Bios not showing speed

i was overclocking my winchester this weekend and when going over 255fsb, in the bios, in the cell menu it would not say the speed or the mem frequency, like it would be odd thing like 0.05 or something i don't remember well. anyways it booted into windows well, cpuz got the right speed so did clockgen, but i'm just wondering why it doesn't show up right inthe bios?
do you guys have any idea why this might happen?
specs
k8t neo2 F
3200+ 939
2*512 ddr400

Quote from: Tiresmoke on 09-August-05, 00:41:44
Now if they just had the oddball deviders put in I would be happy.
i agree

Similar Messages

Download window does not show speed

What happened to the download speed that used to show up in Snow Leopard? Sometimes the speed shows up for a second or two, but mostly it is not there.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can try to reset the preferences to see if that helps.
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

FastTrak BIOS not showing up on boot

I have the K7N2G-ILSR with bios ver. 1.9. When I boot the computer I no longer get the screen where it says:
"FastTrak 376 (tm) Bios Version 1.00.XX
(c) 2002-2005 Promise Technology, Inc. All Rights Reserved.
Press to enter FastBuild (tm) Utility.... "
I used to get this screen before Windows XP boots, but I tried doing a modded bios and my computer wouldn't boot. So, I had to buy a new BIOS chip from BadFlash. As far as I know everything else seems to be working fine. Please help me out with this one.
jon

I've got a similar problem. I had one WD200GB SATA drive installed, striped in RAID array 0, and functioning perfectly for weeks. Today I came back to the computer and the whole machine was locked up for no clear reason. I rebooted and forgot about it. Later on I went to browse for something on the drive and it was gone! My boot drive is actually an IDE drive.
I don't get the entry to FastBuild screen on boot (where you can press Ctrl-F). The WinXP Promise FastTrak 376/378 Controller appears in the WinXP Home Device Manager, and claims to be working correctly.
I've installed the latest motherboard driver, system drivers (including Promise RAID).
If anyone can add anything that might help me out, I'd be ever grateful. There's some data on the drive that I really need. Damn you Murphy.
Tim

Installed a RAID card in my Dell Inspiron 3847. However, the RAID BIOS does not show up and I cannot install Windows 7 to it.

That is basically a summary of the problem The Dell Inspiron 3847 does not come with RAID, so I tried installing a PCI-express 1x RAID card. However, the RAID BIOS never shows up. The HDDs show up when I install the RAID controller driver in Windows 7 setup, but I cannot install Windows 7. I am using an IOCrest SY-PEX40008 RAID card with a Silicon Image Sil3124 chipset.
I tried pressing the hotkeys for the RAID BIOS listed in the card's manual, but it seems to just cause bootup to freeze. BIOS also does not seem to detect the RAID card HDDs as boot options.

%AppData% is the name of an environment variable.
On XP that variable points to C:\Documents and Settings\<user>\Application Data\
"Application Data" in XP/Win2K and "AppData" in Vista/Windows 7 are hidden folders, use %APPDATA% in the File name field
See http://kb.mozillazine.org/Show_hidden_files_and_folders
You can use Help > Troubleshooting Information > Profile Directory > Open Containing folder
See also [[Using the Troubleshooting Information page]]

