Bios Password Reset/ Ran Recovery Disc Still Problems Qosmio X505-Q870 win 7

My win password quit working , so I went to bios and set the same password  several times till it let me back in to win. Now I have sign in before it boots  Black screen with blue box  says  Enter Password HDD1  Tried to reset defualt in bios its still there I have tried to reset password in bios but dont have a reset password option. Ran recovery disc and still had junk files and reg erro's ect..  1st how do I clean up the bios set up and 2nd do i need to reformat the hardrive and reinstall win with recovery disc?   Any help would be appreciated !

Peter thanx for replying ! I ran the recovery disc but it did not clear out all files, I have 5 disc and recovery set up only used 3 the last ones 64 bit encryption and Apps & Drivers  were not asked for, Were they needed for recovery?  Should I wipe HD clean with some kind of disc cleaner software ? and run recovery again ?   On the password yes my win password was not working went to bios and reset password  3 or 4 times and finally got in to win and my win password worked . I have a PC CMOS cleaner disc will that reset bios to default, I want to get the bios problem fixed before I run recover process again ! Again thanx for replying!

Similar Messages

  • Help with Bios Password Reset Service

    I am trying to use the Bios Password Reset Service for Power On password and Hard Drive Password. The current setting in the Bios is "Enabled, In Progress". The Bios sidebar help tells me that in order to complete registration for this function to open the Create Recovery Media application and "follow instructions". I am lost, there is nothing there about the Password Reset Service. I have already created the Recovery disks and even a Rescue Media disk.
    I have found that in the Client Security Solution application, under the advanced tab there is a "Setup Hardware Password Reset" function but it is greyed out!
    Since this function is available for selection in Bios shouldn't I be able to use it?
    I am using the Windows logon password recovery function in Client Security with no problems.
    Any ideas??
    Thank you!!
    Installed BIOS: 7LETC5WW (2.25-1.08) Release Date: 2009/01/08
    Client Security Solution version: 8.20.0023.00
    PS. I don't want to circumvent any passwords, I just want to activate the Hardware Password Recovery function in case I ever need it.
    Message Edited by DAF on 02-09-2009 08:52 AM
    E420, i5, 8GB, 500GB/7200, 32GB mSATA, Win 8.1 Pro x64
    T61, 4GB, 500GB Hybrid, Win 8.1 Pro x64
    Solved!
    Go to Solution.

    UPDATE:
    In case anyone cares, I was finally able to figure out how to activate the Hardware Password Reset feature in my T61. Here is the solution, at least in my case:
    1)Found the file in Program Files->Lenovo->Client Security Solution->HwPwReset.exe
    2)Ran the file and followed the instructions
    3)A "Secure Environment" was created in the hardrive and the laptop restarted
    4)The laptop booted into the Secure Environment where I was asked to establish 3 security questions and answers.
    5)The laptop restarted and the status of the Pasword Reset function in BIOS changed to Registered.
    Now if I ever forget the Power-on or Hardrive passwords all I have to do is press F12 on boot-up, select Password Reset option, answer my security questions and voila, passwords are reset or removed. Very nice!
    BTW, I called Lenovo technical support twice and after talking to 3 "techs" and one supervisor they had no clue on how to do this. Go figure!
    E420, i5, 8GB, 500GB/7200, 32GB mSATA, Win 8.1 Pro x64
    T61, 4GB, 500GB Hybrid, Win 8.1 Pro x64

  • Hp mini 110 bios password reset

    When I turn on my daughters computer it goes straight to bios password, Since i never added a password this is a problem!
    I tried pulling the cmos battery and that seems to have made the problem worse, any help would be greatly appreciated

    Hi,
    Please check your other post:
      http://h30434.www3.hp.com/t5/Notebook-Recovery/bios-password-reset-on-hp-mini-110-error-code-CNU0040...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Bios password reset for HP 6735s (not 6735b) laptop

    Recently, I managed to find a replacement board for my laptop however I found out that there was an issue with getting into the systems BIOS as there was a password set and the company I bought that board off had no clue what it was set to.
    Now I have tried all of the simple ways like removing the CMOS battery and trying the backdoor password (which I might add never worked) but still cant get into the bios to update it or change the boot sequence. I even requested some information about this issue directly to HP Support and they cant help due to the fact that the software they have to do this only work on 2009 and later models (my machine was built 2008).
    I have all the information including the UUID however cant seem to find either a DOS application that will succesfully view or reset the password or anyone that would be able to point me in the direction of such a appliocation.
    Before anyone says anything about a reset button or anything that simple, I have tried all that and have no such jumper or switch on the mainboard.

