BIOS PANIC---Please Help!!! (Amd athlon Xp2100+)

Hi ya'll!
2nite I got an idea to upgrade my motherboard using MSI Live update. Everything worked out fine. BUT, later on I noticed that after flashing my Cpu was set to XP1500+. Thing is I got XP2100+!!! I made a resquedisk before flashing, but it doesn't seam 2 work!
Any1 got any ideas how I could get my ordinary Cpu speed back???(1300---->1733) 
System:
Amd athlon Xp 2100+
Mb MSI MS - 6712 KT3V
Ram 1024 DDR

...OK...you're in the wrong forum but here's what happened...your FSB was set to 100 after you flashed...correct setting for 2100+ XP is 133 (2 X 133 = 266MHz)...

Similar Messages

  • MOVED: BIOS PANIC---Please Help!!! (Amd athlon Xp2100+)

    This topic has been moved to  AMD Socket A Forum
    BIOS PANIC---Please Help!!! (Amd athlon Xp2100+)

    ...OK...you're in the wrong forum but here's what happened...your FSB was set to 100 after you flashed...correct setting for 2100+ XP is 133 (2 X 133 = 266MHz)...

  • Please help AMD ATHLON XP W/ KT4 MS6590 CANNOT INSTALL WINDOWS 98/ME/X

    Hello all
    I just built my system 2 days ago and I still cannot install any version of windows. everytime I try to install windows 98/ME or Xp I get errors. The computer boots fine and doesnt freeze up or anything like that and i changed the FSb to 133mhz so it registers as AMD ATHLON XP 2000.
    my system is as follows
    KT4 MS6590 (the version that comes w/ the 5.1 dolby digital bracket.
    AMD ATHLON XP 2000
    256 MB DDR pc 2700 ram
    48x CD rom
    ATI RAdeon 9000 128 MB Oem video card
    Enermax CS3051L alum/acrylic 350watt neon case
    15 gb maxtor HDD
    I am using an old hard drive but it works fine in the other p3 system.
    My case is one of those designer enermax ones that have the blue neon installed inside
    Includeing the cpu fan I have got 4 installed all together.
    I am useing the optimal settings
    I have no clue what to do next.
    any help or suggestions would be greatly appreciated

    Thanks for replying.
    I tried for 2 days with default settings and all the different types of settings i can think of in the bios.
    Finally i disabled all the caching options , disabled apic and windows xp was able to install but took me almost 4 hours to install :( .
    the problem is i think i have bad RAMS I also changed the ram which is pc 2700 ddr from 333 mhz to 266 mhz. Before i was getting some module erros as well as some setup errors. I read that bad rams can cause these erros.
    I would like to know my 256 MB pc 2700 DDR running at 266 mhz . how much percentage of system speed am I loseing?
    Also is flashing the bios from diskette a bad thing and can ruin the board and also regarding the beta bios . has there been any mishaps from anyone using it.
    I like this motherboard but i got to admit its a pain in the ass. esp with all the configurations there is to do. some of them i am not even too sure if i should be using them or not. I am also afraid to touch them bc my system might become unstable and unreliable.
    also is there an led on the motherboard for the kt4 ms 6590 I dont see any. This is my first time building a system and setting it up myself.  so any help is appreciated

  • HP Pavilion dv6-7023tx Entertainment Notebook PC bios failure please help

    I have hp pavilion dv6 7023tx notebook pc, I installed a bios update from hp.  After rebooting it wont start. only balck screen showing, no beep sounds no blinking lights (caps lock)  ,  i tried everthing using usb key pressing windows + b key and nothing worked.. please help. thank you.  

    @prabu93 
    Thank you for using HP support forum. I have sent you a private message. If you’re unsure how to check your private messages please click here.
    Thank you,
    Omar
    I Work for HP

  • Bad BIOS Flashing - Please Help !

    Hello,
    I'm having a serious trouble because the BIOS UPDATE failed since I had a power outage while I was updating the BIOS.
    Since that, I couldn't get any video output, it's only 8 beeps with the orange light, and then the blue light and nothing happens. Is there a way to prepare an USB KEY with the BIOS updates, initiating the CPU with the Windows+B keys pressed on?
    I've tried to apply the BIOS UPDATE SP63535 who had the BIOS version ANP_704.bin
    Please HELP ME, thanks a LOT !!!
    Klaus

    Hello @klausbert,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your desktop computer is not able to get any video output, and I would be happy to assist you in this matter!
    To further diagnose this issue, I recommend following the steps in this document on Recovering the BIOS. This should help restore the BIOS back to factory defaults.
    If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Bios Downgrade please help

    Hi
    First of all sorry for my english...ok...I have a problem on my probook 6550b with which I have been dealing for two days now...i format my disk install a fresh copy of Win 7 ultimate 64 bit...I download al the drivers and update my bios...comp starts to working slowly,like laggy...i updated win with all the updates, use nod 32, scan everything, use speedupmypc etc...everything loks ok, but computer is still very slow...so i format again...do the same thing again...no results...So I assume that the problem is in the new version of BIOS...and here are my problems start...i tried do flash with older version but it wound let me(failure) I tried with windows key + b + power button holding 3 sec...i get black screen, fan starts to spining at ful, but nothing happend(i wait for 3min,3 times), and then i cannot power down comp unless i take my battery out..so my question is, is it posible to flash backwards on my laptop, or am i risking to brick my comp?????
    PLEASE HELP!!!