My Lacie Big Extreme Hard drive does not show connection speed

*My Concern*
Hi I have a Lacie Big Extreme Hard drive, which although works fine is not showing its connection, shows up in the system profiler as 'Connection Speed Unknown'. -Should I be worried? I have other drives connected to my G5 Dual 2 gig machine and no problem their they all show their connection speeds.
*Other Firewire 'Unknown Speed connection' related Problem*
I had a DVD LaCie Dual layer portable Firewire drive which recently suffered from the same problem and I had to send it back. This was due to it slowly developing a fault of not being able to burn dual layer disks properly.
*What I have done to try and remedy the situation.*
I have been able to do the following but I am afraid with no change in the system Profiler;-
1 Trashed the whole system and rebuild
2 repair my permissions
3 empty out all my caches with OnyX (third party app) version 1.8.5
4 Disconnected all drives and reconnected them one by one to see if there are any anomalies within the system
5 switched my G5 off removed the plug from the wall waited 30 sec for it to reset itself this was the 1st attempt. On my 2nd attempt I then cold booted the machine and reset Pram settings
6 used Tech Tools Pro 4 version 4.1.2
7. Replaced Power supply of the offending unit (didn't have to but I wanted to be safe and eliminate this fronm the equation.
9.tried changing around the order in the chain to which the drives were connected to the G5but alas no joy!
Summery
So my concern is if a device which is Firewire shows up in the system profiler as connection speed unknown should I begin to worry even though it appears to be functioning.
Thank you ahead of time for any help on this matter
*Supporting evidence*
Please see below a shot of my System profiler so you can see what I mean:-
*(Important Note)*
The Lacie Big disk has 800/400 Firewire connection speeds I have connected it straight to my G5s firewire 800 port then daisy chained the LaCie's via its other 800 port to the two other 800 Firewire Hard drives.
When the LaCie DVD DL drive was connected, I connected it straight to the 400 firewire port. As it needed direct access to the G5 for it to function optimally.
*System Profiler Info under OSX Tiger 10.4.11*
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
LaCie d2 Extreme LUN 0:
Manufacturer: LaCie Group SA
Model: 0x0
GUID: 0xD04B710B061FB5
Maximum Speed: Up to 800 Mb/sec
Connection Speed: Up to 400 Mb/sec
Sub-units:
LaCie d2 Extreme LUN 0 Unit:
Unit Software Version: 0x10483
Unit Spec ID: 0x609E
Firmware Revision: 0x102
Product Revision Level: P22O
Sub-units:
LaCie d2 Extreme LUN 0 SBP-LUN:
Capacity: 153.38 GB
Removable Media: Yes
BSD Name: disk2
OS9 Drivers: Yes
S.M.A.R.T. status: Not Supported
Volumes:
disk2s6:
Capacity: 153.38 GB
Available: 102.21 GB
Writable: Yes
File System: HFS+
d2 quadra (button):
Manufacturer: LaCie
Model: 0x4136
GUID: 0xD04B840A07A9A5
Maximum Speed: Up to 800 Mb/sec
Connection Speed: Up to 400 Mb/sec
Sub-units:
d2 quadra (button) Unit:
Unit Software Version: 0x484944
Unit Spec ID: 0xD04B
d2 quadra Unit:
Unit Software Version: 0x10483
Unit Spec ID: 0x609E
Firmware Revision: 0x110
Product Revision Level:
Sub-units:
d2 quadra SBP-LUN:
Capacity: 465.76 GB
Removable Media: Yes
BSD Name: disk4
OS9 Drivers: No
S.M.A.R.T. status: Not Supported
Volumes:
disk4s3:
Capacity: 465.64 GB
Available: 250.79 GB
Writable: Yes
File System: Journaled HFS+
LaCie Big Disk Extreme LUN 0:
Manufacturer: LaCie Group SA
Model: 0x0
GUID: 0xD04B741A058BFC
Maximum Speed: Up to 800 Mb/sec
*Connection Speed: Unknown --------------------------**{this is where my concern lies}*
Sub-units:
LaCie Big Disk Extreme LUN 0 Unit:
Unit Software Version: 0x10483
Unit Spec ID: 0x609E
Firmware Revision: 0x102
Product Revision Level: 912
Sub-units:
LaCie Big Disk Extreme LUN 0 SBP-LUN:
Capacity: 931.52 GB
Removable Media: Yes
BSD Name: disk3
OS9 Drivers: Yes
S.M.A.R.T. status: Not Supported
Volumes:
disk3s6:
Capacity: 931.52 GB
Available: 181.67 GB
Writable: Yes
File System: HFS+

