BIOS not installed? Devices not Found?

Pentium 4 3.0GHZ
Kingston 2x512 Dual channel
420 Watt power supply
80 Gig maxtor Hardrive
When the system boot up I get a message stating:
Devices not found
BIOS not installed
I have no problem getting into the BIOS settings and making changes except the ratio for the CPU is Locked which I also can seem to unlock.
Other then that my system runs fine and Windows XP work.
I know the system is running at 200x15 because the Core Center.
Any ideas about the BIOS or the LOCKED issue.

itve told you in the bios section allready

Similar Messages

  • BIOS not found?

    Hello, I just assembled my new computer. When I boot up, it immediately searches for "devices," and then it says "BIOS not installed."
    Anyone care to help?
    Athlon 64 3000+
    MSI K8T-Neo FIS2R
    2x 512 MB DDR400
    ATi Radeon 9500 Pro
    WD 7200 RPM 40 gb HD

    Quote
    Originally posted by Cozman
    sowwee but i tell it to save and other settings stick so i assumed that one did ... also says its disabled when i go back to bios ... but it still looks for drives and says no bios loaded ... ill get winXP installed and see if liveupdate has a bios update that fixes it if u have no other suggestions
    thats assuming windows will install ... it just froze on first attempt  
    Worked for me.

  • Bios not installed, device not found

    I'm sure someone can answer this, but I can't. When booting, I get the message "bios not installed" and "device not found." Now, I know it doesn't pertain to the actual bios, but what exactly does it mean? And how do I get rid of the message?
    AMD 3000 64
    msi k8t NEO-FIS2R
    Hitachi SATA 80gb (using via controller, not promise)
    POWMAX 400
    Diamond GF5200 128MB AGP
    Kingston 2.5latency 512 (256x2) ddr400
    Also, I built an ASUS version, not 64 but still AMD 3000, everything else is pretty much the same, and the Asus build smokes the MSI build. Anyone have an idea why?
    ASUS deluxe a7n8x-e
    CORSAR32X64 VS256MB400
    HD 80GB Hitachi SATA 8MB
    ALBATRON GeForce 128MB FX5200EP
    ASPIRE XDREAMER BK WNDW 350W

    Quote
    Plain and simple, it sucks.
    3dmark 2001 se scores with a Barton-core AMD athlon xp 3200+ and 1 GB ram.
    GeForce FX5200 A-FX20 128MB DDR
    4,650
    BFG GeForce FX 5200...2500+ XP Barton with 1GB PC2700 I get 5361.
    Gainward GeForce FX 5200...AMD64 3200+ with 1GB PC3200 I get 8286.
    They don't suck that bad...not like the GeForce4 MX400s...  

  • Boot device not found - Please install an operating system on your hard disk

    Trying to boot up this morning gave this error message:
    "Boot device not found
    Please install an operating system on your hard disk
    Hard Disk <3F0>
    F2  System Diagnostics"
    Pressing F2 brings up to  the "HP PC Hardware Diagnostics UEFI" page, where its shown:
    "Version 1.6.0.0 - BIOS
    Fore more info please visit www. ... ...
    Memory Test
    Hard Drive Check
    Language
    Exit"
    Tryied the HD check but it says:
    "SMART Check : Not installed
    Short DST : Not installed
    More details:
    No bios upgrade was made, never, only a big updating of Windows yesterday.
    Could someone kindely help me out please?
    Thanks, Perry G.

    Hi,
              The above error message shows that the Hard disk drive is failed on your unit. You have to replace the Hard disk drive and reinstall the OS.
    To order parts click the below link
    https://h20141.www2.hp.com/Hpparts/Default.aspx?mscssid=FA59F7C7DCAC4237B498C91D0507A761
    To order Recovery disk click below link
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&dlc=en&lc=en
    "I work for HP."
    Please click the "White Kudos" star to say thanks for helping.
    Please mark "Accept As Solution" if my help has solved your problem.

  • HP Pavilion dv-4087CL Notebook receiving : Boot Device Not Found-Please install an operating system

    My Duaghter is out of the country studing abroad.  Her PC would no longer boot up so she took it to a support shop. They replaced her hard drive, fixed an over heating issue and reloaded her PC.  Now she is getting this new error message and she is desparate to get this fixed.  We have owned this PC for only 2 years. I am sure it is out of support.
    HP Pavilion dv-4087CL Notebook receiving : Boot Device Not Found-Please install an operating system on your hard disk.
    She took it back to the support shop and they upgraded her bios, but that did not fix the error message.
    Please help!  What can she do  now.

    Hi:
    Normally that means the hard drive failed.
    I know it was replaced but maybe the replacement drive went out too.
    There is a hard drive diagostics tool your daughter can run in the BIOS.
    I suggest she run it (enter the BIOS by tapping the F10 key as soon as she sees the HP welcome screen).
    Then once in the BIOS, there should be a diagnostics menu..one for memory and one for the hard drive.
    She should select the hard drive diagnostics application and see what it reports.
    Then go from there based on what is reported.
    Paul

  • My screen says boot device not found. Please install an operating system on hard drive,

    My screen says boot device not found. Please install an operating system on hard drive. What could have caused this problem? Help!!!!!