    Hm, @Manjunath, does what you suggest actually downgrade the BIOS or simply reset bios settings to the factory default settings? I understood that a BIOS downgrade is not possible in all instances, though this would be clearly stated in the BIOS release notes if a downgrade is not possible after the update.... So if there is no such downgrade warning/statement in any BIOS release notes between the current BIOS and the desired older BIOS, it should be possibly by simply running the HPQFlash.exe with the older BIOS and accepting the prompts/warning that the new BIOS is older than the current BIOS (i.e. a downgrade). If there was a warning/statement in the release notes of a any BIOS between the current BIOS and desired older BIOS, then it wont be possible without specialist tools, software and/or effort (if at all)!

  • Bios locked, please help

    bios is locked on hp 14-b017cl,  the code its showing is  [ 51389507 ]. please help  
    This question was solved.
    View Solution.

    Hi,
    Enter:      44081529
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • GT60 0NC: Find a unlocked BIOS! Please help me!

    Hello Svet,
    BIOS: E16F3IMS.30M
    Firmware: 16F3EMS1.412
    Just googling <- I can't get it. 
    Find the BIOS for memory upgrade and overclocking(also using EFI Function) <- yes... I need fully functional BIOS.
    Please... Can you help me? 
    (Sorry, I can't english very well... I'm writing by translator... )

    Quote from: engineeredgear on 18-November-12, 00:42:34
    ok. I'll be waiting.
    fn key? no. thanx. 
    ('cause... my keyboard has east-asian functional... that's ok~ )
    oks, check PM