Hi BDAqua - thanks a lot for replying - really appreciate your help. I was using Time machine to back up on the old lacie drives that I have - I just backed up on both lacies and they backed up faster for some reason but that might have been because they were very small back ups as I did full back ups on Tuesday night - this is the info under the USB section > hardware > about my mac - it didn't show the speed like the example you gave me though but it still backed none the less :
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x15
Bluetooth USB Host Controller:
Product ID: 0x8207
Vendor ID: 0x05ac (Apple Inc.)
Version: 19.65
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0x15200000
Current Available (mA): 500
Current Required (mA): 0
I also got a reply back from WD on the hard drive and they said the following - exactly the same as you about it being a problem with the power supplied hence why the disk won't mount - so you were spot on - so I'm thinking I should go ahead and get the newertech 7 USB port 4 amps as you suggested - let me know what you think and then I'll just order it - and thank you - really do appreciate your help on this - thanks Jayas
Dear Jayas
Thank you for contacting Western Digital Customer Service and Support. My name is James.
If the drive is working fine on one system but failing on another especially with the "clicking" sound this is an issue with the system not being able to supply enough power to power the device.
These devices require power from the machine to make them operate if there isn't enough power supplied the drive will fail to work. This is why you are having no issues with one system but are on another.

Hard drives not showing up in BIOS of UCS C22M3 Server

Hi there,
I am wondering if someone can help me work out why my internal hard drives aren't showing up in the BIOS. When I enable the RAID controller and set up an array they are detected and placed online, but if I remove the RAID array they do not show up in the BIOS as a device from which I can boot from. I am using the onboard SCU as the RAID controller and it makes no difference with this enabled or not, the internal hard drives do not show up in the BIOS. I have tried many different combinations but are unable to ever see the drives listed in the BIOS. Initially when I first received the server I was sure this was the case but have since formatted the drives. I have also tried resetting the BIOS settings to default.
I would be most grateful if someone could help me as I have been working on this problem for a long time with no success.
Thanks in advance.
Tim
This image shows the drives with the array active, if I remove the array the drives still show up on this screen but not in BIOS.

Hey Tim, welcome to the communy!
I don't think you are even supposed to see the individual disks as a boot option. For all I know UCS is not intendeed to use its disks as JBOD (we'll see if that changes with new technologies like Hadoop) reason why you dont see the disks; you can see the RAID controller as a boot option if you enable it to control the disks.
I made the test in a C220 with a PCIe RAID controller (I don't have a C22 but it is very similar) and when I went to BIOS I didn't see the disks listed either, then I rebooted and pressed F6 and still the disks are not showing up, only the PCIe RAID controller showed up as a boot option:
Last 2 things:
1-Why do you want to see the individual disks as a boot option?
2-Have you check another C22 or any other model to see if the behavior is different? If this does not happen on other servers (which I think it is NOT going to be the case) open a TAC case for further investigation.
Rate ALL helpful answers.
-Kenny

LAP-TOP HP PROBOOK 4330S hdd not show in the bios if I trouble shot show hdd not installed

LAP-TOP HP PROBOOK 4330S hdd not show in the bios if I trouble shot show hdd not installed

Hi ASMX,
Welcome to the HP forum!
Your HP Probook is a commercial product. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Commercial Forum/Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
In the mean time here is a link to your homepage.HP ProBook 6560b Notebook PC Support
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Bios not install error and Raid Configuration not showing physcial HDD in Lenovo

Is this a SATA hard drive by any chance? Sounds like you have an Adaptec SCSI controller, but no hard drive attached to it. Are you booting an install DVD of some sort?

Bios not install error and Raid Configuration not showing physcial HDD in Lenovo RD 120 Server (New)
updated bios still same error
and at array configuration it is not showing any hard disk
hard disk utility it is showing hard disk
we are trying to install OS with single hard disk in Lenovo RD 120 Server
This topic first appeared in the Spiceworks Community

MSI Z68A-GD80-G3 sata port 7 marvell controlled not showing in BIOS

My spec is..Antec 1200 case. MSI Z68A-GD80-G3 board . i7 -2700K @4.1 GHZ. GTX 580 OC twin FrozR II 1536 Mb Graphics.Corsair Vengeance 16 GB PC3-12800C9 1600MHz RAM. Cooler Master Hyper 212+ CPU cooler. Crucial SSD M4 128 GB SATA 6Gb/s main Hard drive.Crucial SSD M4 128GB hard drive. 500 GB HDD. Crucial SSD M4 60GB.1200W PSU.
My 3rd 60 GB SSD drive had to be plugged in sata 7..I reformatted It in windows and it is working. It does still not show up on BIOS.
I could not find my install disc. I couldnt find any marvell drivers in the download section for my board?
Has windows found them? why no show in BIOS?