    Refer:
    http://forums.mydigitallife.info/threads/49497-HP-Probook-Elitebook-BIOS-Password-Reset-Utility?s=ad...
    Wish you luck,
    Karthik
    --Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
    --Please mark the post that solves your problem as "Accepted Solution"

  • Maestro need help also code is 75957252 for bios password reset

    maestro need help also code is 75957252 for bios password reset
    This question was solved.
    View Solution.

    Check your other post. I replied there.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • BIOS password reset on hp 6930p

    Hi All,
    Please, help me to reset bios password on my HP 6930p.
    Thanks in advance

    Tiger.
    There are no master password generators for ProBooks or EliteBooks and most business class laptops.
     If you can boot and still access a Windows OS try this first.
    HP BIOS Configuration Utility.
      http://ftp.hp.com/pub/caps-softpaq/cmit/HP_BCU.htm​​​l
     User guide here.
     http://ftp.hp.com/pub/capssoftpaq/cmit/whitepapers​​/BIOS_Configuration_Utility_User_Guide.pdf
     If not then try this.
    2. Contact HP.
     http://www8.hp.com/us/en/contact-hp/ww-contact-us.​​html?jumpid=reg_r1002_usen_c-001_title_r0003
    3. Or look at this link.
     http://forums.mydigitallife.info/threads/49497-HP-​​Probook-Elitebook-BIOS-Password-Reset-Utility
     Mazzif’s program will detect your UUID, Serial Number and model number then use that information to produce an .exe file to clear the password.
     If you find it to be too technical then.
    4. Replace the BIOS chip.
    http://www.ebay.com/itm/HP-Elitebook-2530p-2730p-6930p-8530p-8530w-8730w-Programed-Bios-Chip-No-Pass...
     If you have good soldering skills order the BIOS chip. You will receive a picture of the chips location after purchase.
    REO
    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • HP MINI 700EL Serial number--[edited] Bios password reset

    HP MINI 700 EL  
    PLEASE Bios password reset
    Serial number--[Moderator edited Serial Number]
    Please Hp mini bios password reset !
    THANKS !
    This question was solved.
    View Solution.

    You're very welcome
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • HP 1000 netbook bios password reset

    Hello, I need help with a BIOS password reset on my HP 1000 netbook. The error code is CNU9287BPQ. Any help would be greatly appreciated.
    Thanks.

    Try >> e9lo7uxp25
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • ACPI Flash BIOS version 2.60 Update Problem cause Blank Screen on Qosmio X505-Q870 HELP Needed!

    I have a Qosmio X505-Q870 that I bought 3 months ago. I updated to ACPI Flash BIOS version 2.60 today, as suggested by the Toshiba installation tools. I ran the update in Windows 7( didn't know this is dangerous) and it successfully completed, before it shuts down normally. When I try ti turn it on, the power LED is on, but the screen is blank. I tried to turn it off by pressing the power button for 20 seconds, but the computer would not turn off. What should I do now?

    I have a Qosmio X505-Q870 that I bought 3 months ago. I updated to ACPI Flash BIOS version 2.60 today, as suggested by the Toshiba installation tools. I ran the update in Windows 7( didn't know this is dangerous) and it successfully completed, before it shuts down normally. When I try ti turn it on, the power LED is on, but the screen is blank. I tried to turn it off by pressing the power button for 20 seconds, but the computer would not turn off. What should I do now?