  • KERNEL PANIC PLEASE HELP ME

    I'VE GOT THIS KERNEL PANIC FOR 5 TIMES PLEASE HELP ME
    THESE ARE THE panic.log
    Tue Jan 2 22:42:16 2007
    panic(cpu 0 caller 0x001A31CE): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
    CR0: 0x8001003b, CR2: 0xc4e74e65, CR3: 0x00d78000, CR4: 0x000006e0
    EAX: 0x00000006, EBX: 0x128ef107, ECX: 0xc4e74e65, EDX: 0x12533b88
    CR2: 0xc4e74e65, EBP: 0x1409bd28, ESI: 0xc4e74e6b, EDI: 0x12533308
    EFL: 0x00010206, EIP: 0x00198724, CS: 0x00000008, DS: 0x02720010
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x1409bb28 : 0x128d08 (0x3c9a14 0x1409bb4c 0x131de5 0x0)
    0x1409bb68 : 0x1a31ce (0x3cf6c8 0x0 0xe 0x3ceef8)
    0x1409bc78 : 0x19a874 (0x1409bc90 0x272c0d8 0x1409bcd8 0x1976fc)
    0x1409bd28 : 0x98b950 (0xc4e74e65 0x128ef107 0x6 0x3ef78180)
    0x1409bf08 : 0x398e91 (0x12533308 0x2a51480 0x1 0x25e43b4)
    0x1409bf58 : 0x398063 (0x2a51480 0x135eb4 0x0 0x25e43b4)
    0x1409bf88 : 0x397d99 (0x2b7b740 0x2f09b04 0x452084 0x4b8000)
    0x1409bfc8 : 0x19a6ec (0x2b7b740 0x0 0x10 0x30d13e0) Backtrace terminated-invalid frame pointer 0x0
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AirPortAtheros(211.2)@0x95d000
    dependency: com.apple.iokit.IONetworkingFamily(1.5.1)@0x69d000
    dependency: com.apple.iokit.IOPCIFamily(2.2)@0x580000
    dependency: com.apple.iokit.IO80211Family(140.4)@0x941000
    Kernel version:
    Darwin Kernel Version 8.8.3: Wed Oct 18 21:57:10 PDT 2006; root:xnu-792.15.4.obj~4/RELEASE_I386
    Sun Jan 7 12:51:54 2007
    panic(cpu 0 caller 0x001A31CE): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
    CR0: 0x8001003b, CR2: 0x4da6e437, CR3: 0x00d78000, CR4: 0x000006e0
    EAX: 0x4da6e407, EBX: 0x1b050407, ECX: 0x3f060e90, EDX: 0x0c638b20
    CR2: 0x4da6e437, EBP: 0x13ef3d28, ESI: 0x3f056b20, EDI: 0x12533308
    EFL: 0x00010202, EIP: 0x009b1c84, CS: 0x00000008, DS: 0x004b0010
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x13ef3ae8 : 0x128d08 (0x3c9a14 0x13ef3b0c 0x131de5 0x0)
    0x13ef3b28 : 0x1a31ce (0x3cf6c8 0x0 0xe 0x3ceef8)
    0x13ef3c38 : 0x19a874 (0x13ef3c50 0x25bb6800 0x1 0x1)
    0x13ef3d28 : 0x98b7f4 (0x12665004 0x3f056b20 0xc638b20 0x4da6e407)
    0x13ef3f08 : 0x398e91 (0x12533308 0x2a4ad00 0x1 0x2736de0)
    0x13ef3f58 : 0x398063 (0x2a4ad00 0x0 0x13ef3f78 0x4af038)
    0x13ef3f88 : 0x397d99 (0x2a59bc0 0x2ec091c 0x13ef3fa8 0xffffffff)
    0x13ef3fc8 : 0x19a6ec (0x2a59bc0 0x0 0x10 0x301ace0) Backtrace terminated-invalid frame pointer 0x0
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AirPortAtheros(211.2)@0x95d000
    dependency: com.apple.iokit.IONetworkingFamily(1.5.1)@0x69d000
    dependency: com.apple.iokit.IOPCIFamily(2.2)@0x580000
    dependency: com.apple.iokit.IO80211Family(140.4)@0x941000
    Kernel version:
    Darwin Kernel Version 8.8.3: Wed Oct 18 21:57:10 PDT 2006; root:xnu-792.15.4.obj~4/RELEASE_I386
    Fri Jan 12 19:29:08 2007
    panic(cpu 0 caller 0x0035AD9B): mbuf address out of range 0x32343238
