toshiba A100 LE1 laptophe told me it was password locked i assumed it was just an xp password to recover, but it turned out his bios pasword was no longer working so i started reading and thought there would just be a jumper to clear the bios memory and some guy told me i had to pop the memory out and peel back the mylar layer under it and jump the solder connector marked PAD500 so i did that now when i turn on the computer it lights up like its gonna work and then befor you see anything from the bios it shuts off and the just loops like that over and over CRY is just a paper wieght now or can this be fixed????i havnt even told the kid yet what i have done and feel bad I WISH I NEVER DID ANYTHING TO IT SUN OF A GUN
PLZ PLZ PLZ HELP
Solved!
Go to Solution.
well i fixewd it turns out i did every thing correctly eccept the ram dont like to go i his computer all the way so i just wasnt getting the ram in all the way and the computer wouldnt boot haha
[admin edit of pw removal info]
Message Edited by jim on 02-09-2009 12:09 AM
Similar Messages
-
IN Clause with Ampersand(Lexical Parameters) not working plz help
hi
I m writing the following query but it is not working. plz help how can i apply ampersend(lexical parameter) with IN clause.
select * from emp where to_number(empno) IN (&p_1);
thnxHi,
Try to change the query as
SELECT <field_list> FROM EMP &P_1and in the AFTER PARAMETER FORM trigger write the WHERE condition including the WHERE clause, Column_Name etc.
Hope this helps.
Regards,
Manu. -
My vibraton not work plz help me
my vibraton not work plz help me
Well you do one thing!
Download the latest version of iTunes and install it! Here's the link : http://www.apple.com/itunes/download/
After you download iTunes, you connect your iPhone to the computer and sync it once. After that right click on the iPhone under the devices in the sidebar on the left and hit backup. After it's done. Hit the restore button. It will download the latest version of iOS and it's gonna take a while to download it. After download is completed, it will start restoring your iPhone with the latest iOS, it will take few minutes, and you're done installing the latest iOS in your iPhone.
This should solve your problem anyhow -
i got apple iphone 3 and i getting problem to activate that its showing message could not activate plz help me how can i activate my phone?
Most likely your phone is carrier locked to a different carrier than the SIM card you're using. It will activate and operate only with the carrier to which it's locked.
-
when ever i'm tring to install an app from the app store i'm getting the following error.
"We could not complete your purchase - The product distribution file could not be verified. It may be damaged or was not signed".
someone plz help me to overcome this.Installing the appropriate combo update may help...
If you are running v10..7 Lion, install the OS X Lion Update 10.7.4 (Client Combo)
For 10.6 Snow Leopard > Mac OS X 10.6.8 Update Combo
Then restart your Mac. Try the App Store.
If that doesn't help, try the following..
Quit the App Store if it's open.
Open the Finder. From the Finder menu bar top of your screen click Go > Go to Folder
Type this exactly as you see it here:
/Library/Preferences/SystemConfiguration
Click Go
Move the NetworkInterfaces.plist file from the SystemConfiguration folder to the Trash.
Relaunch the App Store and try downloading Mountain Lion.
You may also need to disable anti virus software and turn off the Firewall in System Preferences > Security (or Security & Privacy) > Firewall -
My iphone's setting menu is not working.plz help me
When i enter into the setting tab all the menu is not working i cant eneter to any item there or even i cant scroll down.plz help me
Try hard resetting the phone.
Hold down the sleep/wake button and the home button at the same time until the apple appears and let the phone reset itself.
Let me know if you've already tried this or if it works. -
My macbook pro is not booting, please help me :(
hello,
my macbook pro is not booting in OS X, it displays the apple logo and the spinning wheel, but a circle with a cross appears and the spinning wheel continues, please guys, help me
P.S: my MBP is boot campedWell, sometimes you can gain access to the drive from another Mac connected to your computer via Firewire cable. It's called Target Disk Mode - Transferring files between two computers using FireWire. Or you already have backups. If you don't then you should consider a backup strategy to avoid this the next time it happens.
There are too many reasons for a drive to become corrupted within the normal course of use. A most common cause is abnormal shutdowns from power outages or not using the normal shutdown procedure because of a system lockup. Software glitches happen or you may be using software that is poorly written, and on and on.