    Hi,
    Can you post back with the following.
    1.  The full Model No. and Product No. of the notebook - see Here for a further explanation.
    2.  The full version of the operating system you are using ( ie Windows 7 32bit ).
    3.  Shut down the notebook.  Tap away at f10 as you start the notebook to enter the bios menu.  Under the Advanced or Diagnostic tab you should find the facility to run a test on the Hard Drive.  Post back with the details of any error messages.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • BOOT DEVICE NOT FOUND - PLEASE INSTALL AN OPERATING SYSTEM ON YOUR HARD DRIVE

    HP G6-2212SA LAPTOP ( 2 YEARS OLD) BLACK - WINDOWS 8
    I HAVE RUN THE MEMORY TEST PASSED
    RUN THE HARD DISK QUICK CHECK - PASSED
    RUN HARD DISK EXTENSIVE TEST - PASSED
    I HAVE BOUGHT A NEW HARD DRIVE, INSTALLED IT AND RUN ALL THE SAME TESTS WITH ALL THE SAME PASSED RESULTS. I BELIEVE THAT THE PROBLEM IS NOT THE HARD DRIVE, SO I HAVE TAKEN THE NEW ONE OUT AND PUT THE OLD ONE BACK IN, AND HOPEFULLY BE ABLE TO GET A REFUND IF I SEND IT BACK.
    I HAVE FOLL0WED INSTRUCTIONS ON THIS FORUM TRIED MOST THINGS STILL GET THE SAME MESSAGE.
    I HAVE BOUGHT A WINDOWS 8 RECOVERY DISK OFF EBAY, TRIED IT SEVERAL TIMES AND DIFFERENT WAYS BUT WILL NOT LOAD UP
    PLEASE HELP AND ADVISE AS IM IN A DELEMA
    DARREN

    Hi @Darren104
    Welcome to the HP Support Community. I saw your post regarding the Boot Device not Found error message. This HP document Resolve Boot Device not Found Error Message will show you how to reset your BIOS. This will force the BIOS the look at the hardware and it might see your new hard drive. Another reason that it might not be seeing the hard drive is because there is no bootable operating system on the hard drive. You might need to look at taking it out and installing an operating system on it via another computer.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Boot Device Not Found, Please install an operating system on your hard disk, Hard Disk (3FO)

    Hey
    i am having this Error Message "Boot Device Not Found, Please install an operating system on your hard disk, Hard Disk (3FO)", While UEFI mode is enabled from bois but in Raid menu Both my hard Drives 1TB and SSD are Showing and I run the  F2 System Diagnostics Test and it became as passed. In UEFI mode its not even showing my USB when i attach it for Window install But when i enabled the Leglacy mode it detteced my USB and also let me install my Windows and every thing seems to work fine. Updated the bios still Error is there.
    Error Message only shows up when I disable the Leglacy mode.
    So where is the Problem ? hard drive seems fine because these are working on Leglacy mode enabled.
    Laptop Model : HP Envy Dv6-7211tx
    Hard Drive : 1Tb and 32GB SSD

    Hi Saifullay, sorry to hear that you are having issue with your Envy Dv6-7211tx.  I have done some research and I have found a document that will assist you with this issues. Please click the link that I have provided to get to the document.   http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01443463  
    If this does not resolve the issue, please feel free to write back . I would like to also apologize for the delay and the inconvenience that you have had to deal with.
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • HT1926 Installing iTunes 11.1.4 on windows XP issues warning message: Service "Apple Mobile Device' failed to start. starting iTunes shows MSVCR80.dll not found.

    Normal update of iTunes to 11.1.4 fails. Suggests installing from web site
    I install from iTunes.com. Install issues the messages:
    Service "Apple Mobile Device' failed to start.
    Verify that you have sufficient privileges to start system services
    I do have necessary privilegs. I hit ignore. See window with successful install come up and finish with launch. I get the messages:
    iTunes was not installed correctly.
    Please reinstall iTunes
    Error 7 (Windows error 126)
    Tring to start iTunes from desktop gives:
    This application failed to start because MSVCR80.dll was not found
    Re-installing the application may fix the problem.
    Further repair or remove/reinstall does not fix the problem (including after reboot)
    Thie is the first time this has happened. I'm not sure where to go from here
    Thanks for any help.

    Earlier suggestion worked. That is, Use software add/remove to delete all 5 iTunes applications:
    Apple Application Support
    Apple Mobile Device Support
    Aple Sortware Update
    Bonjour
    iTunes
    Reboot and install/

  • My probook says:Boot device not found Please install an operating

    My Notebook says:Boot device not found
    Please install an operating system on your hard disk
    Hard disk (3FO)
    F2 system Diagnostics
    for more info please visit: www.hp.com/go/techcenter/startup
    I was used HDD Seft-Test Options, it say "Hard Disk Passed". But i try to turn on notebook but fair: Boot device not found.
    Is HDD died?
    Please help me, thanks so much!
    Sory my english bad.
    This question was solved.
    View Solution.