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x14053ab8 : 0x128d08 (0x3c9a14 0x14053adc 0x131de5 0x0)
    0x14053af8 : 0x35ad9b (0x3ea14c 0x32343238 0x2e4706c 0x13fe35)
    0x14053b18 : 0x239999 (0x1 0x2 0x14053b28 0x14053b28)
    0x14053c28 : 0x238541 (0x35d3c9c 0x30d355f3 0x30d35b8b 0xd00a8c0)
    0x14053e08 : 0x22d264 (0x25bc8e00 0x14 0x14053e58 0x1a06d8)
    0x14053e48 : 0x22ecc5 (0x25bc8e00 0x14 0x6 0x0)
    0x14053f58 : 0x21c441 (0x25bc8e00 0x25bc8e00 0x44407c 0x1a1f6f)
    0x14053f98 : 0x202cfe (0x2c8ec04 0x25bc8e00 0x25bde812 0x1)
    0x14053fc8 : 0x19a6ec (0x0 0x0 0x19d0b5 0x2f7e9a0) Backtrace terminated-invalid frame pointer 0x0
    Kernel version:
    Darwin Kernel Version 8.8.3: Wed Oct 18 21:57:10 PDT 2006; root:xnu-792.15.4.obj~4/RELEASE_I386
    Sat Jan 27 16:47:34 2007
    panic(cpu 0 caller 0x0035AD9B): mbuf address out of range 0xf7bf1400
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x1405bab8 : 0x128d08 (0x3c9a14 0x1405badc 0x131de5 0x0)
    0x1405baf8 : 0x35ad9b (0x3ea14c 0xf7bf1400 0x1405bb68 0x1416ad)
    0x1405bb18 : 0x239999 (0x1 0x2 0x0 0x25bf5800)
    0x1405bc28 : 0x238541 (0x3008e08 0x225db696 0x225db76c 0xe00a8c0)
    0x1405be08 : 0x22d264 (0x25bf5800 0x14 0x1405be58 0x1a06d8)
    0x1405be48 : 0x22ecc5 (0x25bf5800 0x14 0x6 0x0)
    0x1405bf58 : 0x21c441 (0x25bf5800 0x25bf5800 0x44407c 0x1a1f6f)
    0x1405bf98 : 0x202cfe (0x2c47a04 0x25bf5800 0x25c58812 0x1)
    0x1405bfc8 : 0x19a6ec (0x0 0x0 0x10 0x0) Backtrace terminated-invalid frame pointer 0x0
    Kernel version:
    Darwin Kernel Version 8.8.3: Wed Oct 18 21:57:10 PDT 2006; root:xnu-792.15.4.obj~4/RELEASE_I386
    Sun Jan 28 20:23:11 2007
    panic(cpu 0 caller 0x001A31CE): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
    CR0: 0x8001003b, CR2: 0xb13d1295, CR3: 0x00d7d000, CR4: 0x000006e0
    EAX: 0x00000006, EBX: 0x12838107, ECX: 0xb13d1295, EDX: 0x1253cad0
    CR2: 0xb13d1295, EBP: 0x1406bd28, ESI: 0xb13d129b, EDI: 0x1253c2c8
    EFL: 0x00010206, EIP: 0x00198724, CS: 0x00000008, DS: 0x00000010
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x1406bb28 : 0x128d08 (0x3c9a14 0x1406bb4c 0x131de5 0x0)
    0x1406bb68 : 0x1a31ce (0x3cf6c8 0x0 0xe 0x3ceef8)
    0x1406bc78 : 0x19a874 (0x1406bc90 0x2f00988 0x1406bcd8 0x6)
    0x1406bd28 : 0x98efb3 (0xb13d1295 0x12838107 0x6 0x40224e10)
    0x1406bf08 : 0x398e91 (0x1253c2c8 0x2a64f80 0x1 0x0)
    0x1406bf58 : 0x398063 (0x2a64f80 0x0 0x0 0x0)
    0x1406bf88 : 0x397d99 (0x2b8a7c0 0x0 0xa934e4 0x0)
    0x1406bfc8 : 0x19a6ec (0x2b8a7c0 0x0 0x10 0x30433e0) Backtrace terminated-invalid frame pointer 0x0
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AirPortAtheros(221.46)@0x95e000
    dependency: com.apple.iokit.IONetworkingFamily(1.5.1)@0x89c000
    dependency: com.apple.iokit.IOPCIFamily(2.2)@0x580000
    dependency: com.apple.iokit.IO80211Family(151.1)@0x941000
    Kernel version:
    Darwin Kernel Version 8.8.3: Wed Oct 18 21:57:10 PDT 2006; root:xnu-792.15.4.obj~4/RELEASE_I386
    anyone knows what's wrong with this?? thanks