If don't have backups:
Basic Backup
Get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
Synk Pro
Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
Although you can buy a complete external drive system, you can also put one together if you are so inclined. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.) You can find enclosures at places such as;
Cool Drives
OWC
WiebeTech
Firewire Direct
California Drives
NewEgg
All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver. -
hi i installed wrong iousbfamily on osx and now my login screen is frozen, keyboard and mouse not working plz help
How and why did you install that? What steps did you take in that process. I can then help with some steps to undo them.
-
K7N2G + Athlon1700XP = no boot plz help!
hEY!
i just bought my system and i have a similar problem that lots of people had before.
When i turn my PC on (my monitor is connected to the integrated video card) there is no signal and there is no sound beeps, on the D-bracket the leds are 1-red, 2red ,3green,4green, my fan works correctly.
I tried to run it without HDD and DVD-rom did not work.
How can i get my sys. run ??
plz help!Do you have a video card to use to help in determining if it is the onboard card?.........Plz give full specs of your system including the power supply........
-
Code for radio button is not working plz help
checkboxes are working fine but when i put radio code submit button does nothing
plz help
thanks in advance
<%@ page language="java" contentType ="text/html; charset=ISO-8859-1" pageEncoding="ISO-8859-1" import= "java.sql.*,java.io.*,com.anaghan.MyBeans.CmsConnection"%>
<jsp:useBean id="obj" scope="request" class="com.anaghan.MyBeans.DepartmentBean"/>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" >
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<script language="javascript" >
function cmdOnSelect()
var deptcode=document.DepartmentPage.cmdSelect.value;
DepartmentPage.method="post";
DepartmentPage.action="./vsnlemployee_calldatasheetcallhistory.jsp?flag=select&cmdSelect="+deptcode;
DepartmentPage.submit();
function validate()
var user_etime = document.DepartmentPage.etime.value;
var etime_length = document.DepartmentPage.etime.value.length;
var user_edate = document.DepartmentPage.edate.value;
var edate_length = document.DepartmentPage.edate.value.length;
var user_calltype = document.DepartmentPage.calltype.value;
var calltype_length = document.DepartmentPage.calltype.value.length;
var user_callstatus = document.DepartmentPage.callstatus.value;
var callstatus_length = document.DepartmentPage.callstatus.value.length;
if( edate_length==0 )
alert("Please enter the call date");
return false;
else if( calltype_length==0 )
alert("Please enter the call type");
return false;
else if( callstatus_length==0 )
alert("Please enter the call status");
return false;
else if( etime_length==0 )
alert("Please enter the call timing");
return false;
else if(etime_length!=0 && etime_length!=4)
alert("Entered timing is invalid");
return false;
else if (etime_length!=0)
for (var i = 0; i < etime_length; i++)
valid_characters = new RegExp ("[0-9]", "g");
var part_user_etime = user_etime.charAt (i);
if (!valid_characters.test (part_user_etime))
alert("Special characters like '" + part_user_etime + "' are not allowed in timing" );
return false;
valid_characters = null;
return true;
else
return true;
function cmdOnClick()
if (validate())
DepartmentPage.method="post";
DepartmentPage.action="/anaghan/CallSheet?flag=call";
DepartmentPage.submit()
</script>
<script language="javascript" src="calendar1.js">
</script>
</head>
<body>
<%
String uname=(String)session.getAttribute("employeeName");
if(uname==null)
response.sendRedirect("/Error.jsp?login=Login Session Problem");
%>
<%
String date1="";
String date2="";
%>
<%!