I may have found correct drivers now SATA 7 drive is showing up. seems to be running . my ssds running off SATA 1 and 2 are getting a AS SSD bench mark score of 710 and 780. The SATA 7 one is scoring at 340 so it is not working like the first x2 SDD's.

Z87-G43 Bios crashing, not showing information

I just built a new system using the Z87-G43. Everything was fine, I just installed a pci-e esata card using the Silicon Image SI3132 SATALink Controller.
My computer will not boot unless I have my external bay on and a drive installed. If I don't have the bay turned on and a drive installed, I get the A2 error.
I had previous esata cards and never had this issue.
Also, now when I enter Bios setup, virtually no information is displayed. I see only Advanced and Password as options in the main screen. If I click where the other options are, Bios freezes.
I'm pretty sure this didn't happen until I put the new esata card in.
Can anybody help me figure out what is going on?
Should I be concerned my Bios is going to fail or become corrupt?
I can't be sure but I was able to read this number at the top of the Bios page, E7816IMS V1.6
I would like to make sure I have the latest Bios but am weary of using Live Update due to all the horror stories.
If anybody has any insight as to what is going on, I really would appreciate some help.
Thank you!

Update;
My BIOS update to v1.7 seemed to go ok, haven't noticed any problems. I also updated the Intel ME drivers, that went fine as well.
Weird, even when my bios (v1.6) was corrupt, my system would boot without issue (not sure if the A2 error was due to bios or a piece of my hardware).
Anyways, I had a pci-e esata card PEXESAT3221, couldn't get it to show the drives inside my 4 bay esata enclosure. It was just like they weren't attached or the enclosure was not powered on. After much frustration, I moved on to a different card.
Card two, SD-SA2PEX-2E, This card would only see one drive in my enclosure (when I had more than one installed) in My Computer. I could 'see' the drives in the bottom pane of Disk Management, then could right click on the drive and select 'change drive letter and path' and that drive would show up in My Computer and was available. I had to do this for every drive. If I moved a drive or swapped drives, I would have to go through the process again. If I rebooted, I would again have to go through the process to be able to 'see' more than one drive. I was working with the manufacturer of the card and they kept telling me to install the latest drivers, which I did but the latest drivers were only compatible with card bios v 7.7.02 (my card was 7.7.03). Their website stated that bios and driver versions needed to be matched. For some reason, I could never get them to understand that the driver for bios 7.7.02 was not working as my card had bios 7.7.03. So, out of frustration, I nixed the card and went back to the first card.
Now, same thing as before, this card just would not show any drives. I checked the installation of the driver and it showed the latest, v 1.3.8.0 Asmedia 106x. I did some research and discovered that some people were discussing drivers for this device they found on a foreign website, not affiliated with the card vendor. I took a chance and downloaded those drivers, v 2.0.8.0 and what do you know? Everything works fine now, so far (still have to do some testing before I'm absolutely convinced)...
Feels good to see my drives show up when I power on my enclosure, or swap drives etc...
Not sure why a motherboard bios update would change the behavior of a pci-e card like this but I feel fortunate to have struggled through. I appreciate all the help and advice, thanks fellas.