    Hello there. I have done a little research and everything I have found points to a bad memory module. I would try booting from the install CD and running a complete hardware test and checking those results. If everything passes, and you feel comfortable, remove one of your RAM sticks and reboot the computer. See if you get a panic then. If so, swap the sticks and reboot with the other. If you don't get a panic, then you most definitely have a bad piece of memory. In that case, call AppleCare and they'll send you another. But if all this seems too much trouble, you could always take your computer to an Apple Store and let them do it for you, or call Apple Care and have a chat with them.
    Hope you get the problem figured out. I know it stinks!

  • LR 2.6 panic, please help

    Hello
    I have just updated to version 2.6
    Now lightroom does not show pictures any more.
    All the collections are there, picture count is ok, the thumbnails are there but blank, with the ratings ok.
    If I select a thumbnail, the information on the right is ok, metadata is ok, edited info is ok...
    in other words, everything is ok, except I can't see any image!
    Not in the thumbnails, and neither in the single image window for editing.
    I tried reload catalog, restart program, nothing.
    I don't know what to try.
    Please help.
    Orio

    I solved my own problem. I changed the monitor's colour profile and the images went back. Strange.

  • Bios corruption please help me!!! Screenblack and failed upgrade

    I was upgrading my BIOS in my notebook, an envy 17, unfortunatedly the battery died in the process. My notebook cant restart again, it only has a beep with the blockmayus, and its all. Im sure that is a Bios corruption, i need help with the pendrive, i hope that the recovery USB can resolve this problem

    Ayrton wrote:
    I was upgrading my BIOS in my notebook, an envy 17, unfortunatedly the battery died in the process. My notebook cant restart again, it only has a beep with the blockmayus, and its all. Im sure that is a Bios corruption, i need help with the pendrive, i hope that the recovery USB can resolve this problem
    Hi,
    HP notebook computers have an emergency BIOS recovery feature that allows you to recover and install the last known good version of the BIOS from the hard drive, as long as the hard drive remains functional.
    Try restoring BIOS using instructons in this HP web document. You have to strictly follow it to elicit a positive response. The timings are of utmost importance and you've keep on trying many times.
    If that didn't work, try recovering the notebook BIOS using an external storage device (USB key) as mentioned in the doucment ...
    The latest HP UEFI BIOS Update SoftPAQ is sp69886.exe .  Run the installer and create a USB key as per instructions from another PC.
    (This package contains the WinFlash utility and a system BIOS image for the supported notebook model running a supported operating system. The WinFlash utility is used to locally flash the system BIOS (ROM) on notebooks operating in a Microsoft Windows environment.)
    Previous version of HP UEFI BIOS Update SoftPAQ sp66941.exe ,  is also available. You can try with this if latest one don't work out.
    Note: Keep the laptop plugged in with AC adapter to Power supply during the whole process.
    If the above methos doesn't work, please Contact HP in your region or local computer service center for further help in this regard.
    Regards
    Visruth
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • Constant Kernel Panics- Please help!