    Hello hungvocam 
    Thanks for posting on the HP Forums!
    I understand you are experiencing an issue with your notebook. However, since this is a commercial notebook, you should post your issue on the notebook board of the HP Enterprise Forums for a better answer.
    Thanks and have a great day!
    Mario
    I worked on behalf of HP.

  • My lap top says boot device not found please install an operating system on your hard disk

    I was on yahoo and page froze. I hit alt/ctrl/delete and nothing happened. I then hit ctrl/esc. I now have a screen saying boot device not found. please install an operating system on your hard disk. hard disk (3FO) What did I do wrong? this is a Compaq presario CQ56-112 NR Notebook Windows 7
    This question was solved.
    View Solution.

    I would suggest going to the following link and going through the listed troubleshooting steps based on your symptoms:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01443371&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us​...
    I am an HP employee.
    Please post rather than sending a Private Message. It's good for the community and I might not be able to get back quickly.- Thank you.
    Please click the White Kudos star on the left to say thanks.
    Please mark Accept As Solution if this resolves your issue.

  • Boot Device Not Found. Please install an operating system on your hard drive. Hard Disk - (3F0)

     Model HP-G72-257CL. Purchased new Operating System & Hard Drive from HP.  Error message Boot Device Not Found popped up after attempting to  installing hard driveon laptop

    RonDNor wrote:
     Model HP-G72-257CL. Purchased new Operating System & Hard Drive from HP.  Error message Boot Device Not Found popped up after attempting to  installing hard driveon laptop
    Hi,
    Try this first:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443463&lc=en&dlc=en&cc=us&product=4308966#N16...
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • "boot device not found. please install an operating system on your hard disk error on Dm3 1030us

    Hi
    I have the following computer:
    name: hp pavilion Dm3 1030us
    serial number: {Removed for privacy}
    product number: VM073UA#ABA
    when i boot up my laptop it says "boot device not found. please install an operating system on your hard disk."
    this laptop does not have a cd drive but I do have a external one. since it does not have a cd drive therefore they didnt give me a recovery cd.
    It had Windows 7 on it.
    Is there a way to get the issue resolved

    You would have to call in to HP tech support ( 1-800-HP-INVENT) and have them order you some RCD's.
    I work for HP.
    Please click the White Kudos star on the left to say thanks.
    Please mark Accept As Solution if this resolves your issue.

  • Installing update resulted in error message MS VCR80.dll not found, Apple mobile device failed to start

    Can you help with error message on installing itunes on Windows XP: error message MSVCR80.dll not found.  Apple Mobile Device failed to start.  Error 7 Windows error 126.
    Deleting itunes and reinstalling does not fix it.

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • I did the recommended re-install to resolve the missing MSVCR80.dll file. This worked, but I am now stymied by two error messages: "Apple Mobile Device failed to start" and "Apple application support not found". How to overcome?

    That worked, however I now get two error messages when I install I Tunes:
    o  Apple Mobile Device failed to start.
    o  Apple Application Support not found.
    This were of course deleted in the recommended re-install procedure to resolve the dll file, but repeated uninstalls and installs simply bring up these two error messages with a recommendation to install I Tune again. Installing the new I Tunes version seems to be problematic per the discussion groups and has no simple solution. SHould not the Genius bar be able to resolve this at an Apple Store? Want to buy a new I Phone 5S, but this problem effectively stymies this.

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

Maybe you are looking for

  • Adding columns in SF

    Dear all, During modifications in smartform I have to add 2 more columns in the main window ,which already consists of 6 columns ,whether it is possible to alter the column width (as: 1 cm , 2 cm , 07 cm , 2.75 cm ,2.33 cm,and 3.06 cm as of total 18

  • FM for idoc

    is there any Function module  which takes the NAST entries  as input and gives the idoc no as ouput. input should be delivery no and output should be idoc no for tht particular delievry no

  • Query need for following question

    ORD : ORD_ID ORD_DATE CUST_ID ORD_TOTAL CUST : CUST_ID CUST_NAME CITY Quest: ORD_ID either less than 10 or greate than 50 also ORD_TOTAL >5000 ?

  • CRL verification on Cert Auth Module .... not working?

    Hi there I've been trying to configure my Cert Auth module on AM7.1 to do CRL verification of the certificates being provided to authenticate. My question is : I don't think it is working and I can't find anywhere documentation on how to make it work

  • Cannot set the email from address (reply-to) in SharePoint Designer workflow

    I have created several workflows for custom lists. Among other actions, they send out emails. It appears however, that they all use the same from-address. I would like to supply each of these workflows with different reply-to addresses. Can I do that