Ipod does not show up in I-tunes and does not allow me to Restore

My Ipod does not show up in I-tunes since I switched from my desktop to the laptop. When I connect to the laptop I-tunes freezes and stops responding. I have tried to update or restore my I-pod to start anew with my laptop but I get a message that says "Firmware update failure, disk write error"! My ipod still works but I cannot update my songs or sync it to the new laptop. Am I totally out of luck or can something be done to save this. Dont these come with a year warranty? Can Apple fix this if it is beyond my help?

well done pezdzpnzer!
Unfortunately I am not able to take advantage of the USB 2.0. Is this permanent or did I just have to turn it off originally.
hmmm. now the initial synch has gone through, we might try experimenting with re-enabling the high speed interface (mentioned at the end of the other document.
it may also be worth checking up on this document:
iPod not recognized when connected to Windows laptop over USB
if the problem comes back/persists, it might be worth heading to the Toshiba website and checking for updates for your make and model. on some Toshiba laptops there was a general issue with the USB that was fixed by a BIOS update, and that helped with the ipod connection issues ... but the reports i saw here (a few months ago) didn't mention a specific model as far as i recall.
merry christmas!
love, b

3D option not showing up for me in Photoshop!?

Hey guys, I'm using my Photoshop CS6 Extended & I'm trying to utilize the '3D' effect feature, but it's not showing up where it should be.... I been following video tutorials & such online from other users of my same photoshop version, & I'm seeing where there 3D option shows up, but it doesn't for me!
Also I have tried going to Edit>Preferences> Performance .... the Graphics Processor settings section says, " No GPU options available with Photoshop standard", the 'Use Graphics Processor" option is not checked in, nor is photoshop allowing me to select this option ... when I run my cursor over this section the description box at bottom reads, "Photoshop detected an error in your display driver. Update or reinstall the driver and check Use Graphics Processor to retry."
I'm not sure if the above mentioned information is relevant or not, but from what I've gathered through my online searches it MAYbe... figured I'd include it incase it is relevant to speed up the troubleshooting process.
Please, any help would be greatly appreciated, thanks !
Below is my system info as it shows up in Photoshop:
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x32
Operating System: Windows 7 32-bit
Version: 6.1
System architecture: Intel CPU Family:15, Model:3, Stepping:4 with MMX, SSE Integer, SSE FP, SSE2, SSE3, HyperThreading
Physical processor count: 1
Logical processor count: 2
Processor speed: 3400 MHz
Built-in memory: 2046 MB
Free memory: 539 MB
Memory available to Photoshop: 1658 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
The GPU Sniffer crashed on 11/10/2012 at 4:58:01 PM
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1024, right: 1280
No video card detected
Serial number: 92628701192123445467
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6\
Temporary file path: C:\Users\LOSOCE~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 232.9G, 122.5G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2012/06/05-15:16:32   66.507768   66.507768
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/06/26-12:17:19   4.0.95   66.510504
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   6,0,29,0
   AGM.dll   AGM 2012/06/05-15:16:32   66.507768   66.507768
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/06/05-15:16:32   66.507768   66.507768
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/06/05-15:16:32   66.507768   66.507768
   BIBUtils.dll   BIBUtils 2012/06/05-15:16:32   66.507768   66.507768
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
   CoolType.dll   CoolType 2012/06/05-15:16:32   66.507768   66.507768
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libeay32.dll   The OpenSSL Toolkit   0.9.8g
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1640
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp71.dll   Microsoft® Visual Studio .NET   7.10.3077.0
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr71.dll   Microsoft® Visual Studio .NET   7.10.3052.4
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (32 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   shfolder.dll   Microsoft(R) Windows (R) 2000 Operating System   5.50.4027.300
   ssleay32.dll   The OpenSSL Toolkit   0.9.8g
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
   wu3d.dll   U3D Writer   9.3.0.113
Required plug-ins:
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   ADM 3.11x01
   Angled Strokes 13.0
   Average 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Bas Relief 13.0
   BMP 13.0
   Camera Raw 7.0
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Clouds 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Collada 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Difference Clouds 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Embed Watermark 4.0
   Extrude 13.0
   FastCore Routines 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Measurement Core 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Mezzotint 13.0
   MMXCore Routines 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Photocopy 13.0
   Photoshop 3D Engine 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Picture Package Filter 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Pinch 13.0
   Pixar 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.0.1
   Shear 13.0
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Sumi-e 13.0
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   Underpainting 13.0
   Vanishing Point 13.0
   Variations 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   WIA Support 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Wind 13.0
   Wireless Bitmap 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
   Kuler
Installed TWAIN devices: NONE

Perhaps, you should try to reset your preference file to see if it corrects itself. I have posted the instructions at this link:
http://forums.adobe.com/thread/1097046?tstart=0
Good luck.