    Hi,
    I am currently running Mountaint Lion 10.8.5 (haven't updated to mavericks quite yet) on a 2.53 GHz Intel core 2 duo Macbook Pro.  I'm not sure of the year it was made but if that's really important I can look up the serial.  Anyways, this thing is making me crazy.  Kernel Panics ("your computer shut down because of a problem") have become an extraordinarily common part of my life.  The more demanding the task (LOW resolution games would be the most demanding), the more frequent the Panics. Sometimes it even happens when I'm just browsing or watching netflix.  Usually before the kernel panic occurs the computer has heated up quite a bit and the fan starts wurring like an engine.  I do consistently use my laptop on my bed; I heard that may be affecting the airflow to the vents.  But I assure you the Panics occur on flat surfaces as well.  I bought this machine used so I don't know it's full history, but under my care, it has taken no spills, drops, or damages otherwise.  I have tried many things to help: Repairing my hard drive with Disk Utility, resetting my PRAM, cleaning things up with MacKeeper, even global virus scans that come up clean.  I don't claim to be any kind of expert, but I have tried all the tools at the disposal of my knowledge and I am really starting to get frustrated.
    My last OS update was recent; far after panics started to be a problem.
    I pray to god this is not a hardware issue.
    Any help would be of the highest appreciation
    Panic Report:
    Interval Since Last Panic Report:  36672 sec
    Panics Since Last Report:          5
    Anonymous UUID:                    D82B1BA8-41D2-6A07-C995-9051B8D481BD
    Tue Feb 11 22:43:03 2014
    panic(cpu 1 caller 0xffffff801feb8945): Kernel trap at 0xffffff801fe31c1d, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0xffffef8107da3ff8, CR3: 0x0000000022b96000, CR4: 0x0000000000000660
    RAX: 0x0000000000004000, RBX: 0x0000000000000000, RCX: 0xffffff811c6a8000, RDX: 0xffffff80323116c0
    RSP: 0xffffff8107ddbe90, RBP: 0xffffff8107ddbea0, RSI: 0x00000000258f96a0, RDI: 0xffffff8020485320
    R8:  0x0000000000000000, R9:  0x0000000000000000, R10: 0xffffff8032512400, R11: 0x00000000ffffffff
    R12: 0xffffff80351f5d28, R13: 0xffffff81018fd050, R14: 0xffffef8107da0000, R15: 0xffffff80351f5d28
    RFL: 0x0000000000010082, RIP: 0xffffff801fe31c1d, CS:  0x0000000000000008, SS:  0x0000000000000000
    Fault CR2: 0xffffef8107da3ff8, Error code: 0x0000000000000002, Fault CPU: 0x1
    Backtrace (CPU 1), Frame : Return Address
    0xffffff8107ddbb30 : 0xffffff801fe1d636
    0xffffff8107ddbba0 : 0xffffff801feb8945
    0xffffff8107ddbd70 : 0xffffff801fecebfd
    0xffffff8107ddbd90 : 0xffffff801fe31c1d
    0xffffff8107ddbea0 : 0xffffff801fe31c88
    0xffffff8107ddbec0 : 0xffffff801fe3a183
    0xffffff8107ddbef0 : 0xffffff801fe3cc48
    0xffffff8107ddbf20 : 0xffffff801fe3cabe
    0xffffff8107ddbf50 : 0xffffff801fe1b70d
    0xffffff8107ddbf90 : 0xffffff801fe3bf9d
    0xffffff8107ddbfb0 : 0xffffff801feb3257
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    12F45
    Kernel version:
    Darwin Kernel Version 12.5.0: Sun Sep 29 13:33:47 PDT 2013; root:xnu-2050.48.12~1/RELEASE_X86_64
    Kernel UUID: EA38B02E-2B88-309F-BA68-1DE29F605DD8
    Kernel slide:     0x000000001fc00000
    Kernel text base: 0xffffff801fe00000
    System model name: MacBookPro5,5 (Mac-F2268AC8)
    System uptime in nanoseconds: 21206263049287
    last loaded kext at 262417438484: com.apple.filesystems.msdosfs          1.8.1 (addr 0xffffff7fa20fc000, size 65536)
    last unloaded kext at 323689935780: com.apple.filesystems.msdosfs          1.8.1 (addr 0xffffff7fa20fc000, size 57344)
    loaded kexts:
    at.obdev.nke.LittleSnitch          3932
    com.apple.filesystems.smbfs          1.8.4
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.driver.AGPM          100.13.12
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.IOBluetoothA2DPAudioDriver          4.1.7f4
    com.apple.iokit.IOBluetoothSerialManager          4.1.7f4
    com.apple.GeForce          8.1.6
    com.apple.driver.AppleUpstreamUserClient          3.5.12
    com.apple.driver.AppleBacklight          170.3.5
    com.apple.driver.AppleMCCSControl          1.1.11
    com.apple.driver.AppleMikeyHIDDriver          124
    com.apple.driver.AppleHDA          2.4.7fc4
    com.apple.driver.AppleMikeyDriver          2.4.7fc4
    com.apple.driver.AppleSMBusPCI          1.0.11d1
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.ApplePolicyControl          3.4.5
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.1.7f4
    com.apple.driver.AppleSMCLMU          2.0.3d0
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleLPC          1.6.3
    com.apple.driver.SMCMotionSensor          3.0.3d1
    com.apple.driver.AppleUSBTCButtons          237.1
    com.apple.driver.AppleUSBTCKeyboard          237.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          34
    com.apple.driver.AppleIRController          320.15
    com.apple.driver.AppleUSBCardReader          3.3.1
    com.apple.iokit.SCSITaskUserClient          3.5.6
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.3.5
    com.apple.driver.AirPort.Brcm4331          615.20.17
    com.apple.driver.AppleFWOHCI          4.9.9
    com.apple.driver.AppleUSBOHCI          621.4.0
    com.apple.driver.AppleUSBHub          635.4.0
    com.apple.driver.AppleAHCIPort          2.6.6
    com.apple.nvenet          2.0.19
    com.apple.driver.AppleUSBEHCI          621.4.6
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleACPIButtons          1.8
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.8
    com.apple.driver.AppleAPIC          1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          214.0.0
    com.apple.nke.applicationfirewall          4.0.39
    com.apple.security.quarantine          2.1
    com.apple.driver.AppleIntelCPUPowerManagement          214.0.0
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSerialFamily          10.0.6
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.nvidia.nv50hal          8.1.6
    com.apple.NVDAResman          8.1.6
    com.apple.driver.DspFuncLib          2.4.7fc4
    com.apple.iokit.IOAudioFamily          1.9.2fc7
    com.apple.kext.OSvKernDSPLib          1.12
    com.apple.driver.AppleSMBusController          1.0.11d1
    com.apple.driver.AppleHDAController          2.4.7fc4
    com.apple.iokit.IOHDAFamily          2.4.7fc4
    com.apple.iokit.IOSurface          86.0.4
    com.apple.iokit.IOBluetoothFamily          4.1.7f4
    com.apple.driver.AppleGraphicsControl          3.4.5
    com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.1.7f4
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.IOPlatformPluginFamily          5.4.1d13
    com.apple.iokit.IONDRVSupport          2.3.7
    com.apple.iokit.IOGraphicsFamily          2.3.7
    com.apple.driver.AppleSMC          3.1.5d4
    com.apple.driver.AppleUSBMultitouch          237.3
    com.apple.iokit.IOUSBHIDDriver          623.4.0
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.6
    com.apple.iokit.IOUSBMassStorageClass          3.5.2
    com.apple.driver.AppleUSBMergeNub          621.4.6
    com.apple.driver.AppleUSBComposite          621.4.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.6
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.5.5
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.6
    com.apple.iokit.IO80211Family          530.5
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOUSBUserClient          630.4.4
    com.apple.iokit.IOAHCIFamily          2.5.1
    com.apple.iokit.IONetworkingFamily          3.0
    com.apple.driver.NVSMU          2.2.9
    com.apple.iokit.IOUSBFamily          635.4.0
    com.apple.driver.AppleEFINVRAM          2.0
    com.apple.driver.AppleEFIRuntime          2.0
    com.apple.iokit.IOHIDFamily          1.8.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          220.3
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          345
    com.apple.iokit.IOStorageFamily          1.8
    com.apple.driver.AppleKeyStore          28.21
    com.apple.driver.AppleACPIPlatform          1.8
    com.apple.iokit.IOPCIFamily          2.8
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    System Profile:
    Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.53 GHz, 8 GB, SMC 1.47f2
    Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0000, 0x344742444E41554344424120202020202020
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0000, 0x344742444E41554344424120202020202020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.17)
    Bluetooth: Version 4.1.7f4 12974, 3 service, 21 devices, 3 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: WDC WD3200BPVT-24JJ5T0, 320.07 GB
    Serial ATA Device: MATSHITADVD-R   UJ-868
    USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24400000 / 2
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 2
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x04600000 / 3
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06110000 / 3
    PS I don't know if anyone could help with this, but my machine also runs unbelievably slow considering it has 8 whopping Gigabytes of RAM.

