Bios pasword reset
I have problem with my mini bios password the eror code is cnu946c9yp pls i need an urgent respon
Welcome Od.
Did you check your other post.
If not.
Try.
e9lovgeoi2
Third letter lowercase L.
Just a note - if you participate in this thread I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.
Similar Messages
-
BIOS PASWORD RESET HP MINI 110
I have a friend a HP Mini 110 Model 110-1020la
I have try all the posible passwords, but only gets the following message..
Password Check failed
Fatal error... System halted.
CNU933031MP
Thanks for your help
This question was solved.
View Solution.Hi,
You're welcome
While the problem with the keyboard could well be a hardware issue, it's always worth trying the following.
Open windows Control Panel, open Device Manager, expand Keyboards, right click 'Standard PS/2 Keyboard' and select Uninstall.
When complete, shut down the notebook.
Then unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Compaq mini 110 Bios pasword reset
compaq mini 110 CNU9275YOM pls master code... Thanks
Remove the bios battery and the battery waited for 2 days. When I try to reinsert the password again asked me.
-
I have forgotten the BIOS password for Folio13 2000. After several attempts, I receive the following message. System Disabled: 50477192
This question was solved.
View Solution.You're welcome
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Help with Bios Password Reset Service
I am trying to use the Bios Password Reset Service for Power On password and Hard Drive Password. The current setting in the Bios is "Enabled, In Progress". The Bios sidebar help tells me that in order to complete registration for this function to open the Create Recovery Media application and "follow instructions". I am lost, there is nothing there about the Password Reset Service. I have already created the Recovery disks and even a Rescue Media disk.
I have found that in the Client Security Solution application, under the advanced tab there is a "Setup Hardware Password Reset" function but it is greyed out!
Since this function is available for selection in Bios shouldn't I be able to use it?
I am using the Windows logon password recovery function in Client Security with no problems.
Any ideas??
Thank you!!
Installed BIOS: 7LETC5WW (2.25-1.08) Release Date: 2009/01/08
Client Security Solution version: 8.20.0023.00
PS. I don't want to circumvent any passwords, I just want to activate the Hardware Password Recovery function in case I ever need it.
Message Edited by DAF on 02-09-2009 08:52 AM
E420, i5, 8GB, 500GB/7200, 32GB mSATA, Win 8.1 Pro x64
T61, 4GB, 500GB Hybrid, Win 8.1 Pro x64
Solved!
Go to Solution.UPDATE:
In case anyone cares, I was finally able to figure out how to activate the Hardware Password Reset feature in my T61. Here is the solution, at least in my case:
1)Found the file in Program Files->Lenovo->Client Security Solution->HwPwReset.exe
2)Ran the file and followed the instructions
3)A "Secure Environment" was created in the hardrive and the laptop restarted
4)The laptop booted into the Secure Environment where I was asked to establish 3 security questions and answers.
5)The laptop restarted and the status of the Pasword Reset function in BIOS changed to Registered.
Now if I ever forget the Power-on or Hardrive passwords all I have to do is press F12 on boot-up, select Password Reset option, answer my security questions and voila, passwords are reset or removed. Very nice!
BTW, I called Lenovo technical support twice and after talking to 3 "techs" and one supervisor they had no clue on how to do this. Go figure!
E420, i5, 8GB, 500GB/7200, 32GB mSATA, Win 8.1 Pro x64
T61, 4GB, 500GB Hybrid, Win 8.1 Pro x64 -
I have HP compaq NC6120 ,can you please tell me how to reset bios pasword.I thry with CMOS battery remove but it didnt help.When i power on my NC6120 i have blue screen which says POWER ON PASWORD. Can ypu help me please.
Please perform the instructions given in 1.2 section of the service guide which is available in the following weblink to clear all the CMOS passwords:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/action.process/public/psi/manualsDisplay/?s...
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!*** -
I need to reset my bios pasword on my laptop hp compaq 6530b, i tried to remove the batery which is located under the HDD but it didint work... Anyone Help
Hi,
The password will be stored in non-volatile memory so removing the RTC battery will not work and as this is a business class machine, there is no 'backdoor' password option. Your best option is to contact HP regarding this.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
MSI 870A Fuzion.... BIOS keeps resetting it self after restart,
HI NOOB here
I've just brought my first ever parts for my first ever computer build.....fitted everything perfectly and booted....
1st: logo screen came on
then another screen came saying low battery, thunxsomething...IDE, bios clock unset...."hard drive not detected"
3rd: screen came up asking either f1 to go into bios f2 to load defualts
i pressed f2 little dash flashes in the top corner
rstarted with second {the same procedure as explained }try ubuntu live usb loads......
after shutdown and installation of OS
i attempt to troublkeshoot the issue of bios time, IDE, and no hard drive detected
by going into the bios... which was totally from whats expected i.e. in colomns instead rows
i was expecting bios style shown below however after thought i got adjusted to the new rows one
http://www.tomshardware.com/reviews/x48-motherboard-comparison,1781-5.html
loaded optimal settings, changed bios clock and date, adjusted boot preority
saved AND EXITED
BUT foud that my MSI 870A Fuzion.... BIOS' keeps resetting it self to factory defualt... ,
AND>>>>>>>>>>>>>>>>>>>>>>>>>
also found that it didn't go directly into the NEwly installed OS.....