ResultSet rs=null;
Connection con =null;
String conStr="sun.jdbc.odbc.JdbcOdbcDriver";
String tableStr="jdbc:odbc:Anaghan";
%>
<%
String companycode=request.getParameter("cmdSelect");
HttpSession hs = request.getSession();
hs.setAttribute("companycode",companycode);
System.out.println("CALLLLL="+companycode);
%>
<%
String flag="";
String deptcode="";
String commissioningdate="";
String closuredate="";
%>
<%
String a2="";String a1="";
%>
<form name="DepartmentPage" >
<TABLE cellSpacing=0 cellPadding=0 width="100%" border="0" >
<TR>
<TD align=CENTER>
<h2> CALL DATA SHEET </h2>
</TD>
</TR>
<TR>
<div>
<FONT face="Arial " color=#000000 size=2>
<TD valign="top">
<TABLE cellSpacing=15 cellPadding=0 width="100%" border="0">
<TD width="50%" vAlign="top" align=CENTER height=24 bgcolor=#F8F8F8 >
<tr>
<TD align=RIGHT>Select Company - </TD>
<td><SELECT name="cmdSelect" size="1" onChange="cmdOnSelect();">
<OPTION SELECTED></OPTION>
<%
deptcode=request.getParameter("cmdSelect");
response.setContentType("text/html");
ResultSet rs = obj.onSelect();
while(rs.next())
String tempName=rs.getString(2);
%>
<OPTION id= "a<%=tempName %>" value= "<%=tempName%>"> <%=tempName %></OPTION>
<%}%>
</SELECT></td>
</TR>
</TD>
</TABLE>
<TABLE cellSpacing=15 cellPadding=0 width="100%" border="0">
<TR>
<TD>
<table align="center" width="90%" cellspacing="2" cellpadding="2">
<tr>
<td align="center"><h2>Contact Person</h2></td>
</tr>
</table>
<table align="center" width="90%" border="1" cellspacing="2" cellpadding="2">
<tr><th>Name</th><th>Landline</th><th>Mobile</th><th>Fax</th><th>E-mail</th></tr>
<%!
ResultSet result=null;
%>
<%
response.setContentType("text/html");
try{
Connection con = DriverManager.getConnection("jdbc:odbc:Anaghan");
Statement stmt=con.createStatement();
result =stmt.executeQuery("select * from enquiry_details where companycode='"+deptcode+"' ");
while(result.next())
%>
<tr>
<OL><td align ="center"><%=result.getString(9) %></td>
<td align ="center"><%=result.getString(10) %></td>
<td align ="center"><%=result.getString(11) %></td>
<td align ="center"><%=result.getString(12) %></td>
<td align ="center"><%=result.getString(13) %></td></OL>
<tr>
<OL><td align ="center"><%=result.getString(14) %></td>
<td align ="center"><%=result.getString(15) %></td>
<td align ="center"><%=result.getString(16) %></td>
<td align ="center"><%=result.getString(17) %></td>
<td align ="center"><%=result.getString(18) %></td></OL>
<%}
catch(Exception e)
e.printStackTrace();
}%>
</tr></table>
</TD>
</TR>
<TR>
<TD>
<table align="center" width="90%" cellspacing="2" cellpadding="2">
<tr>
<td align="center"><h2>Call History</h2></td>
</tr>
</table>
<table align="center" width="90%" border="1" cellspacing="2" cellpadding="2">
<tr><th>Call Type</th><th>Call Status</th><th>Service Type</th><th>Feedback</th><th>Next Visit</th><th>Call Date</th></tr>
<%!