    Aaron is a boy,
    you can replace your two 4 GB 1333 MHz memory modules with two 4 GB 1066 MHz memory modules, so that you can continue to have a total of 8 GB of RAM installed. Having the proper speed RAM installed in your MacBook Pro will make a world of difference compared to its current performance. The little white booklet that originally came in the box with your MacBook Pro shows how to replace the memory modules, if you’re comfortable with performing minor upgrades; the important thing is to discharge any static electricity on you by touching something metallic before handling the memory modules or touching anything inside of your MacBook Pro. If you’d be more comfortable with someone else doing the memory module installation, then any competent computer shop would be able to do it.

  • 790FX-GD70 winki Bad bios checksum (please help!!) unresolved

    I have the 790FX-GD70 winki edition motherboard only for a few weeks, then i went on holiday for a week and when i came back and started up the computer it came up with the error:
    Bad BIOS checksum. Startin BIOS Recovery ...
    Checking for USB Devise ...
    Reading file "A7577AMS.2xx"
    but then it does nothing, iv tried puting the bios files for the winki edition and the normal edition onto a USB pen but it just comes up with that error and doesnt get past it.
    My Specs Are
    AMD Phenom II X4 955 Black Edition
    790FX-GD70 Winki Edition
    Sapphire Radeon HD 4890 2GB Vapor-X
    Kingston HyperX Triple Channel Kit - memory - 6 GB ( 3 x 2 GB ) - DIMM 240-pin - DDR3
    Western Digital WD10EADS Caviar Green 1tb SATAII 32Mb Cache
    1TB Wester Digital
    Ezcool 700W PSU
    Iv been trying to fix this for a week and nothing will work.
    cheers

    Quote from: eminem2o4 on 07-October-09, 05:13:05
    i just tired clearing it with the jumper(you dont have to press the button when you swich the jumper do you?) and it is  still coming up with the same error
    Bad BIOS checksum, Starting BIOS Recovery
    I really dont know what to do?
    and could any1 give advise on good 6gb AMD RAM?
    cheers
    Quote
    and could any1 give advise on good 6gb AMD RAM?
    Such combination is not recommended in AMD systems as you must use 2x2GB and 2x1GB memory stick to obtain it.
    Which is not good idea[mixing memory sticks]
    For best results and optimal performance, use 2x matched memory sticks only.
    Quote
    I really dont know what to do?
    Go to reseller to sort for you.
    Let him try with different memory sticks{AMD Tested}.
    The message may gone by itself, often such fake message can come from bad or not compatible memory stick.
    Quote from: Hans on 08-October-09, 01:14:27
    Make sure to change the extension to .ROM.
    Nope, system is expecting original file name A7577AMS.200 as Bas mention as well.
    Quote from: Hans on 08-October-09, 01:26:19
    Ah, I see. Thought it needed a .ROM, but I'm obviously wrong.
    But if we already knew this, what's this whole topic about then?
    Get the file on a stick and make it recover. Can't be that hard... ???
    Quote
    Get the file on a stick and make it recover. Can't be that hard... ???
    I would suggest to try with AMD regular memory stick 1st before attempt any BIOS recovery.
    Else he really can kill his board, while attempt to recover healthy BIOS{Too possible to be memory error and not BIOS failure
    [bad|not compatible memory stick can produce the same fake message.]
    Also BIOS hardly can corrupt to this stage by itself, he tell never touched the BIOS:
    Quote from: eminem2o4
    and no iv never tried to flash the bios before, and no1 was near my comp when i was away

  • Regular Kernal Panics - please help.

    Hey,
    No issues running Leopard so far, it's failed to wake a few times but otherwise a good experience. That was until yesterday when my MacBook decided to repeatedly panic causing a transparent black box to appear with a power logo telling me to restart the computer .
    When it restarts this is the report it chucks out. This has now happened more than 10 times in as many hours. Always the same info in the report. Any ideas - suggestions - ANYTHING!?!
    Sat Dec 1 08:58:47 2007
    panic(cpu 0 caller 0x0039CD77): "m_free: freeing an already freed mbuf"@/SourceCache/xnu/xnu-1228.0.2/bsd/kern/uipc_mbuf.c:2742
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x4ed8b708 : 0x12b0e1 (0x455670 0x4ed8b73c 0x133238 0x0)
    0x4ed8b758 : 0x39cd77 (0x48e03c 0x1 0x4eae701c 0x23b1d2c8)
    0x4ed8b798 : 0x39d073 (0x3019f200 0x0 0xa6 0x4eae01d0)
    0x4ed8b7b8 : 0x9f1821 (0x3019f200 0x0 0x0 0x0)
    0x4ed8b8e8 : 0x9fa9e5 (0x1 0x0 0x4eab0630 0x4eae024c)
    0x4ed8bc08 : 0x9ff93a (0x23b1d2c8 0x0 0x3626003 0x7c2c46f8)
    0x4ed8bde8 : 0xa00fb1 (0x23b1d2c8 0x0 0x4ed8bf08 0x127206)
    0x4ed8bf18 : 0x41d149 (0x23b1d000 0x427cd00 0x1 0x19ccc1)
    0x4ed8bf68 : 0x41c2a6 (0x427cd00 0x0 0x0 0x0)
    0x4ed8bf98 : 0x41bf88 (0x4327280 0x0 0x4ed8bfc8 0x125f51)
    0x4ed8bfc8 : 0x19e2ec (0x4327280 0x0 0x1a10b5 0x41aec80)
    Backtrace terminated-invalid frame pointer 0
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AirPort.Atheros(300.22)@0x9cc000->0xa56fff
    dependency: com.apple.iokit.IO80211Family(200.7)@0x9ae000
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x648000
    dependency: com.apple.iokit.IONetworkingFamily(1.6.0)@0x658000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    9B18
    Kernel version:
    Darwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 2007; root:xnu-1228.0.2~1/RELEASE_I386
    System model name: MacBook1,1 (Mac-F4208CC8)
    Here is my current config.
    Model: MacBook1,1, BootROM MB11.0061.B03, 2 processors, Intel Core Duo, 2 GHz, 2 GB
    Graphics: kHW_IntelGMA950Item, GMA 950, spdisplays_builtin, spdisplaysintegratedvram
    Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
    Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
    AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x86), 1.2.2
    Bluetooth: Version 2.0.0f20, 2 service, 0 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: TOSHIBA MK1234GSX, 111.79 GB
    Parallel ATA Device: MATSHITADVD-R UJ-857
    USB Device: Built-in iSight, Micron, high_speed, 500 mA
    USB Device: External HDD, Western Digital, high_speed, 500 mA
    USB Device: Bluetooth USB Host Controller, Apple, Inc., full_speed, 500 mA
    USB Device: IR Receiver, Apple Computer, Inc., full_speed, 500 mA
    USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, full_speed, 500 mA
    Thanks in advance,
    Eric.