I have a mid-2010 iMac and just purchased a 2TB TC, can't join existing wireless network with AC standard so attached to iMac via ethernet with TC wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. working fine with TM

I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM. My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore. Connected those drives to TM via firewire and could see the drives and access them.
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc. I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads. Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system. I really didn't want to monkey around too much with my system. But are there other options to connect the new TC. Can't find info anywhere for this and called apple who gave me the info above. after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light or repair it in disk utility if it should become corrupted.
For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working. Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
Now a rant. I can't believe in this wireless age that Apple would make a product that cant join a wireless net work. The apple rep said i could return it and look for the previous TC that would join an existing wireless network. Are we going backwards?
Thanks!
lennydas

Ok... it is getting a bit clearer but there are still some questions.
I connect to the internet via airport only and it is pretty fast.
I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc.
I think this is mistaken.
Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
If the computer is close it will be faster than the FIOS.
You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC. the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
Thanks again!
You cannot extend to a non-apple wireless router.
You cannot use join a wireless network because when you do the ethernet ports will be cut off.
But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
Join in the express is the only apple router that still allows an ethernet connection.
For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options.

My ext HD Icon from a portioned drive does not show up on Desktop

I have an external hard drive with two partitions that both showed up on the the desktop. For some reason, one of the partitions stopped showing up on the desktop but does show up when viewed from finder, disk utility, etc.
I ran permissions, relaunched, etc. One of the partitions still does not show up- very frustrating. I looked at info, preferences, etc. and can't figure it out.
I plugged the hard drive into another computer and both show up there...
So any help will be greatly appreciated.
Skip

Hello markshepherd1,
Thanks for using Apple Support Communities.
According to the following article, when you're going through the process of burning a playlist to a disc, you have the option to select "Include CD Text".
If you’re creating an audio CD, choose your options:
Change the recording speed:
Choose an option from the Preferred Speed pop-up menu.
When you burn an audio CD, iTunes automatically uses the best recording speed for the CD. However, if your blank CD is rated for a slower speed than the maximum speed of your drive, or if you experience problems creating CDs, you may want to change the recording speed to match the CD’s rating.
Change the amount of silence between songs:
Choose an option from the Gap Between Songs pop-up menu.
Have all the songs on the disc play at the same volume:
Select Use Sound Check.
Include information that disc players in some vehicles can display:
Select Include CD Text.
iTunes 11 for Mac: Create your own CDs and DVDs
http://support.apple.com/kb/PH12148
Take care,
Alex H.

I have installed Adobe Premiere Pro cc on my laptop, but I cant find a way to start the program. No Icon, and it is not showing up in the start meny. It is showing up in add/remove programs, but nt anywhere else.

I have installed Adobe Premiere Pro cc on my laptop, but I cant find a way to start the program. No Icon, and it is not showing up in the start meny. It is showing up in add/remove programs, but nt anywhere else.

If you are using a Mac, simply hit Command-Spacebar to bring up Spotlight Search. Begin typing the name of the application and when you see what you are looking for, press enter. You should get a hit by the second or third letter you type. Great way to launch apps on computers that you are not familiar with.
Windows 7 and 8 should have something similar. I think you simply press the Windows key and begin typing. Press enter when you see a match.
Both Mac and Windows search tools can be customized to search for applications, files, emails and so forth. For Windows, look for Taskbar and Start Menu Properties. For Mac, go to Preferences Spotlight. Turn off items you know you won't need to speed up searches.
Make Windows 7 Start Menu Search Find Your Applications Faster

Bios not showing speed

Similar Messages

Maybe you are looking for