ResultSet result1=null;
%>
<%
response.setContentType("text/html");
try{
result1=obj.onSelectCallHistory(deptcode);
while(result1.next())
%>
<tr>
<OL><td align ="center"><%=result1.getString(3) %></td>
<td align ="center"><%=result1.getString(4) %></td>
<td align ="center"><%=result1.getString(6) %></td>
<td align ="center"><%=result1.getString(7) %></td>
<td align ="center"><%=result1.getString(9) %></td>
<td align ="center"><%=result1.getString(8) %></td>
</OL>
<%}}
catch(Exception e)
e.printStackTrace();
}%>
</tr></table>
</TD>
</TR>
<TABLE cellSpacing=15 cellPadding=0 width="100%" border="0">
<TD width="50%" vAlign="top" align=CENTER height=24 bgcolor=#F8F8F8 >
<TR>
<TD></TD>
</TR>
<TR></TR>
<TR>
<TD align=RIGHT>
Type of Call - </TD>
<td>
<input type = radio name=calltype value=personal/>personal
<input type = radio name=calltype value=email/>Email</td>
<!-- <TD><SELECT name="calltype" size="1" >
<OPTION SELECTED></OPTION>
<OPTION id= "s" value= "personal"> Personal </OPTION>
<OPTION id= "s" value= "telephonic"> Telephonic </OPTION>
<OPTION id= "s" value= "email"> E-mail </OPTION>
<OPTION id= "s" value= "meeting"> Meeting </OPTION>
</SELECT>
</TD>-->
</TR>
<TR>
<TD align=RIGHT>
Status of Call - </TD>
<TD>
<SELECT name="callstatus" size="1" >
<OPTION SELECTED></OPTION>
<OPTION id= "s" value= "cold"> Cold </OPTION>
<OPTION id= "s" value= "warm"> Warm </OPTION>
<OPTION id= "s" value= "hot"> Hot </OPTION>
<OPTION id= "s" value= "closed"> Connection Executed </OPTION>
<OPTION id= "s" value= "upgrade"> Upgrade </OPTION>
<OPTION id= "s" value= "downgrade"> Downgrade </OPTION>
<OPTION id= "s" value= "shiftingoflocation"> Shifting of Location </OPTION>
<OPTION id= "s" value= "connectionterminated"> Connection Terminated </OPTION>
</SELECT>
</TD>
</TR>
<TR>
<TD align=RIGHT>Date - </TD>
<TD><input type="text" readonly name="edate" id="edate" size="10" value="<%=date1 %>">
<img src="./cal.gif" width="16" height="16" border="0" alt="Click Here to Pick up the date">
</TD>
</TR>
<TR>
<TD align=RIGHT>
Time - </TD>
<TD><input type="text" size="4" name="etime" maxlength="4"></TD>
</TR>
<TR>
<TD align=RIGHT>
</TD>
<TD>(Write timing in 0000 - 2400 in this format only)</TD>
</TR>
<TR><TD align=CENTER> INFRASTRUCTURE DETAILS
</TD></TR>
<TR></TR>
<TR>
<TD align=RIGHT bgcolor=#00CCFF>
<font color="#CC6600" size=4>Details of service </font></TD>
<TD></TD>
</TR>
<TR>
<TD align=RIGHT>
Circuit Specification - </TD>
<TD><SELECT name="servicetype" size="1" >
<OPTION SELECTED>---Services---</OPTION>
<OPTION id= "s" value= "IPLC"> IPLC </OPTION>
<OPTION id= "s" value= "VPN"> VPN </OPTION>
<OPTION id= "s" value= "ILL"> ILL </OPTION>
<OPTION id= "s" value= "VoIP"> VoIP </OPTION>
<OPTION id= "s" value= "ISDN"> ISDN </OPTION>
<OPTION id= "s" value= "IDC"> IDC </OPTION>
<OPTION id= "s" value= "V-IPLC"> V-IPLC </OPTION>
<OPTION id= "s" value= "contactcenter"> Contact Center </OPTION>
</SELECT>
</TD>
</TR>
<TR>
<TD align=RIGHT vAlign=TOP>
Feedback Details - </TD>
<TD><TEXTAREA wrap="virtual" name="feedback" rows=5 cols=30 MAXLENGTH=100></TEXTAREA></TD>
</TR>
<TR>
<TD align=RIGHT>Next Visit Scheduled - </TD>
<TD><input type="text" readonly name="nextvisit" id="nextvisit" size="10" value="<%=date2 %>">
<img src="./cal.gif" width="16" height="16" border="0" alt="Click Here to Pick up the date">
</TD>
</TR>
<TR></TR>
<TR>
<TD></TD>
<TD>
<input type="button" name="bill" value="SUBMIT" onClick="cmdOnClick();">
<input type="reset" name="reset" value="RESET" >
</TD>
</TR>
</FONT>
</div>
</TD>
</TR>
</TABLE>
</TD>
<TD vAlign=TOP bgcolor=#FFFFFF>
</TD>
</TR></TABLE>
</form>
<script language="JavaScript">
var cal1 = new calendar1(document.forms['DepartmentPage'].elements['edate']);
var cal2 = new calendar1(document.forms['DepartmentPage'].elements['nextvisit']);
</script>
<script language="javascript">
document.getElementById('a<%=request.getParameter("cmdSelect")%>').selected=true;
</script>
<BR><BR>
<jsp:include page="index-end.jsp"/>
</body>
</html>If the reset doesn't work, you have to force iPad into Recovery Mode
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
My Iphone4 will turn off, and it is not on, plz help how to switch on or what is the problem
Hi,
My iphone 4 will turn off on its own and It will not turn on, plz help meTry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Me taskbar icons are not responding. plz help
my taskbars icons are not responding when i click on it...ie it doesnt opens not it responds....