    I think that you got the same Panic as I have on my brand new MacBookPro. I have no usb devices attached, so I think you can safely rule that one out. Zapping the PRAM will not help. My machine crashes frequently as well. (My machine also failed to wake up once, and then I got this same crash message, so that might be this very same problem again.)
    Mon Dec 3 09:11:38 2007
    panic(cpu 1 caller 0x0039CD77): "m_free: freeing an already freed mbuf"@/SourceCache/xnu/xnu-1228.0.2/bsd/kern/uipc_mbuf.c:2742
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x348a7978 : 0x12b0e1 (0x455670 0x348a79ac 0x133238 0x0)
    0x348a79c8 : 0x39cd77 (0x48e03c 0x3055c500 0x417f901c 0x417efd88)
    0x348a7a08 : 0x39d073 (0x30546100 0x8 0x348a7a58 0x1)
    0x348a7a28 : 0x8fbb87 (0x3053f500 0x0 0x20 0x0)
    0x348a7b98 : 0x8fbec5 (0x240982c8 0x2409a150 0x348a7be8 0x174bc2)
    0x348a7ce8 : 0x90720b (0x240aa004 0x0 0x46 0xab3b40)
    0x348a7e68 : 0x8d784a (0x240984c0 0x240984c0 0xce8a133a 0x60c)
    0x348a7eb8 : 0x8d8f3f (0x95fc80 0x95fc84 0x0 0x135e09)
    0x348a7f48 : 0x8d74b7 (0x47bb804 0x0 0x348a7f78 0x19ccc1)
    0x348a7f78 : 0x13e987 (0x47bbc94 0x47bb804 0x0 0x0)
    0x348a7fc8 : 0x19e2ec (0x0 0x0 0x1a10b5 0xb551ea0)
    Backtrace terminated-invalid frame pointer 0
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AirPort.Atheros(300.22)@0x8d6000->0x960fff
    dependency: com.apple.iokit.IO80211Family(200.7)@0x8b8000
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63c000
    dependency: com.apple.iokit.IONetworkingFamily(1.6.0)@0x64c000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    9B18
    Kernel version:
    Darwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 2007; root:xnu-1228.0.2~1/RELEASE_I386
    System model name: MacBookPro3,1 (Mac-F4238BC8)
    Message was edited by: Galoncitron

  • HP 2000 BIOS Problem, Please help me

    When I turn on my system the message that comes up is that
    HP PC Hardware Diagnostic UEF, Version 1.6.0.0 BIOS
    Memory Test
    Hard Drive check
    Language
    Exit
    This is the message that I see when I on my HP 2000, then after existing I realised some keyboards are not working, please help

    Yes it can be

Maybe you are looking for

  • How can I rename buttons in dialog popup ?

    Hello. I want rename buttons "OK", "Cancel" with my names in popups. I create new values in domen WDR_POPUP_BUTTON_KIND Next enhance interface IF_WD_WINDOW with new attributes: CO_BUTTON_CP type WDR_POPUP_BUTTON_KIND But i have problem in CL_WDR_INTE

  • My iphone is eating up data quickly. Help

    I upgraded to iphone 4 on Thursday and in less than 48 hours I've managed to use nearly a 100mb of data. The only apps I've downloaded (downloaded from pc not directly off phone) are BBC news, facebook, live profile, met office. I've switched locatio

  • Can I certify a document with Acrobat Reader ?

    Hi, I would like to know if it is possible to certify a document with Acrobat Reader. The sign toolbar button "Certify" in Reader is always disabled even if the document has not been signed. Thanks in advance.

  • This is in regards to the os x Maverick update.

    when i tried to log in the keychain box appeared and asked for my login password. from my memory i have never set up the keychain. how do i remove this box if the cancel button is not allowing me to do so?

  • Using Standart text on mail via SO10

    Hi experts, I got notification  creating an change of IT0019.everything dinamic action Feature m0001 is OK. Now I have anathor problem. in the mail box there is no subcect or mail body.empty notification mail. how I can create standart text via SO10?