  • Qosmio X505 - Q870 Freezing Problem PLS HELP !!!

    hello everyone
    i have toshiba qosmio x505 q870 with nvidia gts 360m. core i7 q720 @1.6
    i have this strange problem .. the laptop freezes recently alot that im not being to use it, it happens not in particular situation .. it may happen in any time in anything you are doing. last time happened, i was logging in.
    i wish to know whats the problem .. after freezing the only thing that i can do is ahard shut down by keep pressing the power button.
    i tried mem test to check the rams .. no errors i have 8gb ram.
    i tried scanning the hard disk for bad sectors .. also nth, i have 128 gb ssd
    ( the laptop came with 500gb hitachi 7200rpm, i added SSD 128gb Kingston later )
    and another 500gb seagate 7200 rpm.
    i tried replacing rams .. still happening.
    i used the laptop without battery only on power still happening.
    i used the battery alone also happened.
    i changed the windows copy yes it freezed.
    some times when it happens i take off the battery and take of the rams and keep pressing the power button to reset the laptop thing about electricity, thats what they told me .
    Then it will happen but after awhile. one time i did this thing:
    i disassembled the laptop with eveything out and did a cleaning for eveyrhing ( bearing in mind it wasnt full of dust or anything it was clean ) and then reinstalled everything in place.
    That was a while ago..
    After that it took awhile before rehappening, something about a month . and one time happened during the installtion of windows =S
    i tried eveything .. i updated all the drivers, uninstall reinstall, i did a recovery i did eveything with no results no over heating problems
    i asked the support center and they didnt figure out whats causing. they did not figure out the problem soo... to show me that they are a good costumer care center they told me that they want to replace :
    1. motherboard 280 $
    2. graphic card 600 $
    3. 2 x 4 gb ram 100 $
    4. HDD 70 $
    the laptop is out of warranty and im sure i wont do such a thing ..
    all of that to be replaced just because they did not figure out.
    and im the one whos gonna cry !
    im sure that this solution is not the right one.
    i tried four different HDD same result and as i mentioned .. one of them was during the installation of windows during the recovery ...
    i almost tried eveything i tried to run with one memory module, then the other module, and see if either provides more stability. For clarity, let's call one RAM 1 and the other RAM 2. and i have two slots; call them slot 1 and slot 2. Try RAM 1 in slot 1 with slot 2 empty. If that does not allow the system to work well, try RAM 1 in slot 2 with slot 1 empty. If that does not provide more stability, try RAM 2 in slot 1 with slot 2 empty. If that still is not stable, try RAM 2 in slot 2 with slot 1 empty. still freezing =(
    Plus .. i tried 8 different rams modules 1 in 1 , 1 in 2, 2 in 1, 2 in 2 and goes on .. etc .. still freezing .. i tried eveything humanty can do ..
    i guess im gonna buy a robot and let him set, think, work, and figure out whats causing ..
    after all im guessing its sth about electricity .. i think thats theres atiny black thing in the motherboard causing loose or giving more static or delivering more or less electricity to some parts or anything like this .
    who knows ... my humanty after i did all that made think like this .. or lets say its BY LOGIC .. Please Anyone can Help ... !!
    anyone can help =( im disperate

    A FIX THAT WORKS SO FAR!
    I have a x505 - q870 myself and have had problems with freezing for a long time - till a few days ago, it began to freeze at random times even 15 minutes after boot, making the laptop unusable. I use a cooling pad, and that didn't help either. I thought it maybe a corrupt OS, bad memory or a heating problem.
    I found this toshiba form post and on advice decided to unseat and reseat the CMOS battery. WARNING: this takes time and patience, you have to disassemble the entire laptop to get to the motherboard. I'll attach an X505 service manual that I found a while ago.
    While getting to the CMOS battery, I also discovered that the fans had a carpet layer of dust/lint covering the rear vents (after 2 years heavy travel and use). I cleaned these out (with air), unseated and reseated the battery, and reassembled the laptop. You will have to update system time on first boot. VOILA! I have had the laptop working for two days now, no freezing yet! I am guessing a couple of reasons:
    1. Hard resetting the motherboard did something magical - worth a try.
    2. Cleaning dirt blocking vents under the motherboard definitely helped heating issues. You may not have this problem. But in any case, do you use a cooling pad?
    If you are out of warranty (like me) and have some technical knowledge, I suggest you give this a try. Since I did this I have not had a freeze yet after constant use! This after having repeated freezes every hour of use is definitely an improvement.
    Attachments:
    x505 manual.pdf ‏6441 KB

  • Qosmio x505-q870 system recovery?

    How to I restore back to factory, I been trying to figure this out for a couple of days, but I get now where. I have make to 5 disc required twice. but i dont know how to do it. I tried the advance recovery in the control pannel but I get error messages on both the system image option and the reinstall windows option.