alo like back button which is on upper panel is also not responding...is this any software error or hardware... plz help seriously.... i cant even call any1....Windows or Mac OS X?
-
Plz help my ipad mini is just bringing the apple logo again and again and it is not working plz help
plz help my ipad mini is just bringing the apple logo again and again and it is not working plz help
If the reset doesn't work, you have to force iPad into Recovery Mode
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
My subscription not renewed. plz help
My subscription renewal date was yesterday. but till now it has not been renewed. plz help. i need to make calls. . ..
metty3 wrote:
My subscription renewal date was yesterday. but till now it has not been renewed. plz help. i need to make calls. . ..
I think you may need to contact customer service regarding that matter.
https://support.skype.com/en/faq/FA1170/how-can-i-contact-skype-customer-service
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES -
Ibook will not boot PLEASE HELP!!!!
Hi,
First the ibook booted then would come up with the kernel error: square box with "you need to restart your computer. Hold down the power button for several seconds or press the restart button......
I then booted to single user mode and ran fsck -y which eventually came up with the all clear "The volume Macintosh HD appears to be OK"
I then restarted the system which booted to the blue screen with some quirky graphics towards the top. It will now not boot into single user mode, just black screen or multi-coloured stripy screen. When booting from the CD drive the sceen is just blue or black.
Okay, I have connected the ibook via fire wire to a powerbook, and re-booted the ibook in terminal mode which brings up the fire wire connect symbol on screen.
After a while the system stalls showing part of the symbol and the connection is frozen. I have tried to re-install tiger using the powerbook to initiate as the ibook will not. However, it freezes at 50% of install.
I changed the ram to iliminate a ram failure, however... still the same.
While I was in terminal mode I erased the disk using the disk utility from the PB and then ran the install again... still froze.
This looks more serious than I thought. I'm now thinking that it could be the hard drive or worse. I have tried to use the apple support phone # and it does not seem to work, 1800 275 2273.
I'm having some real bad luck here. Any ideas?I ran the apple hard ware test disc. The quick test found no errors. The extended test freezes up completely. Now I'm really stumed. The logic board came up with know errors.
When the system froze on the extended test. I falsed a re-boot. However the screen went black so I could not run the test again. It seems like a time thing... the ibook can only run for a short period before it freezes. Then it has to shut down for a while before it can run again
Maybe you are looking for
-
Hi Gurus, Can anybody help me how to create Substituion rule for copying line item text for line items... plz give all the steps which r required. Thanks in advance. Regards, siva
-
Email sent with attachments not showing in sent folder
I have recently found that emails I send with an attachment do not show up in my sent folder. They are arriving at recipient but I do not then have a record of the email sent. This is really very annoying and I can see a few other poplin online foru
-
Auth_password blank when it shouldn't be
Why is the cgi variable auth_password coming up blank? This is on CF 10. I have debugging information turned on and can see all of the cgi variables and it correctly shows the username and authentication type (I have it set to Basic Authentication
-
HI B2B gurus, We send one PO to our trading partner,it successfully received by them but they havn't send MDN, in out B2B console, until 2 hours it showing as state =waitack, after 2 hours, it was errored out "Message retry count for the message has
-
Portege R700 -- disabling Intel AMT in BIOS causes fan to run constantly
I recently purchased a Portege R700-1321, which shipped with BIOS 1.40. I'm running Windows 7 Pro x64. I have attempted to disable Intel Active Management Technology (AMT) on this machine by going into the ME BIOS (via ctrl-P at bootup), setting an