HELPHELPHELPHELPHELPHELPHELPHELPHELPHELPHELPHELP
I'm its quit anoying knowing that this is my first ever computer buildQuote from: npm1 on 18-November-10, 22:29:03
it restarts as expected but it doesn't save it........and it continues saying no hard disk detected low battery even though its connected to psu and say IDE....even though i have sata connectors......
just as an extra, a small splat of water went on the board i simply wiped it away........(happened before first boot) would this by any chance affect the bios
Quote
it restarts as expected but it doesn't save it........and it continues saying no hard disk detected low battery even though its connected to psu and say IDE....even though i have sata connectors......
what message exactly you are getting at bios post screen? -
Hp mini 110 bios password reset
When I turn on my daughters computer it goes straight to bios password, Since i never added a password this is a problem!
I tried pulling the cmos battery and that seems to have made the problem worse, any help would be greatly appreciatedHi,
Please check your other post:
http://h30434.www3.hp.com/t5/Notebook-Recovery/bios-password-reset-on-hp-mini-110-error-code-CNU0040...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Maestro need help also code is 75957252 for bios password reset
maestro need help also code is 75957252 for bios password reset
This question was solved.
View Solution.Check your other post. I replied there.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
I have been using my laptop Compaq Presario V3000 with service tag v3070TU from last eight years. This laptop is also being used by my kids for playing games. As we know that there are two types of BIOS password i.e. "Supervisor" and "User". I had kept both passwords separate. For myself, I kept Supervisor password. Kids also kept their own User password. I was in view that I can change ”User" password whenever I wish as I was using Supervisor password. The time went by. The kids changed "User" password as they wished. Later I purchased Desktop for them. Again the time passed and for opening the laptop I always used my own ”Supervisor" password. No issues. The kids forgot their own password. But I was assured that I will change it whenever required. So few days back I thought to change the password kept by kids. To my surprise, I was unable to change the password. I search many forums and tried to reset the password as per procedure laid by HP. but all efforts failed. Then I thought may be upgrading BIOS will reset the password to default. So
I upgraded the Bios to the latest one F.25 (phoenix BIOS) to my surprise, my laptop still wanted the password to boot. Though I could do all the office work on my laptop but still I always felt handicap due to password issue.
Yesterday I thought why not to clear my “Supervisor” password so that it may not ask any password during boot. So I entered BIOS and navigated to supervisor password, pressed enter twice, and got alert that password is removed. Saved, rebooted and It again asked for password. Now my Supervisor password is also not working, even pressing “Enter” during boot is not working. Now I cannot enter in setup also.
Please help.Take a look at this thread soniass and let me know if it helps,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
BIOS password reset on hp 6930p
Hi All,
Please, help me to reset bios password on my HP 6930p.
Thanks in advanceTiger.
There are no master password generators for ProBooks or EliteBooks and most business class laptops.
If you can boot and still access a Windows OS try this first.
HP BIOS Configuration Utility.
http://ftp.hp.com/pub/caps-softpaq/cmit/HP_BCU.html
User guide here.
http://ftp.hp.com/pub/capssoftpaq/cmit/whitepapers/BIOS_Configuration_Utility_User_Guide.pdf
If not then try this.
2. Contact HP.
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html?jumpid=reg_r1002_usen_c-001_title_r0003
3. Or look at this link.
http://forums.mydigitallife.info/threads/49497-HP-Probook-Elitebook-BIOS-Password-Reset-Utility
Mazzif’s program will detect your UUID, Serial Number and model number then use that information to produce an .exe file to clear the password.
If you find it to be too technical then.
4. Replace the BIOS chip.
http://www.ebay.com/itm/HP-Elitebook-2530p-2730p-6930p-8530p-8530w-8730w-Programed-Bios-Chip-No-Pass...
If you have good soldering skills order the BIOS chip. You will receive a picture of the chips location after purchase.
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress. -
HP MINI 700EL Serial number--[edited] Bios password reset
HP MINI 700 EL
PLEASE Bios password reset
Serial number--[Moderator edited Serial Number]
Please Hp mini bios password reset !
THANKS !
This question was solved.
View Solution.You're very welcome
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP** -
Need bios pwd reset for pavilion 15-n013dx win8 halt-code 65925557
need bios pwd reset for pavilion 15-n013dx win8 serl# [Edited for Personal Information] halt-code 65925557
An aquaintance used the laptop and set the bios password. I see you have a way to run the halt-code towards an access-code. It's an allmost new PC and I would rather not take it apart looking for the reset pins.
This question was solved.
View Solution.Nfd try.
70683599
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress. -
HP 1000 netbook bios password reset
Hello, I need help with a BIOS password reset on my HP 1000 netbook. The error code is CNU9287BPQ. Any help would be greatly appreciated.
Thanks.Try >> e9lo7uxp25
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**
Maybe you are looking for
-
Loops and system timestamp not synchronized
Running Labview 8.6.1 on Windows 2000, loops and system timestamp (Windows clock) seem to use different time bases; one second in a loop is not exactly as long as a second in system time. If i run a simple VI as in picture, with a 1-second loop which
-
please. waiting for your replies.
-
How do I remove an active phone from my itunes account
Long story short...One of my kids logged into our iTunes account ON my grandmothers iPhone. We thought it was removed from our account, however, last night my husband was trying to activate his new work iPhone. He didn't complete it. Fast Forward to
-
Receiver IDoc Adapter - Outbound IDocs in IDX5 but stucked in SM58
Hi Gurus, I have a Receiver IDoc issue with the above error. My message is successful in the IE pipeline (but with error on outbound side) I can even view the generated IDoc numbers for those messages in IDX5, but when double-clicking on those IDX5
-
Hi all, there is a problem with the customization of the ring graph in the Reports Builder. I didn`t find any paramaters which would change the inner diameter of the ring graph. Is there any possibility to do that? In case yes, please send me how to