    Qosmio X505-Q870
    How to I restore back to factory, I been trying to figure this out for a couple of days, but I get now where.
    RTFM?
    See the section Recovering the Internal Storage Drive, which begins on p. 60 of the User's Guide.
       Qosmio X500 Series User’s Guide
    -Jerry

  • HP DV6 recovery disc require problem

    Hi there, i just bought a hp dv6 laptop.
    After i change my system locale, win7 restart.
    But then it keep asking me insert my win7 disc.
    As i just got my laptop, so i didint make any recovery disc yet.
    Whatever i rest my laptop, i sitll cant fix this problem.
    I try to press F11,  but still ask me recovery disc.
    What i can do?  I cant get in to the windows7. Is anybody can help me?

    Hi, Steve,

  • Bios password reset

    I have been using my laptop Compaq Presario V3000 with service tag v3070TU from last eight years. This laptop is also being used by my kids for playing games. As we know that there are two types of BIOS password i.e. "Supervisor" and "User". I had kept both passwords separate. For myself, I kept Supervisor password. Kids also kept their own User password.  I was in view that I can change ”User" password whenever I wish as I was using Supervisor password.  The time went by. The kids changed "User" password as they wished. Later I purchased Desktop for them.  Again the time passed and for opening the laptop I always used my own  ”Supervisor" password. No issues. The kids forgot their own password. But I was assured that I will change it whenever required. So few days back I thought to change the password kept by kids. To my surprise, I was unable to change the password. I search many forums and tried to reset the password as per procedure laid by HP. but all efforts failed. Then I thought may be upgrading BIOS will reset the password to default. So
    I upgraded the Bios to the latest one F.25 (phoenix BIOS) to my surprise, my laptop still wanted the password to boot. Though I could do all the office work on my laptop but still I always felt handicap due to password issue.
    Yesterday I thought why not to clear my “Supervisor” password  so that it may not ask any password during boot. So I entered BIOS and navigated to supervisor password, pressed enter twice, and got alert that password is removed. Saved, rebooted and It again asked for password. Now my Supervisor password is also not working, even pressing “Enter” during boot is not working.  Now I cannot enter in setup also.
    Please help.

    Take a look at this thread soniass and let me know if it helps,
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Compaq mini C bios password reset FOR CODE CNU0092JXJ

    please i need help to reset my compaq mini cq10 CNU0092JXJ bios password
    This question was solved.
    View Solution.

    Hi,
    Enter:      e9l11o7w4w            ( Note that in both cases, the 3rd character is a lower case L )
                                or
                      e9l11o7wrw
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Compaq mini cq10 bios password reset

    Hello I have a compaq mini cq10 and I have removed the cmos battery but it still asks for a bios password on startup .
    sn#  cnu0024tvr 
    I have seen in other posts that it has been solved.. but the passwords issued there have so far been unsuccessful.
    So I assumed they may be sn# specific.
    Any help would be greatly appreciated. 
    Thanks in advance!
    This question was solved.
    View Solution.

    Hi,
    Try entering:     e9l117va6b      ( 3rd character is a lower case L )
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for

  • Moving music from one computer to another using an iPod?

    Thing is I want to buy a new laptop soon, and I'd like to move my music from my old computer to the new one, but I'd like to use my iPod 160GB as a hard disk to transport it, I've copied my music and video files along with other important data into f

  • Finder file info again stopped showing

    iMac 7,1; Mac OSX 10.6.8 My user preferences have become modified/corrupted at least twice recently, and I'm wondering what is the cause. Back on 5 March 2015 I posted that finder had stopped showing file info Finder stopped showing file info, and wh

  • Hi how can I contact apple by email cos I can't find it.thanks

    Hi how can I contact apple by email cos I can't find it.thanks

  • Power Management Driver wont install - SL500, Windows 7

    Hi All, I've been trying to get my blue Fn keys to work on my recently purchased SL500.  Volume and screen brightness keys work (but no on-screen display), however Fn+F3 & F5 do nothing, same with the blue ThinkVantage button.  I've installed the dri

  • Internal Agent not working.

    Hi, I recently upgraded ODI from version 10.1.3.5.1 to version 10.1.3.5.6,we do development in house and mostly use the "Internal agent(no agent)" to execute our packages and interfaces.I was always able to restart a failed session using the "Local A