"BIOS not installed" error message.God help me!

Greeting all. I was so damn exited about getting this NEO875P-FI2SR board. I am beginning to wonder if the effort will ever be rewarded. Got everything plugged up tonight and fired it up and it says "BIOS not installed". I reset CMOS a couple of times and loaded the default set of parameters in the BIOS setup. Same stuff. I have been searching the forum fo other folks that have had this same issue, but no luck. Has anyone had any experience with this particular error message? Thanks guys.
Sam

I don't have your motherboard, but I have a question
Is the BIOS NOT INSTALLED message you are getting being showed after it displays FASTRACK.
Also does your computer still start Windows ??????
If so, then the message you see you do not have to worry about, I think it has something to do with RAID and no devices connected to it.

Similar Messages

Question: i upgraded to Lion and now itune upgrade will not install (error message appears)

i upgraded to Lion and now itune upgrade will not install (error message appears)

iPhoto needs to be upgraded in order to work with Mavericks. You can do that via Software Update or the App Store.
The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.
Upgrading iPhoto does not involve your iPhoto Library. Your photos will still be there. But it never hurts to make a backup first.

Bios not install error and Raid Configuration not showing physcial HDD in Lenovo

Is this a SATA hard drive by any chance? Sounds like you have an Adaptec SCSI controller, but no hard drive attached to it. Are you booting an install DVD of some sort?

Bios not install error and Raid Configuration not showing physcial HDD in Lenovo RD 120 Server (New)
updated bios still same error
and at array configuration it is not showing any hard disk
hard disk utility it is showing hard disk
we are trying to install OS with single hard disk in Lenovo RD 120 Server
This topic first appeared in the Spiceworks Community

RE: : "AEC-6880 BIOS not install" error - fixed for me.

To anyone receiving the POST error : "AEC-6880 BIOS not install" on a 645Max2, my problem was a dead Maxtor Plus9 disk.
Both disks in the mirror array were brand new 80GB parts, within three days i was getting the BIOS not installed error instead of the Acard utility telling me one of the disks was bad. Pretty major ehh?!!
I removed the dead disk and managed rescue the data from the working disk, so don't reformat them before you've checked that both disks are good!
Hope someone out there finds that useful.
Ben

Welcome to the Club! Got the same Problem and had a really hard time reaching the Customer Support because they were down due to maitenance! Just wrote to their experts chat and hope to get an answer in this life!
I tried to authorize my Computer and eBookreader with a new Adobe-ID, but it says I've done used this ID too often, even though it was brandnew! Can't copy my just-purchased eBook because "Copying is not allowed".
I hold my thumbs for you that Adobe solves this Problem fast enough. Other ways I'll sell my eBookreader and buy the Kindle-Reader from Amazon and say GOOD BYE to Adobe!

Project not installed error message. What does it mean?

Why do we get a project theme not installed error massage when using iDVD?

Probably because the themes are not installed or iDVD has broken the link to the themes' location. Check in the HD/Library/Application Support/iDVD folder to see if the themes are there. If not then check in your ~/HD/Library/Application Support/iDVD folder. If they are there then copy them into the HD/Library/Application Support/iDVD folder. Repair disk permissions and reboot.
If that doesn't help you'll have to reinstall iDVD from the disk it came on. To do so you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder,
Click to view full size
Then install iDVD from the disk it came on originally and apply all necessary updaters.
OT

Lightroom 5.3 will not install, error message saying it cannot find x64.msi

I am not a cloud cc member, just cs6, downloaded lightroom from the lightroom page, it is not listed in my cloud application
I get the following error message.The feature that you are trying to install is on a network resource that is unavailable. Check ok or try an alternative pathway to a folder containing the installation package, Adobe-Lightroom-64.msi.
Any help would be appreciated.
Thanks

I get this to when trying to install from CC or standalone, thing is i have cleaned my C:\ drive since all apps tend to install crap there, it is
a 115 gig ssd and i am down to 11 gig free, i removed a lot of stuff including some uninstall info that eats a lot of space.
But where does the installer find the information? i have searched and deleted every mention of lightroom in the registry, god that was a lot,
Still the old version is deleted from the disk with extreme prejudice is there no switch that makes it ignore any old versions and install anyway?

ITunes will not install, error message.

So, last week my itunes update download the lastest version of itunes. When I went to click on the itunes icon to went to install.
It gave me the error message "the installer has insufficient privileges to modify this file c:\program files\itunes\ituneshelp.resources\es.lproj\ituneshelperlocalized.dll"
Since then I have tried various solutions to similar problems listed here and other sites, including turning off the user control, unpacking the installer and installing the various parts separately, downloading older versions of itunes, removing all other apple components, installing Quicktime and then installing iTunes, etc.
Every time I get through a good part of the process and I get the same error message "the installer has insufficient privileges to modify this file c:\program files\itunes\ituneshelp.resources\es.lproj\ituneshelperlocalized.dll"
I'm about to give up... someone please help!!!

Looking through some other posts I found a solution. Go on the web and download iTunes only, do not automatically install. Then, install the file and when it askes you the destination, change the folder name (I just added a 2). iTunes then installs and all of you songs, playlists, etc. are there.

ITunes install error message, please help!

I have had ITunes installed on my laptop since before Christmas. This week I started getting a pop up message saying "ITunes was not properly installed, etc." Is there any easy way to fix this problem or do I need to uninstall and reinstall? If I go the un/reinstall route, will I lose all loaded and purchased music? Also, how to I keep my IPod from losing all the songs on it when I reconnect it for the first time? Thanks for any help!

hi floyd!
ITunes was not properly installed, etc."
what's the precise text of your error message? (there's a couple of different ones i'm thinking of that you might possibly be getting.)
love, b

'Wi-Fi: Hardware not installed' error message, as if no modem

I am using a MacBook Air 13" late 2013 with Yosemite. I am not at home but have a valid working wifi network available in a University. Suddenly my internal modem is not recognised. What to do?
'Wi-Fi: Hardware not installed' is the error message as if it is not found.

In some cases, this issue is caused by a hardware fault. A loose connection, a short circuit, or a microscopic break in a solder joint may open and close depending on temperature, making the failure intermittent.
Test after taking each of the following steps that you haven't already taken. Back up all data before making any changes.
1. If you can connect to the Internet via Ethernet, Bluetooth, or a USB network device, make sure all available OS X updates are installed. If Wi-Fi is your only means of network access, skip this step.
2.. There are a few reports that the problem was solved by unchecking the box marked
Wake for Wi-Fi network access
in the Power Adapter tab of the Energy Saver preference pane. I can't confirm.
3. Reset the NVRAM.
4. Reset the System Management Controller.
5. Start up in Recovery mode. In the menu bar of the OS X Utilities screen, there's a Wi-Fi menu. Try to connect. If it works, select Install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
6. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Quicktime not installed error message upon installation of Itunes

HI,
I have Quicktime already installed (7.7 1680.34) and I have Itunes (10.4.0.80). Now when I seek to update to the latest Itunes I receive an error message saying 'Quicktime not installed' and then it stops the installation. Same thing happens after reinstallation of Quicktime. -What to do now?
//J Sundberg

Try removing QuickTime from Control Panel before installing iTunes 10.4.1.
Check out this Apple document, if you need a walkthrough of uninstalling from Control Panel -> Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Make sure you read the detailed steps, if you run in to a problem.

ITunes will not install, error message "could not access network location"

I just got a new iPod Classic for Christmas but I have an older Mac so I was going to use an extra PC that we have laying around the house but every time I try to install iTunes, I get this Error:
Could not access network location \\S090100\d$\Data.Backup\C09010009-FDR\My Documents\My Pictures\.
It does not have Error 1606 anywhere on it and it asks me if I want to Retry or Cancel. I have tried EVERYTHING, please help!!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

ITunes WILL NOT install-error messages 1714,1603

I have attempted to install Itunes (various builds) and keep receiving the same error messages...1714 (older version of ITunes can not be removed)immediately followed by error 1603.
I have read every message regarding installs and have attempted to install QT on its own and then attempt to install Itunes, (no dice), uninstall and remove all references to ITunes and QuickTime in the registry (still no soap) and also use Windows Installer Remover (AND STILL no results).
I have a $400 IPod that I cannot use since I can't install Itunes.....any suggestions?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Itunes will not install error message 2

I keep getting some message about something, it then rolls back, carries on, then comes up with error message 2 at the end.
Tried uninstalling and re installing, tried installing apple applications support manually, tried to edit the stuff in the registry which worked....until i plugged my phone in then itunes said my phone wasn't compatible, told me to uninstall and re install, I uninstalled and then it's back to square one, won't install again.
I don't know what else to do because all the solutions offered on here i've tried about 40 times.
Getting really fed up - this should be a simple process, not something that takes 4 hours and still isn't working.
Sort it out Apple!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

My iTunes will not open, error message 13014, help!

My itunes will not open on my Macbook Pro, everytime I try it says error message 13014, what does this mean? Thank you!

Hold the option key while starting iTunes and create a new library. Does it start now? If so, it's something to do with your library file. Is there anything we should know about your computer such as you keeping your library on a NAS?

"Audio File "Recording#27.aif" not found" Error Message- Please HELP!

Hi Everyone-
I was opening a podcast today to finish editing it and I got this error message, "Audio File "Recording#27.aif" Not Found" - and, naturally, when I opened the project, half of a phone interview was missing (or, rather, it shows up as purple balloons but each one says "File Not Found" inside). This file is the audio from the interviewer (the interviewee file is totally fine, as are all others in the podcast). When I load the project it asks if I want to search for this missing file, but when I click yes it says that it can't be found.
How can I find this file? What happened to it? Thank you for any ideas, suggestions, etc. For reference, I'm using GarageBand 3.0.4 on a MacBook Intel Core Duo 2Ghz and Mac OS X 10.4.11

no, GB wouldn't delete anything on it's own. it only deletes files for which you've deleted the entire region from the timeline and then saved
if the file is not within the projects, i'm afraid it's gone, and i can't think of any way that could happen by itself B-(>
Well i guess I should warn others that copying and pasting is very dangerous stuff! I had two podcasts- in podcast #1 GB saved the interview file as "Recording#27.aif" and in podcast #2 GB saved a little intro clip under the same name. When I pasted the intro clip from podcast #2 into podcast #1 my interview disappeared. I didn't delete it- I was never asked about it, I didn't delete the region from the timeline, etc. I have to assume that since they had the same name, GB thought I no longer needed the "Recording#27" from podcast #1 and now I can't find it anywhere! If anyone has any suggestions as to how I could find this file I would be very appreciative.

"BIOS not installed" error message.God help me!

Similar Messages

Maybe